Lathes

turning diameter over bed 0480 mm︱turning diameter over slide rest 350 mm︱turning length 1000 mm︱spindle bore 65 mm︱spindle turning speed range 22 - 2200 U/min︱spindle drive 15 kW︱feeds 0,05 - 20 mm/U︱face slide travel 240 mm︱ 110 mm︱bed width 400 mm︱tailstock quill diameter 75 mm︱tailstock quill stroke 200 mm︱tailstock taper MT 5 ︱total power requirement 18 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 3,5 x 2,2 x 1,7 m︱

---

- with rapid feed in carriage - Accessories: MULTIFIX-tool post with various inserts, 3 jaw chuck and DRO.

turning diameter over bed 680 mm︱turning diameter over slide rest 415 mm︱turning length 2200 mm︱total power requirement 22 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. m︱

---

turning diameter 60 mm︱turning length 200 mm︱number of slides ︱total power requirement 20 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

turning diameter 0260 mm︱turning length 580 mm︱control 840 D Siemens︱centre height 190 mm︱turning diameter over bed 500 mm︱turning dia. over face-slide 365 mm︱Main spindle: ︱turning speed range - main spindle max. 6.000 min/-1︱power capacity - main spindel 10 / 7,5 kW︱max. Torque 115 / 86 Nm︱spindle diameter in front bearing 100 mm︱spindle bore 68,5 mm︱usable bar diameter 52 mm︱chucking diameter 210 mm︱axis stroke: ︱travel -x axis 185 mm︱travel -z axis 580 mm︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30 ︱

---

CNC - Lathe with sub spindle. Control Siemens 840 D. Machine has Y- axe and live tooling. We supply an IEMCA Kid 70 bar loader along with the machine.

turning diameter over bed 0520 mm︱turning length 770 mm︱control 18 i Fanuc︱turning diameter over bed slide 230 mm︱spindle turning speed - stepless 45- 5000 U/min- rpm︱spindle bore 65 mm︱feeds 0-30 m/min︱rapid power traverse in X-and Z direction 30 m/min︱voltage 400 V︱connected load 30 KVA︱face slide travel 190 mm︱longitudinal travel 720 mm︱dimensions of the machine ca. 3,2 x 2 x 2,3 m︱toolpiece turning speed range 0- 5000 U/min︱work piece power 5,5 kW︱main drive motor 15/22 kW︱weight of the machine ca. 5,6 t︱y-axis 100 (+/- 50) mm︱c-axis 360 x 0,001 °︱

---

Has two 12 position turret heads with live tooling (C- axe), one with Y axe, sub spindle, power chuck, cooling arrangement and chip conveyor. Control: Fanuc 18 i. With many accessories.

turning diameter over bed 0280 mm︱turning length 515 mm︱control 810D Siemens︱turning diameter over bed slide 240 mm︱spindle turning speed - stepless 0- 6000 U/min- rpm︱spindle bore 80 mm︱feeds 0- 15/24 m/min︱voltage 400 V︱connected load 32 KW︱face slide travel 200 mm︱longitudinal travel 530 mm︱dimensions of the machine ca. m︱taper diameter VDI 20 mm︱main drive motor 24 kW︱

---

Machine has 16 position turret with 8 pos. live tooling. Machine is without tailstock ! We will supply holder also for live tooling and a chuck along with the machine.

turning diameter 250 mm︱turning length 100 mm︱control SIEMENS 840 D ︱total power requirement 35 kW︱weight of the machine ca. 7500 kg︱dimensions of the machine ca. m︱

---

E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

turning diameter 200 mm︱turning length 400 mm︱control SIEMENS SINUMERIC 840 C ︱total power requirement 40 kW︱weight of the machine ca. 6.500 kg︱dimensions of the machine ca. m︱

---

turning diameter 300 mm︱turning length 710 mm︱control SIEMENS SINUMERIC 840 ︱total power requirement 40 kW︱weight of the machine ca. 6000 kg︱dimensions of the machine ca. m︱

---

I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____________________________________________________________ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

turning diameter 250 mm︱turning length 400 mm︱control C 200 / 8 ︱total power requirement 60 kW︱weight of the machine ca. 8,5 t︱

---

Swing Ø above bed, max. 300 mm Max. turning Ø for chucking work, approx. 250 mm Travel of Slides: Turret 1, X / Z travel 163 / 550 mm Turret 2, X / Z / Y travel 140 / 250 / 260 mm Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5,000 rpm Feed range 0 - 15,000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories / Special Features * SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. * Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. * Spindle indexing and positioning device, 7.5°. * Hydraulic high-power chuck (hollow clamping cylinder Ø 65 mm). Manufacturer: ROHM, Model HS 200/3-66, and ROHM Power Chuck, Model KFD HS 137 in the opposed spindle. * Driven tools in Turrets 1, 2 and 3, drive approx. 6 kW each. Tool stations: 8 / 12 / 8 + 28 tools in magazine = 55 tools altogether. * Tool measuring device for Turret 1. * Tool disk magazine for Revolver No. 2 with 28 tool positions and automatic tool changer. * Backwork is possible using the control unit for the 3rd turret. * Coolant device with large chip conveyor. * Automatic sliding doors. * Various other accessories. Price, ex stock EUR 49,000.-- Ideal machine for heavy and complex turned parts. Complete processing is possible, including backwork. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have a selection of CNC lathes available. Please let us know your requirements

turning diameter 42 mm︱turning length 250 mm︱control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

CNC-lathe with bar feed with Sameca bar feed

turning diameter 250 mm︱turning length 450 mm︱control TX8D ︱bore 80 mm︱spindle speed: 3150 U/min.︱

---

CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details.

turning diameter 1250 mm︱swing diameter 1160 mm︱turning height 800 mm︱faceplate diameter 1000 mm︱total power requirement 97 kW︱weight of the machine ca. 25000 t︱dimensions of the machine ca. m︱

---

P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _______________________________________________________ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 " Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V - 50 Hz Weight, approx. 25,000 kg Accessories / Special Features * CNC Contouring Control Model NUM 760 TX in 3 axes, with graphics, menu-guided dialogue programming, and all the usual options, cycles and sub-programs; with tool compensation, thread cutting cycles, constant speed programming, etc. * 2-axis CNC tool slide (1,300 x 800 mm) with driven tool holders, ISA 50 / 22 kW. * Tool changer with 16 tool holders, max. length 450 mm, max. weight 40 kg. * Pallet changing system, pallet size 630 x 630 mm, with setup station with indexing and drive of the pallet, and 2 separate pallet stations. * 3 pallets, 630 x 630 mm. * 3-jaw chuck, Ø 650 mm. * Face plate, Ø 900 mm. * Chip conveyor. * Band filter coolant equipment. * Completely covered working area, including safety fence for the pallet changing area. * Separate switch cabinet. * Operating manual. * Approx. 20 tool holders. * Various other accessories. High performance universal turning and milling centre for full range of machining (turning, boring, drilling, milling, and threading) with high speeds and high turning volume. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have a selection of modern lathes available. Please let us know your requirements

faceplate diameter 0 mm︱turning diameter over slide rest 900 mm︱turning length 1.000 mm︱total power requirement 25 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱

---

Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine is suitable for complicated, high precision copying of heavy workpieces.

turning diameter 0500 mm︱turning length 1500 mm︱control 802 C ︱turning dia. over face-slide 280 mm︱spindle bore 82 mm︱spindle turning speed range 20- 3000 U/min︱feeds - longitudinal 0- 5000 mm/min︱feeds - cross 0- 5000 min︱rapid traverse longitudinal 5 m/min︱rapid traverse cross 5 m/min︱main drive 7,5 kW︱travel -z axis 1435 mm︱travel -x axis 295 mm︱quill stroke 150 mm︱bed width 350 mm︱weight of the machine ca. 3 t︱dimensions of the machine ca. 3,23 x 1,47 x 1,73 m︱

---

Cycle control Siemens 802 C

turning diameter over bed 500 mm︱turning diameter over slide rest 1150 mm︱turning length 1040 mm︱Control ︱total power requirement 12 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. m︱

---

turning diameter 400 mm︱turning length 915 mm︱control NUM Type 1062 T ︱total power requirement 12,5 kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. m︱

---

turning diameter over bed 50 mm︱spindle passage 26 mm︱turning length 275 mm︱total power requirement 12 kW︱weight of the machine ca. 4500 kg︱

---

CNC-Sliding Headstock Lathe, Opposite Headstock