Bevel Gear Testing Machine

ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱spindle speeds (infinitely variable) 6000 U/min︱work piece spindle speed 1200 U/min︱diameter of tools max. 230 mm︱diameter of tools min 69,85 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱b-axis + 90,1 / - 1 °︱work piece table - Ø 212,71 mm︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱

---

Hoffmann coolant filter system ERK 140-V(L-C) (built 2008) VT oil mist filter system

ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱diameter of tools min 69,85 mm︱tooth width max. 58 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control 160 i - MB FANUC︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱

---

WAGURI with EWAB robot cell (KUKA Robot) no coolant filter system available

ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱diameter of tools min 69,85 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱

---

WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available

max. wheel diameter 215 mm︱gear width 40,65 mm︱max. module ︱total power requirement 20 kW︱weight of the machine ca. 10 t︱

---

Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

max. wheel diameter 1010 mm︱gear width 0 mm︱max. module ︱min. module ︱total power requirement 15 kW︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. m︱

---

Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

max. wheel diameter 500 mm︱gear width 200-400 mm︱module 12 ︱turning speeds 0-3250 U/min︱bracke pressure bis max. 95 Nm︱inner taper Konus #39 ︱Control Fanuc 16︱total power requirement 15 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm︱

---

max. wheel diameter 400/500 mm︱CNC-Control GE FANUC Series 160i-M ︱pinion diameter - max. 400 mm︱crown gear diamter max. 500 mm︱x-axis +/- 70 mm︱y-axis 200 mm︱z-axis 200 mm︱axis angle 90 Grad︱speeds: R 0 - 3000 / T 0 - 5000 1/min︱rated current 30 kVA︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. 3,2 x 2,5 x 2,3 m︱

---

The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axle angle of 90° Bevel gear analysis ROTEC T50 GA2 Color unit company Binks

max. wheel diameter 400 mm︱gear width 0 mm︱module ︱pinion diameter - max. 254 mm︱axial cross angle 90 °︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

G L E A S O N (USA) Hypoid Spiral Bevel Gear Running Testing Machine Model 513 TESTER, Year 1975, Serial No. 721607 This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is "loaded" with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automatic. The gear quality can be assessed by recording the harmonic frequencies, which are displayed on a separate monitor and which can be analyzed with a RHF Control. Machine can be used for soft testing of production parts, as well as for mating sets of hardened gears and pinions prior to lapping, and for final testing after lapping to select the optimum pinion mounting distance. Also ideal for lab work, processing, and quality control. Max. gear outside diameter, approx. 508 mm Max. pinion outside diameter, approx. 254 mm Axial cross angle 90 ° Offset of pinion spindle above/below gear spindle, max. 102 mm Diameter of taper hole, pinion spindle 99/95 mm Diameter of taper hole, gear spindle 56/55 mm Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm Speeds of gear spindle, infinitely variable 0 - 1,250 rpm Spindle drive, approx. 5 / 7.5 kW Total electrical load, approx. 15 kW - 380 V - 50 Hz Accessories / Special Features * Large display for 1 / 2 / 3 harmonies, display for pinion distance, pinion speed, as well of gear torque in kg/torque, etc. * Hydraulic workpiece clamping. * Hydraulic slide clamping. * Tank for marking compound with mixer and pump, separate. * Separate switch cabinet. * Separate hydraulic unit. * Lots of spare parts, spare motors, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.