Gear Hobbing and Shaping Mach. -combined

ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱spindle speeds (infinitely variable) 6000 U/min︱work piece spindle speed 1200 U/min︱diameter of tools max. 230 mm︱diameter of tools min 69,85 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱b-axis + 90,1 / - 1 °︱work piece table - Ø 212,71 mm︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱

---

Hoffmann coolant filter system ERK 140-V(L-C) (built 2008) VT oil mist filter system

ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱diameter of tools min 69,85 mm︱tooth width max. 58 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control 160 i - MB FANUC︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱

---

WAGURI with EWAB robot cell (KUKA Robot) no coolant filter system available

ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱diameter of tools min 69,85 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱

---

WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available

max. wheel diameter 215 mm︱gear width 40,65 mm︱max. module ︱total power requirement 20 kW︱weight of the machine ca. 10 t︱

---

Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

max. wheel diameter 1010 mm︱gear width 0 mm︱max. module ︱min. module ︱total power requirement 15 kW︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. m︱

---

Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

amount ca. 103 STK︱

---

Various gear shaping tools (approx. 103 pcs.) Make: Lorenz/Liebherr/PWS/Deltal etc. Various gear shaping tools (approx. 103 pcs.) in different sizes and modules. an: - Disc cutting wheels with and without staircase grinding - Bell cutting wheels with and without step grinding - Shank cutting wheels

Control Siemens 840 C ︱max. module 3 ︱max. workpiece diameter 150 mm︱smallest to mill number of teeth 4 ︱ambient temperature +12°C...+40°C ︱Relative humidity max 90% bei 20°C, max 50% ︱Resolution accuracy 0,1° ︱Milling head swivel spindle +/-45° ︱Toolpiece table load 17 kN︱details shaping unit ︱biggest width of teeth at 23 mm︱max helix angle 45° ︱axisangleadjustment shaping spindle-workpiecetable -0,5°...3.000 DH/min ︱feed rotation axe tool 10...9.420 mm/min ︱feed radial axis machine stand 330-18500 ︱max. behind shaping angle 12° ︱milling head Motorfräskopf ︱hob turning speeds 150...1500 U/min︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱

---

Twin-gear-wheels can be manufactured in one operation on the machine. Machine was upgraded to Siemens control 840 D retrofitted. Machine is in very good condition.

19147 ︱weight of the machine ca. 4 t︱working width max. 300 mm︱extensive accessories viele Wechselräder ︱max. module 7 Module ︱

---

weight of the machine ca. 5 t︱working width max. 300 mm︱ 6 ︱extensive accessories viele Wechselräder ︱

---

max. wheel diameter 350 mm︱gear width 350 mm︱max. module 8 ︱min. module ︱total power requirement 7,5 - 22 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Gear hobber with gear shaping device, 2-cut cycle

module 1,0 mm︱tool taper MK 3 ︱turning speeds von 169 bis 2500 U/min.︱ ︱distance Fräser-Werkstück: 10 - 50 mm︱weight je Stück: 500 kg︱documentation vorhanden ︱number 8 Stück︱ ︱

---

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++