Window production wood

---

---

---

---

---

Bäuerle grand piano stop table --------------------------------- With Powasert, automatic screw feeder and Somatec hardware punch (customer processed Maco Multimatic. Support tables dimensions: length 2,380 mm, depth 1,390 mm

- ︱Working width - mm︱ - ︱

---

Number of machnines - ︱Loading meters, approx. - ︱Total weight, approx. - ︱

---

Assembly line consisting of: Item 1.0 / 0610005 RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2.0 / 10603200 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3.0 / 614-601 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155 Warranty 12 months excluding wearing parts Documentation 1-fold digital in German including CE declaration of conformity Item 4.0 / 10229018 Vacuum lifter with integrated electric chain hoist 90° / 200 kg for vertical and horizontal transport of flat, sealed glass panes. Vacuum generation with pneumatic ejector Push-off device for quickly releasing the plates and releasing the load only by double actuation (2 buttons) Safety vacuum storage including check valve is required by law. Audible safety warning device and vacuum pressure gauge with red/green area Energy saving device for vacuum generation and stroke safety circuit Pneumatic swivel unit with swivel range 90° Load capacity: 0-200 kg Lifting speed: 0-10m/min continuously using Frequency converter Lifting height: approx. 1.8m Operating voltage: 1x230V/50Hz Operating pressure: at least 6-7 bar of filtered compressed air Air consumption: approx. 1NI/sec. Weight: approx. 75 kg Painted in RAL 1018 zinc yellow Recording with a longitudinal beam and 4 pieces Suction plates D=290 mm Adjustment range, external dimensions of the suction plate Vertical 600-1000 mm Horizontally 800-1000 mm Comfort control The comfort control includes stepless raising and lowering through a frequency converter (required for gentle hanging up), All commands for the hoist and the vacuum lifter are in one common control unit - Special handling switch - housed. This makes it easier to operate the system and manage it Load possible in one-hand operation. Assembly - slewing crane and instruction on wing assembly table with aluminum screw machine Price on request! Packaging Price on request! transport Price on request! (Technical description according to manufacturer - no guarantee!)

0 ja, 30 Faecher ︱Working width 2250 mm︱0 nein ︱

---

Ruchser RU-BM 2500 ---------------------- Fitting table with fitting shelf 30 compartments with olive drilling rig Uniqick 2000 screw magazine with feed to the hand screwdriver Selling ex location, can still be viewed in use! (technical information according to the manufacturer - without guarantee!)

0 ja ︱Working width 2500 mm︱0 nein ︱Dimensions (L/W/H) 3200 x 2000 x 2160 mm︱

---

Ruchser RU-BM-2500 fitting center with fitting storage, mobile ------------------------------------------------------ Pivoting stops Pneumatic magazine screwdriver Fittings shelf 30 compartments with lower storage compartments Support table covered with felt Special screwdriver Screw feeder fitting punch Mobile table Wood thickness 90 mm possible. Customer processed Siegenai Titan AF fitting. Can be adjusted to other fittings. Overall dimensions with shelf approx.: 3200 mm x 2000 mm x 2160 mm Dimensions of work table approx: length 2520 mm, depth 1,370 mm (Technical information according to manufacturer - no guarantee!)

---