,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Mixing

          Machinelist: Mixing


          Mixing mill

          used Mixing Mixing mill C2 DUPLO 700 duplocom


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A160302 · Mixing mill

          C2 - DUPLO 700 duplocom - - neu -

          Technical details
          roll diameter 350 mm︱roll length 700 mm︱rolls drilled peripher ︱Nip adjustment hydraulisch 0︱total power requirement 2x 15 kW︱
          Condition: new, with CE marking, with 2 year warranty Specification: rolling mill 350 x 700 mm - new - roll diameter: 350 mm - roll length: 700 mm - Multidrive model: single drives - roll bore: peripheral - Roll bearing: bearing with grease lubrication - nip adjustment: hydraulic - Hydraulic unit for nip adjustment - tilting guide plates made of nylon-polyethylene material - stainless steel tank - bi-directional safety bars - Siemens AC brake motors: 2 pieces, each 15 kW, 400 V, 50 Hz - bevel gear angle: 2 pieces make Motovario - painting: with RAL colors according to customer's request - complete machine protection with stainless steel carters - electrical switchboard - electrical system and on-board system machine - control panel with touch panel 7", type KTP700 Basic - PLC system: brand Siemens type: S7-1200 - inverter system: 2 pieces, brand Siemens, for regulation the speeds per roller - Remote maintenance facility - Safety devices: according to standard requirements EN 1417:3.2015 CE marking Operating and maintenance manual in English or German new machine with 2 year warranty in accordance with the standard requirements Additional options at an extra charge: - Pneumatic strip cutting unit with two-hand operation, safety checks to obtain a strip
            roll diameter 350 mm
            roll length 700 mm
            rolls drilled peripher
            Nip adjustment hydraulisch 0
            total power requirement 2x 15 kW
            Description :
            Condition: new, with CE marking,
            with 2 year warranty

            Specification: rolling mill 350 x 700 mm - new

            - roll diameter: 350 mm
            - roll length: 700 mm
            - Multidrive model: single drives
            - roll bore: peripheral
            - Roll bearing: bearing with grease lubrication

            - nip adjustment: hydraulic
            - Hydraulic unit for nip adjustment
            - tilting guide plates made of nylon-polyethylene material
            - stainless steel tank
            - bi-directional safety bars
            - Siemens AC brake motors: 2 pieces, each 15 kW, 400 V, 50 Hz
            - bevel gear angle: 2 pieces make Motovario


            - painting: with RAL colors according to
            customer's request
            - complete machine protection with stainless steel carters
            - electrical switchboard
            - electrical system and on-board system machine
            - control panel with touch panel 7", type KTP700 Basic
            - PLC system: brand Siemens type: S7-1200
            - inverter system: 2 pieces, brand Siemens, for regulation
            the speeds per roller
            - Remote maintenance facility
            - Safety devices: according to standard requirements
            EN 1417:3.2015 CE marking
            Operating and maintenance manual
            in English or German

            new machine with 2 year warranty in accordance with the
            standard requirements

            Additional options at an extra charge:
            - Pneumatic strip cutting unit with two-hand operation,
            safety checks to obtain a strip



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill Walzwerk Labor 250x500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A200702 · Mixing mill

          Walzwerk - Labor 250x500 - - NEU -

          Technical details
          roll diameter 250 mm︱roll length 500 mm︱rolls drilled peripher ︱Nip adjustment hydraulisch ︱total power requirement 2x 5,5 kW︱
          Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monobloc laboratory rolling mill 250 x 500 mm - new - roll diameter: 250 mm - Roll length: 500 mm - Roll bore: peripherally drilled - Single drives: variable friction ratio - Roller bearing: roller bearing with manual grease lubrication - Gap adjustment: hydraulic - new hydraulic unit for roller nip and emergency system - New rotary unions make Johnson-Fluiten - two adjustable guide plates to adjust the working range on the rollers. - tiltable guide plates made of nylon-polyethylene Material - Stainless steel tank - New safety cage - 2x AC brake motors make Siemens: 5.5 kW each, 400 V, 50 Hz - Painting: with RAL colours according to customer's request - New electrical control cabinet - 2x frequency inverters make Siemens, for variable speed of the rollers - The braking angle is monitored via the touch panel - new operating panel with touch panel, Siemens KTP700 Basic - new electrical system - new machine equipment - PLC system: 1 piece, brand Siemens S7-1200 - Inverter system: 2 pieces, brand Siemens, to control the speeds per roller - two linear measuring transducers for gap monitoring between the rollers - Safety devices: according to standard requirements EN 1417:3.2015, CE marking Operating and maintenance instructions in English or German NEW machine with 2 year warranty in accordance with the standard requirements Available on request - two new core drilled rollers 250x500
            roll diameter 250 mm
            roll length 500 mm
            rolls drilled peripher
            Nip adjustment hydraulisch
            total power requirement 2x 5,5 kW
            Description :
            Condition: new rolling mill,
            with CE marking,
            with 2 year warranty

            Specification: Monobloc laboratory rolling mill
            250 x 500 mm - new

            - roll diameter: 250 mm
            - Roll length: 500 mm
            - Roll bore: peripherally drilled
            - Single drives: variable friction ratio
            - Roller bearing: roller bearing with manual grease
            lubrication
            - Gap adjustment: hydraulic
            - new hydraulic unit for roller nip and emergency system
            - New rotary unions make Johnson-Fluiten
            - two adjustable guide plates to adjust the working range
            on the rollers.
            - tiltable guide plates made of nylon-polyethylene Material
            - Stainless steel tank
            - New safety cage
            - 2x AC brake motors make Siemens: 5.5 kW each,
            400 V, 50 Hz
            - Painting: with RAL colours according to
            customer's request
            - New electrical control cabinet
            - 2x frequency inverters make Siemens, for variable
            speed of the rollers
            - The braking angle is monitored via the touch panel
            - new operating panel with touch panel, Siemens
            KTP700 Basic
            - new electrical system
            - new machine equipment
            - PLC system: 1 piece, brand Siemens
            S7-1200
            - Inverter system: 2 pieces, brand Siemens,
            to control the speeds per roller
            - two linear measuring transducers for gap monitoring
            between the rollers
            - Safety devices: according to standard
            requirements
            EN 1417:3.2015,
            CE marking
            Operating and
            maintenance instructions
            in English or German

            NEW machine with 2 year warranty in accordance with
            the standard requirements

            Available on request
            - two new core drilled rollers 250x500



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill Walzwerk Labor 200x400


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A220501 · Mixing mill

          Walzwerk - Labor 200x400 - - NEU -

          Technical details
          roll diameter 200 mm︱roll length 400 mm︱rolls drilled Peripher ︱Nip adjustment hydraulisch ︱total power requirement 2x 5,5 kW︱
          Condition: new rolling mill, with CE marking, with 1 year warranty Specification: Monobloc laboratory rolling mill 200 x 400 mm - new - roll diameter: 200 mm - roll length: 400 mm - roll bore: peripherally drilled - Single drives: variable friction ratio - Roller bearing: bearing with grease lubrication - Gap adjustment: hydraulic - Gap adjustment: approx. 1 - 15 mm - new hydraulic unit for roll gap and emergency system - New rotary unions make Johnson-Fluiten - two adjustable guide plates to reduce the to reduce the working area - Working range approx.: 100 to 360 mm - Stainless steel tank - New safety cage - 2x AC brake motors make Siemens: each 5,5 kW, 400 V, 50 Hz - Painting: with RAL colours according to customer's request - New electrical control cabinet - 2x frequency inverters, make Siemens, for variable speed of the rollers - The braking angle is monitored via the touch panel - new operating panel with touch panel, Siemens KTP400 Basic - new electrical system - new machine equipment - PLC system: 1 piece, Siemens brand S7-1200 - Inverter system: 2 pieces, brand Siemens, to control the speeds per roller - Two linear transducers, make Gefran, for gap monitoring between the rollers - Dimensions W/D/H approx.: 1,400 x 860 x 1,530 mm - Weight approx.: 2,500 kg - Safety devices: according to standard requirements EN 1417:3.2015, CE marking Operating and maintenance instructions in English or German NEW machine with 1 year warranty in accordance with the standard requirements
            roll diameter 200 mm
            roll length 400 mm
            rolls drilled Peripher
            Nip adjustment hydraulisch
            total power requirement 2x 5,5 kW
            Description :
            Condition: new rolling mill,
            with CE marking,
            with 1 year warranty

            Specification: Monobloc laboratory rolling mill
            200 x 400 mm - new

            - roll diameter: 200 mm
            - roll length: 400 mm
            - roll bore: peripherally drilled
            - Single drives: variable friction ratio
            - Roller bearing: bearing with grease lubrication
            - Gap adjustment: hydraulic
            - Gap adjustment: approx. 1 - 15 mm
            - new hydraulic unit for roll gap and emergency system
            - New rotary unions make Johnson-Fluiten
            - two adjustable guide plates to reduce the
            to reduce the working area
            - Working range approx.: 100 to 360 mm
            - Stainless steel tank
            - New safety cage
            - 2x AC brake motors make Siemens: each 5,5 kW,
            400 V, 50 Hz
            - Painting: with RAL colours according to
            customer's request
            - New electrical control cabinet
            - 2x frequency inverters, make Siemens, for variable
            speed of the rollers

            - The braking angle is monitored via the touch panel
            - new operating panel with touch panel, Siemens
            KTP400 Basic
            - new electrical system
            - new machine equipment
            - PLC system: 1 piece, Siemens brand
            S7-1200
            - Inverter system: 2 pieces, brand Siemens,
            to control the
            speeds per roller
            - Two linear transducers, make Gefran, for gap monitoring
            between the rollers
            - Dimensions W/D/H approx.: 1,400 x 860 x 1,530 mm
            - Weight approx.: 2,500 kg
            - Safety devices: according to standard
            requirements EN 1417:3.2015,
            CE marking Operating and
            maintenance instructions
            in English or German

            NEW machine with 1 year warranty in accordance with
            the standard requirements



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill ITALMEC Laborwalzwerk 150x300


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A191002 · Mixing mill

          ITALMEC - Laborwalzwerk 150x300 - - n.b. -

          Technical details
          roll diameter 150 mm︱roll length 300 mm︱rolls drilled Flaschenhals ︱Nip adjustment hydraulisch ︱total power requirement 4 kW︱
          condition: used, overhauled Specification: Laboratory Rolling Mill 150 x 300 mm - second-hand Motor under the rollers - Roller diameter approx.: 150 mm - roller length: 300 mm - Friction between the rollers - Rolls drilled with central chamber for water cooling - Rolls with new slewing rings, manufacturer MAIER, for water cooling, - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - Gap adjustment: NEW, hydraulic and as emergency system - Hydraulic unit NEW - NUE Tilting guide plates - NEW safety cage - Safety brake for emergency stop - AC brake motor: 4 kW - 400 Volt - 50 Hz - new mixing tanks made of stainless steel for the mixture - Safety devices according to current EN 1417:3/2015 - Painting: in RAL colours according to customer requirements - new electrical switch cabinet - Frequency converter, Siemens brand, for variable roll speed - Siemens PLC system S7-1200 - new control panel with touch panel Siemens KTP400 Basic - new machine cabling - two linear converters for gap monitoring between the rolls Overhauled, with 1 year warranty, CE mark, operating and maintenance instructions in German language
            roll diameter 150 mm
            roll length 300 mm
            rolls drilled Flaschenhals
            Nip adjustment hydraulisch
            total power requirement 4 kW
            Description :
            condition: used, overhauled

            Specification: Laboratory Rolling Mill 150 x 300 mm - second-hand
            Motor under the rollers

            - Roller diameter approx.: 150 mm
            - roller length: 300 mm
            - Friction between the rollers
            - Rolls drilled with central chamber for water cooling
            - Rolls with new slewing rings, manufacturer MAIER, for water cooling,
            - Rollers mounted on bronze bushes with circulating oil lubrication via pump,
            - Gap adjustment: NEW, hydraulic and as emergency system
            - Hydraulic unit NEW
            - NUE Tilting guide plates
            - NEW safety cage
            - Safety brake for emergency stop
            - AC brake motor: 4 kW - 400 Volt - 50 Hz
            - new mixing tanks made of stainless steel for the mixture
            - Safety devices according to current EN 1417:3/2015
            - Painting: in RAL colours according to customer requirements
            - new electrical switch cabinet
            - Frequency converter, Siemens brand, for variable roll speed
            - Siemens PLC system S7-1200
            - new control panel with touch panel Siemens KTP400 Basic
            - new machine cabling
            - two linear converters for gap monitoring between the rolls

            Overhauled, with 1 year warranty, CE mark, operating and maintenance instructions
            in German language



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill Meccaniche Moderne Monoblock 500x1500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A221001 · Mixing mill

          Meccaniche Moderne - Monoblock 500x1500 - - n.b. -

          Technical details
          roll diameter 500 mm︱roll length 1500 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 110 kW︱
          Condition: used, overhauled Specification: rolling mill 500 x 1500 mm - used - roll diameter: 500 mm - roll length: 1500 mm - monoblock - motor under the rolls - fixed friction between the rolls - Rolls: with core bore, with central chamber for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable material guide jaws made of steel - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - New safety brake for NOT STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety rods bi-directional - New electrical control cabinet with PLC system S7-1200 - New frequency converter for 110 kW, for variable speed main motor - Control panel with 7" touch panel: NEW - Machine wiring: NEW - Emergency system and restoration - Painting according to customer specification - Safety devices: according to standard 2. EN 1417:3/2015 - Electr. circuit diagrams - overhauled according to standard regulations - with 1 year warranty - EC certification and - operating and maintenance instructions CE manual (in English or German) Additional options: - Strip cutting unit - Stockblender - used, reconditioned
            roll diameter 500 mm
            roll length 1500 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 110 kW
            Description :
            Condition: used, overhauled

            Specification: rolling mill 500 x 1500 mm - used

            - roll diameter: 500 mm
            - roll length: 1500 mm
            - monoblock - motor under the rolls
            - fixed friction between the rolls
            - Rolls: with core bore,
            with central chamber for water cooling
            - Gap adjustments: NEW hydraulic
            - Hydraulic unit: NEW
            - tiltable material guide jaws made of steel
            - Rollers: mounted on bronze bushes with
            oil circulation lubrication via pump
            - new ball bearing slewing rings for connection to water circuit
            - New safety brake for NOT STOP
            - New AC motor 110 kW - 400 V - 50 Hz
            - New pan for receiving the mixture
            - Safety rods bi-directional
            - New electrical control cabinet with PLC system S7-1200
            - New frequency converter for 110 kW,
            for variable speed main motor
            - Control panel with 7" touch panel: NEW
            - Machine wiring: NEW
            - Emergency system and restoration
            - Painting according to customer specification
            - Safety devices: according to standard 2. EN 1417:3/2015
            - Electr. circuit diagrams

            - overhauled according to standard regulations
            - with 1 year warranty
            - EC certification and
            - operating and maintenance instructions CE manual
            (in English or German)

            Additional options:
            - Strip cutting unit

            - Stockblender - used, reconditioned



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill RODOLFO COMERIO 700 x 2200


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190501 · Mixing mill

          RODOLFO COMERIO - 700 x 2200 - - n.b. -

          Technical details
          roll diameter 700 mm︱roll length 2200 mm︱rolls drilled Kernbohrung ︱Nip adjustment hyraulisch 0︱total power requirement 160 kW︱
            roll diameter 700 mm
            roll length 2200 mm
            rolls drilled Kernbohrung
            Nip adjustment hyraulisch 0
            total power requirement 160 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill Comerio Ercole Monobloc 400x1000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A220201 · Mixing mill

          Comerio Ercole - Monobloc 400x1000 - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1000 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 45 kW︱
          Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls - roll diameter: 400 mm - roll length: 1000 mm - rolls: with core bore, with central chamber for water cooling - Rollers mounted on bronze bushes with oil circulation lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tiltable guide plates - stainless steel roller container to hold the mixture - bi-directional rods - safety brake for NOT stop - AC motor: 45 kW - 400 Volt - 50 Hz - Painting: in RAL colours according to customer requirements - new control panel with touch panel 7", Siemens KTP700 Basic - Display for gap between cylinders and machine speed - new electrical control cabinet with SPS system, Siemens S7-1200 - new machine wiring - New frequency converter for variable speed of the main motor - safety devices according to current EN 1417:3/2015 reconditioned, 1 year warranty, with CE mark and operating and maintenance instructions in German or English Options: - new strip cutting unit two pneumatic knives, with two-hand operation for cutting one strip
            roll diameter 400 mm
            roll length 1000 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 45 kW
            Description :
            Condition: used, overhauled

            Specification: Rolling mill 400 x 1000 mm - second-hand
            monobloc model, motor under the rolls

            - roll diameter: 400 mm
            - roll length: 1000 mm
            - rolls: with core bore, with central chamber for
            water cooling
            - Rollers mounted on bronze bushes with oil circulation lubrication
            via pump,
            - equipped with new slewing rings for connection to the
            water circuit
            - Gap adjustment: hydraulic, NEW
            - Hydraulic unit NEW
            - Tiltable guide plates
            - stainless steel roller container to hold the mixture
            - bi-directional rods
            - safety brake for NOT stop
            - AC motor: 45 kW - 400 Volt - 50 Hz
            - Painting: in RAL colours according to customer
            requirements
            - new control panel with touch panel 7", Siemens KTP700 Basic
            - Display for gap between cylinders and machine speed
            - new electrical control cabinet with SPS system, Siemens S7-1200
            - new machine wiring
            - New frequency converter for variable speed of the main motor
            - safety devices according to current EN 1417:3/2015

            reconditioned, 1 year warranty, with CE mark and operating and maintenance instructions
            in German or English

            Options: - new strip cutting unit
            two pneumatic knives, with two-hand operation
            for cutting one strip




        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill ITAL 400 x 1100 Duplocom/pluridrive


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A191004 · Mixing mill

          ITAL - 400 x 1100 Duplocom/pluridrive - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1100 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch ︱total power requirement 2x 30 kW︱
            roll diameter 400 mm
            roll length 1100 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch
            total power requirement 2x 30 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill ITAL Monoblock 550x1500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A170501 · Mixing mill

          ITAL - Monoblock 550x1500 - - n.b. -

          Technical details
          roll diameter 550 mm︱roll length 1500 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 90 kW︱
            roll diameter 550 mm
            roll length 1500 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 90 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill Meccaniche Moderne Monobloc 400x1000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A170304 · Mixing mill

          Meccaniche Moderne - Monobloc 400x1000 - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1000 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 37 kW︱
            roll diameter 400 mm
            roll length 1000 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 37 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill Meccaniche Moderne Monoblock 600x1800


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190402 · Mixing mill

          Meccaniche Moderne - Monoblock 600x1800 - - n.b. -

          Technical details
          roll diameter 600 mm︱roll length 1800 mm︱rolls drilled Flaschenhals ︱Nip adjustment hydraulisch 0︱total power requirement 132 kW︱
            roll diameter 600 mm
            roll length 1800 mm
            rolls drilled Flaschenhals
            Nip adjustment hydraulisch 0
            total power requirement 132 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill ITAL 400 x 1000 Duplocom


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A191001 · Mixing mill

          ITAL - 400 x 1000 Duplocom - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1000 mm︱rolls drilled peripher ︱Nip adjustment hydraulisch ︱total power requirement 2x 30 kW︱
            roll diameter 400 mm
            roll length 1000 mm
            rolls drilled peripher
            Nip adjustment hydraulisch
            total power requirement 2x 30 kW


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill ITAL Duplocom /Pluridrive 550x1500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A180601 · Mixing mill

          ITAL - Duplocom /Pluridrive 550x1500 - - n.b. -

          Technical details
          roll diameter 550 mm︱roll length 1500 mm︱rolls drilled Kernbohrung ︱Nip adjustment Hydraulisch ︱total power requirement 150 kW︱
          Condition used, refurbished, Specification Roll mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - Variable friction ratio between rolls - cored rolls with central chamber for water cooling - nip adjustment: NEW hydraulical - hydraulic unit: NEW - tipper guiding plates - cylinders: mounted on bronze bushings with forced oil lubrication by pump, new rotary joints for connections to water circuit - N.2 safety brake for emergency stop - N.2 AC engine 75 kW – 380 V – 50 Hz - mill tray to contain compound - bi-directional bars for safety system - visualization display to monitor gap between rolls and engine speed - electric cabinet: with PLC system NEW - N.2 inverter system for variable speed of each roll - N.1 control panel: NEW - electric machine-on-board system NEW - emergency system and relative restore - painting acc. to customer’s specification - safety devices acc. to standard rules second EN 1417:3/2015 - electric diagrams • reconditioned acc. to standard rules • incl. 1 year warranty • EC certification and • user and maintenance manual (in Englisch or German) additional option against extra charge Stockblender – reconditioned • mounted on the machine to homogenize rubber compounds New rotating knives • placed under the mill tray to cut rubber compound
            roll diameter 550 mm
            roll length 1500 mm
            rolls drilled Kernbohrung
            Nip adjustment Hydraulisch
            total power requirement 150 kW
            Description :
            Condition used, refurbished,

            Specification Roll mill 550 x 1500 mm - used

            - roll diameter: 550 mm
            - roll length: 1500 mm
            - Variable friction ratio between rolls
            - cored rolls with central chamber for water cooling
            - nip adjustment: NEW hydraulical
            - hydraulic unit: NEW
            - tipper guiding plates
            - cylinders: mounted on bronze bushings with forced
            oil lubrication by pump,
            new rotary joints for connections to water circuit
            - N.2 safety brake for emergency stop
            - N.2 AC engine 75 kW – 380 V – 50 Hz
            - mill tray to contain compound
            - bi-directional bars for safety system
            - visualization display to monitor gap between rolls and engine speed
            - electric cabinet: with PLC system NEW
            - N.2 inverter system for variable speed of each roll
            - N.1 control panel: NEW
            - electric machine-on-board system NEW
            - emergency system and relative restore
            - painting acc. to customer’s specification
            - safety devices acc. to standard rules second EN 1417:3/2015
            - electric diagrams

            • reconditioned acc. to standard rules
            • incl. 1 year warranty
            • EC certification and
            • user and maintenance manual (in Englisch or German)

            additional option against extra charge

            Stockblender – reconditioned
            • mounted on the machine to homogenize rubber compounds

            New rotating knives
            • placed under the mill tray
            to cut rubber compound


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill Comerio Ercole Monoblock 550x1500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A221002 · Mixing mill

          Comerio Ercole - Monoblock 550x1500 - - n.b. -

          Technical details
          roll diameter 550 mm︱roll length 1500 mm︱rolls drilled peripher ︱Nip adjustment hydraulisch 0︱total power requirement 110 kW︱
          Condition: used, overhauled Specification: rolling mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - monoblock - motor under the rolls - Fixed friction between the rolls - Rolls: peripherally drilled, for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable steel material guide jaws - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - Safety brake for EMERGENCY STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety bars bi-directional - New electrical control cabinet with PLC system S7-1200 - New frequency converter for 110 kW, for variable speed of the main motor - Control panel: NEW - Machine wiring: NEW - Painting according to customer specification - Safety devices: according to standard 2. EN 1417:3/2015 - Electr. wiring diagrams - overhauled according to standard regulations - with 1 year warranty - EC certification and - operating and maintenance instructions CE manual (in English or German) Additional options: - Strip cutting unit - Stockblender - used, reconditioned
            roll diameter 550 mm
            roll length 1500 mm
            rolls drilled peripher
            Nip adjustment hydraulisch 0
            total power requirement 110 kW
            Description :
            Condition: used, overhauled

            Specification: rolling mill 550 x 1500 mm - used

            - roll diameter: 550 mm
            - roll length: 1500 mm
            - monoblock - motor under the rolls
            - Fixed friction between the rolls
            - Rolls: peripherally drilled, for water cooling
            - Gap adjustments: NEW hydraulic
            - Hydraulic unit: NEW
            - tiltable steel material guide jaws
            - Rollers: mounted on bronze bushes with
            oil circulation lubrication via pump
            - new ball bearing slewing rings for connection to water circuit
            - Safety brake for EMERGENCY STOP
            - New AC motor 110 kW - 400 V - 50 Hz
            - New pan for receiving the mixture
            - Safety bars bi-directional
            - New electrical control cabinet with PLC system S7-1200
            - New frequency converter for 110 kW,
            for variable speed of the main motor
            - Control panel: NEW
            - Machine wiring: NEW
            - Painting according to customer specification
            - Safety devices: according to standard 2. EN 1417:3/2015
            - Electr. wiring diagrams

            - overhauled according to standard regulations
            - with 1 year warranty
            - EC certification and
            - operating and maintenance instructions CE manual
            (in English or German)

            Additional options:
            - Strip cutting unit
            - Stockblender - used, reconditioned



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill COMERIO ERCOLE Monobloc 400x1000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190701 · Mixing mill

          COMERIO ERCOLE - Monobloc 400x1000 - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1000 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 37 kW︱
          Condition: used, reconditioned Specification: Roll mill 400 x 1000 mm - used Monobloc model - motor placer under cylinders - roll diameter 400 mm - roll length 1000 mm - Cored rolls with central chamber for water cooling - Cylinders mounted on bronze bushings with forced oil lubrication by pump - Cylinders equipped to new rotary joints for connection to water circuit - New hydraulic nip adjustments - New hydraulic unit - Tilting guide jaws - Mill tray to contain the compound - Bi-directional bars - Safety brake for emergency stop - AC Engine: about 37 kW - 380 Volt - 50 Hz - Painting with color RAL according to customers’ specification - New command panel - Visualization display for monitoring gap between cylinders and engine speed - New electric cabinet with PLC system - New on-board machine system; - Safety guards according to current standards in compliance with EN 1417:3/2015 - Reconditioned and guaranteed machine with CE marking and manual of use and maintenance in English or German language Location: Italy Options: New inverter system Chroming of two cylinders Renovated stock blender, mounted on the machine with control system and new on-board machine system New rotating knives, placed under the mill tray to cut rubber compound.
            roll diameter 400 mm
            roll length 1000 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 37 kW
            Description :
            Condition: used, reconditioned

            Specification: Roll mill 400 x 1000 mm - used
            Monobloc model - motor placer under cylinders

            - roll diameter 400 mm
            - roll length 1000 mm
            - Cored rolls with central chamber for water cooling
            - Cylinders mounted on bronze bushings with forced oil lubrication by pump
            - Cylinders equipped to new rotary joints for connection to water circuit
            - New hydraulic nip adjustments
            - New hydraulic unit
            - Tilting guide jaws
            - Mill tray to contain the compound
            - Bi-directional bars
            - Safety brake for emergency stop
            - AC Engine: about 37 kW - 380 Volt - 50 Hz
            - Painting with color RAL according to customers’ specification
            - New command panel
            - Visualization display for monitoring gap between cylinders and engine speed
            - New electric cabinet with PLC system
            - New on-board machine system;
            - Safety guards according to current standards in compliance with EN 1417:3/2015

            - Reconditioned and guaranteed machine with CE marking and manual
            of use and maintenance in English or German language

            Location: Italy

            Options: New inverter system

            Chroming of two cylinders

            Renovated stock blender, mounted on the machine
            with control system and new on-board machine system

            New rotating knives, placed under the mill tray to
            cut rubber compound.




        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill Italmec Monobloc 400x1000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A221101 · Mixing mill

          Italmec - Monobloc 400x1000 - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1000 mm︱rolls drilled Kernbohrung ︱Nip adjustment motorisch 0︱
          Condition: used, Specification: Rolling mill 400 x 1000 mm - used monobloc model, motor under the rolls - roll diameter: 400 mm - roll length: 1000 mm - Rolls: with core bore, with central chamber for water cooling - Gearbox: 2-axis reduction - fixed friction - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with slewing rings for connection connection to the water circuit - Gap adjustment: motorised - Roller container for holding mixture - bi-directional bars - safety brake for EMERGENCY stop - reverse operation after emergency stop - AC motor: 37 kW - 380 Volt - 50 Hz - paint: green RAL colour - new control panel - new electrical control cabinet - new machine wiring - fixed speed, no frequency converter - Safety devices not according to current EN 1417:2015
            roll diameter 400 mm
            roll length 1000 mm
            rolls drilled Kernbohrung
            Nip adjustment motorisch 0
            Description :
            Condition: used,

            Specification: Rolling mill 400 x 1000 mm - used
            monobloc model, motor under the rolls

            - roll diameter: 400 mm
            - roll length: 1000 mm
            - Rolls: with core bore, with
            central chamber for water cooling
            - Gearbox: 2-axis reduction
            - fixed friction
            - Rollers mounted on bronze bushes with circulating oil
            lubrication via pump,
            - equipped with slewing rings for connection
            connection to the water circuit
            - Gap adjustment: motorised
            - Roller container for holding mixture
            - bi-directional bars
            - safety brake for EMERGENCY stop
            - reverse operation after emergency stop
            - AC motor: 37 kW - 380 Volt - 50 Hz
            - paint: green RAL colour
            - new control panel
            - new electrical control cabinet
            - new machine wiring
            - fixed speed, no frequency converter
            - Safety devices not according to
            current EN 1417:2015



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill COMERIO ERCOLE Monoblock 600x1800


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190401 · Mixing mill

          COMERIO ERCOLE - Monoblock 600x1800 - - n.b. -

          Technical details
          roll diameter 600 mm︱roll length 1800 mm︱rolls drilled Flaschenhals ︱Nip adjustment hydraulisch 0︱total power requirement 132 kW︱
          Condition: used, completely overhauled; with warranty Specification: Rolling mill 600 x 1800 mm - second-hand Monoblock model - motor under the rollers - Roll diameter: 600 mm - Roll length: 1800 mm - Roll core with central chamber for water cooling - Friction between the rollers - hydraulic gap adjustment: new - Hydraulic unit: new - Tilting guide plates made of steel - Rollers on bronze bearing bushes with recirculating oil lubrication via pump - Rollers with new ball slewing rings, make Maier, for connection to the water circuit - AC main motor: 132 kW - 400 V - 50 Hz - Safety brake for EMERGENCY STOP - Stainless steel roller container to hold the mixture - bi-directional safety bars - Visual indication of the gap between rolls and engine speed - electric switch cabinet new with SPS, Siemens S7-1200 - New control panel with touch panel for machine parameters - Machine wiring: new - Power cable approx. 5m from switch cabinet to machine - Emergency system and memory: - Painting according to customer requirements - Safety devices according to current standard EN 1417:3/2015 - EC certificate and operating and maintenance instructions (CE manual in English or German) - electrical schematic - with 12 months warranty additionally against surcharge: - Inverter system for motor control 132 KW, make Siemens, for controllable Roller speed - Stockblender - overhauled mounted on the machine for homogenization of rubber mixtures - two new, adjustable pneumatic strip cutting knives for one rubber strip
            roll diameter 600 mm
            roll length 1800 mm
            rolls drilled Flaschenhals
            Nip adjustment hydraulisch 0
            total power requirement 132 kW
            Description :
            Condition: used, completely overhauled;
            with warranty

            Specification: Rolling mill 600 x 1800 mm - second-hand
            Monoblock model - motor under the rollers

            - Roll diameter: 600 mm
            - Roll length: 1800 mm
            - Roll core with central chamber for water cooling
            - Friction between the rollers
            - hydraulic gap adjustment: new
            - Hydraulic unit: new
            - Tilting guide plates made of steel
            - Rollers on bronze bearing bushes with recirculating oil lubrication via pump
            - Rollers with new ball slewing rings, make Maier, for connection
            to the water circuit
            - AC main motor: 132 kW - 400 V - 50 Hz

            - Safety brake for EMERGENCY STOP
            - Stainless steel roller container to hold the mixture
            - bi-directional safety bars
            - Visual indication of the gap between rolls
            and engine speed
            - electric switch cabinet new with SPS, Siemens S7-1200
            - New control panel with touch panel for machine parameters
            - Machine wiring: new
            - Power cable approx. 5m from switch cabinet to machine
            - Emergency system and memory:
            - Painting according to customer requirements
            - Safety devices according to current standard EN 1417:3/2015
            - EC certificate and operating and maintenance instructions
            (CE manual in English or German)
            - electrical schematic
            - with 12 months warranty

            additionally against surcharge:

            - Inverter system for motor control 132 KW, make Siemens, for controllable
            Roller speed

            - Stockblender - overhauled
            mounted on the machine for homogenization of rubber mixtures

            - two new, adjustable pneumatic strip cutting knives for one
            rubber strip



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill Comerio Ercole 350x700


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A240201 · Mixing mill

          Comerio Ercole - 350x700 - - n.b. -

          Technical details
          roll diameter 350 mm︱roll length 700 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 22 kW︱
          Condition: used, overhauled Specification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers - roller diameter: 350 mm - roller length: 700 mm - Rollers: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tilting guide plates made of steel - New roller container, made of stainless steel, for holding mixture - bi-directional bars - Safety brake for NOT stop - AC motor: 22 KW - 400 Volt - 50 Hz - New frequency converter system for variable roller speed - Painting: in RAL colours according to customer requirements - New control panel with touch panel Siemens KTP700 Basic - Display for gap between the cylinders and machine speed - New electrical control cabinet with PLC system, Siemens S7-1200 - Device for remote maintenance of the system - New machine cabling - Safety devices in accordance with current EN 1417:3/2015 overhauled, 1 year warranty, with CE labelling and operating and maintenance and maintenance instructions in German or English
            roll diameter 350 mm
            roll length 700 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 22 kW
            Description :
            Condition: used, overhauled

            Specification: Rolling mill 350 x 700 mm - second-hand
            model with motor on the side of the rollers

            - roller diameter: 350 mm
            - roller length: 700 mm
            - Rollers: with core bore, with central chamber for
            water cooling
            - Fixed friction between the rollers
            - Rollers mounted on bronze bushes with circulating oil lubrication
            via pump,
            - equipped with new slewing rings for connection to the water circuit
            - Gap adjustment: hydraulic, NEW
            - Hydraulic unit NEW
            - Tilting guide plates made of steel
            - New roller container, made of stainless steel, for holding mixture
            - bi-directional bars
            - Safety brake for NOT stop
            - AC motor: 22 KW - 400 Volt - 50 Hz
            - New frequency converter system for variable roller speed
            - Painting: in RAL colours according to
            customer requirements
            - New control panel with touch panel Siemens KTP700 Basic
            - Display for gap between the cylinders and machine speed
            - New electrical control cabinet with PLC system, Siemens S7-1200
            - Device for remote maintenance of the system
            - New machine cabling
            - Safety devices in accordance with current EN 1417:3/2015

            overhauled, 1 year warranty, with CE labelling and operating and maintenance
            and maintenance instructions in German or English



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill ITALMEC Monobloc 400x1000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A210901 · Mixing mill

          ITALMEC - Monobloc 400x1000 - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1000 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 45 kW︱
          Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls - roll diameter: 400 mm - roll length: 1000 mm - rolls: with core bore, with central chamber for water cooling - Rollers mounted on bronze bushes with oil circulation lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tiltable guide plates - stainless steel roller container to hold the mixture - bi-directional rods - safety brake for NOT stop - AC motor: 45 kW - 400 Volt - 50 Hz - Painting: in RAL colours according to customer requirements - new control panel with touch panel 7", Siemens KTP700 Basic - Display for gap between cylinders and machine speed - new electrical control cabinet with SPS system, Siemens S7-1200 - new machine wiring - New frequency converter for variable speed of the main motor - safety devices according to current EN 1417:3/2015 reconditioned, 1 year warranty, with CE mark and operating and maintenance instructions in German or English Options: - new strip cutting unit two pneumatic knives, with two-hand operation for cutting one strip
            roll diameter 400 mm
            roll length 1000 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 45 kW
            Description :
            Condition: used, overhauled

            Specification: Rolling mill 400 x 1000 mm - second-hand
            monobloc model, motor under the rolls

            - roll diameter: 400 mm
            - roll length: 1000 mm
            - rolls: with core bore, with central chamber for
            water cooling
            - Rollers mounted on bronze bushes with oil circulation lubrication
            via pump,
            - equipped with new slewing rings for connection to the
            water circuit
            - Gap adjustment: hydraulic, NEW
            - Hydraulic unit NEW
            - Tiltable guide plates
            - stainless steel roller container to hold the mixture
            - bi-directional rods
            - safety brake for NOT stop
            - AC motor: 45 kW - 400 Volt - 50 Hz
            - Painting: in RAL colours according to customer
            requirements
            - new control panel with touch panel 7", Siemens KTP700 Basic
            - Display for gap between cylinders and machine speed
            - new electrical control cabinet with SPS system, Siemens S7-1200
            - new machine wiring
            - New frequency converter for variable speed of the main motor
            - safety devices according to current EN 1417:3/2015

            reconditioned, 1 year warranty, with CE mark and operating and maintenance instructions
            in German or English

            Options: - new strip cutting unit
            two pneumatic knives, with two-hand operation
            for cutting one strip




        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Mixing Mixing mill COMERIO ERCOLE Duplocom/pluridrive 560 x 1500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A210702 · Mixing mill

          COMERIO ERCOLE - Duplocom/pluridrive 560 x 1500 - - 1995 -

          Technical details
          roll diameter 560 mm︱roll length 1500 mm︱rolls drilled Peripher ︱Nip adjustment hyraulisch 0︱total power requirement 150 kW︱
          Condition: used, completely overhauled; with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency converters for variable speed per roller - Two safety brakes for emergency stop - Roller container made of stainless steel to hold the mixture - bi-directional safety bars - Visual display of the gap between the rollers and motor speed - New electrical control cabinet with PLC, Siemens S7-1200 - New control panel with touch panel 7" for machine parameters - Machine wiring: new - Paintwork according to customer requirements - Safety devices according to current standard EN 1417:3/2015 - EC certificate and operating and maintenance manual (CE manual in English or German) - Electrical wiring diagram and hydraulic diagrams in English or German - with 12 months warranty additionally against surcharge: - overhauled stockblender mounted on the machine to homogenise the rubber compounds - two new, adjustable pneumatic strip separating knives for one rubber strip
            roll diameter 560 mm
            roll length 1500 mm
            rolls drilled Peripher
            Nip adjustment hyraulisch 0
            total power requirement 150 kW
            Description :
            Condition: used, completely overhauled;
            with warranty

            Specification: rolling mill 560 x 1500 mm - used
            model external gearbox - motor sideways
            placed at the machine

            - roll diameter: 560 mm
            - roll length: 1500 mm
            - model: Duplocom / pluridrive
            - Peripherally drilled rollers for water cooling
            - Cardan joints between gearbox and rollers
            - Individual drive for the rollers, for variable friction
            - hydr. gap adjustment
            - Hydraulic unit
            - Tilting steel guide plates
            - rollers mounted on roller bearings with appropriate lubrication
            - rollers with new ball bearing slewing rings, make Maier, for the connection
            to the water circuit
            - One gearbox
            - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz
            - two new frequency converters for variable speed per roller
            - Two safety brakes for emergency stop

            - Roller container made of stainless steel to hold the mixture
            - bi-directional safety bars
            - Visual display of the gap between the rollers
            and motor speed
            - New electrical control cabinet with PLC, Siemens S7-1200
            - New control panel with touch panel 7" for machine parameters
            - Machine wiring: new
            - Paintwork according to customer requirements
            - Safety devices according to current standard EN 1417:3/2015
            - EC certificate and operating and maintenance manual
            (CE manual in English or German)
            - Electrical wiring diagram and hydraulic diagrams in
            English or German
            - with 12 months warranty

            additionally against surcharge:

            - overhauled stockblender
            mounted on the machine to homogenise the rubber compounds

            - two new, adjustable pneumatic strip separating knives for one

            rubber strip


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •