,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Metal Processing

          Machinelist: Metal Processing


          Center Lathe

          used Metal Processing Center Lathe VDF-BOEHRINGER V 6


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23056 · Center Lathe

          VDF-BOEHRINGER - V 6 - - -

          Technical details
          turning diameter over bed 900 mm︱turning diameter over slide rest 600 mm︱turning length 3000 mm︱spindle turning speed range 11,2 - 560 U/min︱tool holder Multifix D1 ︱total power requirement 22 kW︱weight of the machine ca. 5,6 t︱dimensions of the machine ca. 5,6 x 1,8 x 1,7 m︱
          Safety-related conversion according to CE standard 2017 2011 new facing spindle, lock case partially renewed, lubrication after internal plan
            turning diameter over bed 900 mm
            turning diameter over slide rest 600 mm
            turning length 3000 mm
            spindle turning speed range 11,2 - 560 U/min
            tool holder Multifix D1
            total power requirement 22 kW
            weight of the machine ca. 5,6 t
            dimensions of the machine ca. 5,6 x 1,8 x 1,7 m
            Description :
            Safety-related conversion according to CE standard 2017
            2011 new facing spindle, lock case partially renewed, lubrication after
            internal plan
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe WEILER LZ 220


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24010 · Center Lathe

          WEILER - LZ 220 - - -

          Technical details
          turning diameter over bed 340 mm︱turning diameter over slide rest 280 mm︱turning length 800 mm︱centre height 170 mm︱total power requirement kW︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. 1,8 x 0,9 x 1,4 m︱
          Machine only runs in 1 direction, hence special price Good condition, accessories as seen on photos.
            turning diameter over bed 340 mm
            turning diameter over slide rest 280 mm
            turning length 800 mm
            centre height 170 mm
            weight of the machine ca. 1,6 t
            dimensions of the machine ca. 1,8 x 0,9 x 1,4 m
            Description :
            Machine only runs in 1 direction, hence special price
            Good condition, accessories as seen on photos.
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe ERNAULT-SOMUA HN 350


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23044 · Center Lathe

          ERNAULT-SOMUA - HN 350 - - -

          Technical details
          turning diameter over bed 380 mm︱turning diameter over slide rest 250 mm︱turning length 600 mm︱turning speeds 90 - 1600 U/min︱centre height 200 mm︱total power requirement 4,2 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,2 x 0,9 x 1,6 m︱
          Heidenhain digital readout.
            turning diameter over bed 380 mm
            turning diameter over slide rest 250 mm
            turning length 600 mm
            turning speeds 90 - 1600 U/min
            centre height 200 mm
            total power requirement 4,2 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,2 x 0,9 x 1,6 m
            Description :
            Heidenhain digital readout.
          1.800 €
          Datasheet
          Request / Contact

          CNC Lathe

          used Metal Processing CNC Lathe INDEX G300


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23064 · CNC Lathe

          INDEX - G300 - - 1996 - Siemens 840 C

          Technical details
          turning diameter 270 mm︱turning length 710 mm︱control Siemens 840 C ︱spindle passage 65 mm︱total power requirement kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,8 x 2,6 x 2,9 m︱
            turning diameter 270 mm
            turning length 710 mm
            control Siemens 840 C
            spindle passage 65 mm
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,8 x 2,6 x 2,9 m
            Description :

          Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used Metal Processing CNC Lathe - Inclined Bed Type GILDEMEISTER Twin 42


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23055 · CNC Lathe - Inclined Bed Type

          GILDEMEISTER - Twin 42 - - 2001 - Sinumerik 840

          Technical details
          turning diameter 120 mm︱turning length 650 mm︱control Sinumerik 840 ︱swing diameter 250 mm︱spindle passage 42 mm︱spindle turning speed - stepless 35 - 7000 U/min︱number of tools 2 x 12 ︱total power requirement kW︱weight of the machine ca. 10,4 t︱dimensions of the machine ca. m︱
          bar feeder, chucks, chip conveyor, oil dust exhauster.
            turning diameter 120 mm
            turning length 650 mm
            control Sinumerik 840
            swing diameter 250 mm
            spindle passage 42 mm
            spindle turning speed - stepless 35 - 7000 U/min
            number of tools 2 x 12
            weight of the machine ca. 10,4 t
            Description :
            bar feeder, chucks, chip conveyor, oil dust exhauster.
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used Metal Processing Bench Drilling Machine IXION BT 13


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24056 · Bench Drilling Machine

          IXION - BT 13 - - -

          Technical details
          bore capacity in steel (diameter) 15 mm︱throat 185 mm︱bore stroke 70 mm︱stroke of the table 290 mm︱turning speeds 500 - 5600 U/min︱table surface area 220 x 220 mm︱total power requirement kW︱weight of the machine ca. 0,1 t︱dimensions of the machine ca. 0,6 x 0,3 x 0,8 m︱
            bore capacity in steel (diameter. 15 mm
            throat 185 mm
            bore stroke 70 mm
            stroke of the table 290 mm
            turning speeds 500 - 5600 U/min
            table surface area 220 x 220 mm
            weight of the machine ca. 0,1 t
            dimensions of the machine ca. 0,6 x 0,3 x 0,8 m
          Datasheet
          Request / Contact
          used Metal Processing Bench Drilling Machine IXION Unb


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24050 · Bench Drilling Machine

          IXION - Unb - - -

          Technical details
          bore capacity in steel (diameter) 15 mm︱throat 150 mm︱bore stroke 60 mm︱stroke of the table 170 mm︱table surface area 180 x 150 mm︱total power requirement kW︱weight of the machine ca. 0,1 t︱dimensions of the machine ca. 0,5 x 0,3 x 0,6 m︱
            bore capacity in steel (diameter. 15 mm
            throat 150 mm
            bore stroke 60 mm
            stroke of the table 170 mm
            table surface area 180 x 150 mm
            weight of the machine ca. 0,1 t
            dimensions of the machine ca. 0,5 x 0,3 x 0,6 m
          Datasheet
          Request / Contact
          used Metal Processing Bench Drilling Machine IXION BT 13


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24049 · Bench Drilling Machine

          IXION - BT 13 - - -

          Technical details
          bore capacity in steel (diameter) 15 mm︱throat 185 mm︱bore stroke 70 mm︱turning speeds 480 - 3800 U/min︱stroke of the table 290 mm︱table surface area 220 x 220 mm︱total power requirement kW︱weight of the machine ca. 0,1 t︱dimensions of the machine ca. 0,6 x 0,3 x 0,8 m︱
            bore capacity in steel (diameter. 15 mm
            throat 185 mm
            bore stroke 70 mm
            turning speeds 480 - 3800 U/min
            stroke of the table 290 mm
            table surface area 220 x 220 mm
            weight of the machine ca. 0,1 t
            dimensions of the machine ca. 0,6 x 0,3 x 0,8 m
          Datasheet
          Request / Contact
          used Metal Processing Bench Drilling Machine WOERNER B13S


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24054 · Bench Drilling Machine

          WOERNER - B13S - - -

          Technical details
          bore capacity in steel (diameter) 13 mm︱throat 270 mm︱bore stroke 120 mm︱quill stroke 220 mm︱turning speeds 270 - 3500 U/min︱table surface area 430 x 330 mm︱total power requirement 0,3 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 0,6 x 0,5 x 1,0 m︱
            bore capacity in steel (diameter. 13 mm
            throat 270 mm
            bore stroke 120 mm
            quill stroke 220 mm
            turning speeds 270 - 3500 U/min
            table surface area 430 x 330 mm
            total power requirement 0,3 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 0,6 x 0,5 x 1,0 m
          Datasheet
          Request / Contact
          used Metal Processing Bench Drilling Machine FLOTT B 10/I


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24055 · Bench Drilling Machine

          FLOTT - B 10/I - - -

          Technical details
          bore capacity in steel (diameter) 15 mm︱throat 200 mm︱bore stroke 65 mm︱turning speeds 410 - 1700 U/min︱stroke of the table 200 mm︱table surface area 220 x 220 mm︱total power requirement kW︱weight of the machine ca. 0,1 t︱dimensions of the machine ca. 0,7 x 0,4 x 0,9 m︱
            bore capacity in steel (diameter. 15 mm
            throat 200 mm
            bore stroke 65 mm
            turning speeds 410 - 1700 U/min
            stroke of the table 200 mm
            table surface area 220 x 220 mm
            weight of the machine ca. 0,1 t
            dimensions of the machine ca. 0,7 x 0,4 x 0,9 m
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used Metal Processing Drilling and Milling M/C HURTH V 11


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23073 · Drilling and Milling M/C

          HURTH - V 11 - - -

          Technical details
          bore capacity in steel (diameter) 50 mm︱x-travel 400 mm︱y-travel 260 mm︱spindle taper ISO 40 ︱vertical movement of the milling spindle 120 mm︱milling slide travel 150 mm︱clamping table 1220 x 355 mm︱z-travel 670 mm︱turning speeds 45 - 2500 U/min︱total power requirement kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 2,0 x 1,8 x 2,1 m︱
            bore capacity in steel (diameter. 50 mm
            x-travel 400 mm
            y-travel 260 mm
            spindle taper ISO 40
            vertical movement of the milling. 120 mm
            milling slide travel 150 mm
            clamping table 1220 x 355 mm
            z-travel 670 mm
            turning speeds 45 - 2500 U/min
            weight of the machine ca. 2,8 t
            dimensions of the machine ca. 2,0 x 1,8 x 2,1 m
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used Metal Processing Machining Center - Horizontal MORI SEIKI NH 5000-40


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23009 · Machining Center - Horizontal

          MORI SEIKI - NH 5000-40 - - 2005 - MSX 501

          Technical details
          x-travel 630 mm︱y-travel 600 mm︱z-travel 670 mm︱Control MSX 501 ︱spindle turning speed - stepless 14000 U/min︱tool taper BT 40 ︱pallet chang. with pallet turn. 360x1 degree 2 ︱max. workpiece weight 500 kg︱tool change unit 60 fach ︱table-size 500 x 500 mm︱total power requirement 56 kW︱weight of the machine ca. 11,8 t︱dimensions of the machine ca. 5,8 x 3,6 x 3,0 m︱
            x-travel 630 mm
            y-travel 600 mm
            z-travel 670 mm
            Control MSX 501
            spindle turning speed - stepless 14000 U/min
            tool taper BT 40
            pallet chang. with pallet turn. . 2
            max. workpiece weight 500 kg
            tool change unit 60 fach
            table-size 500 x 500 mm
            total power requirement 56 kW
            weight of the machine ca. 11,8 t
            dimensions of the machine ca. 5,8 x 3,6 x 3,0 m
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used Metal Processing Pillar Drilling Machine GILLARDON GK 30 VE


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22079 · Pillar Drilling Machine

          GILLARDON - GK 30 VE - - 1989 -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 300 mm︱bore stroke 150 mm︱cross-moving table 600 x 180 ︱total power requirement 1,5 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,0 x 1,0 x 2,2 m︱
            bore capacity in steel (diameter. 30 mm
            throat 300 mm
            bore stroke 150 mm
            cross-moving table 600 x 180
            total power requirement 1,5 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,0 x 1,0 x 2,2 m
          Datasheet
          Request / Contact

          Upright Drilling Machine

          used Metal Processing Upright Drilling Machine ALZMETALL AB 35 S


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24042 · Upright Drilling Machine

          ALZMETALL - AB 35 S - - -

          Technical details
          bore capacity in steel (diameter) 45 mm︱throat 300 mm︱bore stroke 160 mm︱taper MK 4 ︱table surface area 600 x 500 mm︱table adjustable 550 mm︱total power requirement 0,8 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 0,8 x 0,6 x 1,8 m︱
            bore capacity in steel (diameter. 45 mm
            throat 300 mm
            bore stroke 160 mm
            taper MK 4
            table surface area 600 x 500 mm
            table adjustable 550 mm
            total power requirement 0,8 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 0,8 x 0,6 x 1,8 m
          Datasheet
          Request / Contact
          used Metal Processing Upright Drilling Machine ALZMETALL AB 4 SV


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24006 · Upright Drilling Machine

          ALZMETALL - AB 4 SV - - -

          Technical details
          bore capacity in steel (diameter) 35 / 45 mm︱throat 345 mm︱bore stroke 200 mm︱morse taper MK 4 ︱table diameter 700 x 600 mm︱spindle turning speed - stepless 80 - 720 U/min︱table adjustment - upper 600 mm︱taper MK 4 ︱total power requirement 2,5 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 1,0 x 0,7 x 2,0 m︱
          automatic feed.
            bore capacity in steel (diameter. 35 / 45 mm
            throat 345 mm
            bore stroke 200 mm
            morse taper MK 4
            table diameter 700 x 600 mm
            spindle turning speed - stepless 80 - 720 U/min
            table adjustment - upper 600 mm
            taper MK 4
            total power requirement 2,5 kW
            weight of the machine ca. 0,6 t
            dimensions of the machine ca. 1,0 x 0,7 x 2,0 m
            Description :
            automatic feed.
          Datasheet
          Request / Contact
          used Metal Processing Upright Drilling Machine GILLARDON GB 20


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24005 · Upright Drilling Machine

          GILLARDON - GB 20 - - -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 285 mm︱bore stroke 150 mm︱spindle turning speed - stepless 150 - 3000 U/min︱taper MK 2 ︱table surface area 400 x 400 mm︱stroke of the table 650 mm︱total power requirement 1,2 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 0,6 x 0,4 x 2,0 m︱
            bore capacity in steel (diameter. 25 mm
            throat 285 mm
            bore stroke 150 mm
            spindle turning speed - stepless 150 - 3000 U/min
            taper MK 2
            table surface area 400 x 400 mm
            stroke of the table 650 mm
            total power requirement 1,2 kW
            weight of the machine ca. 0,3 t
            dimensions of the machine ca. 0,6 x 0,4 x 2,0 m
          Datasheet
          Request / Contact

          Double Spindle Milling Machine

          used Metal Processing Double Spindle Milling Machine HK CON L2 SDZ 8


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-K001 · Double Spindle Milling Machine

          HK CON - L2 SDZ 8 - - 2014 - Siemens

          Technical details
          control Siemens ︱total power requirement 110 kW︱weight of the machine ca. 14 t︱x-travel 1800 mm︱y-travel mm︱z-travel 190 mm︱diameter - cutter standard max. 29,51 mm︱length max. 600 mm︱turning length 125 mm︱spindle taper HS 32 ︱spindle turning speed - stepless max. 7000 U/min︱dimensions of the machine ca. 9,0 x 7,0 x 3,5 m︱z-travel mm︱
            control Siemens
            total power requirement 110 kW
            weight of the machine ca. 14 t
            x-travel 1800 mm
            z-travel 190 mm
            diameter - cutter standard max. 29,51 mm
            length max. 600 mm
            turning length 125 mm
            spindle taper HS 32
            spindle turning speed - stepless max. 7000 U/min
            dimensions of the machine ca. 9,0 x 7,0 x 3,5 m
          65.000 €
          Datasheet
          Request / Contact

          Knee-and-Column Milling Machine

          used Metal Processing Knee-and-Column Milling Machine OERLIKON M08 V


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23010 · Knee-and-Column Milling Machine

          OERLIKON - M08 V - - 1973 -

          Technical details
          x-travel 900 mm︱y-travel 400 mm︱z-travel 500 mm︱table surface area 1300 x 350 mm︱quill stroke 180 mm︱total power requirement 6,4 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 2,4 x 2,0 x 2,5 m︱
            x-travel 900 mm
            y-travel 400 mm
            z-travel 500 mm
            table surface area 1300 x 350 mm
            quill stroke 180 mm
            total power requirement 6,4 kW
            weight of the machine ca. 3,4 t
            dimensions of the machine ca. 2,4 x 2,0 x 2,5 m
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used Metal Processing milling machining centers - vertical HURCO VMX 30


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24070 · milling machining centers - vertical

          HURCO - VMX 30 - - 2001 - Ultimax 4

          Technical details
          x-travel 762 mm︱y-travel 508 mm︱z-travel 610 mm︱control Ultimax 4 ︱tool change unit 24 ︱total power requirement kW︱weight of the machine ca. 5,2 t︱dimensions of the machine ca. 4,0 x 3,0 x 3,2 m︱
            x-travel 762 mm
            y-travel 508 mm
            z-travel 610 mm
            control Ultimax 4
            tool change unit 24
            weight of the machine ca. 5,2 t
            dimensions of the machine ca. 4,0 x 3,0 x 3,2 m
          Datasheet
          Request / Contact

          Spline Shaft Milling Machine

          used Metal Processing Spline Shaft Milling Machine HURTH LKF 33


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23074 · Spline Shaft Milling Machine

          HURTH - LKF 33 - - -

          Technical details
          max. workpiece diameter 300 mm︱hobbing length 1000 mm︱clamping length 2400 mm︱spindle head ISO 40 ︱distance work spindle /surface of the table 180 - 330 mm︱surface area 2410 x 375 mm︱longitudinal feed 1000 mm︱vertical movement of the milling spindle 150 mm︱turning speeds 45 - 500 U/min︱total power requirement kW︱weight of the machine ca. 5,6 t︱dimensions of the machine ca. 3,0 x 1,6 x 1,9 m︱
            max. workpiece diameter 300 mm
            hobbing length 1000 mm
            clamping length 2400 mm
            spindle head ISO 40
            distance work spindle /surface o. 180 - 330 mm
            surface area 2410 x 375 mm
            longitudinal feed 1000 mm
            vertical movement of the milling. 150 mm
            turning speeds 45 - 500 U/min
            weight of the machine ca. 5,6 t
            dimensions of the machine ca. 3,0 x 1,6 x 1,9 m
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used Metal Processing Tool Room Milling Machine - Universal DECKEL FP4 NC


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22073 · Tool Room Milling Machine - Universal

          DECKEL - FP4 NC - - 1985 -

          Technical details
          x-travel 600 mm︱y-travel 500 mm︱z-travel 500 mm︱spindle taper 40 SK︱turning speed range 18 - 6300 U/min︱paper band filter 515 mm︱table load 350 kg︱air temperature of the exhaust valve 0,001 mm︱hollow in the drive pipe 8 kW︱rated capacity boring motor 3600 x 4900 mm︱ 3300 kg︱ 475 kg︱total power requirement 380 50 23 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱cooling system ︱cooling & used oil box ︱and control ︱operater manuals
          Machine from training workshop! ° Engine brake ° Safety handwheels ° 2 x emergency stop switches Accesories: * Rigid angle table * Coolant facility
            x-travel 600 mm
            y-travel 500 mm
            z-travel 500 mm
            spindle taper 40 SK
            turning speed range 18 - 6300 U/min
            paper band filter 515 mm
            table load 350 kg
            air temperature of the exhaust v. 0,001 mm
            hollow in the drive pipe 8 kW
            rated capacity boring motor 3600 x 4900 mm
            3300 kg
            475 kg
            total power requirement 380 50 23 kW
            Description :
            Machine from training workshop!
            ° Engine brake
            ° Safety handwheels
            ° 2 x emergency stop switches
            Accesories:
            * Rigid angle table
            * Coolant facility
          Datasheet
          Request / Contact
          used Metal Processing Tool Room Milling Machine - Universal DECKEL FP 2 NC / DIALOG 11


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22074 · Tool Room Milling Machine - Universal

          DECKEL - FP 2 NC / DIALOG 11 - - 1984 -

          Technical details
          x-travel 300 mm︱y-travel 300 mm︱z-travel 400 mm︱CNC-control DIALOG 11 ︱spindle taper ISO 40 ︱spindle turning speed range 31 - 5.000 U/min︱table-size 620 x 390 mm︱table load 250 kg︱power capacity 5,5 kW︱feeds -stepless- 2 - 6.000 mm/min︱quill stroke 80 mm︱coolant ︱voltage 380 V︱total power requirement 11,0 kVA︱weight of the machine ca. 1,65 t︱dimensions of the machine ca. 1,85 x 1,90 x 1,80 m︱electric cabinet 1,35 x 0,70 x 1,70 m︱coolant tank 1,00 x 0,45 x 0,20 m︱
          Machine from training workshop! ° Engine brake ° Safety handwheels ° 2 x emergency stop switches Accesories: * Rigid angle table * Coolant facility
            x-travel 300 mm
            y-travel 300 mm
            z-travel 400 mm
            CNC-control DIALOG 11
            spindle taper ISO 40
            spindle turning speed range 31 - 5.000 U/min
            table-size 620 x 390 mm
            table load 250 kg
            power capacity 5,5 kW
            feeds -stepless- 2 - 6.000 mm/min
            quill stroke 80 mm
            voltage 380 V
            total power requirement 11,0 kVA
            weight of the machine ca. 1,65 t
            dimensions of the machine ca. 1,85 x 1,90 x 1,80 m
            electric cabinet 1,35 x 0,70 x 1,70 m
            coolant tank 1,00 x 0,45 x 0,20 m
            Description :
            Machine from training workshop!
            ° Engine brake
            ° Safety handwheels
            ° 2 x emergency stop switches
            Accesories:
            * Rigid angle table
            * Coolant facility
          Datasheet
          Request / Contact
          used Metal Processing Tool Room Milling Machine - Universal DECKEL FP 2 NC / DIALOG 11


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22072 · Tool Room Milling Machine - Universal

          DECKEL - FP 2 NC / DIALOG 11 - - 1983 - Grundig Dialog 11

          Technical details
          x-travel 300 mm︱y-travel 300 mm︱z-travel 400 mm︱CNC-control DIALOG 11 ︱spindle taper ISO 40 ︱spindle turning speed range 31 - 5.000 U/min︱table-size 620 x 390 mm︱table load 250 kg︱feeds -stepless- 2 - 6.000 mm/min︱power capacity 5,5 kW︱quill stroke 80 mm︱voltage 380 V︱Control Grundig Dialog 11 ︱total power requirement 11,0 kVA︱weight of the machine ca. 1,65 t︱dimensions of the machine ca. 1,85 x 1,90 x 1,80 m︱
          Machine from training workshop! ° Engine brake ° Safety handwheels ° 2 x emergency stop switches Accesories: * Rigid angle table * Coolant facility
            x-travel 300 mm
            y-travel 300 mm
            z-travel 400 mm
            CNC-control DIALOG 11
            spindle taper ISO 40
            spindle turning speed range 31 - 5.000 U/min
            table-size 620 x 390 mm
            table load 250 kg
            feeds -stepless- 2 - 6.000 mm/min
            power capacity 5,5 kW
            quill stroke 80 mm
            voltage 380 V
            Control Grundig Dialog 11
            total power requirement 11,0 kVA
            weight of the machine ca. 1,65 t
            dimensions of the machine ca. 1,85 x 1,90 x 1,80 m
            Description :
            Machine from training workshop!
            ° Engine brake
            ° Safety handwheels
            ° 2 x emergency stop switches
            Accesories:
            * Rigid angle table
            * Coolant facility
          Datasheet
          Request / Contact

          Universal Milling Machine

          used Metal Processing Universal Milling Machine KUNZMANN WF 4


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22063 · Universal Milling Machine

          KUNZMANN - WF 4 - - 1999 - HEIDENHAIN TNC 410

          Technical details
          x-travel 400 mm︱y-travel 320 mm︱z-travel 400 mm︱Control HEIDENHAIN TNC 410 ︱spindle turning speed - stepless 0 - 4000 U/min︱quill stroke 60 mm︱tool taper SK 40 ︱table surface area 650 x 350 mm︱total power requirement 6,5 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2,5 x 1,8 x 2,0 m︱
          Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...
            x-travel 400 mm
            y-travel 320 mm
            z-travel 400 mm
            Control HEIDENHAIN TNC 410
            spindle turning speed - stepless 0 - 4000 U/min
            quill stroke 60 mm
            tool taper SK 40
            table surface area 650 x 350 mm
            total power requirement 6,5 kW
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 2,5 x 1,8 x 2,0 m
            Description :
            Electric handwheel HR 410
            Probe MP 11, automatic tool measurement TT 120
            Cabin, tool holders,...
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   


          The right used metal processing machines at LagerMaschinen.de
          Used metal processing machines for every occasion

          Metalworking comprises a variety of applications involving the manipulation of metal from large-scale production of metals including lathing milling and cutting to smaller operations such as jewellery working. No matter the application used metal processing machines present an ideal way of obtaining the equipment you need at a price you can afford. Used metal processing machines such as milling machines can be manually operated or using computer numeric control which increases the overall precision of the machine. The type of used metal processing machines you need depends on the applications you use but at LagerMaschinen.de you are sure to find what you’re looking for.

          The right machine for every field of application

          Used metal processing machines can be used in several fields. Companies active in the computer industry can obtain used metal processing machines for circuit board soldering and companies that need to bond different pieces can find the welding machines that they need. If your company is in the business of making the precision parts needed to make other precision machines then used grinding machines can be a great way to expand or refurbish your production lines. Used metal processing machines can also be found for lathing drilling milling and several other uses.

          Used equipment from LagerMaschinen.de

          No matter the type of equipment you will find the used metal processing machines you need at LagerMaschinen.de. With its international network of suppliers this platform can provide you with the used metal processing machines you need at a price you can afford.

          Emuk Maschinenhandel GmbH   76316 - Malsch Siemensstrasse 24 Deutschland
          Emuk Maschinenhandel GmbH

          Siemensstrasse 24



          Contact Trader


            Emuk Maschinenhandel GmbH
           Siemensstrasse 24
            76316 - Malsch
            Deutschland
            +49 (0) 7246 943161
           
            info@emuk.info
            www.emuk.info
            Contact person:

           




          Machine category


          Absauganlage · Absaugung · Bandschleifmaschine · Bandsäge - Automatisch · Bandsäge - Vertikal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · Bohr- und Fräsmaschine · Bolzenschweißgerät · Bügelsäge - Automatisch · Bürst- und Poliermaschine · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppelschleifbock · Einständer - Richtpresse · Elektro - Hubwagen · Endenbearbeitungsmaschine · Erodiermaschine · Flachschleifmaschine - Horizontal · Fräser · Fräsmaschine - Universal · Fräsmaschine-Doppelspindel · Frässtichel-Schleifmaschine · Gewinde-Schnecken-Schleifmaschine · Gewindewalzmaschine · Handhebelpresse · Honmaschine - Innen - Horizontal · Kantenschleifmaschine · Kegelradhobelmaschine · Keilwellenfräsmaschine · Konsolfräsmaschine · Kreissägenschärfmaschine · Kurzhobler · Kühlmittelanlage · Langgewinde- und Abwälzfräsmaschine · Leit- und Zugspindeldrehmaschine · Mechanikerdrehbank · Messerschleifmaschine · Notstromaggregat · Papierpresse · Reihenbohrmaschine · Rundlaufprüfgerät · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Scheren-Hubtisch · Schleifscheibe · Schleifscheibenprofiliergerät · Spitzenlose - Rundschleifmaschine · Stanzautomat · Stoßmaschine - Vertikal · Ständerbohrmaschine · Superfinishmaschine · Sägeblattschärfmaschine · Säulenbohrmaschine · Tischbohrmaschine · Waschanlage - Manuell · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine · Werkzeugschleifmaschine - Universal · Wälzfräserschärfmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradprüfmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zahnstangenfräsmaschine · Zahnstangenstossmaschine · Zentrumschleifmaschine · Zubehör · Ölzentrifuge ·