,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Lathes

          Machinelist: Lathes


          CNC Lathe

          used Lathes CNC Lathe DMG GILDEMEISTER MSL 60/7


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202274 · CNC Lathe

          DMG GILDEMEISTER - MSL 60/7 - - 2015 - Fanuc 31 i

          Technical details
          Axis: 7 ︱Control Fanuc 31 i ︱main spindle: ︱max. rod diameter 60 mm︱max. turning speeds 5000 min/-1︱spindle motor 7,5/5,5 kW︱sub spindle: ︱max. turning diameter 42 mm︱max. turning speeds 5000 min/-1︱spindle motor 3,7/2,2 kW︱Axis: ︱max speed (Z4) 15 m/min︱max. acceleration 5 m/s2︱travel X1 / X2 / X3 60 mm︱travel X4 130 mm︱travel Z2 80 mm︱tavel Z3 80 mm︱travel Z4 340 mm︱Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N︱Tool holder slide 1:
          In our assessment, the machine is in a very good used condition State and can be viewed by appointment. - Bar loader, usable length 5m *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            Axis: 7
            Control Fanuc 31 i
            max. rod diameter 60 mm
            max. turning speeds 5000 min/-1
            spindle motor 7,5/5,5 kW
            max. turning diameter 42 mm
            max. turning speeds 5000 min/-1
            spindle motor 3,7/2,2 kW
            max speed (Z4) 15 m/min
            max. acceleration 5 m/s2
            travel X1 / X2 / X3 60 mm
            travel X4 130 mm
            travel Z2 80 mm
            tavel Z3 80 mm
            travel Z4 340 mm
            Nominal thrust X1 / X2 / X3 / X4. 4400 N
            Description :
            In our assessment, the machine is in a very good used condition
            State and can be viewed by appointment.

            - Bar loader, usable length 5m

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe DMG GILDEMEISTER CTX  ALPHA 500 V6


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03868 · CNC Lathe

          DMG GILDEMEISTER - CTX ALPHA 500 V6 - - 2011 - SIEMENS 840 D

          Technical details
          swing diameter 500 mm︱swing diameter above cross guideway 200 mm︱control SIEMENS 840 D ︱x-axis 190 mm︱z-axis 525 mm︱ ︱Main spindle: ︱power capacity - main spindel 20/15 kW︱turning speeds 20 - 6000 U/min︱Torque 127/95 Nm︱spindle head 140H5 ︱Bar feed 52 mm︱spindle diameter in front bearing 100 mm︱ ︱turret: ︱tool numbers 12 ︱driven tool (option) 12 ︱Shank diameter 30 mm︱power capacity - milling spindle 5.4 kW︱Torque 18 Nm︱
          Gildemeister CTX ALPHA 500 cnc lathe WITH C AND Y AXIS+ sup spindel - milling tools CHIP CONVOYER
            swing diameter 500 mm
            swing diameter above cross guide. 200 mm
            control SIEMENS 840 D
            x-axis 190 mm
            z-axis 525 mm
            power capacity - main spindel 20/15 kW
            turning speeds 20 - 6000 U/min
            Torque 127/95 Nm
            spindle head 140H5
            Bar feed 52 mm
            spindle diameter in front bearin. 100 mm
            tool numbers 12
            driven tool (option) 12
            Shank diameter 30 mm
            power capacity - milling spindle 5.4 kW
            Torque 18 Nm
            Description :
            Gildemeister CTX ALPHA 500
            cnc lathe
            WITH C AND Y AXIS+ sup spindel
            - milling tools
            CHIP CONVOYER


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe DMG GILDEMEISTER CTX ALPHA 500


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19803 · CNC Lathe

          DMG GILDEMEISTER - CTX ALPHA 500 - - 2011 - SIEMENS 840 D

          Technical details
          swing diameter 500 mm︱swing diameter above cross guideway 200 mm︱turning length 500 mm︱control SIEMENS 840 D ︱x-axis 190 mm︱z-axis 525 mm︱Main spindle: ︱power capacity - main spindel 14/13 kW︱turning speeds 20 - 6000 U/min︱Torque 192/172 Nm︱spindle head 140H5 ︱Bar feed 52 mm︱spindle diameter in front bearing 100 mm︱turret: ︱tool numbers 12 ︱Shank diameter 30 mm︱power capacity - milling spindle 5.4 kW︱Torque 18 Nm︱tool spindle speed range 5000 min/-1︱Clamping diameter milling tools 25 mm︱
          4 axes CNC lathe - CNC control Siemens 840D solutionline with CELOS and ShopTurn 3G - main & counter spindle - C- & Y-axis (+/- 40 mm) - 12-axis turret with driven tools (VDI 30) - Hainbuch chuck - chip conveyor with 6 motorized tools and a lot of tooling 37800h running hours and 19800 spindle hours
            swing diameter 500 mm
            swing diameter above cross guide. 200 mm
            turning length 500 mm
            control SIEMENS 840 D
            x-axis 190 mm
            z-axis 525 mm
            power capacity - main spindel 14/13 kW
            turning speeds 20 - 6000 U/min
            Torque 192/172 Nm
            spindle head 140H5
            Bar feed 52 mm
            spindle diameter in front bearin. 100 mm
            tool numbers 12
            Shank diameter 30 mm
            power capacity - milling spindle 5.4 kW
            Torque 18 Nm
            tool spindle speed range 5000 min/-1
            Clamping diameter milling tools 25 mm
            Description :
            4 axes CNC lathe
            - CNC control Siemens 840D solutionline with CELOS and ShopTurn 3G
            - main & counter spindle
            - C- & Y-axis (+/- 40 mm)
            - 12-axis turret with driven tools (VDI 30)
            - Hainbuch chuck
            - chip conveyor

            with 6 motorized tools and a lot of tooling
            37800h running hours and 19800 spindle hours


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe DMG GILDEMEISTER NEF 400


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023250 · CNC Lathe

          DMG GILDEMEISTER - NEF 400 - - 2010 - Siemens 840D

          Technical details
          turning diameter 350 mm︱turning length 650 mm︱control Siemens 840D ︱turning diameter over bed 385 mm︱main spindle: ︱turning speed range - main spindle 0 - 4.000 min/-1︱max. torque 340 Nm︱tool turret: ︱number of tool places 12 Pos.︱tool adaptor VDI 30 ︱travel: ︱x-axis 255 mm︱z-axis 800 mm︱total power requirement 21 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 5 x 2,5 x 2 m︱
          In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. Technical features: - Operating hours: approx. 23,000 hours - Spindle hours: approx. 10,000h ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 350 mm
            turning length 650 mm
            control Siemens 840D
            turning diameter over bed 385 mm
            turning speed range - main spind. 0 - 4.000 min/-1
            max. torque 340 Nm
            number of tool places 12 Pos.
            tool adaptor VDI 30
            x-axis 255 mm
            z-axis 800 mm
            total power requirement 21 kW
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 5 x 2,5 x 2 m
            Description :
            In our opinion, the machine is in good used condition
            Condition and can be viewed under power by appointment.

            Technical features:
            - Operating hours: approx. 23,000 hours
            - Spindle hours: approx. 10,000h

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used Lathes Turning Automatic Lathe - swiss lathe DMG GILDEMEISTER MSL 60-7


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202261 · Turning Automatic Lathe - swiss lathe

          DMG GILDEMEISTER - MSL 60-7 - - 2008 - Fanuc

          Technical details
          Axis 7 ︱control Fanuc ︱main spindle: ︱turning diameter 60 mm︱spindle tunring speed 5000 U/min︱spindle motor 7,5/5,5 kW︱sub spindle: ︱max. turning diameter 42 mm︱max. turning speeds 5000 min/-1︱spindle motor 3,7/2,2 kW︱Axis: ︱max speed (Z4) 15 m/min︱max. acceleration 5 m/s2︱travel X1 / X2 / X3 60 mm︱travel X4 130 mm︱travel Z2 80 mm︱tavel Z3 80 mm︱travel Z4 340 mm︱Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N︱Tool holder slide 1:
          In our assessment, the machine is in a very good used condition State and can be viewed by appointment. - Bar feeder interface - chip conveyor *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            Axis 7
            control Fanuc
            turning diameter 60 mm
            spindle tunring speed 5000 U/min
            spindle motor 7,5/5,5 kW
            max. turning diameter 42 mm
            max. turning speeds 5000 min/-1
            spindle motor 3,7/2,2 kW
            max speed (Z4) 15 m/min
            max. acceleration 5 m/s2
            travel X1 / X2 / X3 60 mm
            travel X4 130 mm
            travel Z2 80 mm
            tavel Z3 80 mm
            travel Z4 340 mm
            Nominal thrust X1 / X2 / X3 / X4. 4400 N
            Description :
            In our assessment, the machine is in a very good used condition
            State and can be viewed by appointment.

            - Bar feeder interface
            - chip conveyor

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turning Machine

          used Lathes Vertical Turning Machine DMG GILDEMEISTER CTV 160


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023155 · Vertical Turning Machine

          DMG GILDEMEISTER - CTV 160 - - 2008 - Siemens Sinumerik 840 D

          Technical details
          turning diameter 160 mm︱turning height 160 mm︱control Siemens Sinumerik 840 D ︱travel: ︱x-axis 575 mm︱y-axis +/- 90 mm︱z-axis 300 mm︱main spindle: ︱max. turning speeds 6000 min/-1︱drive capacity - main spindle 21 / 16 kW︱max. torque 176 Nm︱spindle head 140h5 ︱spindle diameter in front bearing 100 mm︱chucking diameter 160 (200) mm︱C-Axis 0,001 °︱total power requirement 40 kW︱weight of the machine ca. 5,3 t︱dimensions of the machine ca. 6,5 x 4,5 x 3 m︱
          In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. technical features - ShopTurn ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 160 mm
            turning height 160 mm
            control Siemens Sinumerik 840 D
            x-axis 575 mm
            y-axis +/- 90 mm
            z-axis 300 mm
            max. turning speeds 6000 min/-1
            drive capacity - main spindle 21 / 16 kW
            max. torque 176 Nm
            spindle head 140h5
            spindle diameter in front bearin. 100 mm
            chucking diameter 160 (200) mm
            C-Axis 0,001 °
            total power requirement 40 kW
            weight of the machine ca. 5,3 t
            dimensions of the machine ca. 6,5 x 4,5 x 3 m
            Description :
            In our opinion, the machine is in good used condition
            Condition and can be viewed under power by appointment.

            technical features
            - ShopTurn

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.