,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Lathes

          Machinelist: Lathes


          Bench Lathe

          used Lathes Bench Lathe HBM 250 x 550 Norton Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Profi Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 290 x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          Center Lathe

          used Lathes Center Lathe HBM 400 x 1000 DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78066 · Center Lathe

          HBM - 400 x 1000 DRO - - -

          Technical details
          turning diameter over bed 400 mm︱turning diameter over slide rest 264 mm︱turning length 1000 mm︱turning diameter in the gap 550 mm︱turning speeds 44 - 2000 U/min︱centre height 200 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 MK︱connected load frequency 400 V︱total power requirement 1,5 / 2,4 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,56 m︱
          3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools
            turning diameter over bed 400 mm
            turning diameter over slide rest 264 mm
            turning length 1000 mm
            turning diameter in the gap 550 mm
            turning speeds 44 - 2000 U/min
            centre height 200 mm
            spindle bore 52 mm
            tailstock quill taper MT 4 MK
            connected load frequency 400 V
            total power requirement 1,5 / 2,4 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 1,9 x 0,8 x 1,56 m
            Description :
            3-axis digital display
            3-jaw chuck 200 mm.
            4-jaw chuck 200 mm.
            Faceplate 320mm
            bezel fixed
            running bezel
            4-fold steel holder.
            Halogen machine light
            machine light
            foot brake
            removable chip tray, chip protection wall
            Hardened and ground bed tracks
            Complete coolant system
            lining protection
            machine tools


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HBM 330 x 600


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78063 · Center Lathe

          HBM - 330 x 600 - - -

          Technical details
          turning diameter over bed 320 mm︱turning diameter over slide rest 220 mm︱turning length 600 mm︱turning diameter in the gap 320 mm︱turning speeds 60 - 1650 U/min︱centre height 160 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱connected load frequency 400 V︱total power requirement 1,1 kW︱weight of the machine ca. 340 Kg︱dimensions of the machine ca. 1,4 x 0,75 x 0,7 m︱
          Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools
            turning diameter over bed 320 mm
            turning diameter over slide rest 220 mm
            turning length 600 mm
            turning diameter in the gap 320 mm
            turning speeds 60 - 1650 U/min
            centre height 160 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            connected load frequency 400 V
            total power requirement 1,1 kW
            weight of the machine ca. 340 Kg
            dimensions of the machine ca. 1,4 x 0,75 x 0,7 m
            Description :
            Center lathe with:
            3-jaw chuck 160 mm.
            4-jaw chuck 200 mm.
            Faceplate 200mm
            Fixed bezel
            Continuous bezel
            4-way steel holder.
            Halogen machine light
            Chip tray, chip protection wall
            Hardened and ground bed tracks
            Longitudinal and cross feed
            Complete coolant system
            Forage protection
            Set of change gears
            Machine tools


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HBM 360 x 1000 DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78070 · Center Lathe

          HBM - 360 x 1000 DRO - - -

          Technical details
          turning diameter over bed 360 mm︱turning diameter over slide rest 220 mm︱turning length 1000 mm︱turning diameter in the gap 380 mm︱turning speeds 70 - 2000 U/min︱centre height 180 mm︱spindle bore 50 mm︱tailstock quill taper MT 3 MK︱connected load frequency 230 oder 400 V︱total power requirement 1,8 kW︱weight of the machine ca. 0.65 t︱dimensions of the machine ca. 2,0 x 0,8 x 1,56 m︱
          3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools
            turning diameter over bed 360 mm
            turning diameter over slide rest 220 mm
            turning length 1000 mm
            turning diameter in the gap 380 mm
            turning speeds 70 - 2000 U/min
            centre height 180 mm
            spindle bore 50 mm
            tailstock quill taper MT 3 MK
            connected load frequency 230 oder 400 V
            total power requirement 1,8 kW
            weight of the machine ca. 0.65 t
            dimensions of the machine ca. 2,0 x 0,8 x 1,56 m
            Description :
            3-axis digital display
            3-jaw chuck 200 mm.
            4-jaw chuck 200 mm.
            Faceplate 320mm
            bezel fixed
            running bezel
            4-fold steel holder.
            Halogen machine light
            machine light
            foot brake
            removable chip tray, chip protection wall
            Hardened and ground bed tracks
            Complete coolant system
            lining protection
            machine tools


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HBM 320 x 900 Professionele


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78071 · Center Lathe

          HBM - 320 x 900 Professionele - - -

          Technical details
          turning diameter over bed 320 mm︱turning diameter over slide rest 200 mm︱turning length 900 mm︱turning diameter in the gap mm︱turning speeds 75 - 2000 U/min︱centre height 160 mm︱spindle bore 50 mm︱tailstock quill taper MT 3 MK︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,29 t︱dimensions of the machine ca. 2,0 x 0,8 x 1,56 m︱
          Professional lathe digital display 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools
            turning diameter over bed 320 mm
            turning diameter over slide rest 200 mm
            turning length 900 mm
            turning speeds 75 - 2000 U/min
            centre height 160 mm
            spindle bore 50 mm
            tailstock quill taper MT 3 MK
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,29 t
            dimensions of the machine ca. 2,0 x 0,8 x 1,56 m
            Description :
            Professional lathe
            digital display
            3-jaw chuck
            4-jaw chuck
            faceplate
            bezel fixed
            running bezel
            Quick-change steel holder with 4 cassettes
            Halogen machine light
            Chip tray, chip protection wall
            Hardened and ground bed tracks
            Complete coolant system
            feed protection
            machine tools


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.