,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Facing and Centering Lathe

          Machinelist: Facing and Centering Lathe


          Facing and Centering Lathe

          used Lathes Facing and Centering Lathe WMW ZERBST DP 4000 ... DP 5000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05430 · Facing and Centering Lathe

          WMW ZERBST - DP 4000 ... DP 5000 - - retrofit 2014 -

          Technical details
          turning diameter over bed 5000 mm︱turning diameter over slide rest 4000 mm︱turning length 22000 mm︱total power requirement 36 kW︱weight of the machine ca. 53,5 t︱dimensions of the machine ca. m︱
          Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Main motor 30 kw - Torque on the faceplate 61803 Nm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After the overhaul, the lathe was no longer operational. Machine is dismantled and stored near Hamburg.
            turning diameter over bed 5000 mm
            turning diameter over slide rest 4000 mm
            turning length 22000 mm
            total power requirement 36 kW
            weight of the machine ca. 53,5 t
            Description :
            Facing and Centering Lathe with plate field

            - Max. Turning diameter over the bed slide 4000 mm
            - Max. Turning diameter 5000 mm
            - Max. Turning length: 22000 mm
            - Face plate speed range 0.9 - 56 rpm
            - Faceplate diameter 4420 mm
            - Main motor 30 kw
            - Torque on the faceplate 61803 Nm
            - Max. Workpiece weight between the centers: 20 t
            - Max. workpiece weight -without tailstock: 12,5 t

            - Two bed slides with 4500 mm turning length
            - With plate fields
            - A roller block
            - With tailstock

            Machine was overhauled in Italy in 2014 with stepless speed control.
            After the overhaul, the lathe was no longer operational.

            Machine is dismantled and stored near Hamburg.


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing and Centering Lathe WMW Niles DPS1400...DPS1800/1


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D362 · Facing and Centering Lathe

          WMW Niles - DPS1400...DPS1800/1 - - 1976 -

          Technical details
          Distance between centers 5000 mm︱Centerheight 1000 mm︱Swing over bed 2500 mm ø︱Swing over support 1700 mm ø︱Jawplate diameter 1250 mm︱Power 34 kW︱Current 116 A︱
          3-lane bed 6 claw: 700 mm ø Machine number: 35-0462 Machine weight: +/- 20,000 kg
            Distance between centers 5000 mm
            Centerheight 1000 mm
            Swing over bed 2500 mm ø
            Swing over support 1700 mm ø
            Jawplate diameter 1250 mm
            Power 34 kW
            Current 116 A
            Description :
            3-lane bed
            6 claw: 700 mm ø
            Machine number: 35-0462
            Machine weight: +/- 20,000 kg


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes Facing and Centering Lathe WEVERK Karlstadt PS 12.5


          • desba TRADING
          • Im Hofgarten 6
          • 61130 Nidderau
          • Deutschland

          • +49 (0)6187 20 30 749
          • info@desba-trading.de
            www.desba-trading.de
          #2072-2133 · Facing and Centering Lathe

          WEVERK Karlstadt - PS 12.5 - - 1952 -

          Technical details
          turning diameter over bed 2500 mm︱turning diameter over slide rest 3000 mm︱turning length 5000 mm︱total power requirement 12 kW︱weight of the machine ca. 30 t︱dimensions of the machine ca. m︱
            turning diameter over bed 2500 mm
            turning diameter over slide rest 3000 mm
            turning length 5000 mm
            total power requirement 12 kW
            weight of the machine ca. 30 t


        • desba TRADING
        • Im Hofgarten 6
        • 61130 Nidderau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Facing and Centering Lathe JMTCL CW61125B


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D273 · Facing and Centering Lathe

          JMTCL - CW61125B - - -

          Technical details
          Distance between centers 1500 mm︱Centerheight 625 mm︱Swing over bed 1250 mm ø︱Swing over support 850 mm ø︱Spindle boring 135 mm ø︱
          Digital readout
            Distance between centers 1500 mm
            Centerheight 625 mm
            Swing over bed 1250 mm ø
            Swing over support 850 mm ø
            Spindle boring 135 mm ø
            Description :
            Digital readout


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes Facing and Centering Lathe NN


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D680 · Facing and Centering Lathe

          NN - - - -

          Technical details
          Centerheight 900 mm︱Swing over bed 1800 mm ø︱Spindle boring 330 mm ø︱
          Manipulator Drive by means of V-belts No electric motor available Machine dimensions (LxWxH): 1,100 x 2,100 x 1,500 mm Machine weight: +/- 2.500 kg
            Centerheight 900 mm
            Swing over bed 1800 mm ø
            Spindle boring 330 mm ø
            Description :
            Manipulator
            Drive by means of V-belts
            No electric motor available
            Machine dimensions (LxWxH): 1,100 x 2,100 x 1,500 mm
            Machine weight: +/- 2.500 kg


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes Facing and Centering Lathe Heyligenstaedt


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D387 · Facing and Centering Lathe

          Heyligenstaedt - - - -

          Technical details
          Swing over bed 2500 mm ø︱4-Jaw chuck 1250 mm ø︱Power kW︱
          No electrical control box available
            Swing over bed 2500 mm ø
            4-Jaw chuck 1250 mm ø
            Description :
            No electrical control box available


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes Facing and Centering Lathe Tadu


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D720 · Facing and Centering Lathe

          Tadu - - - -

          Technical details
          CNC brand Fagor ︱CNC model 8050 T ︱Swing over bed 2500 mm ø︱4-Jaw chuck 1800 mm ø︱
          Center
            CNC brand Fagor
            CNC model 8050 T
            Swing over bed 2500 mm ø
            4-Jaw chuck 1800 mm ø
            Description :
            Center


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes Facing and Centering Lathe Ravensburg


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D618 · Facing and Centering Lathe

          Ravensburg - - - -

          Technical details
          Centerheight 650 mm︱Swing over bed 1300 mm ø︱Maximum turning length 500 mm︱Jawplate diameter 1200 mm︱Power 5,5 kW︱
          With grinding device Equipped with new electrical installation
            Centerheight 650 mm
            Swing over bed 1300 mm ø
            Maximum turning length 500 mm
            Jawplate diameter 1200 mm
            Power 5,5 kW
            Description :
            With grinding device
            Equipped with new electrical installation


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes Facing and Centering Lathe Ravensburg


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D262 · Facing and Centering Lathe

          Ravensburg - - - -

          Technical details
          Swing over bed 1500 mm ø︱Maximum turning length 800 mm︱Jawplate diameter 1300 mm︱
          Head can be moved hydraulically Chisel support hydraulically driven
            Swing over bed 1500 mm ø
            Maximum turning length 800 mm
            Jawplate diameter 1300 mm
            Description :
            Head can be moved hydraulically
            Chisel support hydraulically driven


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes Facing and Centering Lathe Heyligenstaedt DW1000


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D578 · Facing and Centering Lathe

          Heyligenstaedt - DW1000 - - -

          Technical details
          Centerheight 1000 mm︱Swing over bed 2000 mm ø︱Spindle boring 700 mm ø︱4-Jaw chuck 1900 mm ø︱
          Oil country lathe Loose chisel support Electrically movable head: 5,000 mm Center Equipped with new electrical installation
            Centerheight 1000 mm
            Swing over bed 2000 mm ø
            Spindle boring 700 mm ø
            4-Jaw chuck 1900 mm ø
            Description :
            Oil country lathe
            Loose chisel support
            Electrically movable head: 5,000 mm
            Center
            Equipped with new electrical installation


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes Facing and Centering Lathe WMW Niles DPS1400...DPS1800/1


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D364 · Facing and Centering Lathe

          WMW Niles - DPS1400...DPS1800/1 - - -

          Technical details
          Distance between centers 5000 mm︱Centerheight 700 mm︱Swing over bed 1400 mm ø︱Jawplate diameter 1200 mm︱Power 34 kW︱Current 118 A︱
          Machine weight: +/- 19,500 kg
            Distance between centers 5000 mm
            Centerheight 700 mm
            Swing over bed 1400 mm ø
            Jawplate diameter 1200 mm
            Power 34 kW
            Current 118 A
            Description :
            Machine weight: +/- 19,500 kg


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          lathe-conventional-electronic

          used Lathes lathe-conventional-electronic Pinacho S90-180


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3200045 · lathe-conventional-electronic

          Pinacho - S90-180 - - unbekannt -

          Technical details
          turning diameter 360 mm︱turning length 1000 mm︱swing diameter over bed slide 200 mm︱turning speeds 30 - 2000 U/min︱spindle bore 42 mm︱quill stroke 150 mm︱tailstock quill taper MT 3 ︱total power requirement 2,5 kW︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 2200 x 850 x 140 mm︱
          - 4-jaw chuck Ø160 mm RÖHM - MULTIFIX quick-change holder with 1x insert - movable tailstock - Lathe chuck protection - Chip back wall - Operation manual
            turning diameter 360 mm
            turning length 1000 mm
            swing diameter over bed slide 200 mm
            turning speeds 30 - 2000 U/min
            spindle bore 42 mm
            quill stroke 150 mm
            tailstock quill taper MT 3
            total power requirement 2,5 kW
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 2200 x 850 x 140 mm
            Description :
            - 4-jaw chuck Ø160 mm RÖHM
            - MULTIFIX quick-change holder with 1x insert
            - movable tailstock
            - Lathe chuck protection
            - Chip back wall
            - Operation manual



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic WEILER Praktikant


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6622 · lathe-conventional-electronic

          WEILER - Praktikant - - unbekannt -

          Technical details
          turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 800 mm︱spindle bore 35 mm︱turning speed range 42 - 2000 U/min︱feeds 0,011 - 0,91 mm/U︱tailstock quill taper MT 3 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,7 x 0,8 x 2,0 m︱
            turning diameter over bed 300 mm
            turning diameter over slide rest 150 mm
            turning length 800 mm
            spindle bore 35 mm
            turning speed range 42 - 2000 U/min
            feeds 0,011 - 0,91 mm/U
            tailstock quill taper MT 3
            total power requirement 2,2 kW
            weight of the machine ca. 0,75 t
            dimensions of the machine ca. 1,7 x 0,8 x 2,0 m
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic MVE BAUART VDF V 5 - 2000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6040 · lathe-conventional-electronic

          MVE BAUART VDF - V 5 - 2000 - - unbekannt -

          Technical details
          turning diameter over bed 580 mm︱turning diameter over slide rest 350 mm︱turning length 2000 mm︱centre height 280 mm︱bed width 490 mm︱spindle passage 81 mm︱turning speeds 18 ︱turning speed range 19 - 950 U/min︱total power requirement 11 kW︱weight of the machine ca. ca. 4,8 t︱dimensions of the machine ca. 4,5 x 1,8 x 1,6 m︱
          Electric 380Volt 3-jaw chuck Forkardt F 315 Quick change steel holder with various inserts machine light Machine feet (6 pieces) Revolving tip Coolant system
            turning diameter over bed 580 mm
            turning diameter over slide rest 350 mm
            turning length 2000 mm
            centre height 280 mm
            bed width 490 mm
            spindle passage 81 mm
            turning speeds 18
            turning speed range 19 - 950 U/min
            total power requirement 11 kW
            weight of the machine ca. ca. 4,8 t
            dimensions of the machine ca. 4,5 x 1,8 x 1,6 m
            Description :
            Electric 380Volt
            3-jaw chuck Forkardt F 315
            Quick change steel holder with various inserts
            machine light
            Machine feet (6 pieces)
            Revolving tip
            Coolant system


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic VDF-BOEHRINGER V5


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06571 · lathe-conventional-electronic

          VDF-BOEHRINGER - V5 - - unbekannt -

          Technical details
          centre distance 2800 mm︱ 900 mm ︱digital ︱weight of the machine ca. 5 t︱dimensions of the machine ca. m︱
            centre distance 2800 mm
            900 mm
            weight of the machine ca. 5 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK / ZMM CU400/1500


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200002 · lathe-conventional-electronic

          BULMAK / ZMM - CU400/1500 - - NEU -

          Technical details
          turning diameter 440 mm︱turning length 1500 mm︱swing diameter over bed slide 210 mm︱Swingdiameter in the bed bridge 620 mm︱centre height 210 mm︱reus 21 (20 - 2000) U/min︱tail stock MK5 ︱quill stroke 180 mm︱diameter of quill 70 mm︱spindle taper DIN 55027 Nr. 8 ︱spindle bore 62 mm︱feed längs 0,04 - 12 m/min︱feed quer 0,02 - 6 m/min︱total power requirement 7,5 kW︱weight of the machine ca. 2430 kg︱dimensions of the machine ca. 2850 x 980 x 1330 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 440 mm
            turning length 1500 mm
            swing diameter over bed slide 210 mm
            Swingdiameter in the bed bridge 620 mm
            centre height 210 mm
            reus 21 (20 - 2000) U/min
            tail stock MK5
            quill stroke 180 mm
            diameter of quill 70 mm
            spindle taper DIN 55027 Nr. 8
            spindle bore 62 mm
            feed längs 0,04 - 12 m/min
            feed quer 0,02 - 6 m/min
            total power requirement 7,5 kW
            weight of the machine ca. 2430 kg
            dimensions of the machine ca. 2850 x 980 x 1330 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK / ZMM CU325/1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200003 · lathe-conventional-electronic

          BULMAK / ZMM - CU325/1000 - - NEU -

          Technical details
          turning diameter 325 mm︱turning length 1000 mm︱swing diameter over bed slide 250 mm︱Swingdiameter in the bed bridge 440 mm︱reus 12 (85-2000) U/min︱tail stock MK 3 ︱quill stroke 100 mm︱diameter of quill 40 mm︱spindle taper DIN 55027 Nr. 5 ︱spindle bore 32 mm︱feed längs 0,006 - 1,77 m/min︱feed quer 0,003 - 0,885 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 770 kg︱dimensions of the machine ca. 2150 x 950 x 1350 mm︱
          Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall
            turning diameter 325 mm
            turning length 1000 mm
            swing diameter over bed slide 250 mm
            Swingdiameter in the bed bridge 440 mm
            reus 12 (85-2000) U/min
            tail stock MK 3
            quill stroke 100 mm
            diameter of quill 40 mm
            spindle taper DIN 55027 Nr. 5
            spindle bore 32 mm
            feed längs 0,006 - 1,77 m/min
            feed quer 0,003 - 0,885 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 770 kg
            dimensions of the machine ca. 2150 x 950 x 1350 mm
            Description :
            Furnishing:
            - Cooling device
            - Machine light
            - chip rear wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Foot pedal with braking function CE
            - Interchangeable gears

            *incl. Optional equipment
            - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type A, incl. 4 tool holders
            - 2-axis digital display DRO Newall


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic OPTIMUM OPTIturn TH4215D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200001 · lathe-conventional-electronic

          OPTIMUM - OPTIturn TH4215D - - NEU -

          Technical details
          turning diameter 420 mm︱turning length 1500 mm︱swing diameter over bed slide 250 mm︱Swingdiameter in the bed bridge 590 mm︱centre height 210 mm︱Turning length in the bed bridge 260 mm︱reus 16 (45-1800) U/min︱tail stock MK 4 ︱quill stroke 120 mm︱diameter of quill 50 mm︱spindle taper DIN ISO 702-2 Nr. 6 ︱spindle bore 52 mm︱spindle cone MK 6 ︱feed längs 17 / 0,05 - 1,7 m/min︱feed plan 17 / 0,025 - 0,85 m/min︱total power requirement 4,6 kW︱weight of the machine ca. 1340 kg︱dimensions of the machine ca. 2440 x 915 x 1375 mm︱
          Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool ** Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm ** Quick change holder SWH5-B set
            turning diameter 420 mm
            turning length 1500 mm
            swing diameter over bed slide 250 mm
            Swingdiameter in the bed bridge 590 mm
            centre height 210 mm
            Turning length in the bed bridge 260 mm
            reus 16 (45-1800) U/min
            tail stock MK 4
            quill stroke 120 mm
            diameter of quill 50 mm
            spindle taper DIN ISO 702-2 Nr. 6
            spindle bore 52 mm
            spindle cone MK 6
            feed längs 17 / 0,05 - 1,7 m/min
            feed plan 17 / 0,025 - 0,85 m/min
            total power requirement 4,6 kW
            weight of the machine ca. 1340 kg
            dimensions of the machine ca. 2440 x 915 x 1375 mm
            Description :
            Fully equipped master and feed spindle lathes. TH 4215 with
            digital position indicator DPA 21 / 3462070

            - Hardened and ground Z-axis guideway
            - Spindle mount Camlock DIN ISO 702-2 No. 6
            - Precisely crafted slide
            - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm
            - Quadruple steel holder
            - All guides can be adjusted using V-ledges
            - Adjustment range top slide ± 90°
            - Guaranteed concentricity of the spindle nose better than 0.015 mm
            - Main spindle running in oil bath
            - Smooth-running gear wheels, hardened and ground with 2 adjustable
            Precision tapered roller bearings
            - Hand wheels decoupled and tested according to EN 23125
            - Two-channel right-left switch tested according to EN 23125
            - Switch with life cycle calculation, tested according to EN ISO 13849
            - All metric pitches in the range 0.2 to 14mm/rev and all
            Inch threads in the range of 72 - 2 threads per inch without changing the
            Change gears adjustable by shift lever in the control panel
            - Clockwise/counterclockwise rotation can be switched on the bed slide via the
            switching spindle
            - Central lubrication in bed slide
            - Meehanite cast base and machine bed in one piece
            - Lead screw cover
            - Emergency stop device with foot control
            - Safety handwheels with snap-out function in the X and Z axes
            - Tailstock for taper turning adjustable ± 10 mm
            - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm
            - Quick, easy and tool-free adjustment using a clamping lever
            - Heavily ribbed prism bed, induction hardened and precision ground
            cast iron
            - Coolant device with separate coolant tank with level indicator and
            oil separator; easy and complete emptying and cleaning according to DIN
            - LED machine lamp in the chip guard

            Models TH 4210D and TH 4215D with digital readout DPA21
            - User-friendly membrane keyboard, splash-proof, closed
            andglare-free
            - Glass scales

            scope of delivery
            - Fixed bezel passage Ø 15 - 145 mm
            - Revolving bezel passage Ø 10 - 75 mm
            - LED machine light
            - Reducing sleeve MT 6 / MT 4
            - Fixed center MK 4
            - Change gear set
            - Position stop with fine adjustment
            - Initial filling of the machine with quality oil
            - Operating tool

            ** Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø
            250 mm
            ** Quick change holder SWH5-B set


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic OPTIMUM OPTIturn TH 3309D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7375 · lathe-conventional-electronic

          OPTIMUM - OPTIturn TH 3309D - - NEU -

          Technical details
          turning diameter 330 mm︱turning length 830 mm︱swing diameter over bed slide 196 mm︱Swingdiameter in the bed bridge 170 ︱centre height 165 mm︱centre distance 830 mm︱Turning length in the bed bridge 430 ︱reus 16 (70-2000) U/min︱tail stock MK 3 ︱quill stroke 110 mm︱diameter of quill 32 mm︱spindle taper DIN ISO 702-2 Nr. 4 ︱spindle bore 38 mm︱spindle cone MK 5 ︱feed längs 32 / 0,052 1,392 m/min︱feed plan 3,2 / 0,014 0,38 m/min︱total power requirement kW︱weight of the machine ca. 0,52 t︱dimensions of the machine ca. 1,7 x 0,75 x 1,6 m︱
          Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762
            turning diameter 330 mm
            turning length 830 mm
            swing diameter over bed slide 196 mm
            Swingdiameter in the bed bridge 170
            centre height 165 mm
            centre distance 830 mm
            Turning length in the bed bridge 430
            reus 16 (70-2000) U/min
            tail stock MK 3
            quill stroke 110 mm
            diameter of quill 32 mm
            spindle taper DIN ISO 702-2 Nr. 4
            spindle bore 38 mm
            spindle cone MK 5
            feed längs 32 / 0,052 1,392 m/min
            feed plan 3,2 / 0,014 0,38 m/min
            weight of the machine ca. 0,52 t
            dimensions of the machine ca. 1,7 x 0,75 x 1,6 m
            Description :
            Fully equipped leading and tension spindle lathes. TH 3309D with
            digital position indicator DPA 21/3402040

            - Hardened and ground Z-axis guideway
            - Spindle mount Camlock DIN ISO 702-2 No. 4
            - Precisely crafted slide
            - Handwheels with adjustable fine scale 0.04 / 0.02 mm
            - Quadruple steel holder
            - All guides can be adjusted using V-ledges
            - Main spindle running in an oil bath
            - Gear wheels run smoothly, hardened and ground
            - Upper slide adjustment range ± 90 °
            - Guaranteed concentricity of the spindle nose better than 0.015 mm
            - Handwheels decoupled and tested according to EN 23125
            - Safety handwheels with push-out function in the X and Z axes
            - Two-channel right-left switch tested according to EN 23125
            - DC 24 volt electrical system with two-channel safety circuit according to EN
            23125
            - Lathe chuck protection tested according to EN 23125
            - Switch with life cycle calculation, tested according to EN ISO 13849
            - Lockable main switch
            - Clockwise / counterclockwise rotation on the bed slide switchable
            - Lead screw cover
            - Tailstock for taper turning adjustable ± 10 mm
            - Tailstock quill and handwheel with adjustable fine scale 0.02 mm
            - Quick, easy and tool-free adjustment using a clamping lever
            - Heavily ribbed prism bed, inductively hardened and precision ground
            - Machine base with tool compartment on the right-hand side (left-hand side
            with 3
            Bezels (no compartments)
            - Pull-out chip tray with guide rails
            - Emergency stop device with foot actuation
            - LED machine lamp integrated in the chip guard

            Digital position indicator DPA 21
            - User-friendly membrane keyboard, splash-proof, closed
            and glare-free
            - glass rulers

            scope of delivery
            - Fixed steady rest passage Ø 6 - Ø 50 mm
            - Moving steady rest passage Ø 8 - Ø 30 mm
            - LED machine light
            - Reduction sleeve MK 5 / MK 3
            - Two fixed centering points MK 3
            - Quadruple steel holder 16 mm
            - Change gears set
            - machine base
            - Initial machine filling with quality oil
            - operating tool

            ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping
            Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK / ZMM C10TM/3000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200004 · lathe-conventional-electronic

          BULMAK / ZMM - C10TM/3000 - - NEU -

          Technical details
          turning diameter 760 mm︱turning length 3000 mm︱swing diameter over bed slide 520 mm︱centre height 380 mm︱reus 17 (7,5 - 1015) U/min︱tail stock MK6 ︱quill stroke 225 mm︱diameter of quill 105 mm︱spindle bore 132 mm︱feed längs 0,039 - 18 mm/min︱feed quer 0,02 - 9 mm/min︱total power requirement 15 kW︱weight of the machine ca. 4700 kg︱dimensions of the machine ca. 4900 x 1650 x 1650 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 760 mm
            turning length 3000 mm
            swing diameter over bed slide 520 mm
            centre height 380 mm
            reus 17 (7,5 - 1015) U/min
            tail stock MK6
            quill stroke 225 mm
            diameter of quill 105 mm
            spindle bore 132 mm
            feed längs 0,039 - 18 mm/min
            feed quer 0,02 - 9 mm/min
            total power requirement 15 kW
            weight of the machine ca. 4700 kg
            dimensions of the machine ca. 4900 x 1650 x 1650 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK / ZMM CU400/1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200005 · lathe-conventional-electronic

          BULMAK / ZMM - CU400/1000 - - NEU -

          Technical details
          turning diameter 440 mm︱turning length 1000 mm︱swing diameter over bed slide 210 mm︱Swingdiameter in the bed bridge 620 mm︱centre height 210 mm︱reus 21 (20 - 2000) U/min︱tail stock MK5 ︱quill stroke 180 mm︱diameter of quill 70 mm︱spindle taper DIN 55027 Nr. 8 ︱spindle bore 62 mm︱feed längs 0,04 - 12 m/min︱feed quer 0,02 - 6 m/min︱total power requirement 7,5 kW︱weight of the machine ca. 2250 kg︱dimensions of the machine ca. 2450 x 980 x 1330 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 440 mm
            turning length 1000 mm
            swing diameter over bed slide 210 mm
            Swingdiameter in the bed bridge 620 mm
            centre height 210 mm
            reus 21 (20 - 2000) U/min
            tail stock MK5
            quill stroke 180 mm
            diameter of quill 70 mm
            spindle taper DIN 55027 Nr. 8
            spindle bore 62 mm
            feed längs 0,04 - 12 m/min
            feed quer 0,02 - 6 m/min
            total power requirement 7,5 kW
            weight of the machine ca. 2250 kg
            dimensions of the machine ca. 2450 x 980 x 1330 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK / ZMM C10T


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200006 · lathe-conventional-electronic

          BULMAK / ZMM - C10T - - NEU -

          Technical details
          turning diameter 660 mm︱turning length 1500 mm︱swing diameter over bed slide 420 mm︱Swingdiameter in the bed bridge 850 mm︱centre height 330 mm︱reus 15 (9 - 1320) U/min︱tail stock MK6 ︱quill stroke 225 mm︱diameter of quill 105 mm︱spindle bore 103 mm︱feed längs 0,039 - 18 m/min︱feed quer 0,02 - 9 m/min︱total power requirement 11 kW︱weight of the machine ca. 4170 kg︱dimensions of the machine ca. 2850 x 980 x 1330 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 660 mm
            turning length 1500 mm
            swing diameter over bed slide 420 mm
            Swingdiameter in the bed bridge 850 mm
            centre height 330 mm
            reus 15 (9 - 1320) U/min
            tail stock MK6
            quill stroke 225 mm
            diameter of quill 105 mm
            spindle bore 103 mm
            feed längs 0,039 - 18 m/min
            feed quer 0,02 - 9 m/min
            total power requirement 11 kW
            weight of the machine ca. 4170 kg
            dimensions of the machine ca. 2850 x 980 x 1330 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic GILDEMEISTER MF 65


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06443 · lathe-conventional-electronic

          GILDEMEISTER - MF 65 - - 2x 1999 / 1x 2000 - 2x 840 D

          Technical details
          control 840 C ︱control 2x 840 DKühlmittelsystem ︱chip conveyor ja kW︱generator - rated current 95,00 A︱connected load 65,00 kW︱
            control 840 C
            control 2x 840 D
            Kühlmittelsystem
            chip conveyor ja kW
            generator - rated current 95,00 A
            connected load 65,00 kW


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic JMTCL CW61125B


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-D273 · lathe-conventional-electronic

          JMTCL - CW61125B - - 2021 -

          Technical details
          turning diameter 1250 mm︱turning length 1500 mm︱swing diameter over bed slide 850 mm︱total power requirement 22 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3100x2150x1825 m︱
          Brand: JMTCL Type: CW61125B Distance between centers: 1.500 mm Centerheight: 625 mm Swing over bed: 1.250 mm ø Swing over support: 850 mm ø Maximum turning diameter : 1.250ø x 1.500 mm ø Spindle boring: 135 mm ø
            turning diameter 1250 mm
            turning length 1500 mm
            swing diameter over bed slide 850 mm
            total power requirement 22 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3100x2150x1825 m
            Description :
            Brand: JMTCL
            Type: CW61125B
            Distance between centers: 1.500 mm
            Centerheight: 625 mm
            Swing over bed: 1.250 mm ø
            Swing over support: 850 mm ø
            Maximum turning diameter : 1.250ø x 1.500 mm ø
            Spindle boring: 135 mm ø


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •