,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX Beta 800


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2323 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX Beta 800 - - 2012 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 800 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. 6130 kg︱dimensions of the machine ca. m︱
          CNC turning and milling center in good condition with driven tools, C and Y axis, subspindle and CNC control Siemens 840 D. Operating hours according to the attached photo from February 8, 2024 The hours may increase as the machine is currently still in use. Max. workpiece diameter 410 mm Max. workpiece length 800 mm Max. travel X-axis 300 mm Max. travel Y-axis +/- 50 mm Max. travel Z-axis 850 mm Turning diameter over cross slide 250 mm Main spindle drive power 65 kW Spindle bore 75 mm Spindle speed of the main spindle 4000 rpm. Spindle speed of the counter spindle 5000 rpm. Equipment and accessories: Chip conveyor Coolant system with paper belt filter Oil mist extraction system Electrical control cabinet with air conditioning (tropical package) 3-jaw power chuck on main and subspindle Basic equipment of tool holders Documentation/Manual
            turning diameter 250 mm
            turning length 800 mm
            control Siemens 840 D
            weight of the machine ca. 6130 kg
            Description :
            CNC turning and milling center in good condition with driven tools,
            C and Y axis, subspindle and CNC control Siemens 840 D.

            Operating hours according to the attached photo from February 8, 2024
            The hours may increase as the machine is currently still
            in use.

            Max. workpiece diameter 410 mm
            Max. workpiece length 800 mm
            Max. travel X-axis 300 mm
            Max. travel Y-axis +/- 50 mm
            Max. travel Z-axis 850 mm
            Turning diameter over cross slide 250 mm
            Main spindle drive power 65 kW
            Spindle bore 75 mm
            Spindle speed of the main spindle 4000 rpm.
            Spindle speed of the counter spindle 5000 rpm.

            Equipment and accessories:
            Chip conveyor
            Coolant system with paper belt filter
            Oil mist extraction system
            Electrical control cabinet with air conditioning (tropical package)
            3-jaw power chuck on main and subspindle
            Basic equipment of tool holders
            Documentation/Manual


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CITIZEN BOLEY Evoluturn BE 42


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06177 · CNC Turning- and Milling Center

          CITIZEN BOLEY - Evoluturn BE 42 - - 2005 - MITSUBISHI

          Technical details
          turning diameter 140 mm︱turning length - mm︱control MITSUBISHI ︱spindle passage 42 mm︱total power requirement 14 kVA︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 6000 x 1800 x 2200 mm︱
          CNC lathe in very good condition. Operating hours according to the mechanical counter only 10549 hours!!! The machine can be demonstrated under power. Video: https://www.youtube.com/watch?v=S2992uq4WnQ&t=1s Equipment: CNC control MITSUBISHI C axis Driven tools Two disc turret Main and counter spindle Bar loader make LNS, model QUICK Load Servo 3, year of construction 2005 Bar length approx. 1500 mm Chip conveyor Huge accessory package with tool holders, tools, collets, etc.
            turning diameter 140 mm
            turning length - mm
            control MITSUBISHI
            spindle passage 42 mm
            total power requirement 14 kVA
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 6000 x 1800 x 2200 mm
            Description :
            CNC lathe in very good condition.
            Operating hours according to the mechanical counter only 10549 hours!!!
            The machine can be demonstrated under power.
            Video: https://www.youtube.com/watch?v=S2992uq4WnQ&t=1s


            Equipment:
            CNC control MITSUBISHI
            C axis
            Driven tools
            Two disc turret
            Main and counter spindle
            Bar loader make LNS, model QUICK Load Servo 3, year of construction 2005
            Bar length approx. 1500 mm
            Chip conveyor
            Huge accessory package with tool holders, tools, collets, etc.



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER GMX 300 linear


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2284 · CNC Turning- and Milling Center

          GILDEMEISTER - GMX 300 linear - - 2004 - SIEMENS 840 D

          Technical details
          turning diameter 640 mm︱turning length 1585 mm︱control SIEMENS 840 D ︱swing diameter 640 mm︱spindle distance 1930 mm︱slide I - cross travel (X1) 550 mm︱slide I - longitudial travel (Z1) 1585 mm︱y-travel (Y1) 220 mm︱b-axis (B1) 240° deg.︱slide II - cross travel (X2) 225 mm︱slide II - longitudial travel (Z2) 1400 mm︱Travel subspindle (Z3) 1500 mm︱spindle bore 79 mm︱main spindle speeds: 5000 1/min.︱Subspindle spindle speeds 5000 1/min.︱main drive motor (40/100% ED) 35/25 kW︱rapid traverse (X1/Y/Z1) 40/24/70 m/min︱rapid traverse (X2/Z2) 24/40 m/min︱milling head speed 12000 U/min︱milling spindle drive (40/100% ED) 22/13,2 kW︱
          First put into operation February 2005 Working hours February 2024: - Machine on: 64.333 h - Program-cycle: 41.420 h - Spindle-hours: 32.272 h * Main and subspindle, 2 x C-axis * 3-jaw power chuck RÖHM KFD-HS 250/3 for mainspindle * 3-jaw power chuck RÖHM KFD-HS 250/3 for subspindle * CNC control SIEMENS Sinumerik 840 D powerline * Turning and milling unit (HSK-A63), B-axis, Y-axis * 120-station tool changer * 12-position turret (bottom), all positions driven (10.7 kW, 4000 rpm) * Cooling unit * Coolant filter system 980 L * Chip conveyor * Oilmist extractor Optionally, a short bar loader, make Breuning ILS, passage 90 mm can be offered for € 5.500,-
            turning diameter 640 mm
            turning length 1585 mm
            control SIEMENS 840 D
            swing diameter 640 mm
            spindle distance 1930 mm
            slide I - cross travel (X1) 550 mm
            slide I - longitudial travel (Z1) 1585 mm
            y-travel (Y1) 220 mm
            b-axis (B1) 240° deg.
            slide II - cross travel (X2) 225 mm
            slide II - longitudial travel (Z2) 1400 mm
            Travel subspindle (Z3) 1500 mm
            spindle bore 79 mm
            main spindle speeds: 5000 1/min.
            Subspindle spindle speeds 5000 1/min.
            main drive motor (40/100% ED) 35/25 kW
            rapid traverse (X1/Y/Z1) 40/24/70 m/min
            rapid traverse (X2/Z2) 24/40 m/min
            milling head speed 12000 U/min
            milling spindle drive (40/100% ED) 22/13,2 kW
            Description :
            First put into operation February 2005

            Working hours February 2024:
            - Machine on: 64.333 h
            - Program-cycle: 41.420 h
            - Spindle-hours: 32.272 h

            * Main and subspindle, 2 x C-axis
            * 3-jaw power chuck RÖHM KFD-HS 250/3 for mainspindle
            * 3-jaw power chuck RÖHM KFD-HS 250/3 for subspindle
            * CNC control SIEMENS Sinumerik 840 D powerline
            * Turning and milling unit (HSK-A63), B-axis, Y-axis
            * 120-station tool changer
            * 12-position turret (bottom), all positions driven (10.7 kW, 4000 rpm)
            * Cooling unit
            * Coolant filter system 980 L
            * Chip conveyor
            * Oilmist extractor

            Optionally, a short bar loader, make Breuning ILS, passage 90 mm
            can be offered for € 5.500,-


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER TWIN 42


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2288 · CNC Turning- and Milling Center

          GILDEMEISTER - TWIN 42 - - 2002 - Siemens 840 D Powerline

          Technical details
          turning diameter 100 mm︱turning length 210 mm︱control Siemens 840 D Powerline ︱tool taper VDI 25 ︱swing diameter 145 mm︱bar material dia. 42 mm︱centre distance 580 mm︱slide I - cross travel (X1) 220 mm︱slide I - longitudial travel (Z1) 320 mm︱y-axis (Y1) +/- 30 mm︱rapid travel x/y/z 30/15/30 m/min︱slide II - cross travel (X2) 120 mm︱slide II - longitudial travel (Z2) 345 mm︱rapid traverse x + z axis 30/30 m/min︱Subspindle: Ja / yes ︱longitudinal travel (Z3) 380 mm︱vertical stroke (X3) 145 mm︱rapid traverse x + z axis 20/30 m/min︱main spindle speeds: 35 - 7000 U/min.︱Subspindle spindle speeds 35 - 7000 U/min.︱
          Equipment: CNC control Siemens 840 D Powerline. 2 x 12-station turret, all positions driven (speed 30-6000 rpm., 3,8/2,1 kW) Y axis Collection device with gripper Belt filter system Bar feeder, make Breuning/IRCO, model ILS TBL 72.12, bar length 1200 mm Counter spindle from RUN-TEC, completely overhauled Additional tailstock under the counter spindle Chip conveyor
            turning diameter 100 mm
            turning length 210 mm
            control Siemens 840 D Powerline
            tool taper VDI 25
            swing diameter 145 mm
            bar material dia. 42 mm
            centre distance 580 mm
            slide I - cross travel (X1) 220 mm
            slide I - longitudial travel (Z1) 320 mm
            y-axis (Y1) +/- 30 mm
            rapid travel x/y/z 30/15/30 m/min
            slide II - cross travel (X2) 120 mm
            slide II - longitudial travel (Z2) 345 mm
            rapid traverse x + z axis 30/30 m/min
            Subspindle: Ja / yes
            longitudinal travel (Z3) 380 mm
            vertical stroke (X3) 145 mm
            rapid traverse x + z axis 20/30 m/min
            main spindle speeds: 35 - 7000 U/min.
            Subspindle spindle speeds 35 - 7000 U/min.
            Description :
            Equipment:
            CNC control Siemens 840 D Powerline.
            2 x 12-station turret, all positions driven (speed 30-6000 rpm.,
            3,8/2,1 kW)
            Y axis
            Collection device with gripper
            Belt filter system
            Bar feeder, make Breuning/IRCO, model ILS TBL 72.12, bar length 1200 mm
            Counter spindle from RUN-TEC, completely overhauled
            Additional tailstock under the counter spindle
            Chip conveyor


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK Integrex 200 SY + GL100C


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08710 · CNC Turning- and Milling Center

          MAZAK - Integrex 200 SY + GL100C - - 2001 - MAZATROL 640 MT

          Technical details
          turning diameter 540 mm︱turning length ca. 1065 mm︱control MAZATROL 640 MT ︱total power requirement kW︱weight of the machine ca. 8,4 t︱dimensions of the machine ca. m︱
          MAZATROL 640 MT control max. turning diameter 540 mm Z-axis movements 1.065 mm Main spindle, max. speed 5.000 rpm Main spindle full C-axis Sub spindle, max. speed 6.000 rpm Y-axis +/- 80 mm Milling spindle, max. speed 6.000 rpm Full B-axis, 225° ATC 40 tools KM-63 toolholders Tooleye 1 x 3-Backenfutter, Diameter 210 mm 1 x 3-Backenfutter, Diameter 170 mm Portallader Flex GL-100C High pressure coolant, 20 bar Swarf conveyor
            turning diameter 540 mm
            turning length ca. 1065 mm
            control MAZATROL 640 MT
            weight of the machine ca. 8,4 t
            Description :
            MAZATROL 640 MT control
            max. turning diameter 540 mm
            Z-axis movements 1.065 mm
            Main spindle, max. speed 5.000 rpm
            Main spindle full C-axis
            Sub spindle, max. speed 6.000 rpm
            Y-axis +/- 80 mm
            Milling spindle, max. speed 6.000 rpm
            Full B-axis, 225°
            ATC 40 tools
            KM-63 toolholders
            Tooleye
            1 x 3-Backenfutter, Diameter 210 mm
            1 x 3-Backenfutter, Diameter 170 mm
            Portallader Flex GL-100C
            High pressure coolant, 20 bar
            Swarf conveyor


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.