High-Speed Radial Drilling Machine
Machinelist: High-Speed Radial Drilling Machine
High-Speed Radial Drilling Machine
- WMT GmbH & Co.KG
- Siemensstraße 1
- 46342 Velen-Ramsdorf
- Deutschland
-
+49 2863 92477-47
+49 2863 92477-50 -
info@w-m-t.de
www.w-m-t.de
#1108-23542 · High-Speed Radial Drilling Machine
HKS - 32 MG - - 1979 -
Technical details
Fast radials with - feed - 3 tables - Thread cutting device - Coolant system - Tool holder with tools see pictures
Rapid Radial Drilling Machine
- EnTeHa GmbH & Co.KG
- Im Wollenklingen 6
- 69517 Gorxheimertal
- Deutschland
-
+49 6201 2630 545
-
info@enteha.de
www.enteha.de
#2081-4657 · Rapid Radial Drilling Machine
DONAU - DR 28 Z - - 1987 -
Technical details
High-Speed Radial Drilling Machine MK 3 Spindle cone MK 3Speed range 45 - 2240 min-1Extension travel / drill head adjustment- Horizontal approx. 1030 mm- Vertical approx. 440 mm- Rotation approx. 315°Table height above floor 800 mmdistance spindle center / column center approx. 305 - 1335 mmDistance spindle nose / table approx. 320 - 760 mmspace requirement approx. 2 x 3 x 2,5 mweight approx. 1,5 to Tapping devicetable with 4 T-slots 18 mm / distance 125 mm 2 T-slots lateral + rear Workspace: Tisch 1200x600 (1070x500) Drive: 1,5/2,2 Control: Drill head adjustme hor. 1030 - vert.440 mm / 315°
- Feyen Maschinen GmbH
- Gelleperstr. 10
- 47809 Krefeld
- Deutschland
-
0049 (0)2151/5267-0
0049 (0)2151/5267-39 -
info@feyen.de
www.feyen.de
#1053-001801 · Rapid Radial Drilling Machine
DALMASTROJ-Jugoslawien - BRB - 3 - - 1982 -
Technical details
license fabrication WMW - Heckert,
- WeMa Antonius Pigge GmbH
- Barnstorfer Str. 3
- 49424 Goldenstedt
- Deutschland
-
+49 (0)444496700
+49 (0)4444967010 -
info@wema-pigge.de
www.wema-pigge.de
#2031-3605 · Rapid Radial Drilling Machine
WEWAG ECONOMY - GRS 30 - - 1973 -
Technical details
shift of supports: 590 mm without turntable and tools
Datasheet
Request / Contact
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-8110004 · Rapid Radial Drilling Machine
BERNARDO - SRB 40 NC - - -
Technical details
characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover
Datasheet
Request / Contact
- Intermach BV
- lange voor 71
- 8316BC Marknesse
- Niederlande
-
+31 (0)653235637
-
info@intermach.nl
www.intermach.nl
#2050-br311 · Rapid Radial Drilling Machine
BATLIBOI - BPR-50 - - -
Technical details
Brand: Batliboi Type: BPR-50 Boiler radial drilling machine Capacity: 50 mm Throat depth: 2.000 mm Spindle taper: MK5 Stroke: 350 mm Drilling Spindle: 75 mm ø Head in degrees adjustable Speed min: 16 RPM Speed max: 800 RPM Clamping surface: 2.610 x 1.050 x 260 mm Machine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mm Machine weight: 6.570 kg
Table Type Boring and Milling Machine
- Harry Vraets Machinery B.V.
- Gezellenstraat 2
- 3861RD Nijkerk
- Niederlande
-
+31 (0)332452145
-
info@vraetsmachinery.com
www.vraetsmachinery.com
#2039-12617AM · Table Type Boring and Milling Machine
PEGARD - AF9 - - unbekannt -
Technical details
- Harry Vraets Machinery B.V.
- Gezellenstraat 2
- 3861RD Nijkerk
- Niederlande
-
+31 (0)332452145
-
info@vraetsmachinery.com
www.vraetsmachinery.com
#2039-12669A · Table Type Boring and Milling Machine
TOSHIBA - BTD-110R16 - - unbekannt - TOSNUC 7-3
Technical details
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-V00154 · Table Type Boring and Milling Machine
TOS - WH 10 NC - - unbekannt - Heidenhain TNC 135
Technical details
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-20283 · Table Type Boring and Milling Machine
TOS-VARNSDORF - WHQ 13 CNC - - 2013 - Siemens 840Dsl
Technical details
equipped with: - CNC control Siemens 840Dsl & handwheel - 40-fold tool changer (ISO 50) - Siemens drives - coolant supply - Head TOS HUR 50 - Angle plate - measuring probe approx 9500h working hours
Datasheet
Request / Contact
- Leyendecker & Hollmann GmbH
- Giesenheide 18
- 40724 Hilden
- Deutschland
-
+49 (2103) 28097-0
+49 (2103) 28097-99 -
info@LHmachine.com
www.LHmachine.com
#1083-03282 · Table Type Boring and Milling Machine
PAMA - Speedmat 2 160 - - 2012 - Siemens 840 D
Technical details
Machine bed Z axis: Travel 3200 mm Feed rapid traverse 30,000 mm/min Feed rate 0.5/10000 mm/min Stand Y-axis: Travel 2500 mm Feed rapid traverse 30,000 mm/min Feed rate 0.5/10000 mm/min Head: -Work spindle diameter 160 mm -Tool holder A100 HSK W axis: -Feed rapid traverse 30,000 mm/min -Feed rate 0.5/10000 mm/min -Nominal torque of the drive 27 Nm Spindle: -Max. spindle speed 3500 rpm -Axial travel of the work spindle 800 mm -Nominal torque of the spindle drive 2396 Nm -Power spindle drive 52 kW Table X axis: -travel distance 3000 mm -Feed rapid traverse 30,000 mm/min -Feed rate 0.5/10000 mm/min Table B axis: -Table rotation 360° -Speed 5 rpm -Feed rate 0.005/5 mm/min Palette: -table size 1600x1600 mm -Load capacity 12000 kg Rack type tool magazine: -Maximum capacity tool magazine 306 -Distance between tool places 110 mm -Maximum tool diameter 105 mm Automatic head magazine - 2 positions Automatic universal head TS 20 360 S164: -Tool holder A 100 HSK -Spindle diameter 128.57 mm -Maximum spindle speed 2500 rpm -Indexing 360 positions/ 1° - Spindle support - Documentation
- Matthias Ehlers Werkzeugmaschinen
- Nikolaus-Otto-Straße 19 + 21
- 22946 Trittau
- Deutschland
-
+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14 -
anfrage@ehlers-wzm.de
www.ehlers-wzm.de
#2033-2024019 · Table Type Boring and Milling Machine
HYUNDAI - WIA KBN-135 - - 2011 - Fanuc 31i Model A
Technical details
In our opinion, the machine is in very good condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
Datasheet
Request / Contact
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-20176 · Table Type Boring and Milling Machine
HNK MACHINE TOOL CO - HB 130 - - 2009 - Fanuc 18 LMB
Technical details
equipped with - CNC control Fanuc 18 LMB - ATC 60-fold - external coolant system - rotary table 1600 x 1800mm - telescopic covers - chip conveyor
Datasheet
Request / Contact
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-20284 · Table Type Boring and Milling Machine
TOS-VARNSDORF - WHQ 13 CNC - - 2007 - Heidenhain TNC 530
Technical details
equipped with: - CNC control Heidenhain TNC 530 & handwheel - 40-fold tool changer (ISO 50) - cooling through the center of the spindle - Chip conveyor - A set of angles approx 3000h Spindle running hours
Datasheet
Request / Contact
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-03752 · Table Type Boring and Milling Machine
WM WORKS - WMG BMT 105 PTP - - 2001 -
Technical details
The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.
- AS Maschinenhandel
- Welserstr. 10e
- 51149 Köln
- Deutschland
-
+49 (0)22031864856
+49 (0)22031864857 -
mail@asmaschinenhandel.de
www.asmaschinenhandel.de
#2044-100121 · Table Type Boring and Milling Machine
TOS - WHQ - - 2000 - TNC 430 Heidenhain
Technical details
- AS Maschinenhandel
- Welserstr. 10e
- 51149 Köln
- Deutschland
-
+49 (0)22031864856
+49 (0)22031864857 -
mail@asmaschinenhandel.de
www.asmaschinenhandel.de
#2044-10018 · Table Type Boring and Milling Machine
TOS - W75 - - 1998 -
Technical details
- FLECKENSTEIN Werkzeugmaschinen GmbH
- Sommerweg 15
- 63831 Wiesen
- Deutschland
-
+49 (0) 6096 9706 0
+49 (0) 6096 9706 20 -
fleckenstein@fleckenstein-machine.com
www.fleckenstein-machine.com
#1118-16220 · Table Type Boring and Milling Machine
Castel - GREEN 1T4 - - 1997 - HEIDENHAIN TNC 430
Technical details
Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump
Datasheet
Request / Contact
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-KOT180 · Table Type Boring and Milling Machine
Femco - WBT-100SR2 - - 1995 -
Technical details
- Intermach BV
- lange voor 71
- 8316BC Marknesse
- Niederlande
-
+31 (0)653235637
-
info@intermach.nl
www.intermach.nl
#2050-kot180 · Table Type Boring and Milling Machine
FEMCO1200 - WBT-100SR2 - - 1995 -
Technical details
Brand: Femco Type: WBT-100SR2 CNC brand: Mitsubishi CNC model: Meldas C3 Year of make: 1995-05 Facing support Table length: 1.440 mm Table width: 1.600 mm Spindle diameter: 100 mm ø Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm incl. right-angle milling head type Huron
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-03004 · Table Type Boring and Milling Machine
TOS - WH 10 NC - - 1993 - Heidenhain
Technical details
- Harry Vraets Machinery B.V.
- Gezellenstraat 2
- 3861RD Nijkerk
- Niederlande
-
+31 (0)332452145
-
info@vraetsmachinery.com
www.vraetsmachinery.com
#2039-11152A · Table Type Boring and Milling Machine
TOS - WH 10 NC - - 1993 - Heidenhain TNC 135
Technical details
- Harry Vraets Machinery B.V.
- Gezellenstraat 2
- 3861RD Nijkerk
- Niederlande
-
+31 (0)332452145
-
info@vraetsmachinery.com
www.vraetsmachinery.com
#2039-12540AH · Table Type Boring and Milling Machine
WOTAN - Rapid 3 - - 1993 - Sienumeric 820 M
Technical details
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-02773 · Table Type Boring and Milling Machine
UNION - BFT 90/5 - - 1993 - Heidenhain
Technical details
TOP Manufacturer:
HKS -