Bed Type Milling Machine - Universal

x-travel 3.000 mm︱y-travel 1.000 mm︱z-travel 1.000 mm︱control iTNC 530 HEIDENHAIN︱table-size 3.230 x 1.050 mm︱table load 8,0 t︱spindle taper ISO 50 ︱tool change unit 24 Pos.︱spindle turning speed range 30 - 3.500 U/min︱drive capacity - spindle motor 25 kW︱feed stepless 1 - 5.000 mm/min︱rapid traverse 10,0 m/min︱chip conveyor Spiralförderer ︱voltage 380 V︱total power requirement 35 kVA︱weight of the machine ca. 12,0 t︱dimensions of the machine ca. 7,40 x 3,65 x 3,60 m︱hydraulic power unit 1,40 x 0,50 x 0,60 m︱ 0,45 x 0,70 x 0,85 m︱

---

- Serial No.: VH-30041 - Maschine ON 23.724 h - Spindel ON 7.968 h - CNC-Control: iTNC 530 HEIDENHAIN - Universal Milling Head (Huron-Type), manual - 2x Screw type chip conveyor at front and back of table - Oil chiller unit - Y-Axis guitde ways with new TURCITE - Ball screws and bearings in X/Y/Z axis renewed

x-travel 4000 mm︱y-travel 1200 mm︱z-travel 1500 mm︱table-size 4200x1000 mm︱workpiece weight 13000 kg︱drive capacity - spindle motor 22 kW︱spindle cone 50 ISO︱spindle turning speed range 40 - 3000 U/min︱dimensions of the machine ca. m︱weight of the machine ca. t︱CNC controller Heidenhain TNC 530 ︱ Auto-indexing UDG (2.5º) ︱ HR-410 ︱automatic tool changer fach︱chip conveyor ︱coolant system Innenkühlung:20 bar - mi ︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 2000 mm︱y-travel 800 mm︱z-travel 800 mm︱table-size 2.000 x 700 mm︱workpiece weight 3500 kg︱drive capacity - spindle motor 17 kW︱spindle cone 50 ISO︱spindle turning speed range 3000 U/min︱dimensions of the machine ca. 5265 x 3250 x 2730 m︱weight of the machine ca. 9 t︱chip conveyor ︱CNC controller HEIDENHAIN TNC-426 ︱ manuell ︱ ︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 2600 mm︱y-travel 1000 mm︱z-travel 1000 mm︱table-size 3.600 x 900 mm︱max. workpiece weight 8.000 kg︱no. of flutes 6 ︱groove width 22 mm︱flute distance 125 ︱spindle taper ISO 50 DIN 69871 ︱number of spindle speeds 4.000 (2 Steps 0 - 1.000, U/min︱feed speeds 10 - 5.000 mm/min︱rapid speed 10.000 / 10.000 / 10.000 mm/min︱dimensions of the machine ca. 9,82 x 5,1 x 3,16 m︱weight of the machine ca. 21,5 t︱Control ︱

---

Engine: Spindle drive motor: 29 kW Feed drive motor Y-axis: 20 Nm, X- and Z-axis: 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW - Tool changer

x-travel 3000 mm︱y-travel 1200 mm︱z-travel 1000 mm︱table-size 3500x1100 mm︱workpiece weight 8000 kg︱drive capacity - spindle motor 22 kW︱spindle cone 50 ISO︱spindle turning speed range 2000 U/min︱dimensions of the machine ca. 7.700 x 4.467 x 3.320 m︱weight of the machine ca. 22 t︱CNC controller Heidenhain TNC 415 ︱ 3° ︱

---

Overhauled universal milling machine Correa A30 with Heidenhain control 415 Other technical specifications and accessories, as defined in Appendix. Other special options to retrofit. Images machine in the overhaul. Warranty: 6 months on parts Take advantage of the favorable leasing and rental conditions of ABC Leasing. Ask us about it. Of course, you will get the free delivery, installation / commissioning and operational hand-over and control training. The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 2000 mm︱y-travel 800 mm︱z-travel 1500 mm︱Control Heidenhain TNC 426/430MN ︱table surface area 2200 x 750 mm︱spindle taper ISO 50 P.D.B. ︱volt 380 V︱spindle speeds: 195 - 4000 ︱total power requirement 36 HP︱dimensions of the machine ca. m︱

---

x-travel 2000 mm︱y-travel 800 mm︱z-travel 800 mm︱Control HEIDENHAIN TNC 426 ︱total power requirement kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱

---

This SACHMAN is in good condition and is available immediately.

x-travel 2500 mm︱y-travel 800 mm︱z-travel 800 mm︱control Heidenhain TNC 426 ︱table weight 3500 Kg︱table-size 2500 x 700 mm︱number of spindle speeds 50-4000 U/min/rpm︱Power 22 KW︱taper ISO 50 ︱weight of the machine ca. 10.500 kg︱dimensions of the machine ca. 6605x3315x2730 m︱

---

Control Heidenhain TNC 430CB ︱Table dimensions 9500x1200 mm︱Table load 5000/47500 kg︱Movement X-axis 9000 mm︱Movement Y-axis 1500 mm︱Movement Z-axis 1500 mm︱B-Axis travel 1x 1 °︱Spindle speed 1 50-750 1/min︱Spindle speed 2 750-3000 1/min︱Spindle taper DIN 69871/SK50 ︱Magazin capacity 60 ︱Required floor space 18830x6470 mm︱Length mm︱Depth mm︱Height 4025 mm︱Weight 61620 kg︱

---

x-travel 1400 mm︱y-travel 650 mm︱z-travel 705 mm︱table-size 1700 X 650 mm︱T-slots 4 ︱T-slot - width 18 mm︱taper ISO 50 ︱turning speeds 20-3000 U/min︱spindle motor 20 kW︱feed 2- 5000 mm/min︱rapid traverse: 11 mm/min︱table load 2500 Kg︱control HEIDENHAIN TNC-430 ︱weight of the machine ca. 7 t︱dimensions of the machine ca. 4389 x 2,7 x 2,4 m︱

---

manual milling head hydraulic tool clamping CNC CONTROL HEIDENHAIN TNC 430 VERY NICE LIKE NEW

x-travel 2000 mm︱y-travel 905 mm︱z-travel 910/760 mm︱

---

used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ram. - Repairing or grinding of the saddle. - Repairing ram. To replace the bearings and damaged elements. - Repairing of the three (3) ballscrews. - Inspection and repair of all the motors of the machine, as well as of all the electrical installation and electrical controls, included Numerical Control CNC. - The machine has been completely painted. - Repair of side casings, assembling of EC guarding. - Spindle positioning: encoder M19 - Laser interferometer

x-travel 1350 mm︱y-travel 650 mm︱z-travel 650 mm︱Control Heidenhain ︱type TNC 426 ︱milling-head swivable +/- 90 °︱spindle taper ISO 40 ︱table surface area 1600x800 mm︱chip conveyor ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

travel -x axis 2500 mm︱travel -y axis 1200 mm︱travel -z axis 1000 mm︱table length 3000 mm︱table width 1000 mm︱table load 7 t︱T-slots 7 ︱T-slot - distance 22 mm︱number of spindle speeds ca. 3000 U/min︱feeds 2 - 5000 mm/min︱rapid traverse X 8000 / Y-Z 1000 mm/min︱engine output 36 kW︱weight of the machine ca. 18 t︱dimensions of the machine ca. m︱Control HEIDENHAIN TNC 426 PB ︱

---

x-travel 2000 mm︱y-travel 1200 mm︱z-travel 1300 mm︱Control Heidenhain 426/430 ︱rotary table tiltable 360 Grad︱spindle taper SK 50 ︱

---

Head can be swiveled automatically by 90 ° in 2 axes, manually by 1 °

x-travel 4300 mm︱y-travel 1000 mm︱z-travel 1050 mm︱total power requirement kW︱weight of the machine ca. 35 t︱dimensions of the machine ca. m︱

---

Brand: ANAYAK Type: HVM-5000 Build in : 1997 CNC Control HEIDEHAIN, TNC 426 Tablesize: 5000 x 1000 mm X= 4.300 mm Y= 1.200 mm Z= 1.050 mm Toolchanger for 40 tools Tools: BT 50 CNC Controlled head 2,5 degrees Cooling trough the spindle Number of controlles axes: 4 machineweight 35.000 kg Moveable column

x-travel 6300 mm︱y-travel 1200 mm︱z-travel 2000 mm︱Control ︱total power requirement kW︱weight of the machine ca. 57 t︱dimensions of the machine ca. 7000x1300x5000 mm︱

---

Brand: Anayak Type: HVM7000 CNC brand: Heidenhain Year of make: 1997 Table length: 7.040 mm Table width: 1.000 mm X: 6.300 mm Y: 1.200 mm Z: 2.000 mm max. 3000 Rpm Machine dimensions (lxwxh): 7000 x 1300 x 5000 mm Machine weight: 57.000 kg including 6 angleplates 2500 x 700 mm this machine is in perfekt working order and can be inspected under power

Table length 7040 mm︱Table width 1000 mm︱X 6300 mm︱Y 1200 mm︱Z 2000 mm︱Control ︱

---

CNC brand: Heidenhain Year of make: 1997 Table length: 7.040 mm Table width: 1.000 mm X: 6.300 mm Y: 1.200 mm Z: 2.000 mm Machine dimensions (lxwxh): 1.300 x 7.000 x 5.000 mm Machine weight: 57.000 kg

Table length 5.000 mm︱Table width 1.000 mm︱X 4.300 mm︱Y 1.200 mm︱Z 1.050 mm︱Control Heidenhain TNC-426 ︱

---

Brand Anayak Type HVM-5000 CNC Brand Heidenhain CNC Type TNC-426 Year of make 1997 Table length 5.000 mm Table width 1.000 mm X 4.300 mm Y 1.200 mm Z 1.050 mm tool changer 40 Probes milling head B as gestuurd Huron milling head Pivot BT 50 CNC controlled milling head Index by 2,5 ° Number of axes 4 Cooling by spindle Chip conveyor Machine weight +- 35000 kg Movable column

x-travel 2000 mm︱y-travel 900 mm︱z-travel 900 mm︱table-size 2100 x 800 mm︱tool taper SK 50︱spindle speed: 30 - 3500 U/min︱control Heidenhain TNC 407 PB︱spindle motor 29/22 kW︱feed speeds 1 - 6000 mm/min︱rapid traverse 15 m/min︱total power requirement 42 kVA︱weight of the machine ca. 12.5 t︱dimensions of the machine ca. 7,7 x 5,5 x 3,0 m︱

---

x-travel 1100 mm︱y-travel 700 mm︱z-travel 500 mm︱table dimensions 1700 x 550 mm︱ 850 kg︱main spindle: ︱turning speed range - main spindle 40 - 1800 min/-1︱drive capacity - main spindle 9 kW︱tool taper ISO-50 ︱rapid traverse: ︱rapid traverse X/Y 4000 mm/min︱feed X/Y 1000 mm/min︱

---

Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. ***Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist.*** ***Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!***

x-travel 1200 mm︱y-travel 600 mm︱z-travel 600 mm︱table-size 1300 x 600 mm︱max. workpiece weight 2000 kg︱spindle taper ISO 50 ︱spindle turning speed - stepless 30 - 3500 U/min︱feeds -stepless- 1 - 6000 mm/min︱rapid traverse 10 m/min︱power capacity - milling spindle 18 kW︱max. torque on the spindle 500 Nm︱distance work spindle /surface of the table 267 - 867 mm︱distance table-vertical head 58 - 658 mm︱voltage 380 V / 50 Hz︱control voltage 230 V︱total power requirement 22 kW︱weight of the machine ca. 6,5 t︱dimensions 3,6 x 4,2 x 2,3 mm︱

---

• CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment • electr. handwheel, • vertical head manually tiltable, • coolant device,

x-travel 4000 mm︱y-travel 1000 mm︱z-travel 1000 mm︱total power requirement 22 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 10.000 x 6.000 x 4.250 m︱

---

Brand: Soraluce Type: Soramill 4 TF4 CNC brand: Heidenhain CNC model: TNC 415 B Year of make: 1995 Table length: 4.000 mm Table width: 1.000 mm X: 4.000 mm Y: 1.000 mm Z: 1.500 mm Spindle taper: ISO50 Speed: 3.000 RPM Huron milling head Motor: 22 kW Machine dimensions (lxwxh): 10.000 x 6.000 x 4.250 mm Machine weight: 25.000 kg

x-travel mm︱y-travel mm︱z-travel mm︱

---

CNC brand Heidenhain ︱CNC model TNC 415 B ︱Table length 4000 mm︱Table width 1000 mm︱X 4000 mm︱Y 1000 mm︱Z 1500 mm︱Spindle taper ISO 50 ︱Number of pallets 1 ︱Speed 3000 RPM︱Motor 22 kW︱Machine dimensions (lxwxh) 10000 x 6000 x 4250 mm︱Machine weight 25000 kg︱

---

Huron milling head