,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Bed Type Milling Machine - Vertical

          Machinelist: Bed Type Milling Machine - Vertical


          Bed Type Milling Machine - Vertical

          used Milling machines Bed Type Milling Machine - Vertical WAGNER WBE1300R


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3140034 · Bed Type Milling Machine - Vertical

          WAGNER - WBE1300R - - 2014 -

          Technical details
          x-travel 1300 mm︱y-travel 500 mm︱z-travel 570 mm︱spindle taper SK40 ︱spindle turning speed - stepless 60 - 6000 U/min︱rapid traverse x/y/z 7,5 m/min︱Number of tools 16 St.︱table surface area 1500 x 400 mm︱workpiece weight 700 kg︱total power requirement 12 kW︱weight of the machine ca. 4100 kg︱dimensions of the machine ca. 3800 x 3800 x 2800 mm︱
          - SIEMENS control SINUMERIK 828D - automatic tool clamping - Cooling device - automatic central lubrication - Chip tray - Full enclosure - Operation manual
            x-travel 1300 mm
            y-travel 500 mm
            z-travel 570 mm
            spindle taper SK40
            spindle turning speed - stepless 60 - 6000 U/min
            rapid traverse x/y/z 7,5 m/min
            Number of tools 16 St.
            table surface area 1500 x 400 mm
            workpiece weight 700 kg
            total power requirement 12 kW
            weight of the machine ca. 4100 kg
            dimensions of the machine ca. 3800 x 3800 x 2800 mm
            Description :
            - SIEMENS control SINUMERIK 828D
            - automatic tool clamping
            - Cooling device
            - automatic central lubrication
            - Chip tray
            - Full enclosure
            - Operation manual


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical KIHEUNG Point U6


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-33116 · Bed Type Milling Machine - Vertical

          KIHEUNG - Point U6 - - 2012 - Heidenhain TNC 124

          Technical details
          x-travel 1600 mm︱y-travel 710 mm︱z-travel 710 mm︱Control Heidenhain TNC 124 ︱turning speed range - main spindle 12 - 1600 min/-1︱tool taper SK50 ︱table surface area 2200 x 550 mm︱max. table load 3000 kg︱number of T-slots 5 ︱T-slot - width 20 mm︱T-slot - distance 9 mm︱rapid travel x/y/z 5 / 5 / 2,5 mm/min︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,5 x 2,80 x 2,75 m︱
          Universal bed milling machine - Huron head manual - automatic Tool clamping - Handwheel - Central lubrication - Machine light - Table enclosure - Footswitch - Documentation
            x-travel 1600 mm
            y-travel 710 mm
            z-travel 710 mm
            Control Heidenhain TNC 124
            turning speed range - main spind. 12 - 1600 min/-1
            tool taper SK50
            table surface area 2200 x 550 mm
            max. table load 3000 kg
            number of T-slots 5
            T-slot - width 20 mm
            T-slot - distance 9 mm
            rapid travel x/y/z 5 / 5 / 2,5 mm/min
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,5 x 2,80 x 2,75 m
            Description :
            Universal bed milling machine
            - Huron head manual
            - automatic Tool clamping
            - Handwheel
            - Central lubrication
            - Machine light
            - Table enclosure
            - Footswitch
            - Documentation


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical KIHEUNG Point U6


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023067 · Bed Type Milling Machine - Vertical

          KIHEUNG - Point U6 - - 2012 - Heidenhain TNC 124

          Technical details
          x-travel 1600 mm︱y-travel 720 mm︱z-travel 760 mm︱Control Heidenhain TNC 124 ︱main spindle: ︱turning speed range - main spindle 12 - 1600 min/-1︱tool taper SK50 ︱work table: ︱table surface area 2200 x 550 mm︱max. table load 3000 kg︱number of T-slots 5 ︱T-slot - width 20 mm︱T-slot - distance 80 mm︱feeds: ︱rapid travel x/y/z 5 / 5 / 2,5 mm/min︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,76 x 2,85 x 3,05 m︱
          In our opinion, the machine is in good condition and can be inspected under power by appointment. Technical features: - The machine has a universal milling head ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 1600 mm
            y-travel 720 mm
            z-travel 760 mm
            Control Heidenhain TNC 124
            turning speed range - main spind. 12 - 1600 min/-1
            tool taper SK50
            table surface area 2200 x 550 mm
            max. table load 3000 kg
            number of T-slots 5
            T-slot - width 20 mm
            T-slot - distance 80 mm
            rapid travel x/y/z 5 / 5 / 2,5 mm/min
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,76 x 2,85 x 3,05 m
            Description :
            In our opinion, the machine is in good condition and
            can be inspected under power by appointment.

            Technical features:
            - The machine has a universal milling head

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical Kao Ming 332M Multi Face


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F435 · Bed Type Milling Machine - Vertical

          Kao Ming - 332M Multi Face - - 2009 -

          Technical details
          CNC brand Fanuc ︱CNC model 18i-MB ︱Table length 3000 mm︱Table width 2600 mm︱Maximum table load 12 T︱X 3230 mm︱Y 3850 mm︱Z 1100 mm︱Spindle taper ISO 50 ︱Number of pallets 1 ︱Rapid traverse 10 m/min︱Speed 8000 RPM︱Tool changer 30 ︱Distance between columns 3200 mm︱Distance between spindle and table 1425 mm︱Along feed 5 mm/min︱Motor 22/26 kW︱Machine dimensions (lxwxh) 8130 x 7493 x 5080 mm︱Machine weight 44000 kg︱
          With chipconveyor and chip bucket Max. Table load: 12.000 kg Motor spil: 22/26 kW Tools vertical: - Length max. 350 mm - Diam. max. 130 mm ø - Max. diam with 3 places next to it occupied 200 mm ø - Max. weight 20 kg
            CNC brand Fanuc
            CNC model 18i-MB
            Table length 3000 mm
            Table width 2600 mm
            Maximum table load 12 T
            X 3230 mm
            Y 3850 mm
            Z 1100 mm
            Spindle taper ISO 50
            Number of pallets 1
            Rapid traverse 10 m/min
            Speed 8000 RPM
            Tool changer 30
            Distance between columns 3200 mm
            Distance between spindle and tab. 1425 mm
            Along feed 5 mm/min
            Motor 22/26 kW
            Machine dimensions (lxwxh) 8130 x 7493 x 5080 mm
            Machine weight 44000 kg
            Description :
            With chipconveyor and chip bucket
            Max. Table load: 12.000 kg
            Motor spil: 22/26 kW
            Tools vertical:
            - Length max. 350 mm
            - Diam. max. 130 mm ø
            - Max. diam with 3 places next to it occupied 200 mm ø
            - Max. weight 20 kg


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical Soraluce Soramill SL 5.000


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F336 · Bed Type Milling Machine - Vertical

          Soraluce - Soramill SL 5.000 - - 1995 -

          Technical details
          CNC brand Heidenhain ︱CNC model TNC 415 B ︱Table length 5000 mm︱Table width 800 mm︱Maximum table load 12,5 T︱X 3500 mm︱Y 900 mm︱Z 1000 mm︱Spindle taper ISO 50 ︱Number of pallets 1 ︱Rapid traverse 12 m/min︱Speed 2000 RPM︱Indexing per 2,5 °︱Motor 22 kW︱Power 22 kVA︱Machine dimensions (lxwxh) 7250 x 3900 x 3200 mm︱Machine weight 16500 kg︱
          Portal bed milling machine Color display Coolant treatment CNC controlled milling head Chip conveyor Milling head is 100% overhauled
            CNC brand Heidenhain
            CNC model TNC 415 B
            Table length 5000 mm
            Table width 800 mm
            Maximum table load 12,5 T
            X 3500 mm
            Y 900 mm
            Z 1000 mm
            Spindle taper ISO 50
            Number of pallets 1
            Rapid traverse 12 m/min
            Speed 2000 RPM
            Indexing per 2,5 °
            Motor 22 kW
            Power 22 kVA
            Machine dimensions (lxwxh) 7250 x 3900 x 3200 mm
            Machine weight 16500 kg
            Description :
            Portal bed milling machine
            Color display
            Coolant treatment
            CNC controlled milling head
            Chip conveyor
            Milling head is 100% overhauled


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical RAMBAUDI Rammatic 804


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4378 · Bed Type Milling Machine - Vertical

          RAMBAUDI - Rammatic 804 - - 1992 - Heidenhain iTNC 530

          Technical details
          x-travel 1500 mm︱y-travel 815 mm︱z-travel 815 mm︱Control Heidenhain iTNC 530 ︱total power requirement 4 x 11 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 8 x 4 x 4,5 m︱
          bed milling machine retrofit 2010 - good general conditionSpace requirement approx. 8 x 4 x 4.5 mWeight approx. 20 toMovie:https://www.youtube.com/watch?v=_NESVeaukAQ&t=15s Transport dimensions Basic machine approx. 6 LM x 3 x 3.50 mSwitch cabinet approx. 2.6 x 0.6 x 2.6 mHydraulics, various sheet metal parts and accessories approx. 4 LMPreis EXW 4 - milling heads / alternatively 1/2/3/4-fold applicablequill stroke 150 mmClamping table 3250 x 815 mm table load 5000 kgSpindle SK 50Speed range 40-3600 min-1 Workspace: 1500 x 815 x 815 Drive: 4 x 11 Control: Heidenhain iTNC 530
            x-travel 1500 mm
            y-travel 815 mm
            z-travel 815 mm
            Control Heidenhain iTNC 530
            total power requirement 4 x 11 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 8 x 4 x 4,5 m
            Description :
            bed milling machine

            retrofit 2010 - good general conditionSpace requirement approx. 8 x 4 x 4.5 mWeight approx. 20 toMovie:https://www.youtube.com/watch?v=_NESVeaukAQ&t=15s Transport dimensions Basic machine approx. 6 LM x 3 x 3.50 mSwitch cabinet approx. 2.6 x 0.6 x 2.6 mHydraulics, various sheet metal parts and accessories approx. 4 LMPreis EXW
            4 - milling heads / alternatively 1/2/3/4-fold applicablequill stroke 150 mmClamping table 3250 x 815 mm table load 5000 kgSpindle SK 50Speed range 40-3600 min-1
            Workspace: 1500 x 815 x 815
            Drive: 4 x 11
            Control: Heidenhain iTNC 530


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical RECKERMANN Beta 10 Kombi


          • desba TRADING
          • Im Hofgarten 6
          • 61130 Nidderau
          • Deutschland

          • +49 (0)6187 20 30 749
          • info@desba-trading.de
            www.desba-trading.de
          #2072-2134 · Bed Type Milling Machine - Vertical

          RECKERMANN - Beta 10 Kombi - - 1987 - Heidenhain TNC 155

          Technical details
          x-travel 1500 mm︱y-travel 600 mm︱z-travel 450 mm︱Control Heidenhain TNC 155 ︱total power requirement 28,4 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. m︱
            x-travel 1500 mm
            y-travel 600 mm
            z-travel 450 mm
            Control Heidenhain TNC 155
            total power requirement 28,4 kW
            weight of the machine ca. 5,5 t


        • desba TRADING
        • Im Hofgarten 6
        • 61130 Nidderau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN LFAS2000L30ke


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03431 · Bed Type Milling Machine - Vertical

          DROOP & REIN - LFAS2000L30ke - - 1986 - Fidia

          Technical details
          x-travel 3300 mm︱y-travel 2200 mm︱z-travel 1300 mm︱w-axis 350 mm︱workpiece height 1700 mm︱milling spindle diameter 140 mm︱diameter of quill 230 mm︱milling head speed 40-2000 U/min︱transmission ratio 4 ︱table surface area 4260x2000 mm︱T-slot - distance 175 mm︱T-slot - width 28 mm︱number of T-slots 11 ︱workpiece weight 300000 kg︱milling spindle motor 30 kW︱Feed 5-3000 mm/min︱control Fidia ︱total power requirement kW︱weight of the machine ca. 80 t︱dimensions of the machine ca. m︱
            x-travel 3300 mm
            y-travel 2200 mm
            z-travel 1300 mm
            w-axis 350 mm
            workpiece height 1700 mm
            milling spindle diameter 140 mm
            diameter of quill 230 mm
            milling head speed 40-2000 U/min
            transmission ratio 4
            table surface area 4260x2000 mm
            T-slot - distance 175 mm
            T-slot - width 28 mm
            number of T-slots 11
            workpiece weight 300000 kg
            milling spindle motor 30 kW
            Feed 5-3000 mm/min
            control Fidia
            weight of the machine ca. 80 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN LFAS2000Kc


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03247 · Bed Type Milling Machine - Vertical

          DROOP & REIN - LFAS2000Kc - - 1983 - Heindenhain

          Technical details
          x-travel 4000 mm︱y-travel 2000 mm︱z-travel 1300 mm︱Control Heindenhain ︱type TNC530i ︱table surface area 5200x2000 mm︱Table load 30000 kg︱pinole diameter 230 mm︱number of T-slots 11 ︱T-slot - width 28 mm︱T-slot - distance 175 mm︱spindle taper ISO 50 ︱turning speeds 40-2000 U/min︱spindle motor 30 kW︱transmission ratio 4 ︱total power requirement kW︱weight of the machine ca. 70 t︱dimensions of the machine ca. 10x5,5x5,8 m︱
          Maschine wurde überholt machine is retofit
            x-travel 4000 mm
            y-travel 2000 mm
            z-travel 1300 mm
            Control Heindenhain
            type TNC530i
            table surface area 5200x2000 mm
            Table load 30000 kg
            pinole diameter 230 mm
            number of T-slots 11
            T-slot - width 28 mm
            T-slot - distance 175 mm
            spindle taper ISO 50
            turning speeds 40-2000 U/min
            spindle motor 30 kW
            transmission ratio 4
            weight of the machine ca. 70 t
            dimensions of the machine ca. 10x5,5x5,8 m
            Description :
            Maschine wurde überholt
            machine is retofit


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN FS 130 gke


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03244 · Bed Type Milling Machine - Vertical

          DROOP & REIN - FS 130 gke - - 1971 - Heidenhain

          Technical details
          x-travel 2000 mm︱y-travel 1000 mm︱z-travel 1000 mm︱Control Heidenhain ︱type TNC 430 ︱spindle turning speed range 15-1450 U/min︱Table area 2300x1200 mm︱Spindle 200 mm︱spindle stroke 200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Nr 3762 Maschine wurde überholt machine is retofit
            x-travel 2000 mm
            y-travel 1000 mm
            z-travel 1000 mm
            Control Heidenhain
            type TNC 430
            spindle turning speed range 15-1450 U/min
            Table area 2300x1200 mm
            Spindle 200 mm
            spindle stroke 200 mm
            Description :
            Nr 3762
            Maschine wurde überholt
            machine is retofit


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used Milling machines Planer-Type Milling M/C - Double Column NAMSUN GTM


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20152 · Planer-Type Milling M/C - Double Column

          NAMSUN - GTM - - new - Heidenhain iTNC 530

          Technical details
          x-travel 31000 mm︱y-travel 4310 mm︱z-travel 1500 mm︱column daylight 4000 mm︱Main spindle: ︱turning speed range - main spindle 16000 U/min︱power capacity - main spindel 34 / 44 kW︱tool taper HSK A63 ︱c-axis +/- 360 °︱A-Axis +/- 110 °︱Distance table surface - crossbeam bottom 2570 mm︱work table: ︱table surface area 30000 x 3000 mm︱max. workpiece weight 16 t︱Tool-Presetter: ︱number of toolpositions 120 pos.︱tool taper HSK A63 ︱rapid traverse ( X / Y / Z ) 20 / 20 / 16 m/min︱control Heidenhain iTNC 530 ︱total power requirement - kVA︱
          unused 5 Axis Gantry Machining Center with moving Portal. The direct driving method using a torque motor eliminates precision problems caused by wear over time and by installing encoders on the torque motor side of the A and C axes, the actual turning angle can be accurately controlled equipped with: - CNC control Heidenhain iTNC 530 HSCI & HR 410 - fixed table: 30000 x 3000mm - 2-axis automatic head -- High speed spindle GMN HCS 230 - 16000 -- head pitch precision angle: 0.001 deg. - ATC: 120 tools (HSK A63) - Heidenhain direct linear measuring system - without coolant tank and chip conveyor
            x-travel 31000 mm
            y-travel 4310 mm
            z-travel 1500 mm
            column daylight 4000 mm
            turning speed range - main spind. 16000 U/min
            power capacity - main spindel 34 / 44 kW
            tool taper HSK A63
            c-axis +/- 360 °
            A-Axis +/- 110 °
            Distance table surface - crossbe. 2570 mm
            table surface area 30000 x 3000 mm
            max. workpiece weight 16 t
            number of toolpositions 120 pos.
            tool taper HSK A63
            rapid traverse ( X / Y / Z ) 20 / 20 / 16 m/min
            control Heidenhain iTNC 530
            total power requirement - kVA
            Description :
            unused 5 Axis Gantry Machining Center with moving Portal.
            The direct driving method using a torque motor eliminates precision problems
            caused by wear over time and by installing encoders on the torque motor side of
            the A and C axes, the actual turning angle can be accurately controlled

            equipped with:
            - CNC control Heidenhain iTNC 530 HSCI & HR 410
            - fixed table: 30000 x 3000mm
            - 2-axis automatic head
            -- High speed spindle GMN HCS 230 - 16000
            -- head pitch precision angle: 0.001 deg.
            - ATC: 120 tools (HSK A63)
            - Heidenhain direct linear measuring system
            - without coolant tank and chip conveyor


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH COBURG 17-10 FP 225


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09949 · Planer-Type Milling M/C - Double Column

          WALDRICH COBURG - 17-10 FP 225 - - 85/2003 - SIEMENS 840D

          Technical details
          x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱spindle motor 55 kW︱spindle turning speed range 5 - 2000 U/min︱spindle taper ISO 60 ︱spindle diameter in front bearing 170 mm︱table lenght 1 + 2 6400 mm︱table width 2250 mm︱daylight between the side columns 2650 mm︱table load 50 t︱no. of tools in the magazine 60 Stück︱distance spindle nose and table 2500 mm︱control SIEMENS 840D ︱feed range - table 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed in w - axe 10 - 2000 mm/min︱total power requirement 85 kW︱weight of the machine ca. 125 t︱
          Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90° indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device
            x-travel 6600 mm
            y-travel 3200 mm
            z-travel 1000 mm
            w-axis 1750 mm
            spindle motor 55 kW
            spindle turning speed range 5 - 2000 U/min
            spindle taper ISO 60
            spindle diameter in front bearin. 170 mm
            table lenght 1 + 2 6400 mm
            table width 2250 mm
            daylight between the side column. 2650 mm
            table load 50 t
            no. of tools in the magazine 60 Stück
            distance spindle nose and table 2500 mm
            control SIEMENS 840D
            feed range - table 10 - 15000 mm/min
            feeds crossrail-slide horizontal 10 - 10000 mm/min
            feed in w - axe 10 - 2000 mm/min
            total power requirement 85 kW
            weight of the machine ca. 125 t
            Description :
            Machine general overhauled and equipped with SIEMENS 840 D control in 2003

            - new digital motors, drive controllers, measuring systems and switch cabinet
            - tool changer for 60 tools (45 ISO 50, 15 ISO 60)
            - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90°
            indexing
            - hydrostatic table guideways
            - adjustable crossrail
            - 2 tables coupled
            - chip conveyor
            - coolant device


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column MAZAK Versatech V-100N / 200


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18602 · Planer-Type Milling M/C - Double Column

          MAZAK - Versatech V-100N / 200 - - 2017 - Mazatrol SmoothX

          Technical details
          x-travel 5000 mm︱y-travel 3600 mm︱z-travel 710 mm︱w-axis 1250 mm︱Main spindle: ︱turning speed range - main spindle 12000 min/-1︱power capacity - main spindel 45 kW︱tool taper HSK ︱work table: ︱table surface area 2100 x 4000 mm︱max. workpiece weight 43 t︱column daylight 2750 mm︱distance table - lower edge spindle 1880 mm︱Tool-Presetter: ︱number of toolpositions 60 pos.︱tool taper HSK ︱feeds: 8000 mm/min︱rapid traverse ( X / Y / Z ) 30/30/30 m/min︱rapid traverse W: 3 m/min︱control Mazatrol SmoothX
          Double-column, 5-Axis simultaneous Machining Center equipped with: - CNC-Control Mazatrol SmoothX - simultaneous 5 Axis Control Function - Relocation Detectro - Chip Conveyor - Hi-Pressure Coolant / Coolant through Spindle 1,5 MPA - Auto Tool Measur. & Break. detection - Scale Feedback System for x,y,z & w-axis - Work Setting Error Compensation - AAC (45kw / HSK) & ATC Tool Magazin 60-fold (HSK) - Synchronized Tapping - Auto Pecking Cycle with load detection - Spindle Shaper-Type Operation - G00 Slope Constant - Mazak Monitoring System B (RMP 600) Power-On Hours: 23.650h Auto-Run-Hours: 11.850h Auto-Cutting-Hours: 8.340h
            x-travel 5000 mm
            y-travel 3600 mm
            z-travel 710 mm
            w-axis 1250 mm
            turning speed range - main spind. 12000 min/-1
            power capacity - main spindel 45 kW
            tool taper HSK
            table surface area 2100 x 4000 mm
            max. workpiece weight 43 t
            column daylight 2750 mm
            distance table - lower edge spin. 1880 mm
            number of toolpositions 60 pos.
            tool taper HSK
            feeds: 8000 mm/min
            rapid traverse ( X / Y / Z ) 30/30/30 m/min
            rapid traverse W: 3 m/min
            control Mazatrol SmoothX
            Description :
            Double-column, 5-Axis simultaneous Machining Center equipped with:
            - CNC-Control Mazatrol SmoothX
            - simultaneous 5 Axis Control Function
            - Relocation Detectro
            - Chip Conveyor
            - Hi-Pressure Coolant / Coolant through Spindle 1,5 MPA
            - Auto Tool Measur. & Break. detection
            - Scale Feedback System for x,y,z & w-axis
            - Work Setting Error Compensation
            - AAC (45kw / HSK) & ATC Tool Magazin 60-fold (HSK)
            - Synchronized Tapping
            - Auto Pecking Cycle with load detection
            - Spindle Shaper-Type Operation
            - G00 Slope Constant
            - Mazak Monitoring System B (RMP 600)

            Power-On Hours: 23.650h
            Auto-Run-Hours: 11.850h
            Auto-Cutting-Hours: 8.340h


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column Bornemann BW 2022


          • Brandner Revalue GmbH
          • Mozartstr. 24
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 928 58 75
            +49 (0) 7309 928 58 74
          • mb@b-rv.de
            www.b-rv.de
          #2011-2401392 · Planer-Type Milling M/C - Double Column

          Bornemann - BW 2022 - - 2016 - Heidenhain iTNC530

          Technical details
          x-travel 2400 mm︱y-travel 1500 mm︱z-travel 810 mm︱Control Heidenhain iTNC530 ︱total power requirement kW︱weight of the machine ca. 7.8 t︱dimensions of the machine ca. m︱
            x-travel 2400 mm
            y-travel 1500 mm
            z-travel 810 mm
            Control Heidenhain iTNC530
            weight of the machine ca. 7.8 t


        • Brandner Revalue GmbH
        • Mozartstr. 24
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column ZIMMERMANN FZ33c


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-130 · Planer-Type Milling M/C - Double Column

          ZIMMERMANN - FZ33c - - 2015 - HEIDENHAIN iTNC530

          Technical details
          x-travel 2500 mm︱y-travel 3000 mm︱z-travel 1250 mm︱Control HEIDENHAIN iTNC530 ︱spindle turning speed range 22000 U/min︱tool change unit 50 -fach︱tool taper HSK 63 A ︱rated capacity kVA︱milling-head swivable +/- 110° ︱c-axis +-300° ︱total power requirement 130 kW︱weight of the machine ca. 60 t︱dimensions of the machine ca. 7,6 x 7,3 x 5,7 m︱
          This ZIMMERMANN FZ33c is in a very good condition as new. The machine can be viewed under power by arrangement only until week 15. be inspected. Description: Technical data of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° incl. vibration sensor incl. bearing temperature sensor incl. rotary feed-through for inner KM-feed IKZ 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15" TFT colour display Extraction system Keller Vario P1 Machine room roofing Tool changer 50-fold, chain magazine, behind the machine Chip conveyor, ejection 60° left, front side Renishaw RMP60 measuring probe Blum laser tool measurement "Control NT-Micro Clamping table Length x width x height 2500 x 3250 x 400mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged lengthwise 18H12 Distance between T-slots 250 mm Dimensions, weights Space requirement (without peripherals) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection Voltage (three-phase) 400 V Frequency 50 Hz Fuse see installation plan Power requirement see installation plan Compressed air connection (on-site) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine equipment) Linear axis drives Feed speed X-, Y-, Z-axis 60 m/min Axis acceleration X-, Y-, Z-axis up to 5 m/s² Drives rotary axes -VH30 Feed speed A-, C-axis 360 °/s Axis acceleration A-, C-axis 700 °/s² Resolution A-, C-axis 0.0001 Accuracies of linear axes - according to VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0,028 mm Z-axis P= 0,020 mm Repeat accuracy X-axis Ps= 0.015 mm Y-axis Ps= 0,016 mm Z-axis Ps= 0,010 mm Resolution of the measuring systems (interpol) A-, C- axis 0,0001°. Accuracy rotary axes -VH30 Positioning accuracy A-, C- axis P= 12" = 0,0033°. Repeat accuracy A-, C- axis Ps= 8" = 0,0022°. Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% ED) 60kW, spindle speed 22.000 min-1, 95Nm, HSK-A63 Outer dimensions fork head L x W approx. 500 x 600 mm Nominal torque rotary axes control loop A: min. 1200 Nm C: min. 1047 Nm clamped A- and C-axis: 3000 Nm (permanent grease lubrication with automatic relubrication system) Swivel axis - spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool clamping Hydraulic Permissible tool weight 4.5 kg (manufacturer's specification) Coolant supply outside and inside Coolant-lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40l/min at 20 bar Pump 2: 20l/min at 40 bar, Blowing air at the front of the milling spindle
            x-travel 2500 mm
            y-travel 3000 mm
            z-travel 1250 mm
            Control HEIDENHAIN iTNC530
            spindle turning speed range 22000 U/min
            tool change unit 50 -fach
            tool taper HSK 63 A
            milling-head swivable +/- 110°
            c-axis +-300°
            total power requirement 130 kW
            weight of the machine ca. 60 t
            dimensions of the machine ca. 7,6 x 7,3 x 5,7 m
            Description :
            This ZIMMERMANN FZ33c is in a very good condition as new.
            The machine can be viewed under power by arrangement only until week 15.
            be inspected.

            Description:
            Technical data of the machine and working ranges
            X-axis 2500 mm
            Y-axis 3000 mm
            Z-axis 1250 mm
            A-axis ± 110 °
            C-axis ± 300 °

            incl. vibration sensor
            incl. bearing temperature sensor
            incl. rotary feed-through for inner KM-feed IKZ
            5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15" TFT colour display
            Extraction system Keller Vario P1
            Machine room roofing
            Tool changer 50-fold, chain magazine, behind the machine
            Chip conveyor, ejection 60° left, front side
            Renishaw RMP60 measuring probe
            Blum laser tool measurement "Control NT-Micro

            Clamping table
            Length x width x height 2500 x 3250 x 400mm
            Table load 8000 kg/m² (max. 16000 kg)
            T-slots, arranged lengthwise 18H12
            Distance between T-slots 250 mm

            Dimensions, weights
            Space requirement (without peripherals) approx. 7600 x 7300 x 5650 mm
            Total weight approx. 53500 kg

            Electrical connection
            Voltage (three-phase) 400 V
            Frequency 50 Hz
            Fuse see installation plan
            Power requirement see installation plan

            Compressed air connection (on-site)
            Required air pressure 6 bar
            Average air consumption approx. 15 m³/h (depending on
            machine equipment)

            Linear axis drives
            Feed speed X-, Y-, Z-axis 60 m/min
            Axis acceleration X-, Y-, Z-axis up to 5 m/s²

            Drives rotary axes -VH30
            Feed speed A-, C-axis 360 °/s
            Axis acceleration A-, C-axis 700 °/s²
            Resolution A-, C-axis 0.0001

            Accuracies of linear axes - according to VDI / DGQ 3441
            Positioning accuracy X-axis P= 0.026 mm
            Y-axis P= 0,028 mm
            Z-axis P= 0,020 mm
            Repeat accuracy X-axis Ps= 0.015 mm
            Y-axis Ps= 0,016 mm
            Z-axis Ps= 0,010 mm
            Resolution of the measuring systems (interpol) A-, C- axis 0,0001°.

            Accuracy rotary axes -VH30
            Positioning accuracy A-, C- axis P= 12" = 0,0033°.
            Repeat accuracy A-, C- axis Ps= 8" = 0,0022°.

            Milling head VH30
            2-axis milling head: VH30,
            Milling spindle Siemens Weiss
            Spindle power S1 (100% ED) 60kW,
            spindle speed 22.000 min-1, 95Nm, HSK-A63
            Outer dimensions fork head L x W approx. 500 x 600 mm
            Nominal torque rotary axes control loop A: min. 1200 Nm
            C: min. 1047 Nm
            clamped A- and C-axis: 3000 Nm
            (permanent grease lubrication with automatic relubrication system)
            Swivel axis - spindle nose 326 mm
            Tool holder HSK 63 A
            Tool clamping Spring clamp
            Tool clamping Hydraulic
            Permissible tool weight 4.5 kg (manufacturer's specification)

            Coolant supply outside and inside
            Coolant-lubricant supply (emulsion) at the front of the milling spindle with
            belt filter system
            Volume 1500 l
            Pump 1: 40l/min at 20 bar
            Pump 2: 20l/min at 40 bar,
            Blowing air at the front of the milling spindle



        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column ZAYER TEBAS-5000


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-721 · Planer-Type Milling M/C - Double Column

          ZAYER - TEBAS-5000 - - 2013 - iTNC-530 HSCI

          Technical details
          x-travel 5.000 mm︱y-travel 3.750 mm︱z-travel 1.250 mm︱Control iTNC-530 HSCI ︱table-size 5.200 x 2.200 mm︱distance between columns 3.000 mm︱feeds 50.000 mm︱feeds 30.000 mm/min︱milling head 0.001º/0.001º ︱tool taper DIN 69871 AD 50 ︱number of spindle speeds 6.000 U/min/rpm︱transmission ratio 3 ︱spindle drive 43 kW︱tool change unit 20 - fach ( Vertikal) ︱Internal cooling system 20 bar︱Chip coveyor 2 ︱handwheel HEIDENHAIN HR-520 ︱total power requirement 122,89 kVA︱weight of the machine ca. 33 t︱Measuring system M&H PS 20.41
          Headstocks: Universal Auto Indexing Head 45º 0.001º/0.001º Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 6.000 rpm Speed ranges 3 Main spindle power 43 kW Direct output head reduction 1:2,29 INCLUDED Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 2.000 rpm Automatic support for automatic head change (direct exit head) in the upper side of the right column INCLUDED Automatic support for automatic head change (45º head) in the lower side of the right column INCLUDED Tool changer and magazine: Tool change Vertical Magazine positions 20 Max tool diameter with adjacent positions 125 mm. Max tool diam. with adjacent positions free 240 mm. Max tool length 300 mm. Max tool weight 25 kg. Other equipment: Internal 20 Bar and external coolant 2 longitudinal chip conveyors 1 cross chip conveyor Knoll coolant system Integral protecting guards without ceiling ICAL system for head calibration Portable handwheel Part touch probe Water gun to clean parts Lamp under the bridge
            x-travel 5.000 mm
            y-travel 3.750 mm
            z-travel 1.250 mm
            Control iTNC-530 HSCI
            table-size 5.200 x 2.200 mm
            distance between columns 3.000 mm
            feeds 50.000 mm
            feeds 30.000 mm/min
            milling head 0.001º/0.001º
            tool taper DIN 69871 AD 50
            number of spindle speeds 6.000 U/min/rpm
            transmission ratio 3
            spindle drive 43 kW
            tool change unit 20 - fach ( Vertikal)
            Internal cooling system 20 bar
            Chip coveyor 2
            handwheel HEIDENHAIN HR-520
            total power requirement 122,89 kVA
            weight of the machine ca. 33 t
            Measuring system M&H PS 20.41
            Description :
            Headstocks:
            Universal Auto Indexing Head 45º 0.001º/0.001º
            Taper DIN 69871 AD 50
            Spud ISO 7388-2 B 50
            Spindle speed 6.000 rpm
            Speed ranges 3
            Main spindle power 43 kW
            Direct output head reduction 1:2,29 INCLUDED
            Taper DIN 69871 AD 50
            Spud ISO 7388-2 B 50
            Spindle speed 2.000 rpm
            Automatic support for automatic head change (direct exit head) in the upper
            side of the right column INCLUDED
            Automatic support for automatic head change (45º head) in the lower side of the
            right column INCLUDED
            Tool changer and magazine:
            Tool change Vertical
            Magazine positions 20
            Max tool diameter with adjacent positions 125 mm.
            Max tool diam. with adjacent positions free 240 mm.
            Max tool length 300 mm.
            Max tool weight 25 kg.

            Other equipment:
            Internal 20 Bar and external coolant
            2 longitudinal chip conveyors
            1 cross chip conveyor
            Knoll coolant system
            Integral protecting guards without ceiling
            ICAL system for head calibration
            Portable handwheel
            Part touch probe
            Water gun to clean parts
            Lamp under the bridge



        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column CORREA PANTERA


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-170 · Planer-Type Milling M/C - Double Column

          CORREA - PANTERA - - 2012 - HH iTNC 530

          Technical details
          x-travel 6800 mm︱y-travel 3400 mm︱z-travel 2000 mm︱Control HH iTNC 530 ︱table dimension - longitudinal 6000 mm︱table dimension - cross 2500 mm︱table load 10 t︱tool change unit 80 Pos.︱dist. between columns - front to rear 4700 mm︱total power requirement kW︱weight of the machine ca. 80 t︱dimensions of the machine ca. 12 x 11 x 7 m︱
          This portal milling machine is in good condition and can be inspected by arrangement be inspected under power at the seller's premises. Description: - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A - 4-fold automatic head changer - 2 pieces orthogonal milling head OAD with: --> Tool holder ISO SK-50 --> Spindle speed: 20-6000 rpm --> 46kW drive power (100% ED S1) - 1 piece 2-axis fork milling head E5E (CAC II) with: --> HSK-63A tool holder --> swivelling range C-axis: +/- 200° --> swivelling range B-axis: +/- 100° --> drive power 37kW --> Spindle speed max. 24000 rpm, ***** Spindle DEFECTIVE !!! ***** 1 vertical spindle F-400 --> Spindle speed 4000 rpm --> drive power 25kW IKZ 38bar with paper belt filter 2 chip conveyors (lengthwise channelling belt conveyor 1 cross conveyor Heidenhain longitudinal measuring rods in all three axes Z-axis with 4-fold linear guide Wireless measuring probe M&H 20.41 Multi BRANKAM machine protection system CMS-100 (collision protection) Working area cover (roof) can be opened at the rear and front BLUM tool measurement Heidenhain HR 550 FS radio handwheel X and Y-axis drive via rack and 2 pinions Z-axis drive via ball screw
            x-travel 6800 mm
            y-travel 3400 mm
            z-travel 2000 mm
            Control HH iTNC 530
            table dimension - longitudinal 6000 mm
            table dimension - cross 2500 mm
            table load 10 t
            tool change unit 80 Pos.
            dist. between columns - front to. 4700 mm
            weight of the machine ca. 80 t
            dimensions of the machine ca. 12 x 11 x 7 m
            Description :
            This portal milling machine is in good condition and can be inspected by
            arrangement
            be inspected under power at the seller's premises.
            Description:
            - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A
            - 4-fold automatic head changer
            - 2 pieces orthogonal milling head OAD with:
            --> Tool holder ISO SK-50
            --> Spindle speed: 20-6000 rpm
            --> 46kW drive power (100% ED S1)
            - 1 piece 2-axis fork milling head E5E (CAC II) with:
            --> HSK-63A tool holder
            --> swivelling range C-axis: +/- 200°
            --> swivelling range B-axis: +/- 100°
            --> drive power 37kW
            --> Spindle speed max. 24000 rpm,
            ***** Spindle DEFECTIVE !!! *****
            1 vertical spindle F-400
            --> Spindle speed 4000 rpm
            --> drive power 25kW

            IKZ 38bar with paper belt filter
            2 chip conveyors (lengthwise channelling belt conveyor
            1 cross conveyor
            Heidenhain longitudinal measuring rods in all three axes
            Z-axis with 4-fold linear guide
            Wireless measuring probe M&H 20.41 Multi
            BRANKAM machine protection system CMS-100 (collision protection)
            Working area cover (roof) can be opened at the rear and front
            BLUM tool measurement
            Heidenhain HR 550 FS radio handwheel
            X and Y-axis drive via rack and 2 pinions
            Z-axis drive via ball screw


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column AWEA - CNC LP 3016 YF


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90330 · Planer-Type Milling M/C - Double Column

          AWEA - CNC - LP 3016 YF - - 2011 - Fanuc 18i MB

          Technical details
          x-travel 3000 mm︱y-travel 1600 mm︱z-travel 760 mm︱Control Fanuc 18i MB ︱column daylight 1700 mm︱table surface area 3260x1500 mm︱passage 1000 mm︱table load 10 t︱drive of main spindle 22 kW︱spindle turning speed - stepless 10-6000 U/min︱tool taper ISO 50 ︱rapid travel 20.000 mm/min︱rapid traverse Z-axis 10.000 m/min︱toolpiece magazine: chain magazine 32 Stück︱diameter of tools max. 127/215 mm︱Power connection 60 kVA︱total power requirement kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 9x4,7x4 m︱
            x-travel 3000 mm
            y-travel 1600 mm
            z-travel 760 mm
            Control Fanuc 18i MB
            column daylight 1700 mm
            table surface area 3260x1500 mm
            passage 1000 mm
            table load 10 t
            drive of main spindle 22 kW
            spindle turning speed - stepless 10-6000 U/min
            tool taper ISO 50
            rapid travel 20.000 mm/min
            rapid traverse Z-axis 10.000 m/min
            toolpiece magazine: chain magazi. 32 Stück
            diameter of tools max. 127/215 mm
            Power connection 60 kVA
            weight of the machine ca. 27 t
            dimensions of the machine ca. 9x4,7x4 m


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column CORREA FP 50-80


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-724 · Planer-Type Milling M/C - Double Column

          CORREA - FP 50-80 - - 2010 - HEIDENHAIN iTNC-530

          Technical details
          x-travel 8.000 mm︱y-travel 3.800 mm︱z-travel 1.250 mm︱Control HEIDENHAIN iTNC-530 ︱table-size 8.500 x 2.500 mm︱distance between columns 3.100 mm︱rapid travel x/y/z 10/12.000 mm/min︱feed 7.000 m/min︱milling head Automatisch Drehung ︱number of spindle speeds 4.000 U/min/rpm︱spindle drive 37 kW︱transmission ratio 2 Stufen︱table weight 35.000 Kg︱distance spindle /table 500-1.750 mm︱dimensions of the machine ca. 19.370 x 5.850 x 5.970 mm︱tool change unit 30 pos.︱max. torque on the spindle 718 Nm︱spindle taper ISO ISO 50︱handwheel ︱dimension 19.370 x 5.850 x 5.970 mm︱
          - 5 AXIS BRIDGE TYPE MILLING MACHINES Max height table to underside bridge 2.100 mm Min/max distance table to spindle 500-1.750 mm Rapid Feed (X Axis) 10.000 mm/min Rapid Feed (Y,Z Axis) 12.000 mm/min Max. Working Feed 7.000 mm/min Automatic head C5 E INCLUDED B-Axis head swivel ± 190º C Axis head rotation ± 360º Spindle taper ISO 50 Spindle speed 4.000 r.p.m. Spindle Torque 718 Nm Portable Handwheel INCLUDED Thermal growth compensation system INCLUDED
            x-travel 8.000 mm
            y-travel 3.800 mm
            z-travel 1.250 mm
            Control HEIDENHAIN iTNC-530
            table-size 8.500 x 2.500 mm
            distance between columns 3.100 mm
            rapid travel x/y/z 10/12.000 mm/min
            feed 7.000 m/min
            milling head Automatisch Drehung
            number of spindle speeds 4.000 U/min/rpm
            spindle drive 37 kW
            transmission ratio 2 Stufen
            table weight 35.000 Kg
            distance spindle /table 500-1.750 mm
            dimensions of the machine ca. 19.370 x 5.850 x 5.970 mm
            tool change unit 30 pos.
            max. torque on the spindle 718 Nm
            spindle taper ISO ISO 50
            dimension 19.370 x 5.850 x 5.970 mm
            Description :
            - 5 AXIS BRIDGE TYPE MILLING MACHINES
            Max height table to underside bridge 2.100 mm
            Min/max distance table to spindle 500-1.750 mm
            Rapid Feed (X Axis) 10.000 mm/min
            Rapid Feed (Y,Z Axis) 12.000 mm/min
            Max. Working Feed 7.000 mm/min
            Automatic head C5 E INCLUDED
            B-Axis head swivel ± 190º
            C Axis head rotation ± 360º
            Spindle taper ISO 50
            Spindle speed 4.000 r.p.m.
            Spindle Torque 718 Nm
            Portable Handwheel INCLUDED
            Thermal growth compensation system INCLUDED





        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column AWEA - CNC SP 3016


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90331 · Planer-Type Milling M/C - Double Column

          AWEA - CNC - SP 3016 - - 2006 - Fanuc 18i MB

          Technical details
          x-travel 3000 mm︱y-travel 1600 mm︱z-travel 760 mm︱Control Fanuc 18i MB ︱column daylight 1700 mm︱table surface area 3260x1500 mm︱passage 1000 mm︱table load 10 t︱drive of main spindle 22 kW︱spindle turning speed - stepless 10-6000 U/min︱tool taper ISO 50 ︱rapid travel 20.000 mm/min︱rapid traverse Z-axis 10.000 m/min︱toolpiece magazine: chain magazine 32 Stück︱diameter of tools max. 127/215 mm︱Power connection 60 kVA︱total power requirement kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 9x4,7x4 m︱
            x-travel 3000 mm
            y-travel 1600 mm
            z-travel 760 mm
            Control Fanuc 18i MB
            column daylight 1700 mm
            table surface area 3260x1500 mm
            passage 1000 mm
            table load 10 t
            drive of main spindle 22 kW
            spindle turning speed - stepless 10-6000 U/min
            tool taper ISO 50
            rapid travel 20.000 mm/min
            rapid traverse Z-axis 10.000 m/min
            toolpiece magazine: chain magazi. 32 Stück
            diameter of tools max. 127/215 mm
            Power connection 60 kVA
            weight of the machine ca. 27 t
            dimensions of the machine ca. 9x4,7x4 m


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column NICOLAS CORREA RAPID 50


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-450 · Planer-Type Milling M/C - Double Column

          NICOLAS CORREA - RAPID 50 - - 2005 - FIDIA C20

          Technical details
          x-travel 5000 mm︱y-travel 3100 mm︱z-travel 1200 mm︱Control FIDIA C20 ︱table-size 5000x2000 mm︱T-slots 11 ︱T-slot - width 22 mm︱table weight 30000 Kg︱distance between columns 2800 mm︱feed: x-20000 mm/min︱feed y,z-30000 mm/min︱spindle rate 6000 rpm︱ 32 kW︱taper ISO ISO 50 ︱Tools changer 30 fach/tools︱internal coolant system feed 20 bar︱handwheel ︱weight of the machine ca. 65 t︱dimensions of the machine ca. 15.100x6.200x6.250 mm︱
          -Automatic head UAD II -Tool clamping Hydraulic -Head 2 – Vertical mandril INCLUDED -2 longitudinal chip conveyors -1 cross chip conveyor -Laser tool presetter
            x-travel 5000 mm
            y-travel 3100 mm
            z-travel 1200 mm
            Control FIDIA C20
            table-size 5000x2000 mm
            T-slots 11
            T-slot - width 22 mm
            table weight 30000 Kg
            distance between columns 2800 mm
            feed: x-20000 mm/min
            feed y,z-30000 mm/min
            spindle rate 6000 rpm
            32 kW
            taper ISO ISO 50
            Tools changer 30 fach/tools
            internal coolant system feed 20 bar
            weight of the machine ca. 65 t
            dimensions of the machine ca. 15.100x6.200x6.250 mm
            Description :
            -Automatic head UAD II
            -Tool clamping Hydraulic
            -Head 2 – Vertical mandril INCLUDED
            -2 longitudinal chip conveyors
            -1 cross chip conveyor
            -Laser tool presetter


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH-COBURG Valutec


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-151 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - Valutec - - 2005 - SIEMENS 840D

          Technical details
          x-travel 6000 mm︱y-travel 3500 mm︱z-travel 1500 mm︱Control SIEMENS 840D ︱table load 12 t︱height over floor 6300 mm︱table dimension - longitudinal 5000 mm︱table dimension - cross 2500 mm︱no. of tables 2 ︱tool change unit 200 -fach︱weight of tools max. 30 kg︱tool taper HSK A 100 ︱diameter of tools max. 250 mm︱workpiece length 500 mm︱spindle turning speed range 5-6000 U/min︱c-axis -10 bis 370 °︱b-axis 5 bis -95 °︱column daylight 3000 mm︱distance spindle nose and table 1500 mm︱total power requirement kW︱
            x-travel 6000 mm
            y-travel 3500 mm
            z-travel 1500 mm
            Control SIEMENS 840D
            table load 12 t
            height over floor 6300 mm
            table dimension - longitudinal 5000 mm
            table dimension - cross 2500 mm
            no. of tables 2
            tool change unit 200 -fach
            weight of tools max. 30 kg
            tool taper HSK A 100
            diameter of tools max. 250 mm
            workpiece length 500 mm
            spindle turning speed range 5-6000 U/min
            c-axis -10 bis 370 °
            b-axis 5 bis -95 °
            column daylight 3000 mm
            distance spindle nose and table 1500 mm


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column HARTFORD HB 3190 A


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90333 · Planer-Type Milling M/C - Double Column

          HARTFORD - HB 3190 A - - 2004 - Fanuc 18 M

          Technical details
          x-travel 3000 mm︱y-travel 1970 mm︱z-travel 920 mm︱Control Fanuc 18 M ︱column daylight 2200 mm︱tool taper 50 ︱spindle turning speed - stepless 40-4.000 U/min︱table-size 3100x1830 mm︱toolpiece magazine: chain magazine 40 Stück︱drive of main spindle 22 kW︱total power requirement kW︱weight of the machine ca. 32 t︱dimensions of the machine ca. 9,7x6x4,7 m︱
            x-travel 3000 mm
            y-travel 1970 mm
            z-travel 920 mm
            Control Fanuc 18 M
            column daylight 2200 mm
            tool taper 50
            spindle turning speed - stepless 40-4.000 U/min
            table-size 3100x1830 mm
            toolpiece magazine: chain magazi. 40 Stück
            drive of main spindle 22 kW
            weight of the machine ca. 32 t
            dimensions of the machine ca. 9,7x6x4,7 m


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column CORREA rapid 5


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1110051 · Planer-Type Milling M/C - Double Column

          CORREA - rapid 5 - - 2004 -

          Technical details
          x-travel 5000 mm︱y-travel 3100 mm︱z-travel 1200 mm︱Control ︱total power requirement 20/27 kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 15x6,2x6 m︱
          Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd
            x-travel 5000 mm
            y-travel 3100 mm
            z-travel 1200 mm
            total power requirement 20/27 kW
            weight of the machine ca. 65 t
            dimensions of the machine ca. 15x6,2x6 m
            Description :
            Stock number 1110051
            Machine type CNC Portal milling machine
            Make CORREA
            Rapid type 50
            Year of manufacture 2004
            Control type HEIDENHAIN
            Table size (mm) 5000 x 2000 mm
            X out (mm) 5000 mm
            Y-off (mm) 3100 mm
            Z-off (mm) 1200 mm
            Table load Max 15 ton
            Speed (RPM) Max 18,000
            Tool holder HSK 63
            Gesamtleistung(kW) 20/27
            Length (mm) 15000
            Width (mm) 6200
            Height (mm) 6000
            Weight 65 ton


            Additional information

            Tool changer for 24 tools
            5-axis gesteuerd


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •