,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Machining centre

          Machinelist: Machining centre


          Machining centre

          used Milling machines Machining centre KEMT MT52D


          • Glaub Werkzeugmaschinen GmbH
          • Industriestraße 36
          • 74194 Neuenstadt am Kocher
          • Deutschland

          • +49 (0) 7139 9366 744
            +49 (0) 7139 9365 794
          • service@gwg-maschinen.com
            www.gwg-maschinen.com
          #2029-1181 · Machining centre

          KEMT - MT52D - - 2021 - Mitsubishi/ Siemens

          Technical details
          Control Mitsubishi/ Siemens ︱x-axis 520 mm︱y-axis 400 mm︱z-axis 300 mm︱max. table loading capacity 300 kg︱weight 3500 kg︱dimensions of the machine ca. 1650x2421 m︱
            Control Mitsubishi/ Siemens
            x-axis 520 mm
            y-axis 400 mm
            z-axis 300 mm
            max. table loading capacity 300 kg
            weight 3500 kg
            dimensions of the machine ca. 1650x2421 m


        • Glaub Werkzeugmaschinen GmbH
        • Industriestraße 36
        • 74194 Neuenstadt am Kocher
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Machining centre HWACHEON VESTA 1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7194 · Machining centre

          HWACHEON - VESTA 1000 - - 2016 -

          Technical details
          x-travel 1000 mm︱y-travel 550 mm︱z-travel 500 mm︱control Siemens828D ︱rapid speed 36/36/30 m/min︱feed speeds 24000 mm/min︱table surface area 1100 x 502 mm︱turning speed range 12000 U/min︱no. of tools in the magazine 24 Stück︱tool taper BT 40 ︱weight of the machine ca. 6,5 t︱
          - Commissioning: January 2017! - with Siemens828D including Shopmill - Flat top chip conveyor - Spindle with 12,000 rpm, SK 40 - Internal coolant supply up to 30 bar - Tool magazine with 24 places
            x-travel 1000 mm
            y-travel 550 mm
            z-travel 500 mm
            control Siemens828D
            rapid speed 36/36/30 m/min
            feed speeds 24000 mm/min
            table surface area 1100 x 502 mm
            turning speed range 12000 U/min
            no. of tools in the magazine 24 Stück
            tool taper BT 40
            weight of the machine ca. 6,5 t
            Description :
            - Commissioning: January 2017!
            - with Siemens828D including Shopmill
            - Flat top chip conveyor
            - Spindle with 12,000 rpm, SK 40
            - Internal coolant supply up to 30 bar
            - Tool magazine with 24 places


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Machining centre AWEA FV 960


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-666 · Machining centre

          AWEA - FV 960 - - 2015 - HEIDENHAIN iTNC 530

          Technical details
          travel 960 mm︱length 600 mm︱width 480 mm︱Control HEIDENHAIN iTNC 530 ︱Machine on 9000 ︱Spindle hours 3500 ︱Chip coveyor inkl. ︱handwheel el. ︱round table D 350 ︱table weight 200 Kg︱number of spindle speeds 12000 U/min/rpm︱spindle drive 14/10 kW︱rapid traverse 32/32/24 m/min︱ 30 fach︱spindle taper ISO BT 40 ︱dimensions of the machine ca. 3,1 x 2,3 x 3,1 m︱total power requirement 45 kW︱weight of the machine ca. 7,4 t︱
            travel 960 mm
            length 600 mm
            width 480 mm
            Control HEIDENHAIN iTNC 530
            Machine on 9000
            Spindle hours 3500
            Chip coveyor inkl.
            handwheel el.
            round table D 350
            table weight 200 Kg
            number of spindle speeds 12000 U/min/rpm
            spindle drive 14/10 kW
            rapid traverse 32/32/24 m/min
            30 fach
            spindle taper ISO BT 40
            dimensions of the machine ca. 3,1 x 2,3 x 3,1 m
            total power requirement 45 kW
            weight of the machine ca. 7,4 t


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Machining centre OKK VP1200


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-F587 · Machining centre

          OKK - VP1200 - - 2004 - Fanuc

          Technical details
          travel 1600 mm︱length 1600 mm︱width 1200 mm︱spindle head according to ︱spindle turning speed range 100-12000 U/min︱switching steps ︱feeding velocity x-Axis min./max. mm︱y-Axis min./max. mm︱Control Fanuc
          Brand: OKK Type: VP1200 CNC brand: Fanuc CNC model: 160is-MB Year of make: 2004 Table length: 1.600 mm Table width: 1.300 mm X: 1.600 mm Y: 1.300 mm Z: 550 mm Throat depth: 560 mm Tools: BT40 Tool changer: 40 Minimum speed: 100 RPM Maximum speed: 12.000 RPM Max. workpiece diameter: 82 mm ø Maximum table load: 2.000 kg For additional information, please refer to the pdf file Machine dimensions: 5.800 x 3.200 x 2.800 mm Machine weight: 16.000 kg
            travel 1600 mm
            length 1600 mm
            width 1200 mm
            spindle turning speed range 100-12000 U/min
            Control Fanuc
            Description :
            Brand: OKK
            Type: VP1200
            CNC brand: Fanuc
            CNC model: 160is-MB
            Year of make: 2004
            Table length: 1.600 mm
            Table width: 1.300 mm
            X: 1.600 mm
            Y: 1.300 mm
            Z: 550 mm
            Throat depth: 560 mm
            Tools: BT40
            Tool changer: 40
            Minimum speed: 100 RPM
            Maximum speed: 12.000 RPM
            Max. workpiece diameter: 82 mm ø
            Maximum table load: 2.000 kg
            For additional information, please refer to the pdf file
            Machine dimensions: 5.800 x 3.200 x 2.800 mm
            Machine weight: 16.000 kg


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Machining centre DECKEL MAHO DMC 50 H


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10083 · Machining centre

          DECKEL MAHO - DMC 50 H - - 2001 - Sinumerik 840 D

          Technical details
          travel 0 mm︱length 0 mm︱width 0 mm︱spindle head according to ︱spindle turning speed range U/min︱switching steps ︱feeding velocity x-Axis min./max. mm︱y-Axis min./max. mm︱Control Sinumerik 840 D ︱X- + Z-axis kW︱y-travel 560 mm︱z-travel 510 mm︱x-travel 560 mm︱tool taper SK 40 ︱weight of the machine ca. 8 t︱
            Control Sinumerik 840 D
            y-travel 560 mm
            z-travel 510 mm
            x-travel 560 mm
            tool taper SK 40
            weight of the machine ca. 8 t


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Machining centre HEDELIUS - Vertikal CB 70


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3140032 · Machining centre

          HEDELIUS - Vertikal - CB 70 - - 2001 -

          Technical details
          x-travel 2100 mm︱y-travel 720 mm︱z-travel 600 mm︱spindle taper SK 40 ︱turning speeds 30 - 8000 U/min︱no. of workpieces in the magazine 30 Stück︱table surface area 2800 x 650 mm︱table load 2500 kg︱table height over floor 900 mm︱rapid travel x/y/z 30 m/min︱feed speeds X/Y/Z 0 / 30000 mm/min︱total power requirement 25 kW︱weight of the machine ca. 12000 kg︱dimensions of the machine ca. 5500 x 3400 x 3100 mm︱
          CNC traveling column machining center Hedelius Furnishing: - HEIDENHAIN control TNC426 - chip conveyor - Coolant system 350 / 2.5 bar - Working area hood Machining values: - max. milling capacity: 600cm³/min - max. drilling Ø: 44 mm - max. thread Ø: M30 operating hours: - control on = 68283 hours - machine on = 67782 hours - program run = 20891 hours
            x-travel 2100 mm
            y-travel 720 mm
            z-travel 600 mm
            spindle taper SK 40
            turning speeds 30 - 8000 U/min
            no. of workpieces in the magazin. 30 Stück
            table surface area 2800 x 650 mm
            table load 2500 kg
            table height over floor 900 mm
            rapid travel x/y/z 30 m/min
            feed speeds X/Y/Z 0 / 30000 mm/min
            total power requirement 25 kW
            weight of the machine ca. 12000 kg
            dimensions of the machine ca. 5500 x 3400 x 3100 mm
            Description :
            CNC traveling column machining center Hedelius

            Furnishing:
            - HEIDENHAIN control TNC426
            - chip conveyor
            - Coolant system 350 / 2.5 bar
            - Working area hood

            Machining values:
            - max. milling capacity: 600cm³/min
            - max. drilling Ø: 44 mm
            - max. thread Ø: M30

            operating hours:
            - control on = 68283 hours
            - machine on = 67782 hours
            - program run = 20891 hours


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Machining centre ELUMATEC Stabbearbeitung SBZ 130/01


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3500061 · Machining centre

          ELUMATEC Stabbearbeitung - SBZ 130/01 - - 1999 -

          Technical details
          x-axis 6450 mm︱y-axis 400 mm︱z-axis 380 mm︱working lenght 6500 mm︱Number of tools 8 St.︱tool taper BT30 ︱tool changing time 1,2 sec︱diameter of tools max. 80 mm︱turning speeds 6000 U/min︱Feed speed X = 34 m/min.︱Feed speed Y+Z = 18 m/min.︱total power requirement 8,5 kW︱dimensions 9800 x 3000 x 2400/3300 mm︱weight 5400 kg︱
          *Bar machining center, 3-axis machining of aluminum, plastic, steel and stainless steel profiles*
            x-axis 6450 mm
            y-axis 400 mm
            z-axis 380 mm
            working lenght 6500 mm
            Number of tools 8 St.
            tool taper BT30
            tool changing time 1,2 sec
            diameter of tools max. 80 mm
            turning speeds 6000 U/min
            Feed speed X = 34 m/min.
            Feed speed Y+Z = 18 m/min.
            total power requirement 8,5 kW
            dimensions 9800 x 3000 x 2400/3300 mm
            weight 5400 kg
            Description :
            *Bar machining center, 3-axis machining of aluminum, plastic, steel
            and stainless steel profiles*


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Machining centre AXA VC2


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03421 · Machining centre

          AXA - VC2 - - 1992 - Heidenhain

          Technical details
          x-travel 2000 mm︱y-travel 500 mm︱z-travel 480 mm︱control Heidenhain ︱type TNC 407︱spindle taper ISO 40 ︱spindle turning speed range 6000 U/min︱feed 15 m/min︱Tool changer 40 ︱Cooling through the spindle 10 bar︱chip conveyor elekt. ︱indexing device - swivable CNC ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 2000 mm
            y-travel 500 mm
            z-travel 480 mm
            control Heidenhain
            type TNC 407
            spindle taper ISO 40
            spindle turning speed range 6000 U/min
            feed 15 m/min
            Tool changer 40
            Cooling through the spindle 10 bar
            elekt.
            indexing device - swivable CNC


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact

          milling machining centers - universal

          used Milling machines milling machining centers - universal Romi D800


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F638 · milling machining centers - universal

          Romi - D800 - - 2018 -

          Technical details
          CNC brand Siemens ︱CNC model Sinumerik 828D ︱Table length 914 mm︱Table width 500 mm︱X 800 mm︱Y 530 mm︱Z 580 mm︱Spindle taper BT40 ︱Tool changer 30 ︱Minimum speed 8 RPM︱Maximum speed 8.000 RPM︱Maximum palletload 1300 kg︱Power 17 kW︱Machine dimensions 3.100 x 2.300 x 2.550 mm︱Machine weight 5.500 kg︱
          Brand Romi Machine no F638 Type D800 CNC Brand Siemens CNC Type Sinumerik 828D Year of make 2018 Table length 914 mm Table width 500 mm X 800 mm Y 530 mm Z 580 mm Spindle taper BT40 Speed minimum 8 RPM Speed maximum 8.000 RPM Engine power 17 kW Machine size 3.100 x 2.300 x 2.550 mm Machine weight 5.500 kg Tool magazine positions: 30
            CNC brand Siemens
            CNC model Sinumerik 828D
            Table length 914 mm
            Table width 500 mm
            X 800 mm
            Y 530 mm
            Z 580 mm
            Spindle taper BT40
            Tool changer 30
            Minimum speed 8 RPM
            Maximum speed 8.000 RPM
            Maximum palletload 1300 kg
            Power 17 kW
            Machine dimensions 3.100 x 2.300 x 2.550 mm
            Machine weight 5.500 kg
            Description :
            Brand Romi
            Machine no F638
            Type D800
            CNC Brand Siemens
            CNC Type Sinumerik 828D
            Year of make 2018
            Table length 914 mm
            Table width 500 mm
            X 800 mm
            Y 530 mm
            Z 580 mm
            Spindle taper BT40
            Speed minimum 8 RPM
            Speed maximum 8.000 RPM
            Engine power 17 kW
            Machine size 3.100 x 2.300 x 2.550 mm
            Machine weight 5.500 kg
            Tool magazine positions: 30


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal AWEA FV-960


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-1030270 · milling machining centers - universal

          AWEA - FV-960 - - 2015 - HEIDENHAIN

          Technical details
          x-travel 960 mm︱y-travel 600 mm︱z-travel 480 mm︱ 120 / - 42 °︱ 360 °︱table load 200 kg︱Table dimensions 560x365 mm︱Spindle Speed 12000 U/min.︱conus taper BBT 40 mm︱distance spindle /table 100-580 mm︱tool length - max. 300 mm︱weight of tools max. 7 kg︱control HEIDENHAIN ︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. 3100x2200x3070 mm︱
            x-travel 960 mm
            y-travel 600 mm
            z-travel 480 mm
            120 / - 42 °
            360 °
            table load 200 kg
            Table dimensions 560x365 mm
            Spindle Speed 12000 U/min.
            conus taper BBT 40 mm
            distance spindle /table 100-580 mm
            tool length - max. 300 mm
            weight of tools max. 7 kg
            control HEIDENHAIN
            weight of the machine ca. 7000 kg
            dimensions of the machine ca. 3100x2200x3070 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal AKIRA SEIKI RMV 250 RT


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03925 · milling machining centers - universal

          AKIRA SEIKI - RMV 250 RT - - 2014 -

          Technical details
          x-travel 500 mm︱y-travel 250 mm︱z-travel 400 mm︱table-size RUNDTISCH 250 mm︱spindle taper ISO HSK 63 ︱spindle turning speed range 45 - 12000 U/min︱spindle drive motor 11 kW︱tool change unit 24 ︱CNC-control FANUC OIMD ︱voltage 380 V︱max. table load 200 kg︱throat 380 mm︱coolant ︱total power requirement 17 kVA︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3.5x 2.5x 2,60 m︱
          AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment NTROUGHT THE SPINDEL 20 BARS CHIP CONVOYER 5 AXIS MACHINE IN GOOD CONDITION
            x-travel 500 mm
            y-travel 250 mm
            z-travel 400 mm
            table-size RUNDTISCH 250 mm
            spindle taper ISO HSK 63
            spindle turning speed range 45 - 12000 U/min
            spindle drive motor 11 kW
            tool change unit 24
            CNC-control FANUC OIMD
            voltage 380 V
            max. table load 200 kg
            throat 380 mm
            total power requirement 17 kVA
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3.5x 2.5x 2,60 m
            Description :
            AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014
            - coolant equipment NTROUGHT THE SPINDEL 20 BARS
            CHIP CONVOYER
            5 AXIS MACHINE
            IN GOOD CONDITION


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal EMCO MaxxMill 500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-131 · milling machining centers - universal

          EMCO - MaxxMill 500 - - 2014 - SIEMENS 840D

          Technical details
          x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱B-axis (table) +-100 °︱c-axis 360 °︱spindle turning speed range 0 - 15000 U/min︱tool taper ISO SK-40 ︱workpiece weight 250 kg︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱
          This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 built in 2014: Machine hours 20,939 h Spindle hours 6,731 h Operating hours (machining) 5,042 h
            x-travel 750 mm
            y-travel 550 mm
            z-travel 500 mm
            Control SIEMENS 840D
            B-axis (table) +-100 °
            c-axis 360 °
            spindle turning speed range 0 - 15000 U/min
            tool taper ISO SK-40
            workpiece weight 250 kg
            tool change unit 30 -fach
            rapid traverse 30 m/min
            table dimension - longitudinal 600 mm
            table dimension - cross 600 mm
            total power requirement 26,4 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3,5 x 2,45 x 2,8 m
            Description :
            This EMCO MaxxMill 500 machining centre is in good condition.
            can be inspected at any time by arrangement under chip at the seller.

            Emco Maxxmill500 built in 2014:
            Machine hours 20,939 h
            Spindle hours 6,731 h
            Operating hours (machining) 5,042 h


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal C-Tek KM-150D


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F654 · milling machining centers - universal

          C-Tek - KM-150D - - 2014 -

          Technical details
          CNC brand C-Tek ︱CNC model CNT Series ︱Table length 1.600 mm︱Table width 450 mm︱X 1.500 mm︱Y 650 mm︱Z 620 mm︱Spindle taper ISO40 ︱Tool changer 24 ︱Maximum speed 6.000 RPM︱Machine dimensions 3.000 x 2.800 x 2.600 mm︱Machine weight 5.000 kg︱
          Brand C-Tek Machine no F654 Type KM-150D CNC Brand C-Tek CNC Type CNT Series Year of make 2014 Table length 1.600 mm Table width 450 mm X 1.500 mm Y 650 mm Z 620 mm Spindle taper ISO40 Speed maximum 6.000 RPM Maximum table load 1.000 kg Machine size 3.000 x 2.800 x 2.600 mm Machine weight 5.000 kg Tool magazine positions: 24
            CNC brand C-Tek
            CNC model CNT Series
            Table length 1.600 mm
            Table width 450 mm
            X 1.500 mm
            Y 650 mm
            Z 620 mm
            Spindle taper ISO40
            Tool changer 24
            Maximum speed 6.000 RPM
            Machine dimensions 3.000 x 2.800 x 2.600 mm
            Machine weight 5.000 kg
            Description :
            Brand C-Tek
            Machine no F654
            Type KM-150D
            CNC Brand C-Tek
            CNC Type CNT Series
            Year of make 2014
            Table length 1.600 mm
            Table width 450 mm
            X 1.500 mm
            Y 650 mm
            Z 620 mm
            Spindle taper ISO40
            Speed maximum 6.000 RPM
            Maximum table load 1.000 kg
            Machine size 3.000 x 2.800 x 2.600 mm
            Machine weight 5.000 kg

            Tool magazine positions: 24


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal EMCO MaxxMill 500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-132 · milling machining centers - universal

          EMCO - MaxxMill 500 - - 2012 - SIEMENS 840D

          Technical details
          x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱tool taper ISO SK-40 ︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table - swivable +/- 100 °︱table rotating 360 °︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱workpiece weight 250 kg︱spindle turning speed range 0-15000 U/min︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱
          This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 Bj. 2012: Maschinenstunden 19.125 h Spindelstunden 4.954 h Betriebsstunden (zerspanen) 3.483 h
            x-travel 750 mm
            y-travel 550 mm
            z-travel 500 mm
            Control SIEMENS 840D
            tool taper ISO SK-40
            tool change unit 30 -fach
            rapid traverse 30 m/min
            table - swivable +/- 100 °
            table rotating 360 °
            table dimension - longitudinal 600 mm
            table dimension - cross 600 mm
            workpiece weight 250 kg
            spindle turning speed range 0-15000 U/min
            total power requirement 26,4 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3,5 x 2,45 x 2,8 m
            Description :
            This EMCO MaxxMill 500 machining centre is in good condition.
            can be inspected at any time by arrangement under chip at the seller.

            Emco Maxxmill500 Bj. 2012:
            Maschinenstunden 19.125 h
            Spindelstunden 4.954 h
            Betriebsstunden (zerspanen) 3.483 h


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal KONDIA Five 400


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-999 · milling machining centers - universal

          KONDIA - Five 400 - - 2011 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 850 mm︱y-travel 500 mm︱z-travel 610 mm︱Control HEIDENHAIN iTNC 530 ︱handwheel inkl ︱Chip coveyor inkl ︱Internal cooling system 40 bar︱Turn table D 400 mm︱number of spindle speeds 12.000 U/min/rpm︱spindle drive 17/10 kW︱Tools changer 40 fach/tools︱spindle taper ISO SK40 ︱total power requirement 28,5 kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. 3 x 2.70 x 3,2 m︱
          5-axis simultaneous universal machining center NC rotary swivel table D 400mm 3D infrared probe blown air through spindle flush gun direct measurement system
            x-travel 850 mm
            y-travel 500 mm
            z-travel 610 mm
            Control HEIDENHAIN iTNC 530
            handwheel inkl
            Chip coveyor inkl
            Internal cooling system 40 bar
            Turn table D 400 mm
            number of spindle speeds 12.000 U/min/rpm
            spindle drive 17/10 kW
            Tools changer 40 fach/tools
            spindle taper ISO SK40
            total power requirement 28,5 kW
            weight of the machine ca. 7,7 t
            dimensions of the machine ca. 3 x 2.70 x 3,2 m
            Description :
            5-axis simultaneous universal machining center
            NC rotary swivel table D 400mm
            3D infrared probe
            blown air through spindle
            flush gun
            direct measurement system


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal GROB G 350 AB11K


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19469 · milling machining centers - universal

          GROB - G 350 AB11K - - 2011 - Heidenhain iTMC 530

          Technical details
          x-travel 600 mm︱y-travel 855 mm︱z-travel 750 mm︱clearance diameter 720 mm︱table surface area 400 x 400 mm︱table rotation speed 50 U/min︱pivoting angle -185 / +45 Grad︱workpiece weight 340 kg︱tool taper HSK-A 63 ︱spindle turning speed - stepless 12000 U/min︱spindle motor 40 kW︱tool diameter 70 mm︱tool length - max. 365 mm︱weight of tools max. 8 kg︱rapid travel range 70/45/90 m/min︱control Heidenhain iTMC 530 ︱total power requirement 54 kVA︱weight of the machine ca. 15 t︱dimensions of the machine ca. 6,1 x 2,47 x 3,17 m︱
          The 5-axis universal machining center G350 offers nearly unlimited possibilities in the milling of workpieces of various materials. materials. equipped with: - CNC control Heidenhain iTNC 530 - 2-fold Pallet Changer - NC swivel rotary table (A-/B-axis) - tool changer 40 places (HSK A63) - IKZ / coolant system 3-22,5bar - chip conveyor
            x-travel 600 mm
            y-travel 855 mm
            z-travel 750 mm
            clearance diameter 720 mm
            table surface area 400 x 400 mm
            table rotation speed 50 U/min
            pivoting angle -185 / +45 Grad
            workpiece weight 340 kg
            tool taper HSK-A 63
            spindle turning speed - stepless 12000 U/min
            spindle motor 40 kW
            tool diameter 70 mm
            tool length - max. 365 mm
            weight of tools max. 8 kg
            rapid travel range 70/45/90 m/min
            control Heidenhain iTMC 530
            total power requirement 54 kVA
            weight of the machine ca. 15 t
            dimensions of the machine ca. 6,1 x 2,47 x 3,17 m
            Description :
            The 5-axis universal machining center G350 offers nearly unlimited
            possibilities in the milling of workpieces of various materials.
            materials.
            equipped with:
            - CNC control Heidenhain iTNC 530
            - 2-fold Pallet Changer
            - NC swivel rotary table (A-/B-axis)
            - tool changer 40 places (HSK A63)
            - IKZ / coolant system 3-22,5bar
            - chip conveyor



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal MATSUURA MAM72-25V PC2


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4726 · milling machining centers - universal

          MATSUURA - MAM72-25V PC2 - - 2011 -

          Technical details
          x-travel 550 mm︱y-travel 410 mm︱z-travel 450 mm︱b-axis +110/-110 °︱spindle turning speed range -15000 U/min︱spindle taper BT Big Plus 40 ︱tool change unit 40x ︱size of pallet 2x D-250 mm︱weight of the machine ca. 8.6 t︱
          5 axes machining center FANUC G-Tech 30i Coolant through spindle 3D measuring probe Tool measuring device Misc pallets Misc tool holders More details on www.marcels-maschinen.ch
            x-travel 550 mm
            y-travel 410 mm
            z-travel 450 mm
            b-axis +110/-110 °
            spindle turning speed range -15000 U/min
            spindle taper BT Big Plus 40
            tool change unit 40x
            size of pallet 2x D-250 mm
            weight of the machine ca. 8.6 t
            Description :
            5 axes machining center

            FANUC G-Tech 30i

            Coolant through spindle
            3D measuring probe
            Tool measuring device
            Misc pallets
            Misc tool holders

            More details on www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal SW-SCHWäBISCHE WERKZEUGMASCH. BA 400


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202255 · milling machining centers - universal

          SW-SCHWäBISCHE WERKZEUGMASCH. - BA 400 - - 2010 - Siemens 840D

          Technical details
          x-travel 400 mm︱y-travel 400 mm︱z-travel 400 mm︱Control Siemens 840D ︱Number of boring spindles 2 St.︱spindle distance 400 mm︱spindle turning speed range 50 - 10000 U/min︱spindle drive 18 kW︱Number of working hours ca. 63015 h︱spindle hours ca. 32870 h︱ ︱no. of tables 1 ︱no. of clamping positions 4 ︱max. workpiece weight 450 kg︱tool magazin: ︱number of tool places 60 (120) Pos.︱tool taper HSK A63 ︱max. tool diameter 70 mm︱max. tool length 300 mm︱max. tool weight 10 kg︱
          In our opinion, the machine is in very good used condition and can be inspected under power by appointment. - There are 2 identical machines available ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.***
            x-travel 400 mm
            y-travel 400 mm
            z-travel 400 mm
            Control Siemens 840D
            Number of boring spindles 2 St.
            spindle distance 400 mm
            spindle turning speed range 50 - 10000 U/min
            spindle drive 18 kW
            Number of working hours ca. 63015 h
            spindle hours ca. 32870 h
            no. of tables 1
            no. of clamping positions 4
            max. workpiece weight 450 kg
            number of tool places 60 (120) Pos.
            tool taper HSK A63
            max. tool diameter 70 mm
            max. tool length 300 mm
            max. tool weight 10 kg
            Description :
            In our opinion, the machine is in very good used condition
            and can be inspected under power by appointment.

            - There are 2 identical machines available

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DECKEL-MAHO DMF 220 linear


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-053737 · milling machining centers - universal

          DECKEL-MAHO - DMF 220 linear - - 2009 -

          Technical details
          x-travel 2200 mm︱y-travel 560 mm︱z-travel 720 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Sinumerik 840D powerline with ShopMill NC swivel milling head B-axis NC table as A-axis or C-axis 50-fold automatic tool changer electronical hand wheel chip conveyor coolant through spindle (IKZ) 40bar working mode 4 Technische Daten / technical details: X-Weg / X-travel 2200 mm Y-Weg / Y-travel 560 mm Z-Weg / Z-travel 720 mm B-Achse / B-axis +90 bis -90 ° C-Achse / C-axis 360 ° Rundtischdurchmesser / diameter of rotary table 560 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 18000 UpM /rpm Vorschub / infeed 20 m/min Tischaufspannfläche / table clamping area 2600x600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 50 Antriebsleistung Spindel / drive capacity spindle 35/25 kW Gewicht ca. / weight 14000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            x-travel 2200 mm
            y-travel 560 mm
            z-travel 720 mm
            Description :
            CNC control Sinumerik 840D powerline with ShopMill
            NC swivel milling head B-axis
            NC table as A-axis or C-axis
            50-fold automatic tool changer
            electronical hand wheel
            chip conveyor
            coolant through spindle (IKZ) 40bar
            working mode 4

            Technische Daten / technical details:
            X-Weg / X-travel 2200 mm
            Y-Weg / Y-travel 560 mm
            Z-Weg / Z-travel 720 mm
            B-Achse / B-axis +90 bis -90 °
            C-Achse / C-axis 360 °
            Rundtischdurchmesser / diameter of rotary table 560 mm
            Spindelaufnahme / spindle taper SK40
            Drehzahlbereich / spindle speed 18000 UpM /rpm
            Vorschub / infeed 20 m/min
            Tischaufspannfläche / table clamping area 2600x600 mm
            Werkzeugwechselmagazinplätze / number of tool places in changer 50
            Antriebsleistung Spindel / drive capacity spindle 35/25 kW
            Gewicht ca. / weight 14000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.




        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal MIKRON UCP 600 Vario


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-053740 · milling machining centers - universal

          MIKRON - UCP 600 Vario - - 2009 -

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 450 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Heidenhain iTNC530 NC swivel-rotary table (B-axis and C-axis) pallet changing device UPS 320mm x 320mm 30-fold automatic tool changer electronical hand wheel coolant through spindle device (IKZ) chip conveyor coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 600 mm Verfahrweg Y / Y-Travel 450 mm Verfahrweg Z / Z-Travel 450 mm B-Achse Schwenktisch / B-axis swivel table -115 / +30 ° C-Achse Rundtisch / C-axis rotary table 360 ° Tischgröße / table size 320 x 320 mm Werkzeugschaft / spindle taper HSK 63 Drehzahlbereich / spindle speed 100-20000 UpM /rpm Werkzeugwechsler / tool changer 30 fach /fold Gewicht der Maschine ca. / weight ca. 9000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            x-travel 600 mm
            y-travel 450 mm
            z-travel 450 mm
            Description :
            CNC control Heidenhain iTNC530
            NC swivel-rotary table (B-axis and C-axis)
            pallet changing device UPS 320mm x 320mm
            30-fold automatic tool changer
            electronical hand wheel
            coolant through spindle device (IKZ)
            chip conveyor
            coolant device

            Technische Daten / technical details:
            Verfahrweg X / X-Travel 600 mm
            Verfahrweg Y / Y-Travel 450 mm
            Verfahrweg Z / Z-Travel 450 mm
            B-Achse Schwenktisch / B-axis swivel table -115 / +30 °
            C-Achse Rundtisch / C-axis rotary table 360 °
            Tischgröße / table size 320 x 320 mm
            Werkzeugschaft / spindle taper HSK 63
            Drehzahlbereich / spindle speed 100-20000 UpM /rpm
            Werkzeugwechsler / tool changer 30 fach /fold
            Gewicht der Maschine ca. / weight ca. 9000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.




        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal MIKRON-AGIE CHARMILLES XSM 400 U


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-559 · milling machining centers - universal

          MIKRON-AGIE CHARMILLES - XSM 400 U - - 2008 - Heidenhein TNC 530

          Technical details
          x-travel 400 mm︱y-travel 240 mm︱z-travel 350 mm︱rapid traverse 80 m/min︱turning speeds 42.000 U/min︱ 68 fach︱table weight 200 Kg︱Control Heidenhein TNC 530 ︱total power requirement kW︱weight of the machine ca. 6,7 t︱dimensions of the machine ca. m︱
            x-travel 400 mm
            y-travel 240 mm
            z-travel 350 mm
            rapid traverse 80 m/min
            turning speeds 42.000 U/min
            68 fach
            table weight 200 Kg
            Control Heidenhein TNC 530
            weight of the machine ca. 6,7 t


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DMG DMU 70 Evo Linear


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-970 · milling machining centers - universal

          DMG - DMU 70 Evo Linear - - 2008 - Heidenhain iTNC 530

          Technical details
          x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control Heidenhain iTNC 530 ︱Machine on 49.661 h︱Spindle hours 21.077 h︱tool taper SK 40 ︱handwheel el. ︱Speed 18000 U/min︱Tools changer 60 pos.︱NC table Rundtisch ︱b-axis -5/+110 °︱c-axis 360 °︱Internal cooling system 600ltr. Tank, 40 bar︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Linear 5-axis SIMULTANEOUS machining -Heidenhain infrared measuring probe -Scratch belt chip conveyor -IKZ paper belt filter 40 bar/600 liters. tank -incl. rotating viewing window, sealing air linear measuring systems -Blow air through the center of the spindle -Oil and emulsion mist separator mechanical -Flushing gun for chip rinsing -Direct position measuring system -Mainly plastic-aluminium processing
            x-travel 750 mm
            y-travel 600 mm
            z-travel 520 mm
            Control Heidenhain iTNC 530
            Machine on 49.661 h
            Spindle hours 21.077 h
            tool taper SK 40
            handwheel el.
            Speed 18000 U/min
            Tools changer 60 pos.
            NC table Rundtisch
            b-axis -5/+110 °
            c-axis 360 °
            Internal cooling system 600ltr. Tank, 40 bar
            Description :
            Linear 5-axis SIMULTANEOUS machining
            -Heidenhain infrared measuring probe
            -Scratch belt chip conveyor
            -IKZ paper belt filter 40 bar/600 liters. tank
            -incl. rotating viewing window, sealing air linear measuring systems
            -Blow air through the center of the spindle
            -Oil and emulsion mist separator mechanical
            -Flushing gun for chip rinsing
            -Direct position measuring system
            -Mainly plastic-aluminium processing


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal STARRAG-HECKERT HEC 500 H/V Athletic


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2257 · milling machining centers - universal

          STARRAG-HECKERT - HEC 500 H/V Athletic - - 2008 - Siemens 840 D

          Technical details
          x-travel 900 mm︱y-travel 770 mm︱z-travel 1000 mm︱Control Siemens 840 D ︱tool taper SK 50 ︱spindle turning speed range 20 - 6000 U/min︱rapid travel x/y/z 60 m/min︱Motor power (60% ED) 30 kW︱max. torque on the spindle (60% ED) 1080 Nm︱pallet size: 630 x 500 mm︱weight of the machine ca. 21,0 t︱dimensions of the machine ca. m︱
          - CNC-control SIEMENS 840 D - portable handwheel - 2-station pallet changer - autom. horizontal-vertical milling head - 60-station ATC - coolant equipment with paper band filter - coolant thru spindle 80 bar - oil cooler - NC-rotary table 360 deg, type DA 500 EV - Chip conveyor Interference circle diameter 1150 mm
            x-travel 900 mm
            y-travel 770 mm
            z-travel 1000 mm
            Control Siemens 840 D
            tool taper SK 50
            spindle turning speed range 20 - 6000 U/min
            rapid travel x/y/z 60 m/min
            Motor power (60% ED) 30 kW
            max. torque on the spindle (60% ED) 1080 Nm
            pallet size: 630 x 500 mm
            weight of the machine ca. 21,0 t
            Description :
            - CNC-control SIEMENS 840 D
            - portable handwheel
            - 2-station pallet changer
            - autom. horizontal-vertical milling head
            - 60-station ATC
            - coolant equipment with paper band filter
            - coolant thru spindle 80 bar
            - oil cooler
            - NC-rotary table 360 deg, type DA 500 EV
            - Chip conveyor

            Interference circle diameter 1150 mm



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DECKEL-MAHO DMC 75V linear


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-053721 · milling machining centers - universal

          DECKEL-MAHO - DMC 75V linear - - 2008 -

          Technical details
          x-travel 885 mm︱y-travel 600 mm︱z-travel 600 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Heidenhain iTNC530 NC swivel head (B-axis) NC-rotary table (C-axis) automatic tool changer for 60 tools chip conveyor coolant through spindle device New milling spindle mounted (0 hours) Technische Daten / technical details: X-Weg / X-travel 885 mm Y-Weg / Y-travel 600 mm Z-Weg / Z-travel 600 mm B-Achse / B-axis -10 - +110 ° C-Achse / C-axis 360 ° Spindelaufnahme / spindle taper SK40 Drehzahlbereich Spindel / spindle speed 18000 Upm /rpm Vorschub / infeed 90 m/min NC-Rundtischdurchmesser / NC-rotary table diameter 750 mm Antriebsleistung / drive capacity spindle 73 kW Gewicht der Maschine ca. / weight 12000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            x-travel 885 mm
            y-travel 600 mm
            z-travel 600 mm
            Description :
            CNC control Heidenhain iTNC530
            NC swivel head (B-axis)
            NC-rotary table (C-axis)
            automatic tool changer for 60 tools
            chip conveyor
            coolant through spindle device

            New milling spindle mounted (0 hours)

            Technische Daten / technical details:
            X-Weg / X-travel 885 mm
            Y-Weg / Y-travel 600 mm
            Z-Weg / Z-travel 600 mm
            B-Achse / B-axis -10 - +110 °
            C-Achse / C-axis 360 °
            Spindelaufnahme / spindle taper SK40
            Drehzahlbereich Spindel / spindle speed 18000 Upm /rpm
            Vorschub / infeed 90 m/min
            NC-Rundtischdurchmesser / NC-rotary table diameter 750 mm
            Antriebsleistung / drive capacity spindle 73 kW
            Gewicht der Maschine ca. / weight 12000 Kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.



        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •