,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Saws

          Machinelist: Saws


          Band Saw

          used Saws Band Saw KASTO - Vollautomat PBA 320/460


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6923 · Band Saw

          KASTO - Vollautomat - PBA 320/460 - - unbekannt -

          Technical details
          cutting diameter 100 - 320 mm︱saw band length 4670 mm︱cutting width 580 mm︱cutting speed 16-160 m/min︱dimensions of saw-band ca. 4670 x 38 mm︱ 100 x 320 / 100 x 460 mm︱total power requirement 7,4 kW︱weight of the machine ca. 3,0 t︱dimensions of the machine ca. 2,8 x 2,9 x 2,2 m︱
            cutting diameter 100 - 320 mm
            saw band length 4670 mm
            cutting width 580 mm
            cutting speed 16-160 m/min
            dimensions of saw-band ca. 4670 x 38 mm
            100 x 320 / 100 x 460 mm
            total power requirement 7,4 kW
            weight of the machine ca. 3,0 t
            dimensions of the machine ca. 2,8 x 2,9 x 2,2 m
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP Shark 332-1 CCS


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7075 · Band Saw

          MEP - Shark 332-1 CCS - - NEU -

          Technical details
          cutting diameter 300 mm︱saw band length 3650 mm︱cutting width 330 mm︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 45 degrees: round L 260 mm︱capacity 45 degrees: square L 250 mm︱capacity 90 degrees: flat L 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 45 degrees: round R 200 mm︱capacity 45 degrees: square R 180 mm︱capacity 45 degrees: flat R 200 x 160 mm︱saw band length 3650 x 27 x 0,9 mm︱cutting speed 40 / 80 m/min︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 0,640 t︱dimensions of the machine ca. 1,2 x 1,7 x 1,7 m︱
          Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Description: CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) Either automatic or manual cutting cycle Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm with millimeter scale Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks
            cutting diameter 300 mm
            saw band length 3650 mm
            cutting width 330 mm
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330 x 260 mm
            capacity 45 degrees: round L 260 mm
            capacity 45 degrees: square L 250 mm
            capacity 90 degrees: flat L 270 x 200 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            capacity 60 degrees: flat 170 x 170 mm
            capacity 45 degrees: round R 200 mm
            capacity 45 degrees: square R 180 mm
            capacity 45 degrees: flat R 200 x 160 mm
            saw band length 3650 x 27 x 0,9 mm
            cutting speed 40 / 80 m/min
            total power requirement 1,5 / 1,8 kW
            weight of the machine ca. 0,640 t
            dimensions of the machine ca. 1,2 x 1,7 x 1,7 m
            Description :
            Powerful miter band saw for cuts from 45 ° right to 60 °
            Left
            CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
            Feed and shutdown at the end of the cut)
            New version: now with anti-vibration rollers and an even more powerful gear
            size 75 and considerably reinforced cast steel saw frame

            Description:
            CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
            Feed and shutdown at the end of the cut)
            Either automatic or manual cutting cycle
            Stable, torsion-resistant and low-vibration saw frame made of cast steel
            Carbide band guides for maximum cutting precision
            Large deflection discs, adjustable, made of cast steel
            Large, easily adjustable and mounted turntable, by means of central axis bolts
            centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal
            Table clamp for intermediate angles. Interchangeable material supports made of
            steel
            Control panel on vertical post, swiveling, contains all control elements
            Saw band tension with band tension control and indication on the display by
            means of
            electronic converter
            Base with lockable door
            Large, laterally pull-out chip tray and coolant container with 2
            powerful coolant pumps, flushing nozzle with volume control for
            Chip removal from the work area
            Coolant gun for cleaning the machine
            Vice with quick adjustment and interchangeable clamping and
            Stop jaws
            Chip removal brush for cleaning the saw band
            Machine is prepared for all options (see price list). (Electric wire,
            Software etc.)

            Standard equipment:
            Bi-metal saw band
            Adjustable length stop 600 mm with millimeter scale
            Tool kit
            Detailed operating instructions, maintenance manual, circuit diagrams and
            Exploded view
            Attachment adapter for supply roller conveyor including 1 support roller
            Entry possibility for forklifts / pallet trucks


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEBA - VOLLAUTOMAT MEBAeco 335 DGA 2300


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2170005 · Band Saw

          MEBA - VOLLAUTOMAT - MEBAeco 335 DGA 2300 - - NEU -

          Technical details
          cutting diameter 335 mm︱saw band length 4400 x 34 x 1,1 mm︱table height 750 mm︱capacity 90 degrees: flat 500 x 335 mm︱capacity 45 degrees: round 330 mm︱capacity 45 degrees: flat 320 x 335 mm︱capacity 45 degrees: round links 305 mm︱capacity 45 degrees: flat links 305 x 335 mm︱capacity 30 degrees: round 180 ︱capacity 30 degrees: flat 170 x 33515 - 150 m/min︱workpiece weight max. 250 kg/m kg︱ 3,0 kW︱ 2600 kg︱ 4900 x 2200 x 1950 mm︱
          - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA
            cutting diameter 335 mm
            saw band length 4400 x 34 x 1,1 mm
            table height 750 mm
            capacity 90 degrees: flat 500 x 335 mm
            capacity 45 degrees: round 330 mm
            capacity 45 degrees: flat 320 x 335 mm
            capacity 45 degrees: round links 305 mm
            capacity 45 degrees: flat links 305 x 335 mm
            capacity 30 degrees: round 180
            capacity 30 degrees: flat 170 x 335
            15 - 150 m/min
            workpiece weight max. 250 kg/m kg
            3,0 kW
            2600 kg
            4900 x 2200 x 1950 mm
            Description :
            - The ergonomic panel control can be networked and offers various
            option packs
            * Teleservice for remote maintenance
            * Setting of sawing programs in the AV
            * Import of saw programs from CAD with DSTV interface and data export
            - Automatic material feed:
            - In a compact design for shorter sections or with flexible insertion tongs
            available in almost all lengths
            - Exact positioning of the material using servo positioning technology
            - Forward-looking electric saw feed with ball screw: highest
            Cutting performance and quality, while being gentle on the saw blade
            - Consistent use of the most modern recirculating ball guides: smooth-running,
            highly resilient, low-maintenance and backlash-free
            - Unique and patented double miter system: material is always
            stretched at right angles
            - Insertion tongs can be extended as required in 1000 mm increments

            Furnishing:
            - Automatic cutting pressure and feed monitoring
            - Frequency-controlled AC drive 15-150 m/min, 3 kW
            - Hydraulic material full stroke clamping
            - Automatic movement of the vice
            - Automatic saw frame height adjustment
            - Minimum speed and saw band monitoring
            - Electric miter swiveling via servo motor
            - Visualized program input with CNC control
            - Integrated MEBA tong insertion system from 5-2300 mm per stroke with
            integrated
            roller conveyor

            *Optional equipment:
            - Laser light for cutting line indication/scribing saws
            - Driven chip brush
            - Micro dosing system
            - Job menu
            - MEBA NC Server comfort package
            - Scraper belt conveyor for optimal chip disposal, 2000 mm length
            - Installation elements (4 pieces)
            - Adjustable deflector plate 335 DGA


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw BERG & SCHMID GBS 305 AutoCut


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-4106 · Band Saw

          BERG & SCHMID - GBS 305 AutoCut - - NEU -

          Technical details
          cutting diameter 280 mm︱saw band length 3370 mm︱cutting width 350 mm︱dimensions of saw-band 3370 x 27 x 0,9 mm︱ 280 mm︱ 250 mm︱ 350 x 200 mm︱ 240 mm︱ 220 mm︱ 230 x 220 mm︱ 170 mm︱ 150 mm︱ 170 x 100 mm︱saw tape speed 37 + 74 m/min︱total power requirement 1,8 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 1,5 x 1,7 x 2,0 m︱
            cutting diameter 280 mm
            saw band length 3370 mm
            cutting width 350 mm
            dimensions of saw-band 3370 x 27 x 0,9 mm
            280 mm
            250 mm
            350 x 200 mm
            240 mm
            220 mm
            230 x 220 mm
            170 mm
            150 mm
            170 x 100 mm
            saw tape speed 37 + 74 m/min
            total power requirement 1,8 kW
            weight of the machine ca. 0,6 t
            dimensions of the machine ca. 1,5 x 1,7 x 2,0 m


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP - Halbautomat Shark 281 SXI evo


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5282 · Band Saw

          MEP - Halbautomat - Shark 281 SXI evo - - NEU -

          Technical details
          cutting diameter 250 mm︱saw band length 2950 mm︱table height -- mm︱ 280 mm︱ 2950 x 27 x 0,9 mm︱ 280 x 200 mm︱ 230 mm︱ 190 mm︱ 180 x 180 mm︱ 180 mm︱ 120 mm︱ 110 x 110 mm︱ 110 mm︱ 36 / 72 m/min︱ 1,5 / 1,8 kW︱
          powerful, electro-hydraulic, semi-automatic band saw machine for Miter cuts from 0 ° to 60 ° left. Control modes: Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text: Number of cuts (piece counter) + cutting time + power consumption of the Saw band motor + saw band tension in kg (minimum band tension = 900 kg) + Saw frame position (Y-axis) / alarms / faults (description and causes) + Diagnosis… -Saw band tension with band tension control and indication on the display by means of electronic converter -Underframe with lockable door and removable coolant tray, electric coolant pump. -Vise with quick adjustment -Schipping brush for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.)
            cutting diameter 250 mm
            saw band length 2950 mm
            table height -- mm
            280 mm
            2950 x 27 x 0,9 mm
            280 x 200 mm
            230 mm
            190 mm
            180 x 180 mm
            180 mm
            120 mm
            110 x 110 mm
            110 mm
            36 / 72 m/min
            1,5 / 1,8 kW
            Description :
            powerful, electro-hydraulic, semi-automatic band saw machine for
            Miter cuts from 0 ° to 60 ° left.

            Control modes:
            Semi-automatic operation (start / stop position of the saw bow is controlled by
            the Keyboard programmed. Vice closes / opens automatically, saw bow
            is automatically returned to the beginning of the cut)

            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            - Carbide band guides for maximum cutting precision
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Control panel on vertical post, swiveling, contains all operating elements
            -Control with soft-touch keyboard, backlit display for display
            all machine parameters and messages in plain text:
            Number of cuts (piece counter) + cutting time + power consumption of the
            Saw band motor + saw band tension in kg (minimum band tension = 900 kg) +
            Saw frame position (Y-axis) / alarms / faults (description and causes) +
            Diagnosis…
            -Saw band tension with band tension control and indication on the display by
            means of electronic converter
            -Underframe with lockable door and removable coolant tray, electric coolant
            pump.
            -Vise with quick adjustment
            -Schipping brush for cleaning the saw band
            -Machine is prepared for all options (see price list). (Electric wire,
            Software etc.)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP PH 261-1 HB


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3916 · Band Saw

          MEP - PH 261-1 HB - - NEU -

          Technical details
          cutting diameter 225 mm︱saw band length 2450 mm︱table height mm︱cutting width 240 mm︱dimensions of saw-band 2450 x 27 x 0,9 mm︱area output 240 mm︱band speed 46/92 m/min︱capacity 90 degrees: round 225 mm︱capacity 90 degrees: square 200 mm︱capacity 90 degrees: flat 240 x 160 mm︱capacity 45 degrees: round 160 mm︱capacity 45 degrees: flat 155 x 115 mm︱capacity 45 degrees: square 140 mm︱capacity 60 degrees: round 90 mm︱capacity 60 degrees: flat 90 x 90 mm︱capacity 60 degrees: square 90 mm︱total power requirement 1,4 kW︱weight of the machine ca. 0,24 t︱dimensions of the machine ca. m︱
          Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band
            cutting diameter 225 mm
            saw band length 2450 mm
            cutting width 240 mm
            dimensions of saw-band 2450 x 27 x 0,9 mm
            area output 240 mm
            band speed 46/92 m/min
            capacity 90 degrees: round 225 mm
            capacity 90 degrees: square 200 mm
            capacity 90 degrees: flat 240 x 160 mm
            capacity 45 degrees: round 160 mm
            capacity 45 degrees: flat 155 x 115 mm
            capacity 45 degrees: square 140 mm
            capacity 60 degrees: round 90 mm
            capacity 60 degrees: flat 90 x 90 mm
            capacity 60 degrees: square 90 mm
            total power requirement 1,4 kW
            weight of the machine ca. 0,24 t
            Description :
            Compact, powerful workshop miter band saw machine for cuts from
            0 ° to 60 ° left

            AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring

            Description:
            -Manual cutting cycle and automatic cutting
            -AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring
            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            -Vice with quick release
            - Carbide band guides for maximum cutting precision
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Saw band tension with limit switch to check the correct band tension
            -Clearly arranged control panel with all controls
            -Electric coolant pump for cooling and lubricating the saw band
            -Schipping brush for cleaning the saw band


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP - Halbautomat SHARK 512 SXI evo


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6614 · Band Saw

          MEP - Halbautomat - SHARK 512 SXI evo - - NEU -

          Technical details
          cutting diameter 330 mm︱saw band length 4640 mm︱cutting width 510 mm︱capacity 90 degrees: flat 510 x 320 mm︱capacity 90 degrees: round 330 mm︱capacity 90 degrees: square 320 mm︱capacity 45 degrees: flat li. 350 x 320 / re. 380 x mm︱capacity 45 degrees: round li. 320 / re. 320 mm︱capacity 45 degrees: square li. 320 / re. 320 mm︱capacity 60 degrees: flat li. 230 x 310 / re. 250 x mm︱capacity 60 degrees: round li. 200 / re. 200 mm︱capacity 60 degrees: square li. 200 / re. 200 mm︱weight of the machine ca. 1,19 t︱total power requirement 4,0 kW︱
          Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision. Front, adjustable Tape guide holder on linear guides for easy, fast and accurate Adjustment for the cutting area -Large dimensioned deflection discs, adjustable made of cast steel -Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with precision stops at 0 ° / 45 ° / 60 ° and Table clamp for intermediate angles -Control panel, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: -Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis… -Saw band tension with band tension control and indication on the display by means of electronic converter -Frequency converter for stepless drive of the tool -Underframe with lockable door -Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Removal of chips from the work area -Coolant gun to clean the machine -Vise with quick adjustment and exchangeable clamping and Stop jaws, lateral adjustment on linear guides - Chip removal brush, driven, for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: -Bi-metal saw band -Adjustable length stop 600 mm with millimeter scale Tool kit -Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view -Adapter for supply roller conveyor incl. 1 support roller - Entry option for forklift / pallet truck transport
            cutting diameter 330 mm
            saw band length 4640 mm
            cutting width 510 mm
            capacity 90 degrees: flat 510 x 320 mm
            capacity 90 degrees: round 330 mm
            capacity 90 degrees: square 320 mm
            capacity 45 degrees: flat li. 350 x 320 / re. 380 x mm
            capacity 45 degrees: round li. 320 / re. 320 mm
            capacity 45 degrees: square li. 320 / re. 320 mm
            capacity 60 degrees: flat li. 230 x 310 / re. 250 x mm
            capacity 60 degrees: round li. 200 / re. 200 mm
            capacity 60 degrees: square li. 200 / re. 200 mm
            weight of the machine ca. 1,19 t
            total power requirement 4,0 kW
            Description :
            Powerful miter band saw for cuts from 60 ° right to 60 ° Left

            With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor)
            Electro-hydraulic semi-automatic machine with microprocessor control

            Functionality:
            -Semi-automatic operation (start / stop position of the saw bow is controlled
            via the
            Keyboard programmed. Vice closes / opens automatically, saw bow
            is automatically returned to the beginning of the cut)

            Features:
            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            - Carbide band guides for maximum cutting precision. Front, adjustable
            Tape guide holder on linear guides for easy, fast and accurate
            Adjustment for the cutting area
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Large, easily adjustable and mounted turntable, by means of central axis bolts
            centered turntable with precision stops at 0 ° / 45 ° / 60 ° and
            Table clamp for intermediate angles
            -Control panel, swiveling, contains all operating elements
            -Control with soft-touch keyboard, backlit display for display
            all machine parameters and messages in plain text, including:
            -Number of cuts (piece counter), cutting time, power consumption of the
            Saw band motor, saw band tension in kg (minimum band tension = 900 kg),
            Saw frame position (Y-axis), alarms / faults (description and causes),
            Diagnosis…
            -Saw band tension with band tension control and indication on the display by
            means of
            electronic converter
            -Frequency converter for stepless drive of the tool
            -Underframe with lockable door
            -Large, laterally pull-out chip tray and coolant container with 2
            powerful coolant pumps, flushing nozzle with volume control for
            Removal of chips from the work area
            -Coolant gun to clean the machine
            -Vise with quick adjustment and exchangeable clamping and
            Stop jaws, lateral adjustment on linear guides
            - Chip removal brush, driven, for cleaning the saw band
            -Machine is prepared for all options (see price list). (Electric wire,
            Software etc.)

            Standard equipment:
            -Bi-metal saw band
            -Adjustable length stop 600 mm with millimeter scale
            Tool kit
            -Detailed operating instructions, maintenance manual, circuit diagrams and
            Exploded view
            -Adapter for supply roller conveyor incl. 1 support roller
            - Entry option for forklift / pallet truck transport


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP Shark 282 CCS


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3925 · Band Saw

          MEP - Shark 282 CCS - - NEU -

          Technical details
          cutting diameter 250 mm︱saw band length 2950 mm︱cutting width 280 mm︱ 2950 x 27 x 0,9 mm︱ 285 mm︱ 36 / 72 m/min︱ 250 mm︱ 220 mm︱ 280 x 220 mm︱ 120 mm︱ 140 x 80 mm︱ 80 mm︱ 200 mm︱ links 220 x 200 / rechts mm︱ links 200 / rechts 170 mm︱ 1,86 kW︱ 0,4 t︱ 1,8 x 1,3 x 1,8 m︱
          Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Hydraulic unit for the saw band tension and monitoring with display Manometer (belt tension = 900 kg) Clear switchboard with all controls Underframe with lockable door and removable coolant tray, electric coolant pump Chip removal brush for cleaning the saw band
            cutting diameter 250 mm
            saw band length 2950 mm
            cutting width 280 mm
            2950 x 27 x 0,9 mm
            285 mm
            36 / 72 m/min
            250 mm
            220 mm
            280 x 220 mm
            120 mm
            140 x 80 mm
            80 mm
            200 mm
            links 220 x 200 / rechts mm
            links 200 / rechts 170 mm
            1,86 kW
            0,4 t
            1,8 x 1,3 x 1,8 m
            Description :
            Powerful miter band saw for cuts from 45 ° right to 60 °
            Left

            CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
            Feed and switch-off at the end of the cut)

            Manual cutting cycle
            AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring
            Stable, torsion-resistant and low-vibration saw frame made of cast steel
            Large, easily adjustable and mounted turntable, by means of central axis bolts
            centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside
            Table clamp for intermediate angles
            Vice with quick adjustment
            Carbide band guides for maximum cutting precision
            Large deflection discs, adjustable, made of cast steel
            Hydraulic unit for the saw band tension and monitoring with display
            Manometer (belt tension = 900 kg)
            Clear switchboard with all controls
            Underframe with lockable door and removable coolant tray,
            electric coolant pump
            Chip removal brush for cleaning the saw band


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP PH 262 HB


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6762 · Band Saw

          MEP - PH 262 HB - - NEU -

          Technical details
          cutting diameter 225 mm︱saw band length 2450 mm︱cutting width 240 mm︱dimensions of saw-band 2450 x 27 x ,09 mm︱band speed 46 / 92 m/min︱capacity 90 degrees: round 225 mm︱capacity 90 degrees: square 200 mm︱capacity 90 degrees: flat 240 x 160 mm︱capacity 45 degrees: round li. 160 / re. 145 mm︱capacity 45 degrees: flat li. 140 / re.125 mm︱capacity 45 degrees: square li. 155 x 115 / re. 150 x mm︱capacity 60 degrees: round 90 mm︱capacity 60 degrees: square 90 mm︱capacity 60 degrees: flat 90 x 90 mm︱motor 0,7 / 0,81 kW︱weight of the machine ca. 0,27 t︱dimensions of the machine ca. 1,2 x 1,1 x 1,5 m︱
          Compact, powerful workshop double miter band saw for cuts of 45 ° right to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and setting of the Cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Large turntable for precise miter adjustment -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vise with quick adjustment and quick approach to the material - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band
            cutting diameter 225 mm
            saw band length 2450 mm
            cutting width 240 mm
            dimensions of saw-band 2450 x 27 x ,09 mm
            band speed 46 / 92 m/min
            capacity 90 degrees: round 225 mm
            capacity 90 degrees: square 200 mm
            capacity 90 degrees: flat 240 x 160 mm
            capacity 45 degrees: round li. 160 / re. 145 mm
            capacity 45 degrees: flat li. 140 / re.125 mm
            capacity 45 degrees: square li. 155 x 115 / re. 150 x mm
            capacity 60 degrees: round 90 mm
            capacity 60 degrees: square 90 mm
            capacity 60 degrees: flat 90 x 90 mm
            motor 0,7 / 0,81 kW
            weight of the machine ca. 0,27 t
            dimensions of the machine ca. 1,2 x 1,1 x 1,5 m
            Description :
            Compact, powerful workshop double miter band saw for cuts of 45 °
            right to 60 ° left

            AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and setting of the

            Cutting pressure via compensating spring

            Description:
            -Manual cutting cycle and automatic cutting
            -AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring
            -Large turntable for precise miter adjustment
            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            -Vise with quick adjustment and quick approach to the material
            - Carbide band guides for maximum cutting precision
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Saw band tension with limit switch to check the correct band tension
            -Clearly arranged control panel with all controls
            -Electric coolant pump for cooling and lubricating the saw band
            -Schipping brush for cleaning the saw band


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw BERG & SCHMID GBS 250 Super AutoCut


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2170007 · Band Saw

          BERG & SCHMID - GBS 250 Super AutoCut - - NEU -

          Technical details
          cutting diameter 255 mm︱saw band length 2765 x 27 x 0,9 mm︱table height 950 mm︱ 18-110 m/min︱ 255 mm︱capacity 90 degrees: square 240 mm︱capacity 90 degrees: flat 300 x 180 mm︱capacity 45 degrees: round 210 mm︱capacity 45 degrees: square 190 mm︱capacity 45 degrees: flat 200 x 160 mm︱capacity 60 degrees: round 135 mm︱capacity 60 degrees: square 110 mm︱capacity 60 degrees: flat 130 x 100 mm︱capacity 45 degrees: round rechts 180 mm︱capacity 45 degrees: square rechts 160 mm︱capacity 45 degrees: flat rechts 180 x 100 mm︱ 1,5/1,8 kW︱ 350 kg︱ 1700 x 900 x 2000 mm︱
          Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system
            cutting diameter 255 mm
            saw band length 2765 x 27 x 0,9 mm
            table height 950 mm
            18-110 m/min
            255 mm
            capacity 90 degrees: square 240 mm
            capacity 90 degrees: flat 300 x 180 mm
            capacity 45 degrees: round 210 mm
            capacity 45 degrees: square 190 mm
            capacity 45 degrees: flat 200 x 160 mm
            capacity 60 degrees: round 135 mm
            capacity 60 degrees: square 110 mm
            capacity 60 degrees: flat 130 x 100 mm
            capacity 45 degrees: round rechts 180 mm
            capacity 45 degrees: square rechts 160 mm
            capacity 45 degrees: flat rechts 180 x 100 mm
            1,5/1,8 kW
            350 kg
            1700 x 900 x 2000 mm
            Description :
            Manufacturer no. 20437

            Description:
            - Miter cuts left 60° and right 45°
            - Quick-action clamping stick can be moved in the T-slot for quick position
            changes
            - Hydraulic brake cylinder
            - Large ball-bearing turntable for easy miter adjustment (durable)
            - Chip clearing brush
            - Machine base with automatic cooling system
            - Lockable main switch, emergency stop separately
            - EMC (Electromagnetic Compatibility), UVV
            - Current consumption display (saw band wear history, tool monitoring)
            - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut
            system


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw BERG & SCHMID GBS 218 Eco AutoCut


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-4100 · Band Saw

          BERG & SCHMID - GBS 218 Eco AutoCut - - NEU -

          Technical details
          cutting diameter 220 mm︱saw band length 2455 mm︱cutting width 230 mm︱cutting speed 35 + 70 m/min︱dimensions of saw-band 2455 x 27 x 0,9 mm︱ 90 mm︱ 90 mm︱ 90 x 100 mm︱ 150 mm︱ 150 mm︱ 150 x 210 mm︱ 220 mm︱ 210 mm︱ 230 x 185 mm︱total power requirement 1,2 kW︱weight of the machine ca. 0,24 t︱dimensions of the machine ca. 1,2 x 0,6 x 1,7 m︱
          Berg & Schmid metal band saw GBS 218 eco AutoCut robust 400 volts Metal band saw with continuously adjustable band speed, miter up to 60°, automatic cooling and AutoCut feed system - for sawing steel and stainless steel and aluminum profiles. AutoCut system: - Automatic saw frame lowering via the hydraulic cylinder with stepless Adjustable feed and limit switch at the end of the cut. - Fast lowering of the saw frame from the rest position to the workpiece, then switch to the normal saw feed (e.g. for marking). - Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). The brake cylinder allows the saw to be in any position during the return stroke be positioned.
            cutting diameter 220 mm
            saw band length 2455 mm
            cutting width 230 mm
            cutting speed 35 + 70 m/min
            dimensions of saw-band 2455 x 27 x 0,9 mm
            90 mm
            90 mm
            90 x 100 mm
            150 mm
            150 mm
            150 x 210 mm
            220 mm
            210 mm
            230 x 185 mm
            total power requirement 1,2 kW
            weight of the machine ca. 0,24 t
            dimensions of the machine ca. 1,2 x 0,6 x 1,7 m
            Description :
            Berg & Schmid metal band saw GBS 218 eco AutoCut robust 400 volts
            Metal band saw with continuously adjustable band speed, miter up to
            60°, automatic cooling and AutoCut feed system - for sawing steel and stainless
            steel and aluminum profiles.

            AutoCut system:
            - Automatic saw frame lowering via the hydraulic cylinder with stepless
            Adjustable feed and limit switch at the end of the cut.
            - Fast lowering of the saw frame from the rest position to the workpiece,
            then switch to the normal saw feed (e.g. for marking).
            - Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for
            release). The brake cylinder allows the saw to be in any position during the
            return stroke
            be positioned.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw BERNARDO HBS 275


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6969 · Band Saw

          BERNARDO - HBS 275 - - NEU -

          Technical details
          cutting diameter 225 mm︱saw band length 2480 mm︱cutting width 150 mm︱table height 910 mm︱capacity 45 degrees: flat 160 x 160 mm︱capacity 45 degrees: round 160 mm︱capacity 90 degrees: flat 245 x 150 mm︱capacity 90 degrees: round 225 mm︱turning speed range 45 / 90 U/min︱dimensions of saw-band 2480 x 27 x 0,9 mm︱total power requirement 1,5 kW︱dimensions of the machine ca. 1,43 x 0,72 x 1,7 m︱weight of the machine ca. 0,2 t︱
          Equipment: - For cutting profiles, pipes, solid materials made of iron - and non-ferrous materials - the saw frame can be swiveled up to 60 ° for miter cuts - Infinitely variable lowering via hydraulic lowering cylinder - Torsion-free, strongly dimensioned saw arm made of gray cast iron - 2 Saw band speeds for optimal cutting results (400 V) - robust Construction, therefore quiet and vibration-free running - automatic Limit switch-off according to material average - Robust vice made of gray cast iron with quick lock - ball-bearing saw band guide with quick adjustment to adapt to the workpiece width - guarantees an optimal work result Scope of delivery: - saw band - workpiece stop - underframe - manometer for Belt tensioning - Vice with quick lock - Coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch - Operating instructions in German - Chip clearing brush (Art-No: 04-1696)
            cutting diameter 225 mm
            saw band length 2480 mm
            cutting width 150 mm
            table height 910 mm
            capacity 45 degrees: flat 160 x 160 mm
            capacity 45 degrees: round 160 mm
            capacity 90 degrees: flat 245 x 150 mm
            capacity 90 degrees: round 225 mm
            turning speed range 45 / 90 U/min
            dimensions of saw-band 2480 x 27 x 0,9 mm
            total power requirement 1,5 kW
            dimensions of the machine ca. 1,43 x 0,72 x 1,7 m
            weight of the machine ca. 0,2 t
            Description :
            Equipment: - For cutting profiles, pipes, solid materials made of iron -
            and non-ferrous materials - the saw frame can be swiveled up to 60 ° for miter
            cuts - Infinitely variable lowering via hydraulic lowering cylinder -
            Torsion-free, strongly dimensioned saw arm made of gray cast iron - 2
            Saw band speeds for optimal cutting results (400 V) - robust
            Construction, therefore quiet and vibration-free running - automatic
            Limit switch-off according to material average - Robust vice made of gray cast
            iron with quick lock - ball-bearing saw band guide with quick adjustment
            to adapt to the workpiece width - guarantees an optimal work result
            Scope of delivery: - saw band - workpiece stop - underframe - manometer for
            Belt tensioning - Vice with quick lock - Coolant device - Hydraulic lowering
            cylinder - Motor protection switch - Automatic limit switch -
            Operating instructions in German - Chip clearing brush (Art-No: 04-1696)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP PH 211 -1 HB


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5374 · Band Saw

          MEP - PH 211 -1 HB - - NEU -

          Technical details
          cutting diameter 180 mm︱saw band length 2130 mm︱cutting width 200 mm︱dimensions of saw-band 2130 x 20 x 0,9 mm︱ 200 mm︱band speed 40/80 m/min︱capacity 90 degrees: round 180 mm︱capacity 90 degrees: square 180 mm︱capacity 90 degrees: flat 200 x 150 mm︱capacity 45 degrees: round 115 mm︱capacity 45 degrees: flat 125 x 110 mm︱capacity 45 degrees: square 110 mm︱capacity 60 degrees: round 70 mm︱capacity 60 degrees: flat 70 x 70 mm︱capacity 60 degrees: square 70 mm︱total power requirement 0,7 / 0,81 kW︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,4 x 0,9 x 1,6 m︱
          Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left Automatic cut (HB) and manual cut Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -päneräumb Brush for cleaning the saw band
            cutting diameter 180 mm
            saw band length 2130 mm
            cutting width 200 mm
            dimensions of saw-band 2130 x 20 x 0,9 mm
            200 mm
            band speed 40/80 m/min
            capacity 90 degrees: round 180 mm
            capacity 90 degrees: square 180 mm
            capacity 90 degrees: flat 200 x 150 mm
            capacity 45 degrees: round 115 mm
            capacity 45 degrees: flat 125 x 110 mm
            capacity 45 degrees: square 110 mm
            capacity 60 degrees: round 70 mm
            capacity 60 degrees: flat 70 x 70 mm
            capacity 60 degrees: square 70 mm
            total power requirement 0,7 / 0,81 kW
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 1,4 x 0,9 x 1,6 m
            Description :
            Compact, powerful workshop miter band saw machine for cuts from
            0 ° to 60 ° left

            Automatic cut (HB) and manual cut

            Description:
            -Manual cutting cycle and automatic cutting
            -AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring
            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            -Vice with quick release
            - Carbide band guides for maximum cutting precision
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Saw band tension with limit switch to check the correct band tension
            -Clearly arranged control panel with all controls
            -Electric coolant pump for cooling and lubricating the saw band
            -päneräumb Brush for cleaning the saw band


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP - VOLLAUTOMAT SHARK 331-1 NC 5.0 SPIDER


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6976 · Band Saw

          MEP - VOLLAUTOMAT - SHARK 331-1 NC 5.0 SPIDER - - NEU -

          Technical details
          cutting diameter 300 mm︱saw band length 3650 mm︱cutting width 330 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱band speed 15 - 100 m/min︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 45 degrees: round li. 260 mm︱capacity 45 degrees: square li. 250 mm︱capacity 45 degrees: flat li. 270 x 200 mm︱capacity 60 degrees: round li. 180 mm︱capacity 60 degrees: square li. 170 mm︱capacity 60 degrees: flat 330 x 260 mm︱motor 2,2 kW︱weight of the machine ca. 1,24 t︱dimensions of the machine ca. 1,9 x 1,8 m︱Control
          Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left -new, innovative (Windows CE based) touch screen control -Cutting area around max. 280 mm (solid material) - Required space only 3.42 square meters New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame - Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard. Vice closes / opens automatically, The saw arch is automatically returned to the start of the cut) - Fully automatic operation (10 programs, each with different Quantity (max. 9999) and length (max. 9999.9 mm) with an accuracy of ± 0.1 / 600 mm. Execution of up to 10 combined programs in one cycle. Three different cutting cycles can be selected - Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision - Large-sized deflection discs, adjustable made of cast steel with integrated belt circulation control - Dynamic cutting pressure control (variably programmable, control via Stepper motor due to the torque monitoring of the belt drive) - Precise adjustment of the cutting feed with information in mm / min. - Frequency converter for stepless drive of the tool - X-axis (material feed) via recirculating ball spindle with at least remaining piece 210 mm - Control (Windows CE based) with 7 "touch screen and additional soft- Buttons, backlit display to show all Machine parameters and messages in plain text: Number of cuts (programmed / executed) / cutting speed / lowering speed / preselectable Cutting pressure (in amps) / cutting time / power consumption of the saw band motor / Saw band tension in kg (minimum band tension = 900 kg) / saw frame position (Y- Axis) / feeder position (X-axis) / alarms / faults (description and Causes) / diagnostics ... - Saw band tension with band tension control and indication on the display by means of electronic converter - Base with door - Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area, removable coolant tray 100 liters - Coolant gun for cleaning the machine - Vice with quick adjustment and exchangeable clamping and Stop jaws - Chip removal brush for cleaning the saw band
            cutting diameter 300 mm
            saw band length 3650 mm
            cutting width 330 mm
            dimensions of saw-band 3650 x 27 x 0,9 mm
            band speed 15 - 100 m/min
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330 x 260 mm
            capacity 45 degrees: round li. 260 mm
            capacity 45 degrees: square li. 250 mm
            capacity 45 degrees: flat li. 270 x 200 mm
            capacity 60 degrees: round li. 180 mm
            capacity 60 degrees: square li. 170 mm
            capacity 60 degrees: flat 330 x 260 mm
            motor 2,2 kW
            weight of the machine ca. 1,24 t
            dimensions of the machine ca. 1,9 x 1,8 m
            Description :
            Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left

            -new, innovative (Windows CE based) touch screen control
            -Cutting area around max. 280 mm (solid material)
            - Required space only 3.42 square meters
            New version: now with anti-vibration rollers and an even more powerful gear
            size 75 and considerably reinforced cast steel saw frame

            - Semi-automatic operation (start / stop position of the saw bow is
            programmed via the keyboard. Vice closes / opens automatically,
            The saw arch is automatically returned to the start of the cut)
            - Fully automatic operation (10 programs, each with different
            Quantity (max. 9999) and length (max. 9999.9 mm) with an accuracy of ± 0.1 /
            600 mm. Execution of up to 10 combined programs in one cycle. Three
            different cutting cycles can be selected
            - Stable, torsion-resistant and low-vibration saw frame made of cast steel
            - Carbide band guides for maximum cutting precision
            - Large-sized deflection discs, adjustable made of cast steel with
            integrated belt circulation control
            - Dynamic cutting pressure control (variably programmable, control via
            Stepper motor due to the torque monitoring of the belt drive)
            - Precise adjustment of the cutting feed with information in mm / min.
            - Frequency converter for stepless drive of the tool
            - X-axis (material feed) via recirculating ball spindle with at least remaining
            piece 210 mm
            - Control (Windows CE based) with 7 "touch screen and additional soft-
            Buttons, backlit display to show all
            Machine parameters and messages in plain text: Number of cuts (programmed
            / executed) / cutting speed / lowering speed / preselectable
            Cutting pressure (in amps) / cutting time / power consumption of the saw band
            motor /
            Saw band tension in kg (minimum band tension = 900 kg) / saw frame position (Y-
            Axis) / feeder position (X-axis) / alarms / faults (description and
            Causes) / diagnostics ...
            - Saw band tension with band tension control and indication on the display by
            means of
            electronic converter
            - Base with door
            - Large, laterally pull-out chip tray and coolant container with 2
            powerful coolant pumps, flushing nozzle with volume control for
            Chip removal from the work area, removable coolant tray 100 liters
            - Coolant gun for cleaning the machine
            - Vice with quick adjustment and exchangeable clamping and Stop jaws
            - Chip removal brush for cleaning the saw band


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP Shark 281 CCS


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-4278 · Band Saw

          MEP - Shark 281 CCS - - NEU -

          Technical details
          cutting diameter 250 mm︱saw band length 2950 mm︱cutting width 280 mm︱dimensions of saw-band 2950 x 27 x 0,9 mm︱capacity 90 degrees: flat 280 x 200 mm︱capacity 90 degrees: square 230 mm︱capacity 45 degrees: round 190 mm︱capacity 45 degrees: flat 180 x 180 mm︱capacity 45 degrees: square 180 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: flat 110 x 110 mm︱capacity 60 degrees: square 110 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 0,4 t︱
          Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band
            cutting diameter 250 mm
            saw band length 2950 mm
            cutting width 280 mm
            dimensions of saw-band 2950 x 27 x 0,9 mm
            capacity 90 degrees: flat 280 x 200 mm
            capacity 90 degrees: square 230 mm
            capacity 45 degrees: round 190 mm
            capacity 45 degrees: flat 180 x 180 mm
            capacity 45 degrees: square 180 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: flat 110 x 110 mm
            capacity 60 degrees: square 110 mm
            total power requirement 1,5 / 1,8 kW
            weight of the machine ca. 0,4 t
            Description :
            Powerful miter band saw for cuts from 0 ° to 60 ° left

            -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
            Feed and switch-off at the end of the cut)

            Description:
            -Manual cutting cycle
            -AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring
            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            -Vice with quick release
            - Carbide band guides for maximum cutting precision
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Hydraulic unit for the saw band tension and monitoring with display on
            Manometer (belt tension = 900 kg)
            -Clearly arranged control panel with all controls
            -Electric coolant pump for cooling and lubricating the saw band
            -Schipping brush for cleaning the saw band


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw BERG & SCHMID - Halbautomat GBS 305 HA-I Easy


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6517 · Band Saw

          BERG & SCHMID - Halbautomat - GBS 305 HA-I Easy - - NEU -

          Technical details
          cutting diameter 305 mm︱saw band length 3375 mm︱cutting width 350 mm︱dimensions of saw-band 3375 x 27 x 0,9 mm︱ 305 mm︱ 260 mm︱ 350 x 200 mm︱ 250 mm︱ 230 mm︱ 230 x 200 mm︱ 175 mm︱ 155 mm︱ 170 x 100 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 1,5 x 1,8 x 1,9 m︱
            cutting diameter 305 mm
            saw band length 3375 mm
            cutting width 350 mm
            dimensions of saw-band 3375 x 27 x 0,9 mm
            305 mm
            260 mm
            350 x 200 mm
            250 mm
            230 mm
            230 x 200 mm
            175 mm
            155 mm
            170 x 100 mm
            total power requirement 1,5 / 1,8 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 1,5 x 1,8 x 1,9 m


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw SANDERS BMBS 220 H-G


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2170001 · Band Saw

          SANDERS - BMBS 220 H-G - - NEU -

          Technical details
          cutting diameter 220 mm︱saw band length 2450 mm︱cutting width 250 mm︱cutting speed 40 / 80 m/min︱dimensions of saw-band 2450 x 27 x 0,9 mm︱ 100 mm︱ 90 mm︱ 90 x 90 mm︱ 160 mm︱ 160 x 110 mm︱ 250 x 190 mm︱total power requirement 0,75 / 1,1 kW︱table height 925 mm︱weight of the machine ca. 218 kg︱dimensions of the machine ca. 1300 x 700 x 1530 mm︱
            cutting diameter 220 mm
            saw band length 2450 mm
            cutting width 250 mm
            cutting speed 40 / 80 m/min
            dimensions of saw-band 2450 x 27 x 0,9 mm
            100 mm
            90 mm
            90 x 90 mm
            160 mm
            160 x 110 mm
            250 x 190 mm
            total power requirement 0,75 / 1,1 kW
            table height 925 mm
            weight of the machine ca. 218 kg
            dimensions of the machine ca. 1300 x 700 x 1530 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP - Halbautomat Shark 282 SXI evo


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-4576 · Band Saw

          MEP - Halbautomat - Shark 282 SXI evo - - NEU -

          Technical details
          cutting diameter 250 mm︱saw band length 2950 mm︱cutting width 280 mm︱turning speed range: 36 / 72 m/min︱dimensions of saw-band 2950 x 27 x 0,9 mm︱capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 220 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 45 degrees: round 230 mm︱capacity 45 degrees: square 200 mm︱capacity 45 degrees: flat 220 x 200 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 80 mm︱capacity 60 degrees: flat 140 x 80 mm︱work height max. 870 mm︱total power requirement 2 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,8 x 0,9 x 1,8 m︱
          Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control and 4 Modes of operation Description: - Indexing at 0 ° / 45 ° / 60 ° and internal table clamp for Intermediate angle - Control panel on vertical post, swiveling, contains all Controls - Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: Number of cuts (piece counter) / cutting time / power consumption of the Saw band motor / saw band tension in kg (minimum band tension = 900 kg) / Saw frame position (Y-axis) / Alarms / Faults (description and causes) / Diagnosis… - Saw band tension with band tension control and indication on the display by means of electronic converter - Underframe with lockable door and removable coolant tray electric coolant pump - Vice with quick adjustment - Chip removal brush for cleaning the saw band Standard equipment: - Bi-metal saw band - Adjustable length stop 600 mm - tool kit - Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view - Attachment adapter for supply roller conveyor incl. 1 support roller - Entry possibility for forklift / pallet truck transport
            cutting diameter 250 mm
            saw band length 2950 mm
            cutting width 280 mm
            turning speed range: 36 / 72 m/min
            dimensions of saw-band 2950 x 27 x 0,9 mm
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 220 mm
            capacity 90 degrees: flat 280 x 220 mm
            capacity 45 degrees: round 230 mm
            capacity 45 degrees: square 200 mm
            capacity 45 degrees: flat 220 x 200 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 80 mm
            capacity 60 degrees: flat 140 x 80 mm
            work height max. 870 mm
            total power requirement 2 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,8 x 0,9 x 1,8 m
            Description :
            Powerful miter band saw for cuts from 45 ° right to 60 ° Left

            Electro-hydraulic semi-automatic machine with microprocessor control and 4
            Modes of operation

            Description:
            - Indexing at 0 ° / 45 ° / 60 ° and internal table clamp for
            Intermediate angle
            - Control panel on vertical post, swiveling, contains all
            Controls
            - Control with soft-touch keyboard, backlit display for display
            all machine parameters and messages in plain text, including:
            Number of cuts (piece counter) / cutting time / power consumption of the
            Saw band motor / saw band tension in kg (minimum band tension = 900 kg) /
            Saw frame position (Y-axis) / Alarms / Faults (description and causes) /
            Diagnosis…
            - Saw band tension with band tension control and indication on the display by
            means of
            electronic converter
            - Underframe with lockable door and removable coolant tray
            electric coolant pump
            - Vice with quick adjustment
            - Chip removal brush for cleaning the saw band

            Standard equipment:
            - Bi-metal saw band
            - Adjustable length stop 600 mm
            - tool kit
            - Detailed operating instructions, maintenance manual, circuit diagrams and
            Exploded view
            - Attachment adapter for supply roller conveyor incl. 1 support roller
            - Entry possibility for forklift / pallet truck transport


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP - Halbautomat Shark 382 SXI evo


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6250 · Band Saw

          MEP - Halbautomat - Shark 382 SXI evo - - NEU -

          Technical details
          cutting diameter 300 mm︱saw band length 3320 mm︱table height -- mm︱ 330 mm︱ 40 / 80 m/min︱ 3440 x 27 x 0,9 mm︱ 280 mm︱ 260 mm︱ 380 x 260 mm︱ li 260 mm︱ li 250 mm︱ li 300 x 200 mm︱ re 200 mm︱ re 180 mm︱ re 230 x 160 mm︱ 180 mm︱ 170 mm︱ 200 x 170 mm︱ 870 mm︱ 1,5/1,8 kW︱
          Control modes: -Manual mode -Semi-automatic-dynamic operation (the semi-automatic cut is started by manually approaching the saw bow from any position by actuating the hand switch) -Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard, vice closes / opens automatically, saw bow is automatically returned to the start of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Large, easily adjustable and mounted turntable, turntable centered by central axis bolts with indexing at 0 ° / 45 ° / 60 ° and internal table clamp for intermediate angles. Interchangeable material supports made of steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for displaying all machine parameters and messages in plain text, including: -Number of cuts (piece counter), cutting time, power consumption of the saw band motor, saw band tension in kg (minimum band tension = 900 kg), saw frame position (Y-axis), alarms / faults (description and causes), diagnostics ... -Saw band tension with band tension control and indication on the display by means of an electronic converter -Underframe with lockable door -Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for removing chips from the work area -Coolant gun to clean the machine -Vise with quick adjustment and exchangeable clamping and stop jaws -Schipping brush for cleaning the saw band -Machine is prepared for all options (see price list). (Cables, software etc.) Standard equipment: -Bi-metal saw band -Adjustable length stop 600 mm Tool kit -Detailed operating instructions, maintenance manual, circuit diagrams and exploded views -Adapter for supply roller conveyor incl. 1 support roller - Entry option for forklift / pallet truck transport
            cutting diameter 300 mm
            saw band length 3320 mm
            table height -- mm
            330 mm
            40 / 80 m/min
            3440 x 27 x 0,9 mm
            280 mm
            260 mm
            380 x 260 mm
            li 260 mm
            li 250 mm
            li 300 x 200 mm
            re 200 mm
            re 180 mm
            re 230 x 160 mm
            180 mm
            170 mm
            200 x 170 mm
            870 mm
            1,5/1,8 kW
            Description :
            Control modes:
            -Manual mode
            -Semi-automatic-dynamic operation (the semi-automatic cut is started by
            manually approaching the saw bow from any position by actuating the hand switch)
            -Semi-automatic operation (start / stop position of the saw bow is programmed
            via the keyboard, vice closes / opens automatically, saw bow is automatically
            returned to the start of the cut)

            Features:
            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            - Carbide band guides for maximum cutting precision
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Large, easily adjustable and mounted turntable, turntable centered by central
            axis bolts with indexing at 0 ° / 45 ° / 60 ° and internal table clamp for
            intermediate angles. Interchangeable material supports made of steel
            -Control panel on vertical post, swiveling, contains all operating elements
            -Control with soft-touch keyboard, backlit display for displaying all machine
            parameters and messages in plain text, including:
            -Number of cuts (piece counter), cutting time, power consumption of the saw
            band motor, saw band tension in kg (minimum band tension = 900 kg), saw frame
            position (Y-axis), alarms / faults (description and causes), diagnostics ...
            -Saw band tension with band tension control and indication on the display by
            means of an electronic converter
            -Underframe with lockable door
            -Large, laterally pull-out chip tray and coolant container with 2 powerful
            coolant pumps, flushing nozzle with volume control for removing chips from the
            work area
            -Coolant gun to clean the machine
            -Vise with quick adjustment and exchangeable clamping and stop jaws
            -Schipping brush for cleaning the saw band
            -Machine is prepared for all options (see price list). (Cables, software etc.)

            Standard equipment:
            -Bi-metal saw band
            -Adjustable length stop 600 mm
            Tool kit
            -Detailed operating instructions, maintenance manual, circuit diagrams and
            exploded views
            -Adapter for supply roller conveyor incl. 1 support roller
            - Entry option for forklift / pallet truck transport


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw BERG & SCHMID GBS 242 DG Auto CUT


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5283 · Band Saw

          BERG & SCHMID - GBS 242 DG Auto CUT - - NEU -

          Technical details
          cutting diameter 250 mm︱saw band length 2965 mm︱table height 940 mm︱ 290 mm︱ 35 / 70 = 2 Stufen m/min︱ 2965x 27 x 0,9 mm︱ 140 mm︱ 130 x 130 mm︱ 140 x 130 mm︱ li. 220/re. 170 mm︱ li. 200x100/re. 170x170 mm︱ li. 210x200/re.170x170 mm︱ 250 mm︱ 210 x 210 mm︱ 290 x 210 mm︱total power requirement 1,1/1,3 kW︱weight of the machine ca. 290 kg︱dimensions of the machine ca. 1,5 x 1,25 x 1,7 m︱
            cutting diameter 250 mm
            saw band length 2965 mm
            table height 940 mm
            290 mm
            35 / 70 = 2 Stufen m/min
            2965x 27 x 0,9 mm
            140 mm
            130 x 130 mm
            140 x 130 mm
            li. 220/re. 170 mm
            li. 200x100/re. 170x170 mm
            li. 210x200/re.170x170 mm
            250 mm
            210 x 210 mm
            290 x 210 mm
            total power requirement 1,1/1,3 kW
            weight of the machine ca. 290 kg
            dimensions of the machine ca. 1,5 x 1,25 x 1,7 m
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP - Halbautomat Shark 332-1 SXI evo


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3789 · Band Saw

          MEP - Halbautomat - Shark 332-1 SXI evo - - NEU -

          Technical details
          cutting diameter 300 mm︱saw band length 3650 mm︱cutting width 330 mm︱ 40 / 80 m/min︱ 3650 x 27 x 0,9 mm︱ 300 mm︱ 260 mm︱ 330 x 260 mm︱ 260 mm︱ 250 mm︱ 270 x 200 mm︱ 180 mm︱ 170 mm︱ 170 x 170 mm︱ 870 mm︱ 2,35 kW︱ 0,7 t︱ 2,7 x 1,6 x 2,0 m︱
          Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Control modes: Manual mode Semi-automatic dynamic operation (The semi-automatic cut is made by manual approach of the saw bow from any position via actuation of the handset started) Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed Vice closes / opens automatically, the saw curve becomes the start of the cut automatically returned) Description: Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis… Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks
            cutting diameter 300 mm
            saw band length 3650 mm
            cutting width 330 mm
            40 / 80 m/min
            3650 x 27 x 0,9 mm
            300 mm
            260 mm
            330 x 260 mm
            260 mm
            250 mm
            270 x 200 mm
            180 mm
            170 mm
            170 x 170 mm
            870 mm
            2,35 kW
            0,7 t
            2,7 x 1,6 x 2,0 m
            Description :
            Powerful miter band saw for cuts from 45 ° right to 60 °
            Left

            Electro-hydraulic semi-automatic machine with microprocessor control
            New version: now with anti-vibration rollers and an even more powerful gear
            size 75 and considerably reinforced cast steel saw frame


            Control modes:
            Manual mode
            Semi-automatic dynamic operation (The semi-automatic cut is made by
            manual approach of the saw bow from any position via actuation
            of the handset started)
            Semi-automatic operation (start / stop position of the saw bow is controlled by
            the
            Keyboard programmed
            Vice closes / opens automatically, the saw curve becomes the start of the cut
            automatically returned)

            Description:
            Stable, torsion-resistant and low-vibration saw frame made of cast steel
            Carbide band guides for maximum cutting precision
            Large deflection discs, adjustable, made of cast steel
            Large, easily adjustable and mounted turntable, by means of central axis bolts
            centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal
            Table clamp for intermediate angles. Interchangeable material supports made of
            steel
            Control panel on vertical post, swiveling, contains all control elements
            Control with soft-touch keyboard, backlit display for display
            all machine parameters and messages in plain text, including:
            Number of cuts (piece counter), cutting time, power consumption of the
            Saw band motor, saw band tension in kg (minimum band tension = 900 kg),
            Saw frame position (Y-axis), alarms / faults (description and causes),
            Diagnosis…
            Saw band tension with band tension control and indication on the display by
            means of
            electronic converter
            Base with lockable door
            Large, laterally pull-out chip tray and coolant container with 2
            powerful coolant pumps, flushing nozzle with volume control for
            Chip removal from the work area
            Coolant gun for cleaning the machine
            Vice with quick adjustment and interchangeable clamping and
            Stop jaws
            Chip removal brush for cleaning the saw band
            Machine is prepared for all options (see price list). (Electric wire,
            Software etc.)

            Standard equipment:
            Bi-metal saw band
            Adjustable length stop 600 mm
            Tool kit
            Detailed operating instructions, maintenance manual, circuit diagrams and
            Exploded view
            Attachment adapter for supply roller conveyor including 1 support roller
            Entry possibility for forklifts / pallet trucks


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw MEP - VOLLAUTOMAT SHARK 332-1 NC 5.0


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7228 · Band Saw

          MEP - VOLLAUTOMAT - SHARK 332-1 NC 5.0 - - NEU - Windows CE basiert

          Technical details
          cutting diameter 300 mm︱saw band length 3650 mm︱cutting width 330 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱band speed 15 - 100 m/min︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 45 degrees: round li. 260 / re. 200 mm︱capacity 45 degrees: square li. 250 / re. 180 mm︱capacity 45 degrees: flat li. 270x200 re. 200x160 mm︱capacity 60 degrees: round li. 180 mm︱capacity 60 degrees: square li. 170 mm︱capacity 60 degrees: flat li. 170 x 170 mm︱motor 2,2 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,9 x 1,8 m︱Control Windows CE basiert
          Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left). -Manual or semi-automatic dynamic cycle to make cuts outside of series production directly without programming. -Numerically controlled band saw machines with the new Windows “CE” based control, specially developed by MEP for automatic machines. FEATURES: -User interface with 7 ”touch screen display and mechanical keys for the operating functions of the sawing machine, guarantees reliable operation, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker -The control console on a swiveling arm enables comfortable and safe operation from any position. -Display and entry of alarm and error messages with the option of displaying incidents that have occurred. - Infinitely variable regulation of the cutting speed from 15 to 100 m / min via frequency converter (inverter). -The latest generation of hydraulic power pack, extremely powerful with low energy consumption. -Material feed with stepper motor via ball screw mounted on opposing ball bearings; 600 mm repeatable single stroke to saw any length. -Positioning of the saw head and movement of the feeder using a joystick. -Automatic detection of the cutting start position. -Hand-operated strap tension control with indication on the display by means of an electronic converter. -Automatic monitoring of the cutting load through a servo valve mounted directly on the cylinder. -The coolant pan (equipped with 2 electric pumps for lubrication and cooling of the saw band) is built into the underframe -The chip drawer can be replaced by a motorized chip conveyor - see special accessories. -Preparation for the installation of the OPTIONAL minimum quantity lubrication system in addition to the conventional standard lubrication with emulsion oil. -Schipping brush. -Bimetal saw band for solid and profile material. -Tool and instructions for use with list of spare parts.
            cutting diameter 300 mm
            saw band length 3650 mm
            cutting width 330 mm
            dimensions of saw-band 3650 x 27 x 0,9 mm
            band speed 15 - 100 m/min
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330 x 260 mm
            capacity 45 degrees: round li. 260 / re. 200 mm
            capacity 45 degrees: square li. 250 / re. 180 mm
            capacity 45 degrees: flat li. 270x200 re. 200x160 mm
            capacity 60 degrees: round li. 180 mm
            capacity 60 degrees: square li. 170 mm
            capacity 60 degrees: flat li. 170 x 170 mm
            motor 2,2 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,9 x 1,8 m
            Control Windows CE basiert
            Description :
            Powerful miter band saw for cuts from 45 ° right to 60 ° left

            Electro-hydraulic CNC machine with Windows CE based touch screen control

            -Automatic cycle (cuts from 0 ° to 60 ° left)
            -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right
            to 60 ° left).
            -Manual or semi-automatic dynamic cycle to make cuts outside of series
            production directly without programming.
            -Numerically controlled band saw machines with the new Windows “CE” based
            control, specially developed by MEP for automatic machines.

            FEATURES:
            -User interface with 7 ”touch screen display and mechanical keys for the
            operating functions of the sawing machine, guarantees reliable operation,
            simple and intuitive, and real-time control of all cutting parameters.
            - Protective housing for the safety of the worker
            -The control console on a swiveling arm enables comfortable and safe operation
            from any position.
            -Display and entry of alarm and error messages with the option of displaying
            incidents that have occurred.
            - Infinitely variable regulation of the cutting speed from 15 to 100 m / min
            via frequency converter (inverter).
            -The latest generation of hydraulic power pack, extremely powerful with low
            energy consumption.
            -Material feed with stepper motor via ball screw mounted on opposing ball
            bearings; 600 mm repeatable single stroke to saw any length.
            -Positioning of the saw head and movement of the feeder using a joystick.
            -Automatic detection of the cutting start position.
            -Hand-operated strap tension control with indication on the display by means of
            an electronic converter.
            -Automatic monitoring of the cutting load through a servo valve mounted
            directly on the cylinder.
            -The coolant pan (equipped with 2 electric pumps for lubrication and cooling of
            the saw band) is built into the underframe
            -The chip drawer can be replaced by a motorized chip conveyor - see special
            accessories.
            -Preparation for the installation of the OPTIONAL minimum quantity lubrication
            system in addition to the conventional standard lubrication with emulsion oil.
            -Schipping brush.
            -Bimetal saw band for solid and profile material.
            -Tool and instructions for use with list of spare parts.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw FEMI N 251 DA XL


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2170002 · Band Saw

          FEMI - N 251 DA XL - - NEU -

          Technical details
          cutting diameter 225 mm︱saw band length 2480 mm︱cutting width 250 mm︱cutting speed 45 / 90 m/min︱dimensions of saw-band 2480 x 27 x 0,9 mm︱capacity 45 degrees: flat 135 x 185 - 145 x 150 mm︱capacity 45 degrees: round 150 mm︱capacity 45 degrees: square 145 mm︱capacity 60 degrees: flat 63 x 107 - 69 x 90 mm︱capacity 60 degrees: round 70 mm︱capacity 60 degrees: square 70 mm︱capacity 90 degrees: flat 240 x 160 - 250 x 110 mm︱capacity 90 degrees: round 225 mm︱capacity 90 degrees: square 185 mm︱total power requirement 0,75 / 1,1 kW︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 1385 x 580 x 890 mm︱
          Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control
            cutting diameter 225 mm
            saw band length 2480 mm
            cutting width 250 mm
            cutting speed 45 / 90 m/min
            dimensions of saw-band 2480 x 27 x 0,9 mm
            capacity 45 degrees: flat 135 x 185 - 145 x 150 mm
            capacity 45 degrees: round 150 mm
            capacity 45 degrees: square 145 mm
            capacity 60 degrees: flat 63 x 107 - 69 x 90 mm
            capacity 60 degrees: round 70 mm
            capacity 60 degrees: square 70 mm
            capacity 90 degrees: flat 240 x 160 - 250 x 110 mm
            capacity 90 degrees: round 225 mm
            capacity 90 degrees: square 185 mm
            total power requirement 0,75 / 1,1 kW
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 1385 x 580 x 890 mm
            Description :
            Technical features:
            - Hydraulic head descent control system
            - End stop at the end of the cut
            - Powerful three-phase induction motor with 2 speeds and
            Transmission with oil bath
            - Saw frame, vice and swivel group made of cast steel
            - Steel blade guide with ball bearings
            - Vice with quick clamping
            - Lever integrated on the front for locking the miter adjustment
            - Coolant pump with aluminum body
            - Large hand wheel for easy saw blade tension
            - Pressure gauge to show the belt tension (600-1000 kg/cm3)
            - Emergency stop safety switch
            - Swarf brush for cleaning the saw blade

            STANDARD EQUIPMENT:
            - Mountable base cabinet
            - coolant tank
            - Electric coolant pump
            - Length stop for serial cuts
            - Band change and settings tools
            - Chip removal brush
            - Hydraulic cylinder with feed control


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw FEMI N257 DADG


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7246 · Band Saw

          FEMI - N257 DADG - - NEU -

          Technical details
          cutting diameter 225 mm︱saw band length 2480 mm︱cutting width 253 mm︱ 2480 x 27 x 0,9 mm︱ 45 / 90 m/min︱ 225 mm︱ 180 mm︱ 245 x 148 / 253 x 70 mm︱ 90 mm︱ 85 x 115 mm︱ 90 mm︱ links 148 / rechts 140 mm︱ li 132 x 180 /re 90 x 180 mm︱ links 140 / rechts 120 mm︱ 1,1 kW︱ 0,2 t︱
          Technical features: - Powerful three-phase motor (400 V.) with oil transmission - Saw frame, vice and machine bed made of cast steel - Saw feed system with hydraulic cylinder and infinitely variable adjustment descent - Saw band guides made of steel + ball bearings - Vice with quick-release lever, can be moved from right to left Double miter cuts (-45° to +60°) - Lever integrated into the base for miter adjustment - Electric coolant pump with aluminum body¢¢Pressure gauge to display the correct belt tension (600-1000 kg/cm3) STANDARD EQUIPMENT: - mountable base frame - Coolant tank - electric coolant pump - Length stop for series cuts - Tools for band changing and adjustments - Chip clearing brush - Hydraulic cylinder with stepless regulation for cutting
            cutting diameter 225 mm
            saw band length 2480 mm
            cutting width 253 mm
            2480 x 27 x 0,9 mm
            45 / 90 m/min
            225 mm
            180 mm
            245 x 148 / 253 x 70 mm
            90 mm
            85 x 115 mm
            90 mm
            links 148 / rechts 140 mm
            li 132 x 180 /re 90 x 180 mm
            links 140 / rechts 120 mm
            1,1 kW
            0,2 t
            Description :
            Technical features:
            - Powerful three-phase motor (400 V.) with oil transmission
            - Saw frame, vice and machine bed made of cast steel
            - Saw feed system with hydraulic cylinder and infinitely variable adjustment
            descent
            - Saw band guides made of steel + ball bearings
            - Vice with quick-release lever, can be moved from right to left
            Double miter cuts (-45° to +60°)
            - Lever integrated into the base for miter adjustment
            - Electric coolant pump with aluminum body¢¢Pressure gauge to display the
            correct belt tension (600-1000 kg/cm3)

            STANDARD EQUIPMENT:
            - mountable base frame
            - Coolant tank
            - electric coolant pump
            - Length stop for series cuts
            - Tools for band changing and adjustments
            - Chip clearing brush
            - Hydraulic cylinder with stepless regulation for cutting


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   


          Saws for every imaginable project at LagerMaschinen
          Saws offer efficiency, accuracy and versatility.

          Saws have stood the text of time as some of the most functional tools for the cutting and shaping of materials. Saws can be used on a huge range of materials and, depending on the type of saw, can offer users extreme efficiency or optimal precision. From handheld equipment to large scale machinery, from manually operated machines to CNC saws, you can find the best selection of saws and more at LagerMaschinen, your online marketplace for used machines.

          Saws are a smart investment for home or business

          Saws are invaluable tools in a wide variety of different fields. The automotive, paper production, furniture manufacturing and construction industries are just a handful of examples of the importance of saws in everyday life. Whether you use manually operated saws for home projects are large-scale equipment for industrial manufacturing, finding good used saws at a reasonable price may seem overwhelming, but visiting the user-friendly platform at LagerMaschinen takes the hassle out of shopping for used machines.

          Used machines at your fingertips at LagerMaschinen

          If you want to save yourself time and money, consider purchasing your next piece of used machinery online at LagerMaschinen. Shopping online for used machines has a number of advantages. Firstly, you can browse for equipment like saws, drills, presses, etc. from the comfort of your home or office, anytime day or night. Secondly, you can sort your results by model, size, price or location, making it easy to find just what you need for any project. Visit LagerMaschinen and see how easy buying online can be.