,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Four Column Press - Hydraulic

          Machinelist: Four Column Press - Hydraulic


          Four Column Press - Hydraulic

          used Presses Four Column Press - Hydraulic R+S Technik


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06135 · Four Column Press - Hydraulic

          R+S Technik - - - 2013 -

          Technical details
          pressure 200 t︱table surface area 2100 x 1400 mm︱passage width 2122 mm︱total power requirement 60 kW︱weight of the machine ca. 35 t︱dimensions of the machine ca. m︱
          Press/punch with injection molding unit 200 ton punch upstroke press with injection molding machine (400to) Additional guard locking via 4 power strokes Manufacturer: R+S Technik Year of construction: 2013 / rebuild 2016 Mains voltage/frequency: 400V/50Hz 3~(N/PE Connected load: 60KW Weight about 35000kg
            pressure 200 t
            table surface area 2100 x 1400 mm
            passage width 2122 mm
            total power requirement 60 kW
            weight of the machine ca. 35 t
            Description :
            Press/punch with injection molding unit

            200 ton punch upstroke press with injection molding machine (400to)
            Additional guard locking via 4 power strokes
            Manufacturer: R+S Technik
            Year of construction: 2013 / rebuild 2016
            Mains voltage/frequency: 400V/50Hz 3~(N/PE
            Connected load: 60KW
            Weight about 35000kg


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic RASTER ZEULENRODA GHP 400 H/K - 08


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0453 · Four Column Press - Hydraulic

          RASTER ZEULENRODA - GHP 400 H/K - 08 - - 2001 -

          Technical details
          Capacity 400 t︱Stroke 600 mm︱Daylight 900 mm︱Table surface area 2000 x 1500 mm︱Working speed 0 - 10 mm / s︱Return speed 20 mm / s︱Oil volume 350 l︱Height over floor approx. 3900 mm︱Dimensions L x W x H 2650 x 1600 x 3900 mm︱Weight of machine approx. 32 t︱
            Capacity 400 t
            Stroke 600 mm
            Daylight 900 mm
            Table surface area 2000 x 1500 mm
            Working speed 0 - 10 mm / s
            Return speed 20 mm / s
            Oil volume 350 l
            Height over floor approx. 3900 mm
            Dimensions L x W x H 2650 x 1600 x 3900 mm
            Weight of machine approx. 32 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic Woeste HSPZ 630


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15607 · Four Column Press - Hydraulic

          Woeste - HSPZ 630 - - 1999 -

          Technical details
          pressure 630 t︱passage width 1390 mm︱stroke 400 mm︱table surface area 1390x1250 mm︱total power requirement 75 kW︱weight of the machine ca. 36 t︱dimensions of the machine ca. BxTxH 3200x2800x4000 mm︱
            pressure 630 t
            passage width 1390 mm
            stroke 400 mm
            table surface area 1390x1250 mm
            total power requirement 75 kW
            weight of the machine ca. 36 t
            dimensions of the machine ca. BxTxH 3200x2800x4000 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic HOCHSTEIN PPPG 300


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15631 · Four Column Press - Hydraulic

          HOCHSTEIN - PPPG 300 - - 1992 -

          Technical details
          pressure 300 t︱passage width 1350 mm︱stroke 500 mm︱column travel -side 830 mm︱table surface area 1350x1380 (1870x1380) mm︱table height 1060 mm︱total power requirement 45 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. BxTxH 2500x2000x3950 mm︱
            pressure 300 t
            passage width 1350 mm
            stroke 500 mm
            column travel -side 830 mm
            table surface area 1350x1380 (1870x1380) mm
            table height 1060 mm
            total power requirement 45 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. BxTxH 2500x2000x3950 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic CARONNO POC 650-1


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02463 · Four Column Press - Hydraulic

          CARONNO - POC 650-1 - - 1991 -

          Technical details
          pressure 650 t︱passage width 920 mm︱stroke 1750 mm︱Table area 2000x1500 mm︱ram surface 2000x1500 mm︱dayligth 2100 mm︱light-barrier ︱hydraulic 203 bar︱closing speed 500 mm/sec︱pressing speed 0,5-10,4 mm/sec︱hole in plunger diameter/depth mm︱opening speed 250 mm/250︱ejector ︱return capacity 150 t︱total power requirement 75 kW︱weight of the machine ca. 47 t︱dimensions of the machine ca. 4,4x2,5x7,5 m︱
          max pressure 250 bar 800 t impact shock dampening dissolution rate from 0.5 to 66.4 mm / sec
            pressure 650 t
            passage width 920 mm
            stroke 1750 mm
            Table area 2000x1500 mm
            ram surface 2000x1500 mm
            dayligth 2100 mm
            hydraulic 203 bar
            closing speed 500 mm/sec
            pressing speed 0,5-10,4 mm/sec
            opening speed 250 mm/250
            return capacity 150 t
            total power requirement 75 kW
            weight of the machine ca. 47 t
            dimensions of the machine ca. 4,4x2,5x7,5 m
            Description :
            max pressure 250 bar 800 t
            impact shock dampening
            dissolution rate from 0.5 to 66.4 mm / sec


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic HOCHSTEIN PP 100 / 40


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15318 · Four Column Press - Hydraulic

          HOCHSTEIN - PP 100 / 40 - - 1991 -

          Technical details
          pressure 100 t︱passage width 810 mm︱stroke 400 mm︱table surface area 1140x740 mm︱ram surface 1140x740 mm︱dayligth 670 mm︱weight of the machine ca. 8 t︱dimensions of the machine ca. 1800x1800x3000 mm︱
            pressure 100 t
            passage width 810 mm
            stroke 400 mm
            table surface area 1140x740 mm
            ram surface 1140x740 mm
            dayligth 670 mm
            weight of the machine ca. 8 t
            dimensions of the machine ca. 1800x1800x3000 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic HOCHSTEIN PPG 150


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15604 · Four Column Press - Hydraulic

          HOCHSTEIN - PPG 150 - - 1991 -

          Technical details
          pressure 150 t︱passage width 1100 mm︱stroke 500 mm︱table surface area 1100x1070 mm︱ram surface 1100x1070 mm︱hole in the table 475x450 mm︱table height 920 mm︱dayligth 800 mm︱weight of the machine ca. 8 t︱dimensions of the machine ca. BxTxH 2000x2000x3600 mm︱
            pressure 150 t
            passage width 1100 mm
            stroke 500 mm
            table surface area 1100x1070 mm
            ram surface 1100x1070 mm
            hole in the table 475x450 mm
            table height 920 mm
            dayligth 800 mm
            weight of the machine ca. 8 t
            dimensions of the machine ca. BxTxH 2000x2000x3600 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic Battenfeld			 BP200


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PE346 · Four Column Press - Hydraulic

          Battenfeld - BP200 - - 1987 -

          Technical details
          Capacity 30 T︱Machine dimensions (lxwxh) - mm︱Machine weight - kg︱Control ︱Table length mm︱passage width mm︱stroke mm︱Table width mm︱Stroke mm︱Daylight mm︱Press speed mm/sec︱Vulcanizer ︱Hydraulically driven
          Vulcanizer Capacity: 30 T 3 x 380/220 V With special mold to press helmets
            Capacity 30 T
            Machine dimensions (lxwxh) - mm
            Machine weight - kg
            Description :
            Vulcanizer
            Capacity: 30 T
            3 x 380/220 V
            With special mold to press helmets




        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic EXNER H4SP 150 F


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030203 · Four Column Press - Hydraulic

          EXNER - H4SP 150 F - - 1986 -

          Technical details
          pressure 150 t︱quantity of oil 480 l︱tracking travel 30 mm︱safety distance 180 mm︱total power requirement 18,5 kW︱weight of the machine ca. 4200 kg︱
            pressure 150 t
            quantity of oil 480 l
            tracking travel 30 mm
            safety distance 180 mm
            total power requirement 18,5 kW
            weight of the machine ca. 4200 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic EXNER H4SP 300


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030202 · Four Column Press - Hydraulic

          EXNER - H4SP 300 - - 1978 -

          Technical details
          pressure 300 t︱stroke 450 mm︱tracking travel 26 mm︱safety distance 130 mm︱Table dimensions 900x600 mm︱weight of the machine ca. 3500-4000 kg︱
            pressure 300 t
            stroke 450 mm
            tracking travel 26 mm
            safety distance 130 mm
            Table dimensions 900x600 mm
            weight of the machine ca. 3500-4000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic EXNER H 4 SP-200


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-503510 · Four Column Press - Hydraulic

          EXNER - H 4 SP-200 - - 1971 -

          Technical details
          pressure 200 t︱passage width NA mm︱stroke 180 mm︱table length 690 mm︱table width 530 mm︱distance between columns 420 mm︱total power requirement 18 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Hydr. 4-Pillar Press for Embossing/Calibration
            pressure 200 t
            passage width NA mm
            stroke 180 mm
            table length 690 mm
            table width 530 mm
            distance between columns 420 mm
            total power requirement 18 kW
            Description :
            Hydr. 4-Pillar Press for Embossing/Calibration


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03147 · Four Column Press - Hydraulic

          - - - -

          Technical details
          pressure 100 t︱passage width 1000 mm︱stroke 700 mm︱width 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            pressure 100 t
            passage width 1000 mm
            stroke 700 mm
            width 800 mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic Stenhoj		 50.635


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PE330 · Four Column Press - Hydraulic

          Stenhoj - 50.635 - - -

          Technical details
          Capacity 60 T︱Table length 2000 mm︱stroke 400 mm︱Table width 2000 mm︱Press speed 20 mm/sec︱Machine dimensions (lxwxh) 2500 x 2000 x 2450 mm︱Machine weight 6800 kg︱
          Hydraulically driven
            Capacity 60 T
            Table length 2000 mm
            stroke 400 mm
            Table width 2000 mm
            Press speed 20 mm/sec
            Machine dimensions (lxwxh) 2500 x 2000 x 2450 mm
            Machine weight 6800 kg
            Description :
            Hydraulically driven


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic DIEFFENBACHER PU5 330A


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-33 · Four Column Press - Hydraulic

          DIEFFENBACHER - PU5 330A - - -

          Technical details
          ︱passage width 1500 mm︱ ︱total power requirement kW︱weight of the machine ca. 18 t︱required space m︱
          Capacity 300 Ton Table size 1.500 x 1.500 mm Adjustable stroke 500 - 1.000 mm Piston ø 400 mm Distance table -> ram: Minimum: 500 mm Maximal: 1.500 mm Machine height 4.000 mm Under ground 1.000 mm Above ground 3.000 mm Machine weight 18.600 kg
            passage width 1500 mm
            weight of the machine ca. 18 t
            Description :
            Capacity 300 Ton
            Table size 1.500 x 1.500 mm
            Adjustable stroke 500 - 1.000 mm
            Piston ø 400 mm

            Distance table -> ram:
            Minimum: 500 mm
            Maximal: 1.500 mm

            Machine height 4.000 mm
            Under ground 1.000 mm
            Above ground 3.000 mm
            Machine weight 18.600 kg


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic SLM


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PE291 · Four Column Press - Hydraulic

          SLM - - - -

          Technical details
          Capacity 150 T︱Stroke 150 mm︱Daylight 290 mm︱
          Distance between columns: 300 x 400 mm Hydraulic
            Capacity 150 T
            Stroke 150 mm
            Daylight 290 mm
            Description :
            Distance between columns: 300 x 400 mm
            Hydraulic



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic SICMI PSQ 100 A


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-336 · Four Column Press - Hydraulic

          SICMI - PSQ 100 A - - -

          Technical details
          neuca. 4 Monate ab AuftragseItalien74800 €︱ 1503.48 €︱ 100 to︱ 500 mm︱ 1000x800 mm︱ 600 mm︱ 26 mm/s︱ 5 mm/s︱ 4 kW︱ 1260 mm︱ 1060 mm︱ 2400 mm︱
          4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request
            neu
            ca. 4 Monate ab Auftragse
            Italien
            74800 €
            1503.48 €
            100 to
            500 mm
            1000x800 mm
            600 mm
            26 mm/s
            5 mm/s
            4 kW
            1260 mm
            1060 mm
            2400 mm
            Description :
            4-pillar guide
            ram guide round
            table and ram with T-slots
            2 hand operation
            Siemens PLC
            manometer
            users manual

            Light barrier

            on Request

            Siemens touchscreen-control, 50 programsstoreable, for programming:

            • Upstroke and downstroke quota
            • Break time in the bottom
            • time of Decompression
            • setting pressure of work
            • Pieces counter
            • prestop in upstroke and downstroke
            • setting for movement in manual and in automatic
            • management of alarms and anomalies


            on Request

            Working hour counter

            on Request

            Stroke counter

            on Request

            Decompression valve

            on Request

            Oil cooler with decompreission valve

            on Request

            Pressur switch

            on Request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic SICMI PSQ 150 A


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-338 · Four Column Press - Hydraulic

          SICMI - PSQ 150 A - - -

          Technical details
          neuca. 4 Monate ab AuftragseItalien103500 €︱ 2059.65 €︱ 150 to︱ 500 mm︱ 1250x1000 mm︱ 600 mm︱ 23 mm/s︱ 4 mm/s︱ 5.5 kW︱ 1520 mm︱ 1270 mm︱ 2500 mm︱
          4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request
            neu
            ca. 4 Monate ab Auftragse
            Italien
            103500 €
            2059.65 €
            150 to
            500 mm
            1250x1000 mm
            600 mm
            23 mm/s
            4 mm/s
            5.5 kW
            1520 mm
            1270 mm
            2500 mm
            Description :
            4-pillar guide
            ram guide round
            table and ram with T-slots
            2 hand operation
            Siemens PLC
            manometer
            users manual

            Light barrier

            on Request

            Siemens touchscreen-control, 50 programsstoreable, for programming:

            • Upstroke and downstroke quota
            • Break time in the bottom
            • time of Decompression
            • setting pressure of work
            • Pieces counter
            • prestop in upstroke and downstroke
            • setting for movement in manual and in automatic
            • management of alarms and anomalies


            on Request

            Working hour counter

            on Request

            Stroke counter

            on Request

            Decompression valve

            on Request

            Oil cooler with decompreission valve

            on Request

            Pressur switch

            on Request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Presses Four Column Press - Hydraulic SICMI PSQ 70 A


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-334 · Four Column Press - Hydraulic

          SICMI - PSQ 70 A - - -

          Technical details
          neuca. 4 Monate ab AuftragseItalien63500 €︱ 1276.35 €︱ 70 to︱ 500 mm︱ 900x700 mm︱ 600 mm︱ 25 mm/s︱ 6 mm/s︱ 4 kW︱ 1140 mm︱ 940 mm︱ 2350 mm︱
          4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request
            neu
            ca. 4 Monate ab Auftragse
            Italien
            63500 €
            1276.35 €
            70 to
            500 mm
            900x700 mm
            600 mm
            25 mm/s
            6 mm/s
            4 kW
            1140 mm
            940 mm
            2350 mm
            Description :
            4-pillar guide
            ram guide round
            table and ram with T-slots
            2 hand operation
            Siemens PLC
            manometer
            users manual

            Light barrier

            on Request

            Siemens touchscreen-control, 50 programsstoreable, for programming:

            • Upstroke and downstroke quota
            • Break time in the bottom
            • time of Decompression
            • setting pressure of work
            • Pieces counter
            • prestop in upstroke and downstroke
            • setting for movement in manual and in automatic
            • management of alarms and anomalies


            on Request

            Working hour counter

            on Request

            Stroke counter

            on Request

            Decompression valve

            on Request

            Oil cooler with decompreission valve

            on Request

            Pressur switch

            on Request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact

          Single Column Press - Hydraulic

          used Presses Single Column Press - Hydraulic HANNIFIN F20-21N


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-41230 · Single Column Press - Hydraulic

          HANNIFIN - F20-21N - - unbek. -

          Technical details
          pressure 2 t︱throat 150 mm︱stroke 150 mm︱distance table/ram, max. stroke up, adjustment up mm︱table surface area 310 x 250 mm︱hole in the table mm︱table height over floor mm︱power requirement 2,0 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 1,2 x 0,8 x 1,7 m︱
          Single column press - with table base - various press accessories
            pressure 2 t
            throat 150 mm
            stroke 150 mm
            table surface area 310 x 250 mm
            power requirement 2,0 kW
            weight of the machine ca. 0,6 t
            dimensions of the machine ca. 1,2 x 0,8 x 1,7 m
            Description :
            Single column press
            - with table base
            - various press accessories


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic RHTC PPC 28


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7346 · Single Column Press - Hydraulic

          RHTC - PPC 28 - - 2021 (NEU) -

          Technical details
          pressure 28 t︱throat 225 mm︱stroke 150 mm︱table surface area 325 x 300 mm︱work speed 2 - 9,8 mm/sek︱return speed 12,8 mm/sek︱total power requirement 4 kW︱weight of the machine ca. 650 kg︱dimensions of the machine ca. 1800 x 900 x 2000 mm︱
          - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools
            pressure 28 t
            throat 225 mm
            stroke 150 mm
            table surface area 325 x 300 mm
            work speed 2 - 9,8 mm/sek
            return speed 12,8 mm/sek
            total power requirement 4 kW
            weight of the machine ca. 650 kg
            dimensions of the machine ca. 1800 x 900 x 2000 mm
            Description :
            - NC control to adjust the piston stroke
            - Selector switch for manual or semi-automatic operation
            - Flow control valve and pressure control valve
            - Integrated pressure gauge
            - Various tools can be installed on the piston - inside
            There is a 40 mm hole for attaching the tools


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic NEFF CHS 160 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103044 · Single Column Press - Hydraulic

          NEFF - CHS 160 (UVV) - - 2020 - Siemens S7-1500F

          Technical details
          pressure 160 t︱throat 350 mm︱stroke 140 mm︱dayligth 370 mm︱table surface area 750 x 620 mm︱hole in the table 220 mm︱table height over floor 850 mm︱ram surface 750 x 580 mm︱oil volume 700 l︱feed down 300 mm/sec︱feed up 480 mm/sec︱feed under pressure 58 mm/sec︱total power requirement 60 kW︱weight of the machine ca. 10,8 t︱required space 2,4 x 1,8 x 3,5 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable two-hand operation 2020: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Design of the electrical control according to DIN EN ISO 16092-1/-2/-3 year of manufacture 1995
            pressure 160 t
            throat 350 mm
            stroke 140 mm
            dayligth 370 mm
            table surface area 750 x 620 mm
            hole in the table 220 mm
            table height over floor 850 mm
            ram surface 750 x 580 mm
            oil volume 700 l
            feed down 300 mm/sec
            feed up 480 mm/sec
            feed under pressure 58 mm/sec
            total power requirement 60 kW
            weight of the machine ca. 10,8 t
            required space 2,4 x 1,8 x 3,5 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable two-hand operation
            2020: new electrical (safety) control - Siemens S7-1500 F,
            easy operation via touch-panel
            Design of the electrical control according to DIN EN ISO 16092-1/-2/-3
            year of manufacture 1995


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic OMERA OPI-25C


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12318 · Single Column Press - Hydraulic

          OMERA - OPI-25C - - 2001 -

          Technical details
          pressure 25 t︱throat 300 mm︱stroke 400 mm︱Number of working hours 1235 h︱table-size 650 x 500 mm︱ram surface 550 x 450 mm︱dayligth 700 mm︱rapid traverse - down 500 mm/sec︱work speed 27 - 72 mm/sec︱rapid traverse - up 410 mm/sec︱quantity of oil 230 l︱die cushion capacity 125 kN︱die cushion stroke 200 mm︱capacity of ejector 8 kN︱ejector stroke 150 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 1,3 x 1,6 x 2,8 m︱Electric 400 Volt ︱Light barrier in front
          Little used (only 1235 hours!) hydraulic single column press, power 25 t with Pilz safety control, ejector, light barrier and 2-manual operation. Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017. There is a small one in the piston rod of the cylinder Ejector cylinder integrated, which is controlled single-acting. The return stroke of the ejector takes place without force due to thesubsequent stroke of the Press cylinder. Machine intended for optionally retrofittable die cushion. Machine free due to production change. It comes from a large company and has been constantly maintained and kept up to date. Machine dealer with own stock of 1600 m²
            pressure 25 t
            throat 300 mm
            stroke 400 mm
            Number of working hours 1235 h
            table-size 650 x 500 mm
            ram surface 550 x 450 mm
            dayligth 700 mm
            rapid traverse - down 500 mm/sec
            work speed 27 - 72 mm/sec
            rapid traverse - up 410 mm/sec
            quantity of oil 230 l
            die cushion capacity 125 kN
            die cushion stroke 200 mm
            capacity of ejector 8 kN
            ejector stroke 150 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 1,3 x 1,6 x 2,8 m
            Description :
            Little used (only 1235 hours!) hydraulic single column press, power 25 t with
            Pilz safety control, ejector, light barrier and 2-manual operation.
            Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017.
            There is a small one in the piston rod of the cylinder Ejector cylinder
            integrated, which is controlled single-acting. The return stroke of the
            ejector takes place without force due to thesubsequent stroke of the
            Press cylinder. Machine intended for optionally retrofittable die cushion.
            Machine free due to production change. It comes from a large company and has
            been constantly maintained and kept up to date.
            Machine dealer with own stock of 1600 m²



        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic EXNER EEX 25


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233012 · Single Column Press - Hydraulic

          EXNER - EEX 25 - - 2000 - Siemens S 5

          Technical details
          pressure 25 t︱stroke 150 mm︱throat 420 mm︱dayligth 450 mm︱table surface area 700 x 820 mm︱table height over floor 850 mm︱ram surface 600 x 600 mm︱feed down 370 mm/s︱feed up 370 mm/s︱working feed 18 - 33 mm/s︱oil volume 300 l︱power requirement 5,5 kW︱Weight 5,8 t︱dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation
            pressure 25 t
            stroke 150 mm
            throat 420 mm
            dayligth 450 mm
            table surface area 700 x 820 mm
            table height over floor 850 mm
            ram surface 600 x 600 mm
            feed down 370 mm/s
            feed up 370 mm/s
            working feed 18 - 33 mm/s
            oil volume 300 l
            power requirement 5,5 kW
            Weight 5,8 t
            dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZT 10


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024018 · Single Column Press - Hydraulic

          DUNKES - HZT 10 - - 2000 -

          Technical details
          Pressing force 10 t︱oil pressure max. in the work cylinder 310 bar︱engine output 3 kW︱tracking travel 70 ms 8 mm︱weight 1650 kg︱
            Pressing force 10 t
            oil pressure max. in the work cy. 310 bar
            engine output 3 kW
            tracking travel 70 ms 8 mm
            weight 1650 kg


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

          TOP Manufacturer:

          HOCHSTEIN - SICMI - WOESTE - - CARONNO -