,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Plate Shear - Hydraulic

          Machinelist: Plate Shear - Hydraulic


          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK HGS-A 3100x8


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011213 · Plate Shear - Hydraulic

          ERMAK - HGS-A 3100x8 - - 2013 -

          Technical details
          sheet width 3100 mm︱plate thickness 8 mm︱voltage 380 V︱oil volume 200 l︱total power requirement 15 kW︱weight of the machine ca. 6600 kg︱dimensions 4025x2075x1800 mm︱
            sheet width 3100 mm
            plate thickness 8 mm
            voltage 380 V
            oil volume 200 l
            total power requirement 15 kW
            weight of the machine ca. 6600 kg
            dimensions 4025x2075x1800 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA SB 3010 NT


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325267 · Plate Shear - Hydraulic

          DURMA - SB 3010 NT - - 2011 - ENC 100M

          Technical details
          sheet width 3100 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱no. of strokes 13 Hub/min︱cutting angle 1°50 ︱control ENC 100M ︱table width 580 mm︱throat 50,0 mm︱total power requirement 22,0 KW︱weight 9300 kg︱range L-W-H 4200 x 2250 x 2100 mm︱
          ** from a maintenance workshop ** New price ~ 55.000 euros -------------------------------------------------- robust electro-hydraulic oscillating shears * with DURMA ENC 100M NC control * Manual cutting gap adjustment, via eccentric -------------------------------------------------- Furnishing: - electro-hydraulic oscillating shears - with DURMA ENC 100M control * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * Swivel control, left front - motorized backgauge, travel = 1.000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - Manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x side stop 1.500 mm - 2x front support arms 1.000 mm - Ball transfer units in the front support table - hinged finger guard, with safety switch - Light barrier behind the machine (safety device) - free-moving footswitch - CE mark/Declaration of Conformity
            sheet width 3100 mm
            plate thickness 10,0 mm
            thickness at "Niro-steel" 6,0 mm
            distance between columns 3120 mm
            down holder 16 Stück
            oil volume 200 ltr.
            no. of strokes 13 Hub/min
            cutting angle 1°50
            control ENC 100M
            table width 580 mm
            throat 50,0 mm
            total power requirement 22,0 KW
            weight 9300 kg
            range L-W-H 4200 x 2250 x 2100 mm
            Description :
            ** from a maintenance workshop
            ** New price ~ 55.000 euros

            --------------------------------------------------
            robust electro-hydraulic oscillating shears
            * with DURMA ENC 100M NC control
            * Manual cutting gap adjustment, via eccentric
            --------------------------------------------------

            Furnishing:
            - electro-hydraulic oscillating shears
            - with DURMA ENC 100M control
            * Backgauge preselection - X axis
            * Number of pieces
            * Cutting length limitation
            * Swivel control, left front
            - motorized backgauge, travel = 1.000 mm (X axis)
            * on ball screws
            * Travel speed 200 mm/sec.
            - Manual cutting gap adjustment, via eccentric adjustment
            - hydraulic hold-down devices
            - 1x side stop 1.500 mm
            - 2x front support arms 1.000 mm
            - Ball transfer units in the front support table
            - hinged finger guard, with safety switch
            - Light barrier behind the machine (safety device)
            - free-moving footswitch
            - CE mark/Declaration of Conformity


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA SB 3010 NT


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94084 · Plate Shear - Hydraulic

          DURMA - SB 3010 NT - - 2011 - ENC 100M

          Technical details
          sheet width 3100 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱no. of strokes 13 Hub/min︱cutting angle 1°50 ︱control ENC 100M ︱table width 580 mm︱throat 50,0 mm︱total power requirement 22,0 KW︱weight 9300 kg︱range L-W-H 4200 x 2250 x 2100 mm︱
          ** from a maintenance workshop ** New price ~ 55.000 euros -------------------------------------------------- robust electro-hydraulic oscillating shears * with DURMA ENC 100M NC control * Manual cutting gap adjustment, via eccentric -------------------------------------------------- Furnishing: - electro-hydraulic oscillating shears - with DURMA ENC 100M control * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * Swivel control, left front - motorized backgauge, travel = 1.000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - Manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x side stop 1.500 mm - 2x front support arms 1.000 mm - Ball transfer units in the front support table - hinged finger guard, with safety switch - Light barrier behind the machine (safety device) - free-moving footswitch - CE mark/Declaration of Conformity
            sheet width 3100 mm
            plate thickness 10,00 mm
            thickness at "Niro-steel" 6,00 mm
            distance between columns 3120 mm
            down holder 16 Stück
            oil volume 200 ltr.
            no. of strokes 13 Hub/min
            cutting angle 1°50
            control ENC 100M
            table width 580 mm
            throat 50,0 mm
            total power requirement 22,0 KW
            weight 9300 kg
            range L-W-H 4200 x 2250 x 2100 mm
            Description :
            ** from a maintenance workshop
            ** New price ~ 55.000 euros

            --------------------------------------------------
            robust electro-hydraulic oscillating shears
            * with DURMA ENC 100M NC control
            * Manual cutting gap adjustment, via eccentric
            --------------------------------------------------

            Furnishing:
            - electro-hydraulic oscillating shears
            - with DURMA ENC 100M control
            * Backgauge preselection - X axis
            * Number of pieces
            * Cutting length limitation
            * Swivel control, left front
            - motorized backgauge, travel = 1.000 mm (X axis)
            * on ball screws
            * Travel speed 200 mm/sec.
            - Manual cutting gap adjustment, via eccentric adjustment
            - hydraulic hold-down devices
            - 1x side stop 1.500 mm
            - 2x front support arms 1.000 mm
            - Ball transfer units in the front support table
            - hinged finger guard, with safety switch
            - Light barrier behind the machine (safety device)
            - free-moving footswitch
            - CE mark/Declaration of Conformity


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HOCHSTRATE 3000/6


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94045 · Plate Shear - Hydraulic

          HOCHSTRATE - 3000/6 - - 2011 -

          Technical details
          sheet width 3000 mm︱plate thickness 6,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 8,00 t︱dimensions of the machine ca. 4,65 x 2,85 x 1,79 m︱
          • Controlled backgauge • Angle stop • Support arms • Hold-up device • Including foot switch • Touchscreen controls • Light barrier for rear area
            sheet width 3000 mm
            plate thickness 6,00 mm
            weight of the machine ca. 8,00 t
            dimensions of the machine ca. 4,65 x 2,85 x 1,79 m
            Description :
            • Controlled backgauge
            • Angle stop
            • Support arms
            • Hold-up device
            • Including foot switch
            • Touchscreen controls
            • Light barrier for rear area


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HAINAN GREAT HSS11Y-3200x6


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010994 · Plate Shear - Hydraulic

          HAINAN GREAT - HSS11Y-3200x6 - - 2010 -

          Technical details
          sheet width 3200 mm︱plate thickness 6 mm︱cutting angle 0,5 - 1°30' ︱no. of strokes 14 Hub/min︱work height max. 800 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6.600 kg︱dimensions of the machine ca. 3800x1900x1950 mm︱
            sheet width 3200 mm
            plate thickness 6 mm
            cutting angle 0,5 - 1°30'
            no. of strokes 14 Hub/min
            work height max. 800 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6.600 kg
            dimensions of the machine ca. 3800x1900x1950 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RAS POWERcut2 86.33-2


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03231 · Plate Shear - Hydraulic

          RAS - POWERcut2 86.33-2 - - 2009 - RAS System 2005

          Technical details
          sheet width 3190 mm︱plate thickness 6,3 mm︱distance between columns 3200 mm︱Rear feed width 5-1000 mm︱strokes per minute 30 - 50 ︱cutting angle 1,2 °︱control RAS System 2005 ︱dimensions of the machine ca. 3,83 x 3,82 m︱
          Equipment / Accessories: - small parts diverter - automatic cutting gap adjustment - scrap separation - return-to-sender - cutting technology: swing cut - documentation
            sheet width 3190 mm
            plate thickness 6,3 mm
            distance between columns 3200 mm
            Rear feed width 5-1000 mm
            strokes per minute 30 - 50
            cutting angle 1,2 °
            control RAS System 2005
            dimensions of the machine ca. 3,83 x 3,82 m
            Description :
            Equipment / Accessories:
            - small parts diverter
            - automatic cutting gap adjustment
            - scrap separation
            - return-to-sender
            - cutting technology: swing cut
            - documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BERNARDO MTH 6 x 3200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011203 · Plate Shear - Hydraulic

          BERNARDO - MTH 6 x 3200 - - 2009 -

          Technical details
          sheet width 3200 mm︱plate thickness 6 mm︱dimensions 3700 x 2200 x 1700 mm︱machine weight ab. 6.600 kg︱
            sheet width 3200 mm
            plate thickness 6 mm
            dimensions 3700 x 2200 x 1700 mm
            machine weight ab. 6.600 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DERATECH PRACTICA PLUS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011185 · Plate Shear - Hydraulic

          DERATECH - PRACTICA PLUS - - 2009 -

          Technical details
          sheet width 4000 mm︱plate thickness 16 mm︱distance between columns mm︱weight of the machine ca. 19500 kg︱
            sheet width 4000 mm
            plate thickness 16 mm
            weight of the machine ca. 19500 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA SB 3006 NT HH


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325330 · Plate Shear - Hydraulic

          DURMA - SB 3006 NT HH - - 2008 - ENC 100

          Technical details
          sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱cutting angle 1° 30 ︱no. of strokes 15 Hub/min︱control ENC 100 ︱table width 500 mm︱throat 50.0 mm︱Number of working hours 912 h︱total power requirement 15.0 KW︱weight 7650 kg︱range L-W-H 3810 x 2200 x 2050 mm︱
          ** from a maintenance workshop (!!) ** very good / well-maintained condition (as new) ** with only 912 operating hours ** current new price ~ 45.000 euros ** Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear * with DURMA ENC 100M control * manual cutting gap adjustment * Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA "ENC 100M" NC control unit * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * swiveling operation, left front - electro-motorized back gauge, travel = 1,000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x front side stop .. 1.500 mm - 2x front support arms .. 1.500 mm - Ball rollers in the front support table - hinged finger protection, with safety switch - Light barrier behind the machine (safety device) - 1x freely movable foot switch - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325330
            sheet width 3100 mm
            plate thickness 6.0 mm
            thickness at "Niro-steel" 4.0 mm
            distance between columns 3120 mm
            down holder 16 Stück
            oil volume 200 ltr.
            cutting angle 1° 30
            no. of strokes 15 Hub/min
            control ENC 100
            table width 500 mm
            throat 50.0 mm
            Number of working hours 912 h
            total power requirement 15.0 KW
            weight 7650 kg
            range L-W-H 3810 x 2200 x 2050 mm
            Description :
            ** from a maintenance workshop (!!)
            ** very good / well-maintained condition (as new)
            ** with only 912 operating hours
            ** current new price ~ 45.000 euros
            ** Special price on request

            --------------------------------------------------
            NC electro-hydraulic swing cutting shear
            * with DURMA ENC 100M control
            * manual cutting gap adjustment
            * Incl. pneumatic sheet metal holding device for thin sheet metal cuts
            --------------------------------------------------

            Furnishing:
            - robust electro-hydraulic swing cutting shears
            - including DURMA "ENC 100M" NC control unit
            * Backgauge preselection - X axis
            * Number of pieces
            * Cutting length limitation
            * swiveling operation, left front
            - electro-motorized back gauge, travel = 1,000 mm (X axis)
            * on ball screws
            * Travel speed 200 mm/sec.
            - manual cutting gap adjustment, via eccentric adjustment
            - hydraulic hold-down devices
            - 1x front side stop .. 1.500 mm
            - 2x front support arms .. 1.500 mm
            - Ball rollers in the front support table
            - hinged finger protection, with safety switch
            - Light barrier behind the machine (safety device)
            - 1x freely movable foot switch
            - original instruction manual

            * Special accessories included:
            - pneumatic sheet metal holding device for thin sheet metal blanks

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325330


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA SB 3006 NT HH


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94163 · Plate Shear - Hydraulic

          DURMA - SB 3006 NT HH - - 2008 - ENC 100

          Technical details
          sheet width 3100 mm︱plate thickness 6,00 mm︱thickness at "Niro-steel" 4,00 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱cutting angle 1° 30 ︱no. of strokes 15 Hub/min︱control ENC 100 ︱table width 500 mm︱throat 50.0 mm︱Number of working hours 912 h︱total power requirement 15.0 KW︱weight 7650 kg︱range L-W-H 3810 x 2200 x 2050 mm︱
          ** from a maintenance workshop (!!) ** very good / well-maintained condition (as new) ** with only 912 operating hours ** current new price ~ 45.000 euros ** Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear * with DURMA ENC 100M control * manual cutting gap adjustment * Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA "ENC 100M" NC control unit * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * swiveling operation, left front - electro-motorized back gauge, travel = 1,000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x front side stop .. 1.500 mm - 2x front support arms .. 1.500 mm - Ball rollers in the front support table - hinged finger protection, with safety switch - Light barrier behind the machine (safety device) - 1x freely movable foot switch - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks
            sheet width 3100 mm
            plate thickness 6,00 mm
            thickness at "Niro-steel" 4,00 mm
            distance between columns 3120 mm
            down holder 16 Stück
            oil volume 200 ltr.
            cutting angle 1° 30
            no. of strokes 15 Hub/min
            control ENC 100
            table width 500 mm
            throat 50.0 mm
            Number of working hours 912 h
            total power requirement 15.0 KW
            weight 7650 kg
            range L-W-H 3810 x 2200 x 2050 mm
            Description :
            ** from a maintenance workshop (!!)
            ** very good / well-maintained condition (as new)
            ** with only 912 operating hours
            ** current new price ~ 45.000 euros
            ** Special price on request

            --------------------------------------------------
            NC electro-hydraulic swing cutting shear
            * with DURMA ENC 100M control
            * manual cutting gap adjustment
            * Incl. pneumatic sheet metal holding device for thin sheet metal cuts
            --------------------------------------------------

            Furnishing:
            - robust electro-hydraulic swing cutting shears
            - including DURMA "ENC 100M" NC control unit
            * Backgauge preselection - X axis
            * Number of pieces
            * Cutting length limitation
            * swiveling operation, left front
            - electro-motorized back gauge, travel = 1,000 mm (X axis)
            * on ball screws
            * Travel speed 200 mm/sec.
            - manual cutting gap adjustment, via eccentric adjustment
            - hydraulic hold-down devices
            - 1x front side stop .. 1.500 mm
            - 2x front support arms .. 1.500 mm
            - Ball rollers in the front support table
            - hinged finger protection, with safety switch
            - Light barrier behind the machine (safety device)
            - 1x freely movable foot switch
            - original instruction manual

            * Special accessories included:
            - pneumatic sheet metal holding device for thin sheet metal blanks




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic JMC 500


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S368 · Plate Shear - Hydraulic

          JMC - 500 - - 2008 -

          Technical details
          Knife length - mm︱Plate thickness - mm︱Machine weight 1143 kg︱blade length 500 mm︱machine 1.750 x 850 x 1.450 mm︱
          Year of make 2008 scissors Blade length 500 mm Hydraulic drive Machine size (lxwxh) 1.750 x 850 x 1.450 mm Machine weight 1143 kg
            Knife length - mm
            Plate thickness - mm
            Machine weight 1143 kg
            blade length 500 mm
            machine 1.750 x 850 x 1.450 mm
            Description :
            Year of make 2008
            scissors
            Blade length 500 mm
            Hydraulic drive
            Machine size (lxwxh) 1.750 x 850 x 1.450 mm
            Machine weight 1143 kg



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic TUMAC QC 6 x 3200


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3766 · Plate Shear - Hydraulic

          TUMAC - QC 6 x 3200 - - 2008 - eView

          Technical details
          sheet width 3200 mm︱plate thickness 6 mm︱distance between columns 3200 mm︱throat mm︱back stop - adjustable 20 - 600 mm︱down holder ︱dimensions ca. 4010 x 1610 x 1620 mm︱engine output 7,5 kW︱Control eView ︱weight of the machine ca. 7,2 t︱
          CNC swing cut panel shears 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available
            sheet width 3200 mm
            plate thickness 6 mm
            distance between columns 3200 mm
            back stop - adjustable 20 - 600 mm
            dimensions ca. 4010 x 1610 x 1620 mm
            engine output 7,5 kW
            Control eView
            weight of the machine ca. 7,2 t
            Description :
            CNC swing cut panel shears

            3 support arms and 1 angle stop
            Ball rollers in the table
            Operating instructions available


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HACO HSLX 3025


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94048 · Plate Shear - Hydraulic

          HACO - HSLX 3025 - - 2007 - SC 70

          Technical details
          sheet width 3020 mm︱plate thickness 25,00 mm︱no. of strokes 4 - 8 Hub/min︱back stop - adjustable ca. 1250 mm︱work height max. 1040 mm︱Control SC 70 ︱cutting angle 0,5 - 3,0 °︱down holder 18 Stück︱engine output 56,0 kW︱weight of the machine ca. 38.000 kg︱range L-W-H 4200 x 2600 x 2650 mm︱
          ** good condition - ready to use (!) ** New price ~ 155.000 euros Furnishing: - heavy hydraulic / link-guided guillotine shears - HACO DNC - control model SC 70 * 200 programs x 127 sets per program * Material library max. 32 materials * programmable positioning from the backgauge * automatic electro-hydraulic cutting gap adjustment * automatic electro-hydraulic cutting angle adjustment * automatic retraction from the backgauge * automatic and manual programming mode * Pivoting control panel, front left - electrical cutting length limitation - front finger protection - Ball casters in the table - 1x extra long side stop, with ball rollers - 2x extra long support arms, with ball rollers - foot switch - CE mark/Declaration of Conformity - User manual in German
            sheet width 3020 mm
            plate thickness 25,00 mm
            no. of strokes 4 - 8 Hub/min
            back stop - adjustable ca. 1250 mm
            work height max. 1040 mm
            Control SC 70
            cutting angle 0,5 - 3,0 °
            down holder 18 Stück
            engine output 56,0 kW
            weight of the machine ca. 38.000 kg
            range L-W-H 4200 x 2600 x 2650 mm
            Description :
            ** good condition - ready to use (!)
            ** New price ~ 155.000 euros

            Furnishing:
            - heavy hydraulic / link-guided guillotine shears
            - HACO DNC - control model SC 70
            * 200 programs x 127 sets per program
            * Material library max. 32 materials
            * programmable positioning from the backgauge
            * automatic electro-hydraulic cutting gap adjustment
            * automatic electro-hydraulic cutting angle adjustment
            * automatic retraction from the backgauge
            * automatic and manual programming mode
            * Pivoting control panel, front left
            - electrical cutting length limitation
            - front finger protection
            - Ball casters in the table
            - 1x extra long side stop, with ball rollers
            - 2x extra long support arms, with ball rollers
            - foot switch
            - CE mark/Declaration of Conformity
            - User manual in German


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic MVD HGM 3010


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94153 · Plate Shear - Hydraulic

          MVD - HGM 3010 - - 2006 -

          Technical details
          sheet width 3000 mm︱plate thickness 10,00 mm︱distance between columns mm︱total power requirement 22 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. m︱
          - controlled back gauge 1000 mm - central cutting gap adjustment - pneumatic sheet holding device - Rear area protection using a light barrier - Angle stop - Support arms - Hold-down device resealed
            sheet width 3000 mm
            plate thickness 10,00 mm
            total power requirement 22 kW
            weight of the machine ca. 10 t
            Description :
            - controlled back gauge 1000 mm
            - central cutting gap adjustment
            - pneumatic sheet holding device
            - Rear area protection using a light barrier
            - Angle stop
            - Support arms
            - Hold-down device resealed


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3006


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325325 · Plate Shear - Hydraulic

          BAYKAL - HGL 3006 - - 2005 - DAC 310

          Technical details
          sheet width 3060 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control DAC 310 ︱total power requirement 11.0 kW︱weight 5450 kg︱range L-W-H 3800 x 1940 x 1560 mm︱
          Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model “DAC 310” * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Speed 100 mm/sec - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - electro-motoric cutting gap adjustment Machinelink: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325325
            sheet width 3060 mm
            plate thickness 6.0 mm
            thickness at "Niro-steel" 4.0 mm
            distance between columns 3100 mm
            down holder 16 Stück
            no. of strokes 20 Hub/min
            oil volume 160 ltr.
            cutting angle 1.6 °
            Control DAC 310
            total power requirement 11.0 kW
            weight 5450 kg
            range L-W-H 3800 x 1940 x 1560 mm
            Description :
            Furnishing:
            - electro-hydraulic swing cutting shears including sheet metal holding device
            - DELEM CNC control unit, model “DAC 310”
            * Travel distance back gauge X = 750 mm
            * Backlash-free ball screw for back gauge
            * Speed 100 mm/sec
            - electrical cutting length limitation
            * Cutting length limitation to increase the number of strokes/min.
            - electro-motoric cutting gap adjustment
            - Tip operation with push buttons on the control panel on the left
            - front support plates with ball rollers
            - front finger/intervention protection
            - 1x side stop with T-slot & millimeter scale
            - 3x front support arms
            - original operating instructions including CE declaration

            ** Special accessories included:
            - pneumatic sheet metal holding device for thin sheet metal cuts
            - electro-motoric cutting gap adjustment

            Machinelink:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325325


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3006


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94160 · Plate Shear - Hydraulic

          BAYKAL - HGL 3006 - - 2005 - DAC 310

          Technical details
          sheet width 3060 mm︱plate thickness 6,00 mm︱thickness at "Niro-steel" 4,00 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control DAC 310 ︱total power requirement 11.0 kW︱weight 5450 kg︱range L-W-H 3800 x 1940 x 1560 mm︱
          Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model “DAC 310” * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Speed 100 mm/sec - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - electro-motoric cutting gap adjustment
            sheet width 3060 mm
            plate thickness 6,00 mm
            thickness at "Niro-steel" 4,00 mm
            distance between columns 3100 mm
            down holder 16 Stück
            no. of strokes 20 Hub/min
            oil volume 160 ltr.
            cutting angle 1.6 °
            Control DAC 310
            total power requirement 11.0 kW
            weight 5450 kg
            range L-W-H 3800 x 1940 x 1560 mm
            Description :
            Furnishing:
            - electro-hydraulic swing cutting shears including sheet metal holding device
            - DELEM CNC control unit, model “DAC 310”
            * Travel distance back gauge X = 750 mm
            * Backlash-free ball screw for back gauge
            * Speed 100 mm/sec
            - electrical cutting length limitation
            * Cutting length limitation to increase the number of strokes/min.
            - electro-motoric cutting gap adjustment
            - Tip operation with push buttons on the control panel on the left
            - front support plates with ball rollers
            - front finger/intervention protection
            - 1x side stop with T-slot & millimeter scale
            - 3x front support arms
            - original operating instructions including CE declaration

            ** Special accessories included:
            - pneumatic sheet metal holding device for thin sheet metal cuts
            - electro-motoric cutting gap adjustment




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FISCHER DHS 12/3100


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19671 · Plate Shear - Hydraulic

          FISCHER - DHS 12/3100 - - 2005 -

          Technical details
          sheet width 3100 mm︱plate thickness 12 mm︱distance between columns 3260 mm︱back stop - adjustable 3 - 1250 mm︱power capacity 37 kW︱voltage 400 V︱weight of the machine ca. ca. 14 t︱dimensions of the machine ca. 4,00 x 4,00 x 2,20 m︱
          CNC-controlled plate shear www.kefischer.de
            sheet width 3100 mm
            plate thickness 12 mm
            distance between columns 3260 mm
            back stop - adjustable 3 - 1250 mm
            power capacity 37 kW
            voltage 400 V
            weight of the machine ca. ca. 14 t
            dimensions of the machine ca. 4,00 x 4,00 x 2,20 m
            Description :
            CNC-controlled plate shear
            www.kefischer.de


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic KNUTH KHT 3206 C


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94165 · Plate Shear - Hydraulic

          KNUTH - KHT 3206 C - - 2004 - "EASY-VIEW"

          Technical details
          sheet width 3200 mm︱plate thickness 6,00 mm︱cutting angle 1° 30 °︱no. of strokes 14 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 13 Stück︱work height max. 800 mm︱Control "EASY-VIEW" ︱oil volume 270 l︱voltage 400 V︱engine output 7.5 kW︱weight 6100 kg︱range L-W-H 4010 x 1610 x 1620 mm︱
          ** from a maintenance workshop - good condition (!!) ** was only used sporadically according to the previous seller ** New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH "EASY-VIEW" touch CNC positioning control * Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle * for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of the cutting length for short strokes - Machine side stand with projection - 1x long side stop, including tilting cam and mm scale - 3x front support arms - Support table including ball rollers - rear protective device (safety doors) - front finger/encroachment protection - 1x freely movable foot switch including emergency stop button - "CE" marking - User manual (PDF)
            sheet width 3200 mm
            plate thickness 6,00 mm
            cutting angle 1° 30 °
            no. of strokes 14 Hub/min
            back stop - adjustable max. 1000 mm
            down holder 13 Stück
            work height max. 800 mm
            Control "EASY-VIEW"
            oil volume 270 l
            voltage 400 V
            engine output 7.5 kW
            weight 6100 kg
            range L-W-H 4010 x 1610 x 1620 mm
            Description :
            ** from a maintenance workshop - good condition (!!)
            ** was only used sporadically according to the previous seller
            ** New price ~ 35.000 euros

            Furnishing:
            - electro-hydraulic swing cutting shears
            - KNUTH "EASY-VIEW" touch CNC positioning control
            * Robust back gauge with high-quality ball screws
            - Machine frame & knife bar made of sturdy welded construction
            - The proven swing-cut design allows for a small knife angle
            * for optimal cutting quality and minimal distortion on the workpiece
            - hydraulically acting hold-down devices
            - electro-motoric cutting gap adjustment
            - continuous adjustment of the cutting length for short strokes
            - Machine side stand with projection
            - 1x long side stop, including tilting cam and mm scale
            - 3x front support arms
            - Support table including ball rollers
            - rear protective device (safety doors)
            - front finger/encroachment protection
            - 1x freely movable foot switch including emergency stop button
            - "CE" marking
            - User manual (PDF)




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic KNUTH KHT 3206 C


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325321 · Plate Shear - Hydraulic

          KNUTH - KHT 3206 C - - 2004 - "EASY-VIEW"

          Technical details
          sheet width 3200 mm︱plate thickness 0.5 - 6.0 mm︱cutting angle 1° 30 °︱no. of strokes 14 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 13 Stück︱work height max. 800 mm︱Control "EASY-VIEW" ︱oil volume 270 l︱voltage 400 V︱engine output 7.5 kW︱weight 6100 kg︱range L-W-H 4010 x 1610 x 1620 mm︱
          ** from a maintenance workshop - good condition (!!) ** was only used sporadically according to the previous seller ** New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH "EASY-VIEW" touch CNC positioning control * Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle * for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of the cutting length for short strokes - Machine side stand with projection - 1x long side stop, including tilting cam and mm scale - 3x front support arms - Support table including ball rollers - rear protective device (safety doors) - front finger/encroachment protection - 1x freely movable foot switch including emergency stop button - "CE" marking - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325321
            sheet width 3200 mm
            plate thickness 0.5 - 6.0 mm
            cutting angle 1° 30 °
            no. of strokes 14 Hub/min
            back stop - adjustable max. 1000 mm
            down holder 13 Stück
            work height max. 800 mm
            Control "EASY-VIEW"
            oil volume 270 l
            voltage 400 V
            engine output 7.5 kW
            weight 6100 kg
            range L-W-H 4010 x 1610 x 1620 mm
            Description :
            ** from a maintenance workshop - good condition (!!)
            ** was only used sporadically according to the previous seller
            ** New price ~ 35.000 euros

            Furnishing:
            - electro-hydraulic swing cutting shears
            - KNUTH "EASY-VIEW" touch CNC positioning control
            * Robust back gauge with high-quality ball screws
            - Machine frame & knife bar made of sturdy welded construction
            - The proven swing-cut design allows for a small knife angle
            * for optimal cutting quality and minimal distortion on the workpiece
            - hydraulically acting hold-down devices
            - electro-motoric cutting gap adjustment
            - continuous adjustment of the cutting length for short strokes
            - Machine side stand with projection
            - 1x long side stop, including tilting cam and mm scale
            - 3x front support arms
            - Support table including ball rollers
            - rear protective device (safety doors)
            - front finger/encroachment protection
            - 1x freely movable foot switch including emergency stop button
            - "CE" marking
            - User manual (PDF)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325321


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT MULTICUT 10-30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94137 · Plate Shear - Hydraulic

          EHT - MULTICUT 10-30 - - 2003 -

          Technical details
          sheet width 3050 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱cutting angle adjustment 0,5 - 2,5 °︱cutting gap adjustment 0,05 - 1,0 mm︱back stop - adjustable 10 - 1000 mm︱adjustment speed 180 mm/s︱down holder 14 Stück︱strokes per minute 12 - 25 ︱oil volume 300 Liter︱0 max. 300 bar︱voltage 400 V︱main drive 18,5 kW︱weight of the machine ca. 10.000 kg.︱dimensions of the machine ca. 4080 x 2350 x 2060 mm︱
          ** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale
            sheet width 3050 mm
            plate thickness 10,00 mm
            thickness at "Niro-steel" 6,00 mm
            cutting angle adjustment 0,5 - 2,5 °
            cutting gap adjustment 0,05 - 1,0 mm
            back stop - adjustable 10 - 1000 mm
            adjustment speed 180 mm/s
            down holder 14 Stück
            strokes per minute 12 - 25
            oil volume 300 Liter
            0 max. 300 bar
            voltage 400 V
            main drive 18,5 kW
            weight of the machine ca. 10.000 kg.
            dimensions of the machine ca. 4080 x 2350 x 2060 mm
            Description :
            ** maintained condition (!!)
            ** was serviced annually by the manufacturer TRUMPF / EHT

            Furnishing:
            - Baffle-guided metal sheet shears with automatic cutting angle adjustment
            - Machine frame is an all-steel welded construction
            * Side stands are connected to the machine table
            - EHT / ELGO CNC control model P-9724, front left control panel
            * for backgauge adjustment and program selection (4 axes)
            - Automatic cutting angle adjustment
            - Automatic cutting gap adjustment
            - Automatic cutting gap compensation
            - Support table with ball rollers
            * There are recessed grips between the table sheets
            - front, hinged finger protection
            - hydraulically acting sheet metal hold-down devices
            - rear protective device (protective grille + light barriers)
            - 1x freely movable foot switch
            - original operating instructions

            **Special accessories included:
            - 1x EHT extra long side stop with mm scale & feet
            - 1x EHT extra long support arm with mm scale & feet
            - 2x EHT additional support arms with mm scale




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT MULTICUT 10-30


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325292 · Plate Shear - Hydraulic

          EHT - MULTICUT 10-30 - - 2003 -

          Technical details
          sheet width 3050 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱cutting angle adjustment 0,5 - 2,5 °︱cutting gap adjustment 0,05 - 1,0 mm︱back stop - adjustable 10 - 1000 mm︱adjustment speed 180 mm/s︱down holder 14 Stück︱strokes per minute 12 - 25 ︱oil volume 300 Liter︱0 max. 300 bar︱voltage 400 V︱main drive 18,5 kW︱weight of the machine ca. 10.000 kg.︱dimensions of the machine ca. 4080 x 2350 x 2060 mm︱
          ** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325292
            sheet width 3050 mm
            plate thickness 10,0 mm
            thickness at "Niro-steel" 6,0 mm
            cutting angle adjustment 0,5 - 2,5 °
            cutting gap adjustment 0,05 - 1,0 mm
            back stop - adjustable 10 - 1000 mm
            adjustment speed 180 mm/s
            down holder 14 Stück
            strokes per minute 12 - 25
            oil volume 300 Liter
            0 max. 300 bar
            voltage 400 V
            main drive 18,5 kW
            weight of the machine ca. 10.000 kg.
            dimensions of the machine ca. 4080 x 2350 x 2060 mm
            Description :
            ** maintained condition (!!)
            ** was serviced annually by the manufacturer TRUMPF / EHT

            Furnishing:
            - Baffle-guided metal sheet shears with automatic cutting angle adjustment
            - Machine frame is an all-steel welded construction
            * Side stands are connected to the machine table
            - EHT / ELGO CNC control model P-9724, front left control panel
            * for backgauge adjustment and program selection (4 axes)
            - Automatic cutting angle adjustment
            - Automatic cutting gap adjustment
            - Automatic cutting gap compensation
            - Support table with ball rollers
            * There are recessed grips between the table sheets
            - front, hinged finger protection
            - hydraulically acting sheet metal hold-down devices
            - rear protective device (protective grille + light barriers)
            - 1x freely movable foot switch
            - original operating instructions

            **Special accessories included:
            - 1x EHT extra long side stop with mm scale & feet
            - 1x EHT extra long support arm with mm scale & feet
            - 2x EHT additional support arms with mm scale

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325292


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3100 x 8


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325329 · Plate Shear - Hydraulic

          BAYKAL - HGL 3100 x 8 - - 2002 -

          Technical details
          sheet width 3060 mm︱plate thickness 8.0 mm︱thickness at "Niro-steel" 6.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 10 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Number of working hours ca. 2.100 h︱back stop - adjustable 6.0 - 750 mm︱Control ︱total power requirement 18.5 kW︱weight 6300 kg︱range L-W-H 3900 x 2300 x 1630 mm︱
          ** from a maintenance workshop ** hardly used - only approx. 2.100 operating hours (!!) ** New price approx. 40.000 euros ** Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Back gauge beam can be automatically tilted up to maximum position * for pushing extra long sheets through * Travel speed 100 mm/sec - 1x stable side stop * with T-slot, flip stop and millimeter scale - 2x front, stable support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * Can be operated centrally on the right side stand - front support plates with ball rollers - front finger/intervention protection - Tip operation with push buttons on the control panel on the left - Protective grille = safety device behind the machine - original operating instructions including CE declaration * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325329
            sheet width 3060 mm
            plate thickness 8.0 mm
            thickness at "Niro-steel" 6.0 mm
            distance between columns 3100 mm
            down holder 16 Stück
            no. of strokes 10 Hub/min
            oil volume 160 ltr.
            cutting angle 1.6 °
            Number of working hours ca. 2.100 h
            back stop - adjustable 6.0 - 750 mm
            total power requirement 18.5 kW
            weight 6300 kg
            range L-W-H 3900 x 2300 x 1630 mm
            Description :
            ** from a maintenance workshop
            ** hardly used - only approx. 2.100 operating hours (!!)
            ** New price approx. 40.000 euros
            ** Special price on request

            Furnishing:
            - electro-hydraulic swing cutting shears
            - ELGO digital display model P9521, for electric back gauge
            * Travel distance back gauge X = 750 mm
            * Backlash-free ball screw for back gauge
            * Back gauge beam can be automatically tilted up to maximum position
            * for pushing extra long sheets through
            * Travel speed 100 mm/sec
            - 1x stable side stop
            * with T-slot, flip stop and millimeter scale
            - 2x front, stable support arms
            - electrical cutting length limitation
            * Cutting length limitation to increase the number of strokes/min.
            - manual cutting gap adjustment
            * Can be operated centrally on the right side stand
            - front support plates with ball rollers
            - front finger/intervention protection
            - Tip operation with push buttons on the control panel on the left
            - Protective grille = safety device behind the machine
            - original operating instructions including CE declaration

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325329


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA DHGM 3010


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-s345 · Plate Shear - Hydraulic

          DURMA - DHGM 3010 - - 2002 -

          Technical details
          sheet width 3000 mm︱plate thickness 10 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 9,8 t︱dimensions of the machine ca. 4,15 x 3,55 x 2 m︱
          Brand: Durma Type: DHGM 3010 Year of make: 2002 Knife length: 3.000 mm Plate thickness: 10 mm Electric backstop Machine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mm Machine weight: 9.800 kg
            sheet width 3000 mm
            plate thickness 10 mm
            weight of the machine ca. 9,8 t
            dimensions of the machine ca. 4,15 x 3,55 x 2 m
            Description :
            Brand: Durma
            Type: DHGM 3010
            Year of make: 2002
            Knife length: 3.000 mm
            Plate thickness: 10 mm
            Electric backstop
            Machine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mm
            Machine weight: 9.800 kg



        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic Durma DHGM 3010


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S345 · Plate Shear - Hydraulic

          Durma - DHGM 3010 - - 2002 -

          Technical details
          Knife length 3000 mm︱Plate thickness 10 mm︱Machine dimensions (lxwxh) 4.150 x 3.550 x 2.000 mm︱Machine weight 9.800 kg︱
            Knife length 3000 mm
            Plate thickness 10 mm
            Machine dimensions (lxwxh) 4.150 x 3.550 x 2.000 mm
            Machine weight 9.800 kg
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          •   
          •