,
Европейская сеть дилеров складской техники
+49 (0) 2389 5299080
Служба поиска Продам подержанные машины

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:
             Посмотреть: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          1. machine-categorie:
          2. Metal Processing
          3. Sheet metal working - shaeres - bending
          4. Plate Shear - Hydraulic

          Plate Shear - Hydraulic

          Machinelist: Plate Shear - Hydraulic

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAFAN VS310-6

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92269 · Plate Shear - Hydraulic

          SAFAN - VS310-6 - - 1980 -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱cutting angle 0,5-2 °︱quantity of oil 150 l︱distance between columns mm︱Control ︱total power requirement 15 kW︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. 3,9x2,2x1,7 m︱
          Front stop on the left, 2 support arms, motorized rear stop, manual adjustment of the cutting gap, 1 set of spare knives
            sheet width 3000 mm
            plate thickness 6 mm
            cutting angle 0,5-2 °
            quantity of oil 150 l
            total power requirement 15 kW
            weight of the machine ca. 6,2 t
            dimensions of the machine ca. 3,9x2,2x1,7 m
            Description :
            Front stop on the left,
            2 support arms,
            motorized rear stop,
            manual adjustment of the cutting gap,
            1 set of spare knives


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic WIEGER DELTA 6/25

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94157 · Plate Shear - Hydraulic

          WIEGER - DELTA 6/25 - - 1980 -

          Technical details
          sheet width 2550 mm︱plate thickness 6,00 mm︱distance between columns mm︱down holder 14 ︱total power requirement 15 kW︱weight of the machine ca. ca. 5-6 t︱dimensions of the machine ca. 2,80 x 2,20 x 1,85 m︱
          • Motorized adjustable back gauge with display up to 700 mm • Angle stop • 2 support arms • Cutting length limitation • Stroke counter • Cutting gap adjustment • Control cabinet renewed in 2021 • Second set of knives
            sheet width 2550 mm
            plate thickness 6,00 mm
            down holder 14
            total power requirement 15 kW
            weight of the machine ca. ca. 5-6 t
            dimensions of the machine ca. 2,80 x 2,20 x 1,85 m
            Description :
            • Motorized adjustable back gauge with display up to 700 mm
            • Angle stop
            • 2 support arms
            • Cutting length limitation
            • Stroke counter
            • Cutting gap adjustment
            • Control cabinet renewed in 2021
            • Second set of knives


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic MENGELE S6-2000

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92306 · Plate Shear - Hydraulic

          MENGELE - S6-2000 - - 1980 - Elgo Typ 85

          Technical details
          sheet width 2050 mm︱plate thickness 6 mm︱Control Elgo Typ 85 ︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 2,3x2,8x2 m︱
          sheet support system
            sheet width 2050 mm
            plate thickness 6 mm
            Control Elgo Typ 85
            weight of the machine ca. 6 t
            dimensions of the machine ca. 2,3x2,8x2 m
            Description :
            sheet support system


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STROJAREN PIESOK NTE 3150/6,3

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94174 · Plate Shear - Hydraulic

          STROJAREN PIESOK - NTE 3150/6,3 - - 1980 -

          Technical details
          sheet width 3150 mm︱plate thickness 6,30 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 8,90 t︱dimensions of the machine ca. m︱
          Dimensions: approx. L 4.00 x W 1.65 (plus support arms) x H 1.75 m • Motorized back gauge 15 – 600 mm • Angle stop • Support arms
            sheet width 3150 mm
            plate thickness 6,30 mm
            weight of the machine ca. 8,90 t
            Description :
            Dimensions: approx. L 4.00 x W 1.65 (plus support arms) x H 1.75 m

            • Motorized back gauge 15 – 600 mm
            • Angle stop
            • Support arms


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic MENGELE S25-3000

          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland
          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10092 · Plate Shear - Hydraulic

          MENGELE - S25-3000 - - 1980 -

          Technical details
          sheet width 3050 mm︱plate thickness 25 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            sheet width 3050 mm
            plate thickness 25 mm


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic Schroeder 2540 x 4

          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland
          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3244 · Plate Shear - Hydraulic

          Schroeder - 2540 x 4 - - 1980 -

          Technical details
          sheet width 2500 mm︱plate thickness 4 mm︱distance between columns 2550 mm︱cutting angle 1,5 °︱oil volume 120 l︱machine weight ab. 4300 kg︱dimensions 3400x2100x1500 mm︱
            sheet width 2500 mm
            plate thickness 4 mm
            distance between columns 2550 mm
            cutting angle 1,5 °
            oil volume 120 l
            machine weight ab. 4300 kg
            dimensions 3400x2100x1500 mm


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic MENGELE Hydrl. Tafelschere

          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland
          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1017 · Plate Shear - Hydraulic

          MENGELE - Hydrl. Tafelschere - - 1980 -

          Technical details
          sheet width / mm︱plate thickness / mm︱distance between columns / mm︱
          Hydraulic guillotine shears Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons
            sheet width / mm
            plate thickness / mm
            distance between columns / mm
            Description :
            Hydraulic guillotine shears

            Year of construction: 1980
            Brand: Mengele
            Width up to: 3000mm
            Sheet thickness CS: 24mm
            Sheet thickness SS: 13mm
            Stop max.: 1m
            Weight: 34 tons


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FISCHER K 3/3000

          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich
          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-70003 · Plate Shear - Hydraulic

          FISCHER - K 3/3000 - - 1979 -

          Technical details
          sheet width 3000 mm︱plate thickness 3 mm︱distance between columns / mm︱blade length 3160 mm︱no. of strokes 70 Hub/min︱front stop - adjustable 80 - 1200 mm︱back stop - adjustable 3 - 1250 mm︱cutting angle 1° 15' ︱total power requirement kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3,5 x 2,3 x 1,5 m︱
            sheet width 3000 mm
            plate thickness 3 mm
            distance between columns / mm
            blade length 3160 mm
            no. of strokes 70 Hub/min
            front stop - adjustable 80 - 1200 mm
            back stop - adjustable 3 - 1250 mm
            cutting angle 1° 15'
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3,5 x 2,3 x 1,5 m


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAFAN ES-310-3

          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland
          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S375 · Plate Shear - Hydraulic

          SAFAN - ES-310-3 - - 1978 -

          Technical details
          Knife length 3.100 mm︱Plate thickness 3.0 mm︱CNC brand - ︱
          Brand Safan Type ES-310-3 Blade length 3.100 mm Plate thickness 3.0 mm With bearings Electric back gauge: Defect
            Knife length 3.100 mm
            Plate thickness 3.0 mm
            CNC brand -
            Description :
            Brand Safan
            Type ES-310-3
            Blade length 3.100 mm
            Plate thickness 3.0 mm
            With bearings

            Electric back gauge: Defect


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 6-31

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011147 · Plate Shear - Hydraulic

          EHT - TSS 6-31 - - 1977 -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱weight 7000 kg︱
          Equipment/accessories: - adjustable support table - Sheet support - angle stop - Sheet support arms - foot switch
            sheet width 3050 mm
            plate thickness 6 mm
            weight 7000 kg
            Description :
            Equipment/accessories:
            - adjustable support table
            - Sheet support
            - angle stop
            - Sheet support arms
            - foot switch


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ECLAIR / PASKOWSKY-Schweiz ASS. 5 mm

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12315 · Plate Shear - Hydraulic

          ECLAIR / PASKOWSKY-Schweiz - ASS. 5 mm - - 1976 -

          Technical details
          sheet width 3050 mm︱plate thickness 5 mm︱distance between columns - mm︱table height 750 mm︱strokes per minute until 25 - 80 ︱cutting angle 1° 10´ ︱Number of downholders 16 ︱total power requirement 11 kW︱weight of the machine ca. 4,9 t︱dimensions of the machine ca. 3,4 x 2,6 x 1,4 m︱Electric 380 Volt ︱Back gauge motorized 750 mm︱Squaring arm withh mm-scale 1200 mm︱Support arms 2 x / 1200 mm︱Shadow line lighting ︱Cutting lenght bound ︱Foot switch ︱Condition: ready for operation ︱Video(s) available on our website. ︱
          Hydraulic guillotine shear in a solid all-welded construction with cutting output of 3050 x 5 mm and motorized backgauge adjustable from the front and readable via counter. The cutting performance refers to sheets with a strength of max. 45 kg/mm². Machine dealer with own stock of 1600 m².
            sheet width 3050 mm
            plate thickness 5 mm
            distance between columns - mm
            table height 750 mm
            strokes per minute until 25 - 80
            cutting angle 1° 10´
            Number of downholders 16
            total power requirement 11 kW
            weight of the machine ca. 4,9 t
            dimensions of the machine ca. 3,4 x 2,6 x 1,4 m
            Back gauge motorized 750 mm
            Squaring arm withh mm-scale 1200 mm
            Support arms 2 x / 1200 mm
            Description :
            Hydraulic guillotine shear in a solid all-welded construction with cutting
            output of 3050 x 5 mm and motorized backgauge adjustable from the front and
            readable via counter. The cutting performance refers to sheets with a strength
            of max. 45 kg/mm².
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA ADIRA GHV0835

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1481 · Plate Shear - Hydraulic

          ADIRA - ADIRA GHV0835 - - 1975 -

          Technical details
          gebraucht ︱ 1975 ︱ 9430 ︱ prompt, Zwischenverkauf v ︱ Portugal ︱ 12400 €︱ 10200 €︱ 1 ︱ 3500 mm︱ 8 mm︱ 450 mm︱ 40 1/min︱ 0,5°/1°/1,7° °︱ 1000 mm︱ 14.7 kW︱ 4300 mm︱ 2100 mm︱ 1650 mm︱ 10500 kg︱
          link-guided machine with cutting angle adjustment cutting length limitation trapezoidal spindle for backgauge 1x side stop 2x table support arms balls in the table 18x hold-down devices operating instructions in GERMAN does not complie with the German UVV & Austrian AMVO
            gebraucht
            1975
            9430
            prompt, Zwischenverkauf v
            Portugal
            12400 €
            10200 €
            1
            3500 mm
            8 mm
            450 mm
            40 1/min
            0,5°/1°/1,7° °
            1000 mm
            14.7 kW
            4300 mm
            2100 mm
            1650 mm
            10500 kg
            Description :
            link-guided machine with cutting angle adjustment
            cutting length limitation
            trapezoidal spindle for backgauge
            1x side stop
            2x table support arms
            balls in the table
            18x hold-down devices
            operating instructions in GERMAN
            does not complie with the German UVV & Austrian AMVO


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • 10.200 €
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DARLEY GS 3660 x 16

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6432 · Plate Shear - Hydraulic

          DARLEY - GS 3660 x 16 - - 1975 -

          Technical details
          sheet width 3700 mm︱plate thickness 16 mm︱distance between columns 3860 mm︱cutting angle 2 °︱back stop - adjustable 1000 mm︱down holder 18 Stk.︱oil volume ca. 500 l︱total power requirement 22 kW︱weight of the machine ca. 10500 kg︱dimensions of the machine ca. 4500 x 2500 x 2500 mm︱
          Max. Sheet thickness stainless steel: 12mm Cut gap adjustment: 0-16 mm - Machine has a back gauge adjustable from the front. - cut line lighting
            sheet width 3700 mm
            plate thickness 16 mm
            distance between columns 3860 mm
            cutting angle 2 °
            back stop - adjustable 1000 mm
            down holder 18 Stk.
            oil volume ca. 500 l
            total power requirement 22 kW
            weight of the machine ca. 10500 kg
            dimensions of the machine ca. 4500 x 2500 x 2500 mm
            Description :
            Max. Sheet thickness stainless steel: 12mm
            Cut gap adjustment: 0-16 mm

            - Machine has a back gauge adjustable from the front.
            - cut line lighting


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAGITA-BEYELER 3100 x 4

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01240 · Plate Shear - Hydraulic

          SAGITA-BEYELER - 3100 x 4 - - 1973 -

          Technical details
          sheet width 3100 mm︱plate thickness 4 mm︱distance between columns 3170 mm︱back stop - adjustable 650 mm︱down holder 11 Stück︱cutting angle 1,5 °︱no. of strokes 30 Hub/min︱table height 750 mm︱total power requirement 12 kW︱weight of the machine ca. 4 t︱dimensions of machine L x W x H 3,60 x 1,50 x 1,40 m︱
          Accessories: electr. back stop, angle front stop, table extensions
            sheet width 3100 mm
            plate thickness 4 mm
            distance between columns 3170 mm
            back stop - adjustable 650 mm
            down holder 11 Stück
            cutting angle 1,5 °
            no. of strokes 30 Hub/min
            table height 750 mm
            total power requirement 12 kW
            weight of the machine ca. 4 t
            dimensions of machine L x W x H 3,60 x 1,50 x 1,40 m
            Description :
            Accessories: electr. back stop, angle front stop, table extensions


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 16 - 20

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18188 · Plate Shear - Hydraulic

          EHT - TSS 16 - 20 - - 1971 -

          Technical details
          sheet width 2000 mm︱plate thickness 16 bei St 42 mm︱passage width 2250 mm︱impact length 1000 mm︱blade length 2005 mm︱throat 600 mm︱cutting gap adjustment 0,05 - 0,95 mm︱cutting angle 1° 40' °︱down holder 10 Stück︱back stop - adjustable 10 - 1000 mm︱table: 2500 x 700 ︱table height over floor 800 mm︱quantity of oil 900 l︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3 x 2,3 x 2,3 m︱voltage 380 V︱
          Food switch, material support beams, spare knifes.
            sheet width 2000 mm
            plate thickness 16 bei St 42 mm
            passage width 2250 mm
            impact length 1000 mm
            blade length 2005 mm
            throat 600 mm
            cutting gap adjustment 0,05 - 0,95 mm
            cutting angle 1° 40' °
            down holder 10 Stück
            back stop - adjustable 10 - 1000 mm
            table: 2500 x 700
            table height over floor 800 mm
            quantity of oil 900 l
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3 x 2,3 x 2,3 m
            voltage 380 V
            Description :
            Food switch, material support beams, spare knifes.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 6-50

          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland
          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3474 · Plate Shear - Hydraulic

          EHT - TSS 6-50 - - 1970 -

          Technical details
          sheet width 5000 mm︱plate thickness 6 mm︱distance between columns 5030 mm︱throat 340 mm︱weight of the machine ca. 14 t︱dimensions of the machine ca. 5500 x 2250 x 2200 mm︱
            sheet width 5000 mm
            plate thickness 6 mm
            distance between columns 5030 mm
            throat 340 mm
            weight of the machine ca. 14 t
            dimensions of the machine ca. 5500 x 2250 x 2200 mm


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic LOTZE KSSHY-25/8

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011169 · Plate Shear - Hydraulic

          LOTZE - KSSHY-25/8 - - 1966 -

          Technical details
          sheet width 2540 mm︱plate thickness 8 mm︱work height max. 850 mm︱machine weight ab. 6.800 kg︱dimensions 3200 x 2300 x 1600 mm︱
            sheet width 2540 mm
            plate thickness 8 mm
            work height max. 850 mm
            machine weight ab. 6.800 kg
            dimensions 3200 x 2300 x 1600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SCHARRINGHAUSEN MTU / 4 / 2600

          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland
          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3775 · Plate Shear - Hydraulic

          SCHARRINGHAUSEN - MTU / 4 / 2600 - - 1964 -

          Technical details
          sheet width 2600 mm︱plate thickness 4 mm︱weight of the machine ca. 3 t︱
            sheet width 2600 mm
            plate thickness 4 mm
            weight of the machine ca. 3 t


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HVR 4100-10 HH MONO

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8328130 · Plate Shear - Hydraulic

          ERMAK - CNC HVR 4100-10 HH MONO - - - CYBELEC Cybtouch

          Technical details
          sheet width 4100 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱down holder 28 Stück︱no. of strokes 18 Hub/min︱oil volume 260 ltr.︱cutting angle 0,5 - 2 °︱control CYBELEC Cybtouch︱engine output 22,0 kW︱back stop - adjustable 1000 mm︱range L-W-H 6100 x 2580 x 2460 mm︱weight 15.100 kg.︱
          -------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device * Monoblock design
            sheet width 4100 mm
            plate thickness 10,0 mm
            thickness at "Niro-steel" 6,0 mm
            down holder 28 Stück
            no. of strokes 18 Hub/min
            oil volume 260 ltr.
            cutting angle 0,5 - 2 °
            control CYBELEC Cybtouch
            engine output 22,0 kW
            back stop - adjustable 1000 mm
            range L-W-H 6100 x 2580 x 2460 mm
            weight 15.100 kg.
            Description :

            --------------------------------------------------
            electr. / hydraulic CNC guillotine shears - guided by a backdrop
            * with CYBELEC CNC touch screen control
            * with electr. / hydr. Cutting gap and cutting angle adjustment
            --------------------------------------------------

            Furnishing:
            - CNC guillotine guillotine shears
            - with electr. / hydr. Cutting gap and cutting angle adjustment
            - CYBELEC CNC touch screen controller, model CybTouch 8
            * Backgauge preselection - X axis
            * Cutting gap adjustment
            * Number of pieces
            * Cutting length limitation
            * Material preselection, including sheet thickness
            * Cutting line lighting
            - motorized backgauge, travel = 1,000 mm (X axis)
            * on ball screws
            * autom. Can be folded up at max.travel, for longer cuts
            - 1x side stop
            - 2x front support arms
            - Ball rollers in the front support table
            - hinged finger protection, with safety switch
            - BOSCH / HOERBIGER hydraulic system
            - SIEMENS electrical system
            - light barrier behind the machine (safety device)
            - foot switch
            - CE mark / declaration of conformity
            - User manual: machine and control in German

            ** including special equipment:
            - pneumatic sheet metal holding device
            * Monoblock design


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ECLAIR TSH 3-1000

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94144 · Plate Shear - Hydraulic

          ECLAIR - TSH 3-1000 - - -

          Technical details
          sheet width 1050 mm︱plate thickness 3,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 1,40 t︱dimensions of the machine ca. m︱
          Motorized back gauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened operation manual
            sheet width 1050 mm
            plate thickness 3,00 mm
            weight of the machine ca. 1,40 t
            Description :
            Motorized back gauge up to 1000 mm with fine adjustment via handwheel
            Shear angle adjustment
            Knife sharpened
            operation manual


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HVR 3100-13

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8323029 · Plate Shear - Hydraulic

          ERMAK - CNC HVR 3100-13 - - -

          Technical details
          sheet width 3100 mm︱plate thickness 13,0 mm︱thickness at "Niro-steel" 8,0 mm︱down holder 14 Stück︱no. of strokes 11 - 20 Hub/min︱oil volume 310 ltr.︱cutting angle 0,05 - 2,0 °︱throat 350 mm︱table height 900 mm︱total power requirement 22,0 kW︱weight of the machine ca. 13.300 kg︱range L-W-H 5.110 x 2.570 x 2.400 mm︱
          -------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German
            sheet width 3100 mm
            plate thickness 13,0 mm
            thickness at "Niro-steel" 8,0 mm
            down holder 14 Stück
            no. of strokes 11 - 20 Hub/min
            oil volume 310 ltr.
            cutting angle 0,05 - 2,0 °
            throat 350 mm
            table height 900 mm
            total power requirement 22,0 kW
            weight of the machine ca. 13.300 kg
            range L-W-H 5.110 x 2.570 x 2.400 mm
            Description :

            --------------------------------------------------
            heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop
            * with CYBELEC CNC touch screen control
            * with electr. / hydr. Cutting gap and cutting angle adjustment
            --------------------------------------------------

            Furnishing:
            - CNC guillotine guiding shears
            - with electr. / hydr. Cutting gap and cutting angle adjustment
            - CYBELEC CNC touch screen controller, model CybTouch 8
            * Backgauge preselection - X axis
            * Cutting gap adjustment
            * Number of pieces
            * Cutting length limitation
            * Material preselection, including sheet thickness
            * Cutting line lighting
            - motorized backgauge, travel = 1,000 mm (X axis)
            * on ball screws
            * autom. Can be folded up at max.travel, for longer cuts
            - 1x side stop
            - 2x front support arms
            - Ball casters in the front support table
            - hinged finger protection, with safety switch
            - BOSCH / HOERBIGER hydraulic system
            - SIEMENS electrical system
            - light barrier behind the machine (safety device)
            - foot switch
            - CE mark / declaration of conformity
            - User manual: machine and control in German


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic JOERG 4865

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325295 · Plate Shear - Hydraulic

          JOERG - 4865 - - - DAC 150

          Technical details
          sheet width 2550 mm︱plate thickness 2,50 mm︱thickness at "Niro-steel" 1,25 mm︱cutting angle 1°30 ︱down holder 12 Stück︱no. of strokes 30 - 40 Hub/min︱back stop - adjustable ca. 950 mm︱Control DAC 150 ︱engine output 7,5 kW︱weight 2800 kg︱range L-W-H 3100 x 1900 x 1700 mm︱
          ** very well-maintained condition (!!) Furnishing: - electro-hydraulic sheet metal shears // swing cut - DELEM DAC 150 NC control * operable from the front * Entry of target / actual for electr. backgauge - NC motorized backgauge * with ball screws + guide shaft - electrical cutting length limitation - manual cutting gap adjustment - 1x side stop - 2x support arms - 1x free moving footswitch - front finger protection - EMERGENCY OFF button + main switch at the front - Instruction manual control * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325295
            sheet width 2550 mm
            plate thickness 2,50 mm
            thickness at "Niro-steel" 1,25 mm
            cutting angle 1°30
            down holder 12 Stück
            no. of strokes 30 - 40 Hub/min
            back stop - adjustable ca. 950 mm
            Control DAC 150
            engine output 7,5 kW
            weight 2800 kg
            range L-W-H 3100 x 1900 x 1700 mm
            Description :
            ** very well-maintained condition (!!)

            Furnishing:
            - electro-hydraulic sheet metal shears // swing cut
            - DELEM DAC 150 NC control
            * operable from the front
            * Entry of target / actual for electr. backgauge
            - NC motorized backgauge
            * with ball screws + guide shaft
            - electrical cutting length limitation
            - manual cutting gap adjustment
            - 1x side stop
            - 2x support arms
            - 1x free moving footswitch
            - front finger protection
            - EMERGENCY OFF button + main switch at the front
            - Instruction manual control

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325295


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic WILA VS 310-6

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94110 · Plate Shear - Hydraulic

          WILA - VS 310-6 - - -

          Technical details
          sheet width 3100 mm︱plate thickness 6,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 6,50 t︱dimensions of the machine ca. m︱
          Manueller Hinteranschlag von vorne einstellbar bis bis 1000 mm Scherwinkelverstellung Schnittlängenbegrenzung Messer geschärft
            sheet width 3100 mm
            plate thickness 6,00 mm
            weight of the machine ca. 6,50 t
            Description :
            Manueller Hinteranschlag von vorne einstellbar bis bis 1000 mm
            Scherwinkelverstellung
            Schnittlängenbegrenzung
            Messer geschärft


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100-6 HH MONO

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8321044 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100-6 HH MONO - - - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6,0 mm︱thickness at "Niro-steel" 4,0 mm︱distance between columns 3100 mm︱no. of strokes 18 Hub/min︱down holder 14 Stück︱oil volume 150 ltr.︱cutting angle 1,2 °︱control CYBELEC CybTouch︱total power requirement 11,0 kW︱weight 6300 kg︱range L-W-H 4.000 x 2.100 x 1.640 mm︱
          -------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device (monoblock)
            sheet width 3100 mm
            plate thickness 6,0 mm
            thickness at "Niro-steel" 4,0 mm
            distance between columns 3100 mm
            no. of strokes 18 Hub/min
            down holder 14 Stück
            oil volume 150 ltr.
            cutting angle 1,2 °
            control CYBELEC CybTouch
            total power requirement 11,0 kW
            weight 6300 kg
            range L-W-H 4.000 x 2.100 x 1.640 mm
            Description :

            --------------------------------------------------
            electr. / hydraulic CNC swing cut shears
            * with CYBELEC CNC touch screen control
            * with electr. / hydr. Kerf adjustment
            --------------------------------------------------

            Furnishing:
            - CNC electr. / hydraulic swing cut shears
            - CYBELEC CNC touch screen controller, model CybTouch 8
            * Backgauge preselection - X axis
            * Cutting gap adjustment
            * Number of pieces
            * Cutting length limitation
            * Material preselection, including sheet thickness
            * Cutting line lighting
            - motorized backgauge, travel = 1,000 mm (X axis)
            * on ball screws
            * autom. Can be folded up at max.travel, for longer cuts
            - 1x side stop
            - 2x front support arms
            - Ball casters in the front support table
            - hinged finger protection, with safety switch
            - BOSCH / HOERBIGER hydraulic system
            - SIEMENS electrical system
            - light barrier behind the machine (safety device)
            - foot switch
            - CE mark / declaration of conformity
            - User manual: machine and control in German

            ** including special equipment:
            - pneumatic sheet metal holding device (monoblock)


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          • 8  
          •   
          •   
            •
          TOP Manufacturer:

          ERMAK - HESSE BY DURMA - ASSISTMACH - HACO - RABBA - EHT - BAYKAL - FASTI - LVD - ATLANTIC -

          Компендиум
          Software
          Содержание подержанных машин
          Политика
          Follow us
          © 2000-2024, Logotech oHG · Программное обеспечение и Интернет-услуги - Все права защищены