,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Mandrel tube bending machine

          Machinelist: Mandrel tube bending machine


          Mandrel tube bending machine

          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Mega Bender 030 / Top 030


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6387 · Mandrel tube bending machine

          ERCOLINA - Mega Bender 030 / Top 030 - - 2014 -

          Technical details
          tube diameter 60 mm︱wall strength 3 mm︱bending radius min. 2 x Rohr-Ø ÷ R200 mm︱bending angle 0 - 180 °︱gas tube pipelines 2" (60.,3mm) mm︱speed stufenlos 0,5 - 2,0 ︱total power requirement 1,5 kW︱weight of the machine ca. 0,7 t︱
          - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle
            tube diameter 60 mm
            wall strength 3 mm
            bending radius min. 2 x Rohr-Ø ÷ R200 mm
            bending angle 0 - 180 °
            gas tube pipelines 2" (60.,3mm) mm
            speed stufenlos 0,5 - 2,0
            total power requirement 1,5 kW
            weight of the machine ca. 0,7 t
            Description :
            - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic
            design (6000 mm pipe slide length)
            - Electromechanical drive of the bending axis
            - hydraulic clamping
            - mandrel feed / extract
            - 30 programs x 9 bending angle + correction angle


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine TRANSFLUID DB 628 ST / SPS


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12117 · Mandrel tube bending machine

          TRANSFLUID - DB 628 ST / SPS - - 1996 - IPU 20

          Technical details
          tube diameter 6 - 28 mm︱wall strength 2 mm︱bending radius min. 2 x D ︱Control IPU 20 ︱bending radius max. 5,0 x D mm︱bending angle max. 190 °︱arbor length 3000 mm︱operating pressure 180 bar︱hydraulic motor 4 kW︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 3,8 x 1,1 x 1,3 m︱Electric 400 Volt ︱Bending segments 15-20-26-28 mm︱Bending mandrels 4 ︱Operation panel 0,5 x 0,6 x 1,03 m︱Double Foot pedal ︱Machine manual ︱Condition: ready for operation ︱Video available on our website.
          Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then. Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².
            tube diameter 6 - 28 mm
            wall strength 2 mm
            bending radius min. 2 x D
            Control IPU 20
            bending radius max. 5,0 x D mm
            bending angle max. 190 °
            arbor length 3000 mm
            operating pressure 180 bar
            hydraulic motor 4 kW
            weight of the machine ca. 900 kg
            dimensions of the machine ca. 3,8 x 1,1 x 1,3 m
            Bending segments 15-20-26-28 mm
            Bending mandrels 4
            Operation panel 0,5 x 0,6 x 1,03 m
            Description :
            Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for
            20 angles and display in the control panel for bending angle specification,
            angle detection and angle measurement via absolute value encoder, autom. tool
            plate reset, Turning device with digital display, hydr. quick chuck, aut.
            Mandrel lubrication, adjustable length stops.
            Operating modes: MANUAL and semi-automatic.
            Control buttons: hydraulics on / off, operating mode selection, clamp to / on,
            clamp forward / backward, mandrel forward / backward, bending forward /
            backward /, locking forward / backward, mandrel lubrication, turning device
            forward / backward, plate reset, length stop forward, emergency stop.
            The machine comes from a prototype construction and was only used a little
            until 2000. After that, the machines of this department were sold. However, the
            purchaser did not use the pipe bending machine and therefore it has only stood
            in the warehouse and has not worked since then.
            Please notice that the price of a new machine today is over € 60.000,--.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ CNC 25 MR


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02675 · Mandrel tube bending machine

          SCHWARZE-WIRTZ - CNC 25 MR - - 1994 -

          Technical details
          tube diameter 25 mm︱wall strength 2 mm︱bending radius min. 10 mm︱Control ︱bending radius max. 75 mm︱total power requirement 11 kW︱weight of the machine ca. 1,45 t︱dimensions of the machine ca. m︱
            tube diameter 25 mm
            wall strength 2 mm
            bending radius min. 10 mm
            bending radius max. 75 mm
            total power requirement 11 kW
            weight of the machine ca. 1,45 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ PERFEKT WE 40 D


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01220 · Mandrel tube bending machine

          SCHWARZE-WIRTZ - PERFEKT WE 40 D - - 1977 -

          Technical details
          tube diameter max. 38 mm︱wall strength 2 mm︱bar material dia. min. 10 mm︱bending radius min. 35 mm︱bending radius max. 150 mm︱pull up length of tube 4500 mm︱bending angle max. 180 °︱accuracy of bending angle ± 0,2 °︱total power requirement 7,5 kW︱weight of the machine ca. 1,2 t︱dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m︱
          - with 8-pos. bending angle pre-selection - crawler gear control - positioning device by hand - tube twist device Following bending tools are with the machine: - ø 10 mm, radius 27,5 mm - ø 12 mm, radius 35 mm - ø 12 mm, radius 56 mm - ø 15 mm, radius 35 mm - ø 15 mm, radius 57,5 mm - ø 18 mm, radius 35 mm - ø 18 mm, radius 59 mm
            tube diameter max. 38 mm
            wall strength 2 mm
            bar material dia. min. 10 mm
            bending radius min. 35 mm
            bending radius max. 150 mm
            pull up length of tube 4500 mm
            bending angle max. 180 °
            accuracy of bending angle ± 0,2 °
            total power requirement 7,5 kW
            weight of the machine ca. 1,2 t
            dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m
            Description :
            - with 8-pos. bending angle pre-selection
            - crawler gear control
            - positioning device by hand
            - tube twist device

            Following bending tools are with the machine:
            - ø 10 mm, radius 27,5 mm
            - ø 12 mm, radius 35 mm
            - ø 12 mm, radius 56 mm
            - ø 15 mm, radius 35 mm
            - ø 15 mm, radius 57,5 mm
            - ø 18 mm, radius 35 mm
            - ø 18 mm, radius 59 mm


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA TB80-A/P80NC-4


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2040 · Mandrel tube bending machine

          ERCOLINA - TB80-A/P80NC-4 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufItalien64000 €︱ 1286.4 €︱ 76 mm︱ 4535 mm︱ 1145 mm︱ 1400 mm︱ 1488 kg︱ 18 cm³︱ 76 x 3,6 mm︱ 76 x 2,3 mm︱ 70x70x3 mm︱ 70x50x3 mm︱ 70x50x6 mm︱ 76 mm︱ 200 mm︱ 10 mm︱ 195 °︱
          Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C) New TCPlus control • 7” colour touch screen • Icons for ease use • Automatic mode, manual mode, programming mode • Advanced OFFSET function • Easy language change • Auto-tuning of the main machine components • Programmable bending speed for each single bend of the program • Unlimited programs possibility (USB port) • Every program can contain up to 30 different bends • Available extensions of 2 meters each (optional) • Tie bar (optional - art. TB80-TI)
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            64000 €
            1286.4 €
            76 mm
            4535 mm
            1145 mm
            1400 mm
            1488 kg
            18 cm³
            76 x 3,6 mm
            76 x 2,3 mm
            70x70x3 mm
            70x50x3 mm
            70x50x6 mm
            76 mm
            200 mm
            10 mm
            195 °
            Description :
            Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C)

            New TCPlus control
            • 7” colour touch screen
            • Icons for ease use
            • Automatic mode, manual mode, programming mode
            • Advanced OFFSET function
            • Easy language change
            • Auto-tuning of the main machine components
            • Programmable bending speed for each single bend of
            the program
            • Unlimited programs possibility (USB port)
            • Every program can contain up to 30 different bends
            • Available extensions of 2 meters each (optional)
            • Tie bar (optional - art. TB80-TI)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Ercobender EB76 CNC V7S


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1081 · Mandrel tube bending machine

          ERCOLINA - Ercobender EB76 CNC V7S - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufItalien121200 €︱ 2411.88 €︱ 76 mm︱ 5700 mm︱ 1100 mm︱ 1550 mm︱ 2700 kg︱ 25 cm³︱ 76,1 x 6,8 mm︱ 2”1/2 mm︱ 76,2 x 3,8 mm︱ 63,5 x 63,5 x 5,6 mm︱ 70 x 50 x 8 mm︱ 70 x 50 x 6 mm︱ 79 mm︱ 250 mm︱ 20 mm︱
          FST clamping system (Patented) 6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis), bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis) and hydraulic mandrel movement (Y3) Touch screen control with 3D display of the tube Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment Importing files in iges and dxf format (optional) Integrated Wi-Fi FURTHER MANDREL LENGTHS ON REQUEST
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            121200 €
            2411.88 €
            76 mm
            5700 mm
            1100 mm
            1550 mm
            2700 kg
            25 cm³
            76,1 x 6,8 mm
            2”1/2 mm
            76,2 x 3,8 mm
            63,5 x 63,5 x 5,6 mm
            70 x 50 x 8 mm
            70 x 50 x 6 mm
            79 mm
            250 mm
            20 mm
            Description :
            FST clamping system (Patented)
            6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis),
            bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis)
            and hydraulic mandrel movement (Y3)
            Touch screen control with 3D display of the tube
            Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment
            Importing files in iges and dxf format (optional)
            Integrated Wi-Fi

            FURTHER MANDREL LENGTHS ON REQUEST


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Megabender MG 030 PT A3/H76


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1075 · Mandrel tube bending machine

          ERCOLINA - Megabender MG 030 PT A3/H76 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufItalien35300 €︱ 716.59 €︱ 64 mm︱ 4000 mm︱ 950 mm︱ 1250 mm︱ 850 kg︱ 10 cm³︱ 64 x 3,3 mm︱ 2" mm︱ 60,3 x 2,2 mm︱ 60 x 60 x 2 mm︱ 40 x 60 x 4 mm︱ 60 x 40 x 3 mm︱ 76 mm︱ 200 mm︱ 20 mm︱
          with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to 4 rpm (Inverter versions) Pneumatic chuck ALTERNATIVELY: model with mandrel length 1,5 / 4 / 6 mm
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            35300 €
            716.59 €
            64 mm
            4000 mm
            950 mm
            1250 mm
            850 kg
            10 cm³
            64 x 3,3 mm
            2" mm
            60,3 x 2,2 mm
            60 x 60 x 2 mm
            40 x 60 x 4 mm
            60 x 40 x 3 mm
            76 mm
            200 mm
            20 mm
            Description :
            with mandrel 3 m length
            FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide
            Programmable C-axis bending
            Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops
            Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu
            30 programs of 9 bends each can be memorized
            Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis)
            External pressure gauges for easy setting of the system and closing pressure
            Variable bending speed up to 4 rpm (Inverter versions)
            Pneumatic chuck

            ALTERNATIVELY:
            model with mandrel length 1,5 / 4 / 6 mm


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Topbender TB 050 PT A3/H48


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-969 · Mandrel tube bending machine

          ERCOLINA - Topbender TB 050 PT A3/H48 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufItalien29300 €︱ 594.79 €︱ 50 mm︱ 4000 mm︱ 950 mm︱ 1250 mm︱ 430 kg︱ 6 cm³︱ 50 x 3,31 mm︱ Ø 1”1/4 mm︱ Ø 50 x 2,5 mm︱ 40 x 40 x 4 mm︱ 25 x 50 x 6 mm︱ 50 x 25 x 2,7 mm︱ 60 mm︱ 200 mm︱ 20 mm︱
          With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            29300 €
            594.79 €
            50 mm
            4000 mm
            950 mm
            1250 mm
            430 kg
            6 cm³
            50 x 3,31 mm
            Ø 1”1/4 mm
            Ø 50 x 2,5 mm
            40 x 40 x 4 mm
            25 x 50 x 6 mm
            50 x 25 x 2,7 mm
            60 mm
            200 mm
            20 mm
            Description :
            With mandrel 3 m length
            Can be used with or withoud mandrel
            Two bending speeds
            Programmable bend sequencing and mandrel retraction
            Independent clamp and pressure die adjustment
            Micrometer wiper die adjustment
            Auxiliary system for stabilizing the hydraulic slide pressure
            Quick tool change system
            With pneumatic material clamping and DRO system for linear and rotational positioning

            ALTERNATIVELY:
            model with mandrel 6 m length price on request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact

          Notching Machine

          used Sheet metal working / shaeres / bending Notching Machine UNBEKANNT A 5


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06464 · Notching Machine

          UNBEKANNT - A 5 - - Unbekannt -

          Technical details
          plate thickness 4 mm︱ Dreieck ausklinker ︱pressure . t︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            plate thickness 4 mm
            Dreieck ausklinker
            pressure . t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine METALLKRAFT AKM 200-6 VP


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2390001 · Notching Machine

          METALLKRAFT - AKM 200-6 VP - - NEU -

          Technical details
          plate thickness 6 mm︱pressure 12 t︱cutting range Breite x Länge 200 mm︱no. of strokes 15 Hub/min︱cutting angle 30 - 140 °︱total power requirement 4 kW︱weight of the machine ca. 1,02 t︱dimensions of the machine ca. 1065 x 900 x 1210 mm︱
            plate thickness 6 mm
            pressure 12 t
            cutting range Breite x Länge 200 mm
            no. of strokes 15 Hub/min
            cutting angle 30 - 140 °
            total power requirement 4 kW
            weight of the machine ca. 1,02 t
            dimensions of the machine ca. 1065 x 900 x 1210 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine SIMASV AF 226


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-45 · Notching Machine

          SIMASV - AF 226 - - 2021 -

          Technical details
          gebraucht20219589prompt, Zwischenverkauf vItalien7200 €︱ 11220 mm︱ 6 mm︱ 4.5 mm︱ 45 1/min︱ 90 °︱ 3 kW︱ 700 mm︱ 750 mm︱ 1100 mm︱ 540 kg︱
          DEMO MACHINE hydraulic drive automatic adjustment of the blade gap 1 set of blades for mild steel 2 gauges angle adjustable protection cover, acrylic glas foot pedal waste chute load hook machine feet according to CErules
            gebraucht
            2021
            9589
            prompt, Zwischenverkauf v
            Italien
            7200 €
            1
            1
            220 mm
            6 mm
            4.5 mm
            45 1/min
            90 °
            3 kW
            700 mm
            750 mm
            1100 mm
            540 kg
            Description :
            DEMO MACHINE
            hydraulic drive
            automatic adjustment of the blade gap
            1 set of blades for mild steel
            2 gauges angle adjustable
            protection cover, acrylic glas
            foot pedal
            waste chute
            load hook
            machine feet
            according to CErules


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine BERNARDO MRA-Pro


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8390110 · Notching Machine

          BERNARDO - MRA-Pro - - 2020 -

          Technical details
          plate thickness 3,0 mm︱tube diameter 60,0 mm︱motor 230 Volt︱total power requirement 1,1 kW︱
            plate thickness 3,0 mm
            tube diameter 60,0 mm
            motor 230 Volt
            total power requirement 1,1 kW


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine HUVEMA BL-3


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S353 · Notching Machine

          HUVEMA - BL-3 - - 2020 -

          Technical details
          Knife length 125 x 125 mm︱Plate thickness 1,5 mm︱Machine weight 29 kg︱capacity in tons - max. 3 t︱
          Brand Huvema Type BL-3 Year of make 2020 Machine weight 29 kg Capacity 3 T Blade length 125 x 125 mm Plate thickness 1,5 mm
            Knife length 125 x 125 mm
            Plate thickness 1,5 mm
            Machine weight 29 kg
            capacity in tons - max. 3 t
            Description :
            Brand Huvema
            Type BL-3
            Year of make 2020
            Machine weight 29 kg
            Capacity 3 T
            Blade length 125 x 125 mm
            Plate thickness 1,5 mm



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine MEULEMAN KC10


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-35 · Notching Machine

          MEULEMAN - KC10 - - 2018 -

          Technical details
          ︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Capacity: Ø41,9 x 2,7 R21 x 8 mm Featured with: - Footpedal - User manual (NL) Airpresse machine
            Description :
            Capacity:
            Ø41,9 x 2,7
            R21 x 8 mm

            Featured with:
            - Footpedal
            - User manual (NL)

            Airpresse machine


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine HUVEMA AKM 1.6P


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003086 · Notching Machine

          HUVEMA - AKM 1.6P - - 2013 -

          Technical details
          plate thickness 1,6 mm︱pressure 450 MPa︱ 150 x 150 x 90° ︱table surface area 650 x 500 mm︱ 875 mm︱cutting angle - upper blade 4 °︱weight of the machine ca. 75 kg︱
          • manual notching machine with lower frame • sheet thickness: - steel 450MPa to 1.6 mm, - aluminium to 2.25 mm, - plastic to 3.0 mm, • machine for demonstration
            plate thickness 1,6 mm
            pressure 450 MPa
            150 x 150 x 90°
            table surface area 650 x 500 mm
            875 mm
            cutting angle - upper blade 4 °
            weight of the machine ca. 75 kg
            Description :
            • manual notching machine with lower frame
            • sheet thickness:
            - steel 450MPa to 1.6 mm,
            - aluminium to 2.25 mm,
            - plastic to 3.0 mm,
            • machine for demonstration


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine TOOLPOWER TOOLPOWER MFN 1030


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-186 · Notching Machine

          TOOLPOWER - TOOLPOWER MFN 1030 - - 2012 -

          Technical details
          gebraucht20129690Fprompt, Zwischenverkauf vChina690 €︱ 1100 mm︱ 3 mm︱ 90 °︱ 90 kg︱
          Beidseitig verstellbare Anschläge Fingerschutz Ausrüstung gemäß CE Vorschriften
            gebraucht
            2012
            9690F
            prompt, Zwischenverkauf v
            China
            690 €
            1
            100 mm
            3 mm
            90 °
            90 kg
            Description :
            Beidseitig verstellbare Anschläge
            Fingerschutz
            Ausrüstung gemäß CE Vorschriften


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine TOOLPOWER TOOLPOWER RA 1


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-413 · Notching Machine

          TOOLPOWER - TOOLPOWER RA 1 - - 2012 -

          Technical details
          gebraucht20129403prompt, Zwischenverkauf vChina180 €︱ 11/4", 3/8", 1/2" mm︱ 4 kg︱
          operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle
            gebraucht
            2012
            9403
            prompt, Zwischenverkauf v
            China
            180 €
            1
            1/4", 3/8", 1/2" mm
            4 kg
            Description :
            operation by hand lever and eccentric
            3 tube diameter combined in one
            assembling and welding of tubesin 90 degrees angle


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine BOSCHERT K30-120 MINI S


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397093 · Notching Machine

          BOSCHERT - K30-120 MINI S - - 2003 -

          Technical details
          4,0 mm︱ 3,0 mm︱ 30 - 120 Grad︱blade length 150 x 150 mm︱work height max. 900 mm︱table: 1000 x 650 mm︱engine output 3,0 kW︱weight 850 kg︱range L-W-H 1250 x 1000 x 1160 mm︱
          ** Machine like NEW (!!) Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397093
            4,0 mm
            3,0 mm
            30 - 120 Grad
            blade length 150 x 150 mm
            work height max. 900 mm
            table: 1000 x 650 mm
            engine output 3,0 kW
            weight 850 kg
            range L-W-H 1250 x 1000 x 1160 mm
            Description :
            ** Machine like NEW (!!)

            Furnishing:
            - Notching machine with angle adjustment 30° - 120°
            - Simple and functional "Touch Pad" control panel
            * Set-up stroke
            * Single stroke
            * continuous stroke
            - Plexiglas protection for better transparency
            - hardened knives also for cutting stainless steel
            - planed table surface
            * to avoid 'tilting' or 'slipping' of the metal sheet
            - adjustable lift height adjustment
            - Waste bin
            - free-moving footswitch
            - Operation manual

            BOSCHERT angle adjustment:
            - the one-piece 30° upper knife is within one tool both with a left and
            directly connected to a right lower knife
            - once for each notch over 30° left and once on the right.
            - the swivel adjustment becomes pneumatic, immediately after completion of the
            first notch, lightning fast carried out.

            * Machinelink :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397093


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine Durma VHKM 2006


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S343 · Notching Machine

          Durma - VHKM 2006 - - 2002 -

          Technical details
          Knife length 200 x 200 mm︱Plate thickness 6 mm︱Varaible angle 30-140 °︱Machine dimensions (lxwxh) 1.050 x 900 x 1.300 mm︱Machine weight 1.000 kg︱
            Knife length 200 x 200 mm
            Plate thickness 6 mm
            Varaible angle 30-140 °
            Machine dimensions (lxwxh) 1.050 x 900 x 1.300 mm
            Machine weight 1.000 kg
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine COMACA VAR 250/6


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397086 · Notching Machine

          COMACA - VAR 250/6 - - 2001 -

          Technical details
          plate thickness 6,0 mm ST︱plate thickness 4,0 mm VA︱table-size 1200 x 900 mm︱blade length 250 x 250 mm︱strokes per minute 45 min︱adjustable Winkel 30°-135° mm︱work height max. 1050 mm︱engine output 4,0 kW︱weight of the machine ca. 1.300 kg︱range L-W-H 1200 x 1350 x 1600 mm︱
          Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - 2x speeds - Inching mode for adjusting the shear blades - 2x adjustable stop rulers - Machined work table, with T-slots - free-moving footswitch - Operation manual
            plate thickness 6,0 mm ST
            plate thickness 4,0 mm VA
            table-size 1200 x 900 mm
            blade length 250 x 250 mm
            strokes per minute 45 min
            adjustable Winkel 30°-135° mm
            work height max. 1050 mm
            engine output 4,0 kW
            weight of the machine ca. 1.300 kg
            range L-W-H 1200 x 1350 x 1600 mm
            Description :
            Furnishing:
            - Robust electro-hydraulic notching machine
            - with adjustable angle, electro-hydraulic adjustment
            - 2x speeds
            - Inching mode for adjusting the shear blades
            - 2x adjustable stop rulers
            - Machined work table, with T-slots
            - free-moving footswitch
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine BOSCHERT K30-120 MINI S


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397090 · Notching Machine

          BOSCHERT - K30-120 MINI S - - 2001 -

          Technical details
          4,0 mm︱ 3,0 mm︱ 30 - 120 Grad︱blade length 150 x 150 mm︱work height max. 900 mm︱table: 1000 x 650 mm︱engine output 3,0 kW︱weight 850 kg︱range L-W-H 1250 x 1000 x 1160 mm︱
          Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - 2x staking stops * with movable and interchangeable stop bars - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30°left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397090
            4,0 mm
            3,0 mm
            30 - 120 Grad
            blade length 150 x 150 mm
            work height max. 900 mm
            table: 1000 x 650 mm
            engine output 3,0 kW
            weight 850 kg
            range L-W-H 1250 x 1000 x 1160 mm
            Description :
            Furnishing:
            - Notching machine with angle adjustment 30° - 120°
            - Simple and functional "Touch Pad" control panel
            * Set-up stroke
            * Single stroke
            * continuous stroke
            - Plexiglas protection for better transparency
            - hardened knives also for cutting stainless steel
            - planed table surface
            * to avoid 'tilting' or 'slipping' of the metal sheet
            - adjustable lift height adjustment
            - 2x staking stops
            * with movable and interchangeable stop bars
            - free-moving footswitch
            - Operation manual

            BOSCHERT angle adjustment:
            - the one-piece 30° upper knife is within one tool both with a left and
            directly connected to a right lower knife
            - once for each notch over 30°left and once on the right.
            - the swivel adjustment becomes pneumatic, immediately
            after completion of the first notch, lightning fast carried out.

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397090


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine INDUMASCH VA 200/8


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397087 · Notching Machine

          INDUMASCH - VA 200/8 - - 2001 -

          Technical details
          plate thickness 8,0 mm ST︱plate thickness 5,0 mm VA︱table-size 1000 x 950 mm︱blade length 200 x 200 mm︱strokes per minute 60 H/min︱adjustable Winkel 30°-140° mm︱work height max. ca. 950 mm︱oil volume 60 l︱engine output 4,0 kW︱weight of the machine ca. 1200 kg︱range L-W-H 1000 x 1120 x 1700 mm︱
          ** from a maintenance workshop ** New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397087
            plate thickness 8,0 mm ST
            plate thickness 5,0 mm VA
            table-size 1000 x 950 mm
            blade length 200 x 200 mm
            strokes per minute 60 H/min
            adjustable Winkel 30°-140° mm
            work height max. ca. 950 mm
            oil volume 60 l
            engine output 4,0 kW
            weight of the machine ca. 1200 kg
            range L-W-H 1000 x 1120 x 1700 mm
            Description :
            ** from a maintenance workshop
            ** New price at the time ~ 21.000 euros

            Furnishing:
            - Robust electro-hydraulic notching machine
            - with adjustable angle, electro-hydraulic adjustment
            - Adjustment by hand wheels (left + right knife segment)
            - hardened knives also for cutting stainless steel
            - front panel
            - electro-hydraulic knife clamping
            - Inching mode for setting the shear blades selectable (manual mode)
            - planed table surface, with T-slots
            * to avoid 'tilting' or 'slipping' of the metal sheet
            - 2x staking stops
            * with movable and interchangeable stop bars
            - 2x blank holders
            - 1x free moving footswitch
            - front scrap switch (collecting container)
            - Plexiglas finger protection in front, for better transparency
            - User manual (PDF)

            * Machinelink :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397087


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine EUROMAC 220/4


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92287 · Notching Machine

          EUROMAC - 220/4 - - 1999 -

          Technical details
          plate thickness 3-4 mm︱pressure 0 t︱Cutting length 220 mm︱table height 900 mm︱quantity of oil 35 l︱Table dimensions 950 x 790 mm︱total power requirement 4 kW︱weight of the machine ca. 0,95 t︱dimensions of the machine ca. 1,0 x 0,86 x 1,2 m︱
          Foot switch angle adjustment 30°-140° automatic cutting gap adjustment
            plate thickness 3-4 mm
            Cutting length 220 mm
            table height 900 mm
            quantity of oil 35 l
            Table dimensions 950 x 790 mm
            total power requirement 4 kW
            weight of the machine ca. 0,95 t
            dimensions of the machine ca. 1,0 x 0,86 x 1,2 m
            Description :
            Foot switch
            angle adjustment 30°-140°
            automatic cutting gap adjustment


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine EUROMAC MULTI 220/6 R


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397094 · Notching Machine

          EUROMAC - MULTI 220/6 R - - 1998 -

          Technical details
          plate thickness 6.5 mm︱thickness at "Niro-steel" 5.0 mm︱angle adjustable from - to 30 - 140 Grad︱no. of strokes ca. 50 Hub/min︱table: 950 x 1030 mm︱blade length 220 x 220 mm︱total power requirement 4.0 kW︱weight 800 kg︱range L-W-H 1100 x 950 x 1280 mm︱
          ** current new price approx. 25.000 euros ** Special price on request Furnishing: - electro-hydraulic notching machine - Multi-functional machine with 2x workstations * 1x notching, 1x bending station * including bending tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x angle stop, adjustable - automatic cutting gap adjustment - freely movable foot switch - Connection cable + 16A plug - Cutting performance: * 6.0 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397094
            plate thickness 6.5 mm
            thickness at "Niro-steel" 5.0 mm
            angle adjustable from - to 30 - 140 Grad
            no. of strokes ca. 50 Hub/min
            table: 950 x 1030 mm
            blade length 220 x 220 mm
            total power requirement 4.0 kW
            weight 800 kg
            range L-W-H 1100 x 950 x 1280 mm
            Description :
            ** current new price approx. 25.000 euros
            ** Special price on request

            Furnishing:
            - electro-hydraulic notching machine
            - Multi-functional machine with 2x workstations
            * 1x notching, 1x bending station
            * including bending tools
            - manual angle adjustment 30 - 140 degrees
            * 2x handwheels for angle adjustment
            - large / stable work table
            - 2x angle stop, adjustable
            - automatic cutting gap adjustment
            - freely movable foot switch
            - Connection cable + 16A plug

            - Cutting performance:
            * 6.0 mm to 60° ST
            * 5.0 mm to 60° VA
            * 4.0 mm to 30° ST
            * 3.0 mm to 30° VA

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397094


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

          TOP Manufacturer:

          ERCOLINA - SCHWARZE-WIRTZ - TRANSFLUID -