workpiece weight max. 3 kg ︱workpiece length 40 - 500 mm︱diameter 80 mm︱turning speeds max. 3000 U/min︱connected load frequency 230V 50Hz ︱total power requirement 0,5 kW︱weight of the machine ca. 220 kg︱dimensions of the machine ca. 1 x 1,5 x 2 m︱

---

We offer a small, modern balancing machine for motor anchors of the type TIRA K 3B. This machine, built in 2005, is now in November 2022 complete overhauled from specialists and can be inspected under power. The machine is calibrated and with DIN ISO Master Rotor tested and we have acceptance protocol accorting DIN VDE 0113. It can be balanced with the system in 2 levels. The balancing software is TIRA X9000 WIN. There is an operating manual for this. The balancing machine offered with machine number R08/05 821165 has one Aluminum table with a length of 260mm and clamping fixtures for shorter shafts. The rotation is running with 2 drive belts. The height of the clamping center is 90mm above the table. The maximum rotor diameter is 80mm. The bearing point diameter is between 20-50mm. The entire table has a support length of 600mm. The system is equipped with a protective device according to DIN45690. The system has the CE mark. The device comes with 4 vibration feet and a power storage APC Back-UPS ES550. Supplied with the machine is a control PC, monitor, keyboard and pneumatic installation for labor protection. If necessary, experiences or training courses can be exchanged by our balancing technology specialist (calculated according to expenditure). Come to Zella-Mehlis for inspection and testing of the general overhauled machine.

---

DITTEL balancing head type: F20439 You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

balancing body min/max. 10 kg︱balancing body diameter w/o machining unit 1000 mm︱balancing body diameter with machining unit 600 ︱turning speeds 800 U/min︱connected load 380V 50Hz ︱total power requirement 1,5 kW︱weight of the machine ca. 410 kg︱dimensions of the machine ca. 0,8 x 1,5 x 1,7 m︱

---

We offer a SCHENCK 110 CBAD vertical balancing system. This system is in good, working condition. It came from a German automotive supplier that has given up the location. With the system, workpieces with a unit weight of up to 10 kg can be processed in one measuring level unbalances are evaluated. Controlled will be the machine with Module CAB641. We gave the machine a new light gray color scheme on the outside. The Serial number is BAD 0810. Come to Giebelstadt (about 80min. from Frankfurt airport) for inspection of this machine.

throat 80 mm︱Control PC control ︱Vickers HV 0,1 / 0,3 / 1,0 mm︱total power requirement 0,1 kW︱weight of the machine ca. 100 kg︱dimensions of the machine ca. 1,0 x 0,5 x 0,5 m︱

---

We quote a VICKERS Hardness tester of type LECO M-400-H This tester is equipped with: - basic tester, adapted for HV 0,1, HV 0,3 HV 1 - with X-Y-precision table 03C0, controlled by PC - PC Shuttle X + with WINDOWS XP + Monitor + keyboard + mouce - with analysation software from PRECIDUR (13 languages can be selected) - with Kappa CF 8/1 camera - PRECIDUR Steppercontroler - lamp with Pro Micron LED Drive LX300 - icluding cables The hardness tester can be inspected under power in our company in Giebelstadt, about 80min from FRANKFURT AIRPORT. Come for inspection. Installation and training is possible by specialist. Travelling and costs must be separate calculated. Additional we can offer Hard-/Software modernization according at request.

weight 47,8 kg︱component size 5x6 mm︱

---

BÖLLHOFF return horizontal conveyor item No. 95246409574 component size 5x6mm type 03-077 or 001606850015 prepared for rivets for connecting elements unused weight 47.8kg Currently there are 3 pieces in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

x-travel 750 mm︱y-travel 120 mm︱z-travel 0 mm︱Control PC-Steuerung ︱swing diameter 240 mm︱centre distance 750 mm︱total power requirement 2 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 1,5 x 1,0 x 2,0 m︱

---

We quote an universal gear tester for shaft parts including spline testing of FRENCO. This tester from 2007 has the type URM-R HGA and is a horizontal tester with tailstock and automatic measuring cycle. There are 6 measuring heads adapted and can measure parameters like: - dimension over balls (min./max./average) - runout of gears according to centres - Excentricity - pitch deviations with correlation to excentricity The max. lenght of shaft is 750mm and max. diameter up to 240mm. There are used encoders of HEIDENHAIN and pneumatic by FESTO. Come and inspect this tester in excellent condition in our stock under power. We are about 80min. away from FRANKFURT AIRPORT.

year of construction 2015/16 -︱weight 540 g︱height of the tip 2,25 mm︱

---

MAHR CP probe arm 175-M/7.25/6/2.25 with double tip height of the tip 2.25mm in storage box with acceptance report manufactured in 2015 and 2016 unused weight 540g You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

year of construction 2012 -︱weight 398 kg︱voltage 230 V︱total current consumption 0,48 A︱capacity max. 100 VA︱frequency 50 Hz︱

---

FELDPAUSCH automatic feeder linear conveyor FS-61 with automatic organizer 0A60 for e.g. flange weld nuts with gripper system on aluminum frame type FS-61 with 0A60-R with 3x PHOENIX CONTACT Interbus motor switches IBS RL 24 DI 16/8-LK-2MBD year of construction 2012 used weight 398kg top condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.