,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Mitre saw

          Machinelist: Mitre saw


          Mitre saw

          used Saws Mitre saw GRAULE ZS 135


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5051 · Mitre saw

          GRAULE - ZS 135 - - neu -

          Technical details
          cutting width 430 mm︱Cutting height 135 mm︱Motor output 2 kW︱Dimensions (L/W/H) 1100x700x800 mm︱machine weight ab. 110 kg︱
          # 5051 Graule Crosscut Saw ZS 135, new -------------------------------------------------- ----------------------------------------------- - Crosscut and miter saw with a maximum cutting height of 135 mm - Sturdy cast iron - Precise ball bearing guide of the tool carriage on hardened and ground steel shafts - Manual feed - Rapid miter setting up to 65 ° - Re-adjustable positive stops - Lower blade guard can be connected to suction Technical specifications: --------------------------------- - Motor: 400 V / 2.0 kW - Speed: 3800 U / min - Cutting length: 440 mm (at 90 °) - Cutting height: 135 mm (at 90 °) - Miter horiz .: 45 ° -90 ° -25 ° - Saw blade Ø 350 mm - Suction 100 mm - 110 kg Crosscut and miter saws Accessories for -------------------------------------------------- ------------------------------------- All Crosscut and miter saws are in the basic equipment without blade Hydraulic feed brake (for type ZS 85 N to ZS 170 N) Price on request! Hydraulic feed brake (for type ZS 200 and ZS 200 N) Price on request! Pneumatic Sägeblattsprüheinrichtung Price on request! Pneumatic material clamping left side for types ZS 85 Price on request! Pneumatic material clamping on both sides of the top for the types ZS 135 ZS 200 N up Price on request! Pneumatic maintenance unit, consisting of water, pressure reducing valve with pressure gauge and lubricator Price on request! Pressure reducing valve with manometer Price on request! Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS 85 E, suitable for cutting cable channels, sectional area at 45 ° inclined: 72 mm x 380 mm Price on request! Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for cutting thin sheet steel channels Price on request! Machine stand for the types ZS 85 N, NS ZS 85, ZS 85 NS-SW, IS 135 and IS 170 Price on request! Machine stand for the types ZS 135 N and ZS 170 N Price on request! Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left with Scale and stop slide (for types ZS 85 N to ZS 170 N) Price on request! 3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N) Price on request! Cross ruler to cut acute angles (not type ZS 85) Price on request! Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °, 90 ° from the middle of (type ZS 170 N) Price on request! Holding device for angular aperture in Rolladenbau (only types ZS 135 ZS to 200 N) Price on request! Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting height 215 mm for the Rolladenbau Price on request! Digital angle display for horizontal angle adjustment Price on request! Digital angle indicator for horizontal and vertical angle adjustment (both sides tiltable only in conjunction with machine) Price on request! Laser device, laser beam of about 300 mm line length Price on request! Hydropneumatic feed unit with two-hand safety control (only for the application of aluminum machining) Price on request! Motorized miter for horizontal and vertical angle adjustment with nominal / actual display Price on request! Motorized miter for horizontal angle adjustment with nominal / actual display Price on request! Motorized miter for vertical angle adjustment with nominal / actual display Price on request! Chip bag with zipper for emptying (Machine type) Price on request! Suction mobile with 2.5 mtr. Hose, 400 V (not allowed in the commercial sector for wood dust) Price on request! Suction mobile with 2.5 mtr. Hose, 400 V clean air system with Approval "H2" Price on request! Automatic switch for machine with suction system Price on request! Special cutting lengths up to approx 600 mm on request Blades: --------------------- HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg Price on request! HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg Price on request! HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ neg (short service life) Price on request! HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg Price on request! HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg Price on request! HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg Price on request! HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg Price on request! HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg Price on request! HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg Price on request! HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg Price on request! HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg Price on request! HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg Price on request! techn. Details according to manufacturer - ohn guarantee! All genes mentioned here prices are excl. Of VAT currently valid. (Domestic)
            cutting width 430 mm
            Cutting height 135 mm
            Motor output 2 kW
            Dimensions (L/W/H) 1100x700x800 mm
            machine weight ab. 110 kg
            Description :
            # 5051 Graule Crosscut Saw ZS 135, new
            --------------------------------------------------
            -----------------------------------------------

            - Crosscut and miter saw with a maximum cutting height of 135 mm
            - Sturdy cast iron
            - Precise ball bearing guide of the tool carriage on hardened and ground steel
            shafts
            - Manual feed
            - Rapid miter setting up to 65 °
            - Re-adjustable positive stops
            - Lower blade guard can be connected to suction

            Technical specifications:
            ---------------------------------

            - Motor: 400 V / 2.0 kW
            - Speed: 3800 U / min
            - Cutting length: 440 mm (at 90 °)
            - Cutting height: 135 mm (at 90 °)
            - Miter horiz .: 45 ° -90 ° -25 °
            - Saw blade Ø 350 mm
            - Suction 100 mm
            - 110 kg

            Crosscut and miter saws Accessories for
            --------------------------------------------------
            -------------------------------------
            All Crosscut and miter saws are in the basic equipment without blade

            Hydraulic feed brake (for type ZS 85 N to ZS 170 N)
            Price on request!

            Hydraulic feed brake (for type ZS 200 and ZS 200 N)
            Price on request!

            Pneumatic Sägeblattsprüheinrichtung
            Price on request!

            Pneumatic material clamping left side for types ZS 85
            Price on request!

            Pneumatic material clamping on both sides of the top for the types ZS 135 ZS
            200 N up
            Price on request!

            Pneumatic maintenance unit, consisting of water, pressure reducing valve with
            pressure gauge and lubricator
            Price on request!

            Pressure reducing valve with manometer
            Price on request!

            Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS
            85 E,
            suitable for cutting cable channels, sectional area at 45 ° inclined: 72 mm x
            380 mm
            Price on request!

            Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for
            cutting thin sheet steel channels
            Price on request!

            Machine stand for the types ZS 85 N, NS ZS 85, ZS 85 NS-SW, IS 135 and IS 170
            Price on request!

            Machine stand for the types ZS 135 N and ZS 170 N
            Price on request!

            Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left
            with
            Scale and stop slide (for types ZS 85 N to ZS 170 N)
            Price on request!

            3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N)
            Price on request!

            Cross ruler to cut acute angles (not type ZS 85)
            Price on request!

            Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °, 90
            ° from the middle of (type ZS 170 N)
            Price on request!

            Holding device for angular aperture in Rolladenbau (only types ZS 135 ZS to 200
            N)
            Price on request!

            Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting
            height 215 mm for the Rolladenbau
            Price on request!

            Digital angle display for horizontal angle adjustment
            Price on request!

            Digital angle indicator for horizontal and vertical angle adjustment (both
            sides tiltable only in conjunction with machine)
            Price on request!

            Laser device, laser beam of about 300 mm line length
            Price on request!

            Hydropneumatic feed unit with two-hand safety control (only for the application
            of aluminum machining)
            Price on request!

            Motorized miter for horizontal and vertical angle adjustment with nominal /
            actual display
            Price on request!

            Motorized miter for horizontal angle adjustment with nominal / actual display
            Price on request!

            Motorized miter for vertical angle adjustment with nominal / actual display
            Price on request!

            Chip bag with zipper for emptying (Machine type)
            Price on request!

            Suction mobile with 2.5 mtr. Hose, 400 V (not allowed in the commercial sector
            for wood dust)
            Price on request!

            Suction mobile with 2.5 mtr. Hose, 400 V clean air system with Approval "H2"
            Price on request!

            Automatic switch for machine with suction system
            Price on request!

            Special cutting lengths up to approx 600 mm on request


            Blades:
            ---------------------
            HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg
            Price on request!

            HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ
            neg (short service life)
            Price on request!

            HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg
            Price on request!

            HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg
            Price on request!

            HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg
            Price on request!

            HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg
            Price on request!

            HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg
            Price on request!

            techn. Details according to manufacturer - ohn guarantee!
            All genes mentioned here prices are excl. Of VAT currently valid. (Domestic)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Mitre saw GRAULE ZS 170 N


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5052 · Mitre saw

          GRAULE - ZS 170 N - - neu -

          Technical details
          cutting width 420 mm︱Cutting height ja mm︱Motor output 2 kW︱Cutting height at 45° 115 mm︱Dimensions (L/W/H) 1100x700x800 mm︱machine weight ab. 150 kg︱
          # 5052 Graule cutting and miter saw ZS 170 N, new -------------------------------------------------- ------------------------------ ----------------- - Crosscut and miter saw with a maximum cutting height of 170 mm - Cast iron construction - Precise ball bearing guide of the tool carrier on hardened and grinded steel shafts - Manual feed - Rapid miter setting up to 65 ° horizontally and 45 ° vertically (up 60 ° ZS 200N) - Re-adjustable positive stops - Lower blade guard can be connected to suction Technical Specifications: --------------------------------- - Motor: 400 V / 2.0 kW - Speed: 3500 U / min - Cutting length: 430 mm (at 90 °) - Cutting height: 170 mm (at 90 °) - Miter horiz .: 45 ° -90 ° -25 ° - Miter verti .: 90 ° -45 ° (left) - Saw blade Ø 420 mm - Suction 100 mm - 120 kg Accessories for Crosscut and miter saws -------------------------------------------------- ------------------------------ ------- All Crosscut and miter saws are the basic equipment without Sawblade Hydraulic feed brake (for type ZS 85 N to ZS 170 N) Price On Request! Hydraulic feed brake (for type ZS 200 and ZS 200 N) Price On Request! Pneumatic Sägeblattsprüheinrichtung Price On Request! Pneumatic material clamping left side for types ZS 85 Price On Request! Pneumatic material clamping on both sides of the top for the types ZS 135 to ZS 200 N Price On Request! Pneumatic maintenance unit, consisting of water, Pressure reducing valve with pressure gauge and lubricator Price On Request! Pressure reducing valve with pressure gauge Price On Request! Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS 85 E, suitable inclined to cut cable ducts Cutting Capacity at 45 °: 72 mm x 380 mm Price On Request! Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for Cutting of thin-walled sheet steel channels Price On Request! Machine stand for the types ZS 85N, ZS 85 NS, ZS 85 NS-SW, ZS 135 and ZS 170 Price On Request! Machine stand for the types ZS 135 N and ZS 170 N Price On Request! Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left Page Scale and stop slide (for types ZS 85 N to ZS 170 N) Price On Request! 3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N) Price On Request! Cross ruler to cut acute angles (not type ZS 85) Price On Request! Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °, from mid 90 ° (only type ZS 170 N) Price On Request! Holding device for angular aperture in Rolladenbau (only types ZS 135 to ZS 200 N) Price On Request! Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting height 215 mm for the Rolladenbau Price On Request! Digital angle display for horizontal angle adjustment Price On Request! Digital angle indicator for horizontal and vertical angle adjustment (only in conjunction with machine on both sides tiltable) Price On Request! Laser device, laser beam with about 300 mm line length Price On Request! Hydropneumatic feed unit with two-hand safety control (only for the application range of aluminum machining) Price On Request! Motorized miter for horizontal and vertical angle adjustment with target / actual display Price On Request! Motorized miter for horizontal angle adjustment with Target / actual display Price On Request! Motorized miter for vertical angle adjustment with Target / actual display Price On Request! Chip bag with zipper for emptying (Machine type) Price On Request! Suction mobile 2.5 mtr. Hose, 400 V (in the commercial sector Wood dust is not allowed) Price On Request! Suction mobile 2.5 mtr. Hose, 400 V system with clean air Approval "H2" Price On Request! Automatic switch for machine with suction system Price On Request! Special cutting lengths up to approx 600 mm on request Blades: --------------------- HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg Price On Request! HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ neg (short service life) Price On Request! HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg Price On Request! HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg Price On Request! HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg Price On Request! HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg Price On Request! HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg Price On Request! HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg Price On Request! techn. Details according to manufacturer - ohn guarantee! All genes mentioned here prices are excl. Of VAT currently valid. (Inland)
            cutting width 420 mm
            Cutting height ja mm
            Motor output 2 kW
            Cutting height at 45° 115 mm
            Dimensions (L/W/H) 1100x700x800 mm
            machine weight ab. 150 kg
            Description :
            # 5052 Graule cutting and miter saw ZS 170 N, new
            --------------------------------------------------
            ------------------------------
            -----------------

            - Crosscut and miter saw with a maximum cutting height of 170 mm
            - Cast iron construction
            - Precise ball bearing guide of the tool carrier on hardened and
            grinded steel shafts
            - Manual feed
            - Rapid miter setting up to 65 ° horizontally and 45 ° vertically (up
            60 ° ZS 200N)
            - Re-adjustable positive stops
            - Lower blade guard can be connected to suction

            Technical Specifications:
            ---------------------------------

            - Motor: 400 V / 2.0 kW
            - Speed: 3500 U / min
            - Cutting length: 430 mm (at 90 °)
            - Cutting height: 170 mm (at 90 °)
            - Miter horiz .: 45 ° -90 ° -25 °
            - Miter verti .: 90 ° -45 ° (left)
            - Saw blade Ø 420 mm
            - Suction 100 mm
            - 120 kg


            Accessories for Crosscut and miter saws
            --------------------------------------------------
            ------------------------------
            -------
            All Crosscut and miter saws are the basic equipment without
            Sawblade

            Hydraulic feed brake (for type ZS 85 N to ZS 170 N)
            Price On Request!

            Hydraulic feed brake (for type ZS 200 and ZS 200 N)
            Price On Request!

            Pneumatic Sägeblattsprüheinrichtung
            Price On Request!

            Pneumatic material clamping left side for types ZS 85
            Price On Request!

            Pneumatic material clamping on both sides of the top for the types ZS 135 to ZS
            200 N
            Price On Request!

            Pneumatic maintenance unit, consisting of water,
            Pressure reducing valve with pressure gauge and lubricator
            Price On Request!

            Pressure reducing valve with pressure gauge
            Price On Request!

            Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS
            85 E,
            suitable inclined to cut cable ducts Cutting Capacity at 45 °: 72 mm
            x 380 mm
            Price On Request!

            Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for
            Cutting of thin-walled sheet steel channels
            Price On Request!

            Machine stand for the types ZS 85N, ZS 85 NS, ZS 85 NS-SW, ZS 135 and ZS
            170
            Price On Request!

            Machine stand for the types ZS 135 N and ZS 170 N
            Price On Request!

            Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left
            Page
            Scale and stop slide (for types ZS 85 N to ZS 170 N)
            Price On Request!

            3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N)
            Price On Request!

            Cross ruler to cut acute angles (not type ZS 85)
            Price On Request!

            Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °,
            from mid 90 ° (only type ZS 170 N)
            Price On Request!

            Holding device for angular aperture in Rolladenbau (only types ZS 135 to ZS
            200 N)
            Price On Request!

            Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting
            height
            215 mm for the Rolladenbau
            Price On Request!

            Digital angle display for horizontal angle adjustment
            Price On Request!

            Digital angle indicator for horizontal and vertical angle adjustment (only
            in conjunction with machine on both sides tiltable)
            Price On Request!

            Laser device, laser beam with about 300 mm line length
            Price On Request!

            Hydropneumatic feed unit with two-hand safety control (only for
            the application range of aluminum machining)
            Price On Request!

            Motorized miter for horizontal and vertical angle adjustment
            with target / actual display
            Price On Request!

            Motorized miter for horizontal angle adjustment with
            Target / actual display
            Price On Request!

            Motorized miter for vertical angle adjustment with
            Target / actual display
            Price On Request!

            Chip bag with zipper for emptying (Machine type)
            Price On Request!

            Suction mobile 2.5 mtr. Hose, 400 V (in the commercial sector
            Wood dust is not allowed)
            Price On Request!

            Suction mobile 2.5 mtr. Hose, 400 V system with clean air
            Approval "H2"
            Price On Request!

            Automatic switch for machine with suction system
            Price On Request!

            Special cutting lengths up to approx 600 mm on request


            Blades:
            ---------------------
            HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg
            Price On Request!

            HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ
            neg (short service life)
            Price On Request!

            HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg
            Price On Request!

            HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg
            Price On Request!

            HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg
            Price On Request!

            HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg
            Price On Request!

            HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg
            Price On Request!

            techn. Details according to manufacturer - ohn guarantee!
            All genes mentioned here prices are excl. Of VAT currently valid.
            (Inland)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Mitre saw HBM 305 x 108


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-85121 · Mitre saw

          HBM - 305 x 108 - - -

          Technical details
          saw-blade dia. 305 mm︱Cutting height 105 x 340 mm︱Cutting height at 45° 60 x 340 mm︱saw blade turning speeds 5000 U/min︱Motor output 2,0 kW︱machine weight ab. 25 kg︱Dimensions (L/W/H) 700 x 570 x 980 mm︱
          Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports
            saw-blade dia. 305 mm
            Cutting height 105 x 340 mm
            Cutting height at 45° 60 x 340 mm
            saw blade turning speeds 5000 U/min
            Motor output 2,0 kW
            machine weight ab. 25 kg
            Dimensions (L/W/H) 700 x 570 x 980 mm
            Description :
            Cross-cut saw
            The machine is equipped with many adjustment options and tools to support and
            secure the workpiece to be cut.
            A line laser indicates where the cut should be made.
            The protective cover folds away automatically.
            Delivery including:
            saw blade (installed)
            6mm allen key
            anthers
            2x side supports


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Mitre saw HBM 215 x 70


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-85120 · Mitre saw

          HBM - 215 x 70 - - -

          Technical details
          saw-blade dia. 210 mm︱Cutting height 70 x 305 mm︱Cutting height at 45° 35 x 305 mm︱saw blade turning speeds 4500 U/min︱Motor output 1,5 kW︱machine weight ab. 9 kg︱Dimensions (L/W/H) 340 x 500 x 740 mm︱
          Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports
            saw-blade dia. 210 mm
            Cutting height 70 x 305 mm
            Cutting height at 45° 35 x 305 mm
            saw blade turning speeds 4500 U/min
            Motor output 1,5 kW
            machine weight ab. 9 kg
            Dimensions (L/W/H) 340 x 500 x 740 mm
            Description :
            Cross-cut saw
            The machine is equipped with many adjustment options and tools to support and
            secure the workpiece to be cut.
            A line laser indicates where the cut should be made.
            The protective cover folds away automatically.
            Delivery including:
            saw blade (installed)
            6mm allen key
            anthers
            2x side supports


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical panel saw

          used Saws Vertical panel saw HOLZ-HER 1205


          • Bort&Herkert GmbH
          • Ringstraße 43-45
          • 74626 Bretzfeld
          • Deutschland

          • +49 (0) 7946/9278-0
            +49 (0) 7946/9278-99
          • info@bort-herkert.de
            www.bort-herkert.de
          #1325-20998 · Vertical panel saw

          HOLZ-HER - 1205 - - unbekannt -

          Technical details
          Cutting length 4300 mm︱Cutting height 1925 mm︱automatic nein ja/nein︱
            Cutting length 4300 mm
            Cutting height 1925 mm
            automatic nein ja/nein


        • Bort&Herkert GmbH
        • Ringstraße 43-45
        • 74626 Bretzfeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw ELCON Advance 215


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6777 · Vertical panel saw

          ELCON - Advance 215 - - Neu -

          Technical details
          Cutting length 5300 mm︱Cutting height 0-2.150, 80-2.050 mm︱automatic Option ja/nein︱
          ELCON precision panel saw type ADVANCE 215 Partnership Edition -------------------------------------- Technical description: Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mm Cutting length: 5,300mm Cutting depth: 80mm (with clamps: 55mm) Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth Saw blade rotation: 5,000 rpm. Motor: 5.5 kW, including automatic star-delta start Required air pressure: 6 bar Measurement reading for horizontal saw cuts: -over scale from 0 - 2,070mm -via strip cutting stop from 75 - 500mm Measurement reading for vertical saw cuts: -over scale from 0 - 1,300mm Extraction connection: 1 x 100mm 1 x 120mm Features: -ADVANCE clamping system, consisting of: 2 pneumatic clamps, those on vertical axes are motorized on a ball screw from above move down. The tongs carry plates weighing max. 150 kg - Torsion-free, free-standing machine frame -Round rod guide, vertical and horizontal -pneumatically yielding slatted frame -Finely adjustable folding stop with stop extension -Fine adjustment for horizontal saw cuts via hand wheel -Strip cutting stop -Manual programming rail with 5 sliding blocks -Pneumatic immersion of the saw unit -25 material support rolls -1 infeed and 1 outfeed roller -pneumatic workpiece clamping device between the support rollers -3 central support elements, folding out pneumatically -Pneumatic saw head locking -Control panel with document holder -Switch unit on the saw unit: start button, stop button -Tool cabinet -Lighting scale for vertical saw cuts Partnership Edition Features: -Digital display for the folding stop -Digital display for the saw unit with incremental function -pneumatically swiveling saw unit -Scoring system with controlled counter-air nozzle, numerical display for scoring or groove depth adjustment and activation light -Cutting line laser -------------------------------------- Special price "Partnership Edition" ex works in this version: on request! -------------------------------------- Freight, installation and instruction costs (if the machine is not must be dismantled) - only applies within Germany. unloading and Lateral transport to the installation site is carried out by the customer. Price: EUR 2,750.00 plus statutory VAT -------------------------------------- Options with extra charge: Equipment package II - automatic feed: -Automatic feed with infinitely variable speed from 0-20m/min. -Adjustment of the traverse path to the workpiece size -Touch screen screen -Horizontal section positioning -automatic trimming process Price: EUR 14,990.00 plus statutory VAT Equipment package III (based on package II), consisting of: - Positioning and programmable folding stop - automatic interface positioning saw tree - Coupling of the two axes (e.g.: input 2,700mm, the stop moves up 700mm, the saw tree moves to the interface 2) Price: EUR 9,590.00 plus statutory VAT Cutting length 4,300mm instead of 5,300mm Price: EUR 0.00 plus statutory VAT ADVANCE clamping system with 3 clamps instead of 2 clamps, max. weight of the plate: 225 kg Price: EUR 8,890.00 plus statutory VAT Additional workpiece clamping device Price: EUR 590.00 plus statutory VAT 3 pneumatically usable plate setting buffers with switches on the machine frame Price: EUR 990.00 plus statutory VAT GERONNIMO plate wagon Price: EUR 1,490.00 plus statutory VAT GERONNE terminal, including: cutting optimization, operating instructions, Spare parts list and charger (without machine connection) Price: EUR 590.00 plus statutory VAT ----------------------------------------------------- Technical information according to the manufacturer - without guarantee!
            Cutting length 5300 mm
            Cutting height 0-2.150, 80-2.050 mm
            automatic Option ja/nein
            Description :
            ELCON precision panel saw type ADVANCE 215 Partnership Edition
            --------------------------------------
            Technical description:
            Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mm
            Cutting length: 5,300mm
            Cutting depth: 80mm (with clamps: 55mm)
            Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth
            Saw blade rotation: 5,000 rpm.
            Motor: 5.5 kW, including automatic star-delta start
            Required air pressure: 6 bar
            Measurement reading for horizontal saw cuts:
            -over scale from 0 - 2,070mm
            -via strip cutting stop from 75 - 500mm
            Measurement reading for vertical saw cuts:
            -over scale from 0 - 1,300mm
            Extraction connection: 1 x 100mm 1 x 120mm

            Features:
            -ADVANCE clamping system, consisting of: 2 pneumatic clamps,
            those on vertical axes are motorized on a ball screw from above
            move down. The tongs carry plates weighing
            max. 150 kg
            - Torsion-free, free-standing machine frame
            -Round rod guide, vertical and horizontal
            -pneumatically yielding slatted frame
            -Finely adjustable folding stop with stop extension
            -Fine adjustment for horizontal saw cuts via hand wheel
            -Strip cutting stop
            -Manual programming rail with 5 sliding blocks
            -Pneumatic immersion of the saw unit
            -25 material support rolls
            -1 infeed and 1 outfeed roller
            -pneumatic workpiece clamping device between the support rollers
            -3 central support elements, folding out pneumatically
            -Pneumatic saw head locking
            -Control panel with document holder
            -Switch unit on the saw unit: start button, stop button
            -Tool cabinet
            -Lighting scale for vertical saw cuts

            Partnership Edition Features:
            -Digital display for the folding stop
            -Digital display for the saw unit with incremental function
            -pneumatically swiveling saw unit
            -Scoring system with controlled counter-air nozzle, numerical display for
            scoring
            or groove depth adjustment and activation light
            -Cutting line laser
            --------------------------------------
            Special price "Partnership Edition" ex works in this version: on request!
            --------------------------------------
            Freight, installation and instruction costs (if the machine is not
            must be dismantled) - only applies within Germany. unloading and
            Lateral transport to the installation site is carried out by the customer.
            Price: EUR 2,750.00 plus statutory VAT
            --------------------------------------
            Options with extra charge:

            Equipment package II - automatic feed:
            -Automatic feed with infinitely variable speed from
            0-20m/min.
            -Adjustment of the traverse path to the workpiece size
            -Touch screen screen
            -Horizontal section positioning
            -automatic trimming process
            Price: EUR 14,990.00 plus statutory VAT

            Equipment package III (based on package II), consisting of:
            - Positioning and programmable folding stop
            - automatic interface positioning saw tree
            - Coupling of the two axes (e.g.: input 2,700mm, the stop moves up
            700mm, the saw tree moves to the interface 2)
            Price: EUR 9,590.00 plus statutory VAT

            Cutting length 4,300mm instead of 5,300mm
            Price: EUR 0.00 plus statutory VAT

            ADVANCE clamping system with 3 clamps instead of 2 clamps, max. weight of the
            plate: 225
            kg
            Price: EUR 8,890.00 plus statutory VAT

            Additional workpiece clamping device
            Price: EUR 590.00 plus statutory VAT

            3 pneumatically usable plate setting buffers with switches on the machine frame
            Price: EUR 990.00 plus statutory VAT

            GERONNIMO plate wagon
            Price: EUR 1,490.00 plus statutory VAT

            GERONNE terminal, including: cutting optimization, operating instructions,
            Spare parts list and charger (without machine connection)
            Price: EUR 590.00 plus statutory VAT
            -----------------------------------------------------
            Technical information according to the manufacturer - without guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw ELCON D 215 Partnership Edition


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6769 · Vertical panel saw

          ELCON - D 215 Partnership Edition - - Neu -

          Technical details
          Cutting length 4300 mm︱Cutting height 2150 mm︱automatic ,
          ELCON precision panel saw type D 215 ----------------------------------------------------- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----------------------------------------------------- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length, individually manually fold out -Scoring system: double cut of the main saw blade - Torsion-free, free-standing machine frame -Two folding stops for vertical saw cuts (above and below the middle support) ----------------------------------------------------- Special price "Partnership Edition" ex works in this version: on request! ----------------------------------------------------- plus pre-freight, freight, installation and instruction (if the machine does not have to be dismantled) Applies only within Germany. Unloading and cross transport to Installation location is determined by the customer. Price: EUR 1,900.00 plus statutory VAT ----------------------------------------------------- Options with extra charge: Cutting length 5,300mm instead of 4,300mm Order number: ELCO0075/O049 Surcharge: EUR 2,590.00 plus statutory VAT ----------------------------------------------------- Technical information according to the manufacturer - without guarantee!
            Cutting length 4300 mm
            Cutting height 2150 mm
            automatic ,
            Description :
            ELCON precision panel saw type D 215
            -----------------------------------------------------
            Cutting height: vertical 2,150mm, horizontal 2,100mm
            Cutting length: 4,300mm
            -----------------------------------------------------
            Technical description:

            Cutting depth: max. 60mm
            Saw blade outlet behind the plate: max. 25mm
            Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth
            Saw blade rotation: 5,100 rpm.
            Motor: 4 kW (S 6)

            Measurement reading for:
            horizontal saw cuts: via scale and strip cutting stop
            vertical saw cuts: above scale
            Extraction nozzle: 100 & 80mm
            Required air pressure: 6 bar

            Features:
            -Material support with 1 roll per meter of cutting length, switched on and off
            by foot pedal
            suspendable
            -1 infeed and outfeed roller
            -pneumatically yielding slatted frame
            -Central support, 1 support element per meter of cutting length, individually
            manually
            fold out
            -Scoring system: double cut of the main saw blade
            - Torsion-free, free-standing machine frame
            -Two folding stops for vertical saw cuts (above and
            below the middle support)
            -----------------------------------------------------
            Special price "Partnership Edition" ex works in this version: on request!
            -----------------------------------------------------

            plus pre-freight, freight, installation and instruction
            (if the machine does not have to be dismantled)
            Applies only within Germany.
            Unloading and cross transport to
            Installation location is determined by the customer.

            Price: EUR 1,900.00 plus statutory VAT
            -----------------------------------------------------
            Options with extra charge:

            Cutting length 5,300mm instead of 4,300mm
            Order number: ELCO0075/O049

            Surcharge: EUR 2,590.00 plus statutory VAT
            -----------------------------------------------------

            Technical information according to the manufacturer - without guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw HOLZHER 1215 Super Cut


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-716138 · Vertical panel saw

          HOLZHER - 1215 Super Cut - - 1992 -

          Technical details
          Cutting length 2200 mm︱Cutting height 30 mm︱automatic nein ja/nein︱
            Cutting length 2200 mm
            Cutting height 30 mm
            automatic nein ja/nein


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          HBM - GRAULE -