,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Plants complete

          Machinelist: Plants, complete


          Plants, complete

          used Production Lines Plants, complete  ITW Mima Oktopus Junior


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G181101 · Plants, complete

          ITW Mima - Oktopus Junior - - 2004 -

          Technical details



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Production Lines Plants, complete Berstorff Mikrowellen/Heissluft Kanal


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220101 · Plants, complete

          Berstorff - Mikrowellen/Heissluft Kanal - - 1996 -

          Technical details

          Condition: used - in production until approx. middle of February 2022 Specification: microwave vulcanizing line hot air channel with microwave Conversion to S7 control, 2015 - microwave vulcanizing line: MW24/HL 12x2/KK09/RA - Type: MW 24.1-200.075 - Channel length microwave approx.: 17.170 mm - Microwave feed: Number of HF generators: 4 Power per HF generator: max. 6 kW power setting: 0 / 10 - 100% Frequency of the HF generators: 2450 - 2470 MHz - channel length hot air approx.: 26.170 mm - Air heating: Number of heating zones: 3 Power per heating zone: 9,9 kW Heating zones gas heated channel air temperature max.: 250°C at the injection point - Cooling basin length approx.: 15,000 mm - belt width: 105 to 200 mm, per station - Transpot belt height approx.: 1,100 mm - number of belts: 1 - transport speed: 1 - 30 m/min - Voltage: 3 x 400 V, 50 Hz - Control voltage: 230 V, 50 Hz/ 24 V DC - Material running direction: from right to left - Conversion to Siemens S7 control was made in 2015 Documentation in German language available. plant will be available from approx. kW 7/2022. A second identical system will be available from kW 11/2022, but with the material material flow direction from left to right. In this second the control panel is defective. However, it can be repaired at Siemens.
            Description :
            Condition: used - in production
            until approx. middle of February 2022

            Specification: microwave vulcanizing line
            hot air channel with microwave
            Conversion to S7 control, 2015

            - microwave vulcanizing line: MW24/HL 12x2/KK09/RA
            - Type: MW 24.1-200.075
            - Channel length microwave approx.: 17.170 mm
            - Microwave feed:
            Number of HF generators: 4
            Power per HF generator: max. 6 kW
            power setting: 0 / 10 - 100%
            Frequency of the HF generators: 2450 - 2470 MHz
            - channel length hot air approx.: 26.170 mm
            - Air heating:
            Number of heating zones: 3
            Power per heating zone: 9,9 kW
            Heating zones gas heated
            channel air temperature max.: 250°C at the injection point
            - Cooling basin length approx.: 15,000 mm
            - belt width: 105 to 200 mm, per station
            - Transpot belt height approx.: 1,100 mm
            - number of belts: 1
            - transport speed: 1 - 30 m/min
            - Voltage: 3 x 400 V, 50 Hz
            - Control voltage: 230 V, 50 Hz/ 24 V DC
            - Material running direction: from right to left
            - Conversion to Siemens S7 control was made in 2015

            Documentation in German language available.

            plant will be available from approx. kW 7/2022. A second
            identical system will be available from kW 11/2022, but with the material
            material flow direction from left to right. In this second
            the control panel is defective.
            However, it can be repaired at Siemens.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Production Lines Plants, complete Berstorff Compoundieranlage ZE 40 A


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210301 · Plants, complete

          Berstorff Compoundieranlage - ZE 40 A - - 1993 - 2004 -

          Technical details

          Condition: used Specification: compounding plant with underwater pelletising system and drying system second-hand - consisting of: Pos 1, extruder system - Berstorff ZE 40 A - year of construction: 1993 - screw diameter: 43 mm - segmented screw and barrel - length: 1 screw pair each - L/D 33,5 - L/D 39,5 - Screw speed max.: 500 rpm - Screw torque: 400 Nm - DC motor with tachogenerator - Drive power: 42 kW - Rated speed: 2,500 rpm - Electrical connection: 340/460 V - Motor was completely overhauled in 2015 - Control: Siemens S7-300 was completely reprogrammed - New cylinder still available: 2 pcs. 6D-cylinder with cooling; 1 pc. 1,5D-intermediate plate - 1 side feeder (screw diameter 34 mm) - Seitenbeschickung fahrbar - various strand nozzle heads - Visualisation: WinCC Pos 2, underwater pelletising system - Make Gala Model 6 - Year of manufacture: 2001 - speed: 500 to 3.600 rpm - additional, overhauled motor Pos 3, Dryer system: - Make Econ Type: EWT 250 - year of construction: 2015 - incl. pipe system Pos 4, screen changing and starting device: - Make: Trendelkamp, Type: TASD 4L - Year of construction: 2004 - Filter inserts: 1 - Filter area: 110 cm² - Extrusion capacity approx.: 180 - 500 kg/h - Heating capacity: 4x 1.000 W - Hydraulic power: 7,5 kW - Delivery volume: 3,6 l/min - Condition of bolts: several grooves Pos 5, dosing (gravimetric) - Make: K-Tron - Year of construction: 2001 - 2 dosing units: Type: K2-ML-S60 (single screw) Type K2-ML-T35 (double screw) - hanging system - Control unit: 2x KSU (control of the feeders via extruder display possible) Pos 6, System control/visualisation
            Description :
            Condition: used

            Specification: compounding plant with underwater pelletising system
            and drying system
            second-hand - consisting of:

            Pos 1, extruder system
            - Berstorff ZE 40 A
            - year of construction: 1993
            - screw diameter: 43 mm
            - segmented screw and barrel
            - length: 1 screw pair each
            - L/D 33,5
            - L/D 39,5
            - Screw speed max.: 500 rpm
            - Screw torque: 400 Nm
            - DC motor with tachogenerator
            - Drive power: 42 kW
            - Rated speed: 2,500 rpm
            - Electrical connection: 340/460 V
            - Motor was completely overhauled in 2015
            - Control: Siemens S7-300
            was completely reprogrammed
            - New cylinder still available: 2 pcs. 6D-cylinder with cooling;
            1 pc. 1,5D-intermediate plate
            - 1 side feeder (screw diameter 34 mm)
            - Seitenbeschickung fahrbar
            - various strand nozzle heads
            - Visualisation: WinCC

            Pos 2, underwater pelletising system
            - Make Gala Model 6
            - Year of manufacture: 2001
            - speed: 500 to 3.600 rpm
            - additional, overhauled motor

            Pos 3, Dryer system:
            - Make Econ Type: EWT 250
            - year of construction: 2015
            - incl. pipe system

            Pos 4, screen changing and starting device:
            - Make: Trendelkamp, Type: TASD 4L
            - Year of construction: 2004
            - Filter inserts: 1
            - Filter area: 110 cm²
            - Extrusion capacity approx.: 180 - 500 kg/h
            - Heating capacity: 4x 1.000 W
            - Hydraulic power: 7,5 kW
            - Delivery volume: 3,6 l/min
            - Condition of bolts: several grooves

            Pos 5, dosing (gravimetric)
            - Make: K-Tron
            - Year of construction: 2001
            - 2 dosing units:
            Type: K2-ML-S60 (single screw)
            Type K2-ML-T35 (double screw)
            - hanging system
            - Control unit: 2x KSU
            (control of the feeders via extruder display possible)



            Pos 6, System control/visualisation



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Production Lines Plants, complete GERLACH 3-Etagen Heizkanal


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G180201 · Plants, complete

          GERLACH - 3-Etagen Heizkanal - - n.b. -

          Technical details



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Production Lines Plants, complete GERLACH Heizkanal HLK 150-1-110-12m


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210601 · Plants, complete

          GERLACH - Heizkanal HLK 150-1-110-12m - - 2003 -

          Technical details

          Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7
            Description :
            Condition: used,

            Specification: 12m heating duct incl. PCT

            - length approx.: 12.000 mm
            - extrusion height: 1.100 mm
            - extrusion direction: from right to left
            - belt width: 150 mm
            - Channel width: 190 mm
            - At the inlet and outlet there is a 50 kW burner each
            - In the PCT there is a 70 kW burner
            - Temperature range: 240°C to 340°C
            - Heating: gas heated
            - Belt speed: 2-40 m/min
            - Control: Siemens S7



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Production Lines Plants, complete GERLACH Heizkanal HLK 150-1-110-12m


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220402 · Plants, complete

          GERLACH - Heizkanal HLK 150-1-110-12m - - 2003 -

          Technical details
          machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 170 kW︱
          Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022.
            machine measurements Länge ca. 12.000 mm
            machine weight -- kg
            power capacity 170 kW
            Description :
            Condition: used,

            Specification: 12m heating duct incl. PCT

            - length approx.: 12.000 mm
            - extrusion height: 1.100 mm
            - extrusion direction: from right to left
            - belt width: 150 mm
            - Channel width: 190 mm
            - At the inlet and outlet there is a 50 kW burner each
            - In the PCT there is a 70 kW burner
            - Temperature range: 240°C to 340°C
            - Heating: gas heated
            - Belt speed: 2-40 m/min
            - Control: Siemens S7

            Relocation date no later than mid-June 2022.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Production Lines Plants, complete GERLACH Nachheizkanal


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210603 · Plants, complete

          GERLACH - Nachheizkanal - - 1989 -

          Technical details

          Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Heating: gas heated - Control system: Siemens - The channel was extended by 2x 3m segments in 2016 - The burners were renewed in 2016
            Description :
            Condition: used,

            Specification: 21m post-heating duct with heat exchanger

            - length approx.: 21.000 mm
            - consisting of: 21.000 mm heating channel, incl. heat exchanger
            - extrusion height: 1.100 mm
            - Extrusion direction: from right to left
            - 4x burners with 50kW burner each
            - Heating: gas heated
            - Control system: Siemens
            - The channel was extended by 2x 3m segments in 2016
            - The burners were renewed in 2016



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Production Lines Plants, complete GERLACH Nachheizkanal


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220403 · Plants, complete

          GERLACH - Nachheizkanal - - 1989/2015 -

          Technical details
          machine measurements Länge ca. 21.000 mm︱machine weight -- kg︱power capacity 200 kW︱
          Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015
            machine measurements Länge ca. 21.000 mm
            machine weight -- kg
            power capacity 200 kW
            Description :
            Condition: used,

            Specification: 21m post-heating duct with heat exchanger

            - length approx.: 21.000 mm
            - consisting of: 21.000 mm heating channel, incl. heat exchanger
            - extrusion height: 1.100 mm
            - Extrusion direction: from right to left
            - 4x burners with 50kW burner each
            - Tempering range: 240°C - 340°C
            - Heating: gas heated
            - Control system: Siemens

            Heating duct extension by 2x 3m, 2015
            - The duct was extended by 2x 3m segments in 2016
            - The burners of the 21,000 mm system were renewed in 2015



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Production Lines Plants, complete GERLACH SHF-Kanal, Schockmodul + UHF


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210602 · Plants, complete

          GERLACH - SHF-Kanal, Schockmodul + UHF - - 2003 -

          Technical details

          Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7
            Description :
            Condition: used,

            Specification: heating channel + shock module incl. UHF and PCT
            Typ: SHF 150-120-1-147-12

            - length approx.: 12.000 mm
            - Consisting of: 9.000 mm hot air channel, incl. UHF
            3.000 mm shock module
            with folding infeed conveyor and PCT
            - UHF power: 4x 3 kW
            - Temperature range UHF part: 240°C - 340°C
            - Temperature range shock module: 240°C - 500°C
            - Shock module with non-driven metal rollers
            - Extrusion height: 1,100 mm
            - Extrusion direction: from right to left
            - At the infeed and outfeed one 50 kW burner each
            - PCT burner capacity: 70 kW
            - Heating: gas heated
            - Control: Siemens S7



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Production Lines Plants, complete GERLACH SHF-Kanal, Schockmodul + UHF


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220401 · Plants, complete

          GERLACH - SHF-Kanal, Schockmodul + UHF - - 2003 -

          Technical details
          machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 182 kW︱
          Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022.
            machine measurements Länge ca. 12.000 mm
            machine weight -- kg
            power capacity 182 kW
            Description :
            Condition: used,

            Specification: heating channel + shock module incl. UHF and PCT
            Typ: SHF 150-120-1-147-12

            - length approx.: 12.000 mm
            - Consisting of: 9.000 mm hot air channel, incl. UHF
            3.000 mm shock module
            with folding infeed conveyor and PCT
            - UHF power: 4x 3 kW
            - Temperature range UHF part: 240°C - 340°C
            - Temperature range shock module: 240°C - 500°C
            - Shock module with non-driven metal rollers
            - Extrusion height: 1,100 mm
            - Extrusion direction: from right to left
            - At the infeed and outfeed one 50 kW burner each
            - PCT burner capacity: 70 kW
            - Heating: gas heated
            - Control: Siemens S7

            Relocation date no later than mid-June 2022.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

          •   
          •   
          • 1