Plants complete
Machinelist: Plants, complete
Plants, complete
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-G220101 · Plants, complete
Berstorff - Mikrowellen/Heissluft Kanal - - 1996 -
Technical details
Condition: used - in production until approx. middle of February 2022 Specification: microwave vulcanizing line hot air channel with microwave Conversion to S7 control, 2015 - microwave vulcanizing line: MW24/HL 12x2/KK09/RA - Type: MW 24.1-200.075 - Channel length microwave approx.: 17.170 mm - Microwave feed: Number of HF generators: 4 Power per HF generator: max. 6 kW power setting: 0 / 10 - 100% Frequency of the HF generators: 2450 - 2470 MHz - channel length hot air approx.: 26.170 mm - Air heating: Number of heating zones: 3 Power per heating zone: 9,9 kW Heating zones gas heated channel air temperature max.: 250°C at the injection point - Cooling basin length approx.: 15,000 mm - belt width: 105 to 200 mm, per station - Transpot belt height approx.: 1,100 mm - number of belts: 1 - transport speed: 1 - 30 m/min - Voltage: 3 x 400 V, 50 Hz - Control voltage: 230 V, 50 Hz/ 24 V DC - Material running direction: from right to left - Conversion to Siemens S7 control was made in 2015 Documentation in German language available. plant will be available from approx. kW 7/2022. A second identical system will be available from kW 11/2022, but with the material material flow direction from left to right. In this second the control panel is defective. However, it can be repaired at Siemens.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-G210301 · Plants, complete
Berstorff Compoundieranlage - ZE 40 A - - 1993 - 2004 -
Technical details
Condition: used Specification: compounding plant with underwater pelletising system and drying system second-hand - consisting of: Pos 1, extruder system - Berstorff ZE 40 A - year of construction: 1993 - screw diameter: 43 mm - segmented screw and barrel - length: 1 screw pair each - L/D 33,5 - L/D 39,5 - Screw speed max.: 500 rpm - Screw torque: 400 Nm - DC motor with tachogenerator - Drive power: 42 kW - Rated speed: 2,500 rpm - Electrical connection: 340/460 V - Motor was completely overhauled in 2015 - Control: Siemens S7-300 was completely reprogrammed - New cylinder still available: 2 pcs. 6D-cylinder with cooling; 1 pc. 1,5D-intermediate plate - 1 side feeder (screw diameter 34 mm) - Seitenbeschickung fahrbar - various strand nozzle heads - Visualisation: WinCC Pos 2, underwater pelletising system - Make Gala Model 6 - Year of manufacture: 2001 - speed: 500 to 3.600 rpm - additional, overhauled motor Pos 3, Dryer system: - Make Econ Type: EWT 250 - year of construction: 2015 - incl. pipe system Pos 4, screen changing and starting device: - Make: Trendelkamp, Type: TASD 4L - Year of construction: 2004 - Filter inserts: 1 - Filter area: 110 cm² - Extrusion capacity approx.: 180 - 500 kg/h - Heating capacity: 4x 1.000 W - Hydraulic power: 7,5 kW - Delivery volume: 3,6 l/min - Condition of bolts: several grooves Pos 5, dosing (gravimetric) - Make: K-Tron - Year of construction: 2001 - 2 dosing units: Type: K2-ML-S60 (single screw) Type K2-ML-T35 (double screw) - hanging system - Control unit: 2x KSU (control of the feeders via extruder display possible) Pos 6, System control/visualisation
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-G210601 · Plants, complete
GERLACH - Heizkanal HLK 150-1-110-12m - - 2003 -
Technical details
Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-G220402 · Plants, complete
GERLACH - Heizkanal HLK 150-1-110-12m - - 2003 -
Technical details
Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-G210603 · Plants, complete
GERLACH - Nachheizkanal - - 1989 -
Technical details
Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Heating: gas heated - Control system: Siemens - The channel was extended by 2x 3m segments in 2016 - The burners were renewed in 2016
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-G220403 · Plants, complete
GERLACH - Nachheizkanal - - 1989/2015 -
Technical details
Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-G210602 · Plants, complete
GERLACH - SHF-Kanal, Schockmodul + UHF - - 2003 -
Technical details
Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-G220401 · Plants, complete
GERLACH - SHF-Kanal, Schockmodul + UHF - - 2003 -
Technical details
Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022.
TOP Manufacturer:
GERLACH - HAN S LASER - NELA ROVI - MEB - GERLACH MASCHINENBAU - K-W-H LANGEL FILTERSYSTEME - HANS VON DER HEYDE -