,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Injection-moulding machines (plastic)

          Machinelist: Injection-moulding machines (plastic)


          Injection-moulding machines (plastic)

          used Injection Moulding Injection-moulding machines (plastic) ENGEL VC 80H/80L / 130 Combi


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200203 · Injection-moulding machines (plastic)

          ENGEL - VC 80H/80L / 130 Combi - - 2006 -

          Technical details
          clamping force 1.300 kN︱injection volume 106 / 43 cm³︱screw diameter 30 / 25 mm︱platen size 850 x 750 mm︱daylight between platens - max. 900 mm︱
            clamping force 1.300 kN
            injection volume 106 / 43 cm³
            screw diameter 30 / 25 mm
            platen size 850 x 750 mm
            daylight between platens - max. 900 mm
            Description :




        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 1350 H 500 W/400 HL-2 F


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200202 · Injection-moulding machines (plastic)

          ENGEL - ES 1350 H 500 W/400 HL-2 F - - 2005 -

          Technical details
          clamping force 4.000 kN︱injection volume 735 cm³︱screw diameter 60 mm︱platen size 1.400 x 1.030 mm︱
          Condition: used, Specification: horizontal injection moulding machine, factory no: Injection unit 1: - screw diameter: 60 mm - metering stroke: 200 mm - Screw speed: 226 rpm - Injection flow: 351 cm³/sec - Injection volume: 735 cm³ - Spec. injection pressure: 1.489 bar - Spec. injection pressure increased: 2,011 bar Injection unit 2: - Screw diameter: 40 mm - Metering stroke: 140 mm - Screw speed: 400 rpm - Injection flow: 197 cm³/sec - Injection volume: 251 cm³ - Spec. injection pressure: 1.286 bar - Spec. injection pressure increased: 2.029 bar Clamping unit: - Clamping force max.: 4,000 kN - Clamping platens: 1,400 x 1030 mm - Opening stroke: 954 mm - Max. platen distance: 1,520 mm - Ejector stroke: 250 mm - Ejector force: 83.0 kN - Connected load: 193 kW - Operating hours: 93421 hours - Hydraulic core pull: 2 FAP 4 BAP Handling: ERC 84/1-E RC 100 integrated
            clamping force 4.000 kN
            injection volume 735 cm³
            screw diameter 60 mm
            platen size 1.400 x 1.030 mm
            Description :
            Condition: used,

            Specification: horizontal injection moulding machine,
            factory no:

            Injection unit 1:
            - screw diameter: 60 mm
            - metering stroke: 200 mm
            - Screw speed: 226 rpm
            - Injection flow: 351 cm³/sec
            - Injection volume: 735 cm³
            - Spec. injection pressure: 1.489 bar
            - Spec. injection pressure increased: 2,011 bar

            Injection unit 2:
            - Screw diameter: 40 mm
            - Metering stroke: 140 mm
            - Screw speed: 400 rpm
            - Injection flow: 197 cm³/sec
            - Injection volume: 251 cm³
            - Spec. injection pressure: 1.286 bar
            - Spec. injection pressure increased: 2.029 bar

            Clamping unit:
            - Clamping force max.: 4,000 kN
            - Clamping platens: 1,400 x 1030 mm
            - Opening stroke: 954 mm
            - Max. platen distance: 1,520 mm
            - Ejector stroke: 250 mm
            - Ejector force: 83.0 kN

            - Connected load: 193 kW
            - Operating hours: 93421 hours
            - Hydraulic core pull:
            2 FAP
            4 BAP

            Handling: ERC 84/1-E RC 100 integrated



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 750/200 W/250 HL 2F


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L191105 · Injection-moulding machines (plastic)

          ENGEL - ES 750/200 W/250 HL 2F - - 1997 -

          Technical details
          clamping force 2.500 kN︱injection volume 392 cm³︱screw diameter 50 mm︱platen size 1.150 x 905 mm︱daylight between platens - max. 1.200 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, Factory No.: 30883 Injection unit 1: - Screw diameter: 50 mm - Dosing stroke: 200 mm - Screw speed: 240 rpm - Injection flow: 291 cm³/sec - Injection volume: 392 cm³ - Injection weight: 353 g - Special injection pressure: 1,430 bar - Special injection pressure increased: 1,900 bar - Nozzle path: 650 mm - Heating capacity: 15,3 kW - Number of heating zones incl. nozzle: 5 Injection unit 2: - Screw diameter: 25 mm - Dosing stroke: 140 mm - Screw speed: 480 rpm - Injection flow: 88 cm³/sec - Injection volume: 69 cm³ - Injection weight: 61 g - Special injection pressure: 2,000 bar - Special injection pressure increased: 2,400 bar - Heating capacity: 6,6 kW - Number of heating zones incl. nozzle: 6 Clamping unit: - Clamping force max.: 2,500 kN - Mounting plates BAP: 1,150 x 905 mm HL - FAP clamping plates: 1,150 x 1,030 mm - Opening stroke: 850 mm - Distance between plates max.: 1,200 mm - Ejector travel: 200 mm - Ejector force: 83.0 kN Drive: - Pump drive power: 45 kW - Operating hours: 92680 hours Handling: ERC 63/1C integrated
            clamping force 2.500 kN
            injection volume 392 cm³
            screw diameter 50 mm
            platen size 1.150 x 905 mm
            daylight between platens - max. 1.200 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,
            Factory No.: 30883

            Injection unit 1:
            - Screw diameter: 50 mm
            - Dosing stroke: 200 mm
            - Screw speed: 240 rpm
            - Injection flow: 291 cm³/sec
            - Injection volume: 392 cm³
            - Injection weight: 353 g
            - Special injection pressure: 1,430 bar
            - Special injection pressure increased: 1,900 bar
            - Nozzle path: 650 mm
            - Heating capacity: 15,3 kW
            - Number of heating zones incl. nozzle: 5

            Injection unit 2:
            - Screw diameter: 25 mm
            - Dosing stroke: 140 mm
            - Screw speed: 480 rpm
            - Injection flow: 88 cm³/sec
            - Injection volume: 69 cm³
            - Injection weight: 61 g
            - Special injection pressure: 2,000 bar
            - Special injection pressure increased: 2,400 bar
            - Heating capacity: 6,6 kW
            - Number of heating zones incl. nozzle: 6

            Clamping unit:
            - Clamping force max.: 2,500 kN
            - Mounting plates BAP: 1,150 x 905 mm HL
            - FAP clamping plates: 1,150 x 1,030 mm
            - Opening stroke: 850 mm
            - Distance between plates max.: 1,200 mm
            - Ejector travel: 200 mm
            - Ejector force: 83.0 kN

            Drive:
            - Pump drive power: 45 kW
            - Operating hours: 92680 hours

            Handling: ERC 63/1C integrated



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 700 / 175 STND


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200401 · Injection-moulding machines (plastic)

          ENGEL - ES 700 / 175 STND - - 1992 -

          Technical details
          clamping force 1.750 kN︱injection volume 318 cm³︱screw diameter 45 mm︱platen size 700 x 700 mm︱daylight between platens - max. 460 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL
            clamping force 1.750 kN
            injection volume 318 cm³
            screw diameter 45 mm
            platen size 700 x 700 mm
            daylight between platens - max. 460 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,

            Injection unit:
            - Screw diameter: 45 mm
            - Screw length L/D: 20
            - Spray volume: 318 cm³
            - Shot weight max.: 287 g
            - Special spraying pressure: 2,100 bar

            Clamping unit:
            - Max. clamping force: 1,750 kN
            - clamping plates: 700 x 700 mm
            - Opening path max.: 460 mm
            - mould installation height: 150 mm
            - Operating hours: 89217 h

            - 1x core puller
            - Handling / Robots: ENGEL



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL insert 500H/200 ROTARY


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L210203 · Injection-moulding machines (plastic)

          ENGEL - insert 500H/200 ROTARY - - 12/2016 -

          Technical details
          clamping force 2000 kN︱injection volume 251 cm³︱screw diameter 40 mm︱platen size 1.050 x 900 mm︱daylight between platens - max. 880 mm︱
          Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Weight total: 14.500 kg - Operating hours approx.: 643 hours
            clamping force 2000 kN
            injection volume 251 cm³
            screw diameter 40 mm
            platen size 1.050 x 900 mm
            daylight between platens - max. 880 mm
            Description :
            Condition: used, very good condition

            Specification: Vertical injection moulding machine,
            with rotary table

            injection unit:
            - screw diameter: 40 mm
            - injection volume: 251 cm³
            - Injection flow: 244 cm³/sec
            - Spec. injection pressure: 1,300 bar
            - Spec. injection pressure increased: 2,020 bar
            - Nozzle stroke: 500 mm
            - Nozzle pressure: 51.9 kN

            Clamping unit:
            - Clamping force max.: 2,000 kN
            - Clamping platens hor. x vert. 820 x 459 mm
            - Max. platen distance: 880 mm
            - Opening stroke: 400 mm
            - Mould installation height: 480 mm
            - Ejector stroke: 105 mm
            Number of heating zones incl. nozzle: 4
            - Heating power: 9.3 kW
            - Weight clamping unit: 11,000 kg
            - Weight injection unit: 3.500 kg
            - Weight total: 14.500 kg
            - Operating hours approx.: 643 hours



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •