,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Cleaning unit

          Machinelist: Cleaning unit


          Cleaning unit

          used Other attachments Cleaning unit DIBO CT80 BT 70


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7233 · Cleaning unit

          DIBO - CT80 BT 70 - - 2020 -

          Technical details
          sweeping width 942 mm︱working width Bodendüse: 700 mm︱tank Reinigung: 79 l︱tank Schmutzwasser: 83 l︱weight of the machine ca. 145 kg︱dimensions of the machine ca. 1,32 x 0,7 x 1,1 m︱
          - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
            sweeping width 942 mm
            working width Bodendüse: 700 mm
            tank Reinigung: 79 l
            tank Schmutzwasser: 83 l
            weight of the machine ca. 145 kg
            dimensions of the machine ca. 1,32 x 0,7 x 1,1 m
            Description :
            - Exhibition machine and demonstration machine, like new-

            - Most compact ride-on scrubber-dryer from DiBO with 2 brushes
            - Possibility to dispense detergent: in ECO mode with constant
            Saving or automatic regulation of the machine depending on the speed of the
            machine
            Brush motors and suction: even less energy consumption, even more
            Smoothness
            - Display: large, multilingual, including hour counter, battery level
            and work programs
            - Memory card: allows the storage of battery charge cycles and
            Power consumption of the motor
            - CFS system: water distribution from the middle of the brush to avoid waste
            Avoid cleaning solution
            - SLS system: self-leveling electronic system to keep the brush
            always lies perfectly on the floor
            - EDD system: suction cup for the best results during drying and during
            Area performance was developed
            - Wheels: oil resistant
            - Extraction: 2 levels with fans and stainless steel shaft


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Vorwerk Flaechenwaescher


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-592 · Cleaning unit

          Vorwerk - Flaechenwaescher - - 2019 -

          Technical details
          total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HEIN HESO Compo 1020 WST


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-975 · Cleaning unit

          HEIN HESO - Compo 1020 WST - - 2016 -

          Technical details
          dimension 3.709 x 1.744 x 1.942 mm︱loading height 1.002 mm︱weight 1.332 kg︱tank capacity 600 l︱through-put width 307 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            dimension 3.709 x 1.744 x 1.942 mm
            loading height 1.002 mm
            weight 1.332 kg
            tank capacity 600 l
            through-put width 307 mm


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit DEBUS DES 119


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6585 · Cleaning unit

          DEBUS - DES 119 - - 2013 -

          Technical details
          6,0 m3/min︱rated current 9 A︱total power requirement 2,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          swarf cleaner
            6,0 m3/min
            rated current 9 A
            total power requirement 2,5 kW
            Description :
            swarf cleaner


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HAKO HAKOMAT B70 CLHM


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S592 · Cleaning unit

          HAKO - HAKOMAT B70 CLHM - - 2013 -

          Technical details
          total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit TENNANT Tennant 7100


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6754 · Cleaning unit

          TENNANT - Tennant 7100 - - 2009 (2021) -

          Technical details
          sweeping width 800 inkl.Seitenb.︱container volume 114 l︱total power requirement 3,0 kW︱ 2759 m²/h︱ max. 5232 m²/h︱
          Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!
            sweeping width 800 inkl.Seitenb.
            container volume 114 l
            total power requirement 3,0 kW
            2759 m²/h
            max. 5232 m²/h
            Description :
            Sweeper - scrubber dryer
            Operating hours: approx. 400 hours
            incl. 4x brush + charger

            including new battery pack (consisting of 6x gel battery) !!


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit JETO EUROCLEAN


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4963 · Cleaning unit

          JETO - EUROCLEAN - - 2000 -

          Technical details
          temperature 80/130 °C︱0 100 kg︱filling capacity 750 l︱basket dimensions 670x480 mm︱number 25 ︱total power requirement 43 kW︱weight of the machine ca. 890 kg︱dimensions of the machine ca. 185x190x150 cm︱
            temperature 80/130 °C
            0 100 kg
            filling capacity 750 l
            basket dimensions 670x480 mm
            number 25
            total power requirement 43 kW
            weight of the machine ca. 890 kg
            dimensions of the machine ca. 185x190x150 cm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Kohlhoff Hygienetechnik Sailer SSR-1


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-LS7007 · Cleaning unit

          Kohlhoff Hygienetechnik Sailer - SSR-1 - - 09/2014 -

          Technical details
          0 20 l/min︱total power requirement 4 kW︱weight of the machine ca. t︱required space m︱
          APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.
            0 20 l/min
            total power requirement 4 kW
            Description :
            APRON CLEANER
            APRON CLEANER

            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.
            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 5.800 €
          Datasheet
          Request / Contact

          Sandblasting Machine

          used Other attachments Sandblasting Machine UNICRAFT SSK 3.1


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2500018 · Sandblasting Machine

          UNICRAFT - SSK 3.1 - - NEU -

          Technical details
          through-put width 580 mm︱working heigth 580 mm︱air consumption 400 - 800 l/min︱working pressure 3,4 - 8,0 bar︱suction capacity 17,4 m³/h︱total power requirement 1,2 kW︱weight of the machine ca. 115 kg︱dimensions of the machine ca. 1225 x 935 x 1640 mm︱
          - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collecting container - With compressed air connection on the outside - Glass bead abrasives, corundum abrasives, silicon carbide, plastic Blasting media, etc. can be used Equipment details: - Very large, upward-opening front flap with gas pressure springs for quick access and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without finger trigger - Air flow is controlled via Foot pedal - Four fluorescent tubes (230 volts), in a separate housing with protective screen and exchangeable protective film, including five replacement films - 2 separate switches for suction and cabin lighting - Regulation of the working pressure via pressure regulator with manometer - Cross struts on the feet allow easy transport with the pallet truck
            through-put width 580 mm
            working heigth 580 mm
            air consumption 400 - 800 l/min
            working pressure 3,4 - 8,0 bar
            suction capacity 17,4 m³/h
            total power requirement 1,2 kW
            weight of the machine ca. 115 kg
            dimensions of the machine ca. 1225 x 935 x 1640 mm
            Description :
            - Suitable for various blasting materials, e.g. quartz, glass ball,
            Plastic ball, etc.
            - Ideal for cleaning, derusting or removing paint from all metal parts
            Type, e.g. engine parts, fittings, signs, housings, rims, hinges
            - High-quality latex work gloves are firmly attached to the housing
            - Optimal visibility and occupational safety when machining workpieces because
            of the
            Window with glued protective film
            - Dust-free work due to all-round seals on the cover and door frames
            - Stable storage grid enables workpieces to be placed in the cabin interior
            - With drain opening for changing the blasting material
            - Suction pipe for the blasting material attached to the bottom of the
            collecting container
            - With compressed air connection on the outside
            - Glass bead abrasives, corundum abrasives, silicon carbide, plastic
            Blasting media, etc. can be used

            Equipment details:
            - Very large, upward-opening front flap with gas pressure springs for quick
            access
            and easy loading and unloading
            - Integrated suction system with exchangeable air filter
            - Jet gun without finger trigger - Air flow is controlled via
            Foot pedal
            - Four fluorescent tubes (230 volts), in a separate housing with protective
            screen and
            exchangeable protective film, including five replacement films
            - 2 separate switches for suction and cabin lighting
            - Regulation of the working pressure via pressure regulator with manometer
            - Cross struts on the feet allow easy transport with the pallet truck


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine ZIONAIR SB42AB


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06541 · Sandblasting Machine

          ZIONAIR - SB42AB - - 2021 -

          Technical details
          pressure / power 5,5 - 8,5 bar ︱dimensions 170 x 135 x 90 m︱Contents 420 L︱serial number VP2021090022 ︱weight of the machine ca. 150 Kg︱
            pressure / power 5,5 - 8,5 bar
            dimensions 170 x 135 x 90 m
            Contents 420 L
            serial number VP2021090022
            weight of the machine ca. 150 Kg


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine D.U.P. CSM50TS


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M950 · Sandblasting Machine

          D.U.P. - CSM50TS - - 2003 -

          Technical details
          Door width max. 650/400 x 650 mm︱dimensions of machine 1.500 x 1.300 x 2.050 mm︱machine weight ab. 450 kg︱
          Brand D.u.p Machine no M950 Type CSM50TS Year of make 2003 Doorway 650/400 x 650 mm Machine dimensions (L×W×H) 1.500 x 1.300 x 2.050 mm Machine weight 450 kg
            Door width max. 650/400 x 650 mm
            dimensions of machine 1.500 x 1.300 x 2.050 mm
            machine weight ab. 450 kg
            Description :
            Brand D.u.p
            Machine no M950
            Type CSM50TS
            Year of make 2003
            Doorway 650/400 x 650 mm
            Machine dimensions (L×W×H) 1.500 x 1.300 x 2.050 mm
            Machine weight 450 kg



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine Guyson GL8


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M722 · Sandblasting Machine

          Guyson - GL8 - - 2001 -

          Technical details
          CNC-Marke - ︱CNC-Modell - ︱Tisch länge - mm︱
          Internal dimensions: 1050 x 750 x 1250 mm including 'DC70' extraction unit
            CNC-Marke -
            CNC-Modell -
            Tisch länge - mm
            Description :
            Internal dimensions: 1050 x 750 x 1250 mm
            including 'DC70' extraction unit


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine ABS ABS 100/70/70 N-W


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M723 · Sandblasting Machine

          ABS - ABS 100/70/70 N-W - - 2001 -

          Technical details
          CNC-Marke - ︱CNC-Modell - ︱Tisch länge - mm︱
          Internal dimensions: 1000 x 700 x 700 mm Including half a bag of grinding sand
            CNC-Marke -
            CNC-Modell -
            Tisch länge - mm
            Description :
            Internal dimensions: 1000 x 700 x 700 mm
            Including half a bag of grinding sand


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine KLEIN DS 1250


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20436 · Sandblasting Machine

          KLEIN - DS 1250 - - 1997 -

          Technical details
          through-put width 1200 mm︱working heigth 1200 mm︱depth of chamber 1200 mm︱operating pressure 6,0 bar︱voltage 380 V︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 1,40 x 1,70 x 2,70 m︱
          - Serial-no.: 340997-466 - Pressure blasting cabin - Retractable rotary table - Foot switch - Suction unit - Stairs
            through-put width 1200 mm
            working heigth 1200 mm
            depth of chamber 1200 mm
            operating pressure 6,0 bar
            voltage 380 V
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 1,40 x 1,70 x 2,70 m
            Description :
            - Serial-no.: 340997-466
            - Pressure blasting cabin
            - Retractable rotary table
            - Foot switch
            - Suction unit
            - Stairs


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine BERNARDO SB 4


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8809010 · Sandblasting Machine

          BERNARDO - SB 4 - - -

          Technical details
          through-put width 820 mm︱working heigth 810 mm︱Air consumption 680 l/min.︱air pressure 8,6 bar︱ 148 Liter︱0 Arm Loch 180 mm︱air clutch 3/8" Zoll︱weight 160 kg︱range L-W-H ca. 1350 x 1300 x 1800 mm︱
          Furnishing: - Working space: 1110 x 820 x 810 mm (LxWxH) - very stable construction - including sandblasting gun (usable grain size 0.149 - 0.250 mm) - including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Transport dimensions / packed: 1350 x 1000 x 1100 mm - Instruction manual in German
            through-put width 820 mm
            working heigth 810 mm
            Air consumption 680 l/min.
            air pressure 8,6 bar
            148 Liter
            0 Arm Loch 180 mm
            air clutch 3/8" Zoll
            weight 160 kg
            range L-W-H ca. 1350 x 1300 x 1800 mm
            Description :
            Furnishing:
            - Working space: 1110 x 820 x 810 mm (LxWxH)
            - very stable construction
            - including sandblasting gun (usable grain size 0.149 - 0.250 mm)
            - including container for blasting material
            - including dust extraction
            - freely movable foot switch
            - Lighting in the work area
            - Transport dimensions / packed: 1350 x 1000 x 1100 mm
            - Instruction manual in German


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine UNICRAFT SSK 3.1


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8809015 · Sandblasting Machine

          UNICRAFT - SSK 3.1 - - -

          Technical details
          dimensions: innen 1160 x 580 x 580 mm︱Air consumption 400 - 800 l/min.︱air pressure 3,4 - 8,0 bar︱workpiece weight max. 120 kg︱total power requirement 1,2 kW︱weight 115 kg︱range L-W-H 1225 x 935 x 1640 mm︱
          Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows
            dimensions: innen 1160 x 580 x 580 mm
            Air consumption 400 - 800 l/min.
            air pressure 3,4 - 8,0 bar
            workpiece weight max. 120 kg
            total power requirement 1,2 kW
            weight 115 kg
            range L-W-H 1225 x 935 x 1640 mm
            Description :
            Furnishing:
            - Very large front flap that opens upwards
            - Suitable for various blasting materials
            * e.g. quartz, glass ball, plastic ball, etc.
            - With gas pressure springs for quick and easy loading and unloading
            - Integrated suction system with exchangeable air filter
            - Jet gun without a finger trigger
            * The air flow is controlled by a foot pedal
            - Two fluorescent tubes (230 volts)
            * in a separate housing with protective screen and exchangeable protective film
            - Light switch with double function: suction and cabin lighting
            * are switched on and off at the same time
            * Regulation of the working pressure via pressure regulator with manometer
            - Jet head (grain size 0.125 - 0.42 mm can be used)
            - Container for blasting material
            - dust extraction
            - foot switch
            - Operating instructions in German

            Scope of delivery :
            - High quality jet gun with ceramic nozzle
            - 4 ceramic nozzles (6/6/7/7 mm)
            - 5 replacement foils for viewing windows


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine BERNARDO SB 3


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8809009 · Sandblasting Machine

          BERNARDO - SB 3 - - -

          Technical details
          through-put width 580 mm︱working heigth 615 mm︱discs 570 x 260 mm︱Air consumption 400 l/min.︱air pressure 2,7 - 5,5 bar︱0 184 Liter︱0 Luft .. 3/8 Zoll︱weight 125 kg︱range L-W-H ca. 1350 x 1300 x 1800 mm︱
          Furnishing: - Working space: 1220 x 615 x 580 mm (LxWxH) - including sandblasting gun (grain size 0.149 - 0.250 mm can be used) - Including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Instruction manual in German
            through-put width 580 mm
            working heigth 615 mm
            discs 570 x 260 mm
            Air consumption 400 l/min.
            air pressure 2,7 - 5,5 bar
            0 184 Liter
            0 Luft .. 3/8 Zoll
            weight 125 kg
            range L-W-H ca. 1350 x 1300 x 1800 mm
            Description :
            Furnishing:
            - Working space: 1220 x 615 x 580 mm (LxWxH)
            - including sandblasting gun (grain size 0.149 - 0.250 mm can be used)
            - Including container for blasting material
            - including dust extraction
            - freely movable foot switch
            - Lighting in the work area
            - Instruction manual in German


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine JOISTEN & KETTENBAUM mikromat 1200 S


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9803037 · Sandblasting Machine

          JOISTEN & KETTENBAUM - mikromat 1200 S - - -

          Technical details
          through-put width 750 mm︱working heigth 750 mm︱working area L-W-H 1200 x 750 x 750 mm︱compressed air 0 - 10 bar︱Air consumption min. 250 l/min.︱work height max. 850 mm︱weight of the machine ca. 800 kg︱dimensions of the machine ca. 1400 x 1200 x 1870 mm︱
          Furnishing: - Industrial sandblasting system - Working space: 1,200 x 750 x 750 mm LxWxH - Perforated metal work grid with stable support - 2x side passage openings with closure sliders * Dimensions: 340 x 240 mm - 1x sectional door that opens upwards, revealing the entire blasting space - continuous jet pressure adjustment - Pressure gauge - pressure display - Front window / plexiglass - freely movable foot switch - Drain/collection container for blasting material - Blasting gun + blasting gloves * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9803037
            through-put width 750 mm
            working heigth 750 mm
            working area L-W-H 1200 x 750 x 750 mm
            compressed air 0 - 10 bar
            Air consumption min. 250 l/min.
            work height max. 850 mm
            weight of the machine ca. 800 kg
            dimensions of the machine ca. 1400 x 1200 x 1870 mm
            Description :
            Furnishing:
            - Industrial sandblasting system
            - Working space: 1,200 x 750 x 750 mm LxWxH
            - Perforated metal work grid with stable support
            - 2x side passage openings with closure sliders
            * Dimensions: 340 x 240 mm
            - 1x sectional door that opens upwards, revealing the entire blasting space
            - continuous jet pressure adjustment
            - Pressure gauge - pressure display
            - Front window / plexiglass
            - freely movable foot switch
            - Drain/collection container for blasting material
            - Blasting gun + blasting gloves

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9803037


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine UNICRAFT SSK 4


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8809016 · Sandblasting Machine

          UNICRAFT - SSK 4 - - -

          Technical details
          dimensions: innen 1160 x 870 x 850 mm︱Air consumption 400 - 800 l/min.︱air pressure 3,4 - 8,0 bar︱workpiece weight max. 150 kg︱total power requirement 1,2 kW︱weight 160 kg︱range L-W-H 1320 x 1200 x 1760 mm︱
          Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet * easy transport with the pallet truck - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows
            dimensions: innen 1160 x 870 x 850 mm
            Air consumption 400 - 800 l/min.
            air pressure 3,4 - 8,0 bar
            workpiece weight max. 150 kg
            total power requirement 1,2 kW
            weight 160 kg
            range L-W-H 1320 x 1200 x 1760 mm
            Description :
            Furnishing:
            - Very large front flap that opens upwards
            - Suitable for various blasting materials
            * e.g. quartz, glass ball, plastic ball, etc.
            - Integrated suction system with exchangeable air filter
            - Jet gun without a finger trigger
            * The air flow is controlled by a foot pedal
            - Four fluorescent tubes (230 volts)
            * in a separate housing with protective screen and exchangeable protective film
            - Switch for suction and cabin lighting
            * Regulation of the working pressure via pressure regulator with manometer
            - Jet head (grain size 0.125 - 0.42 mm can be used)
            - Cross struts on the feet
            * easy transport with the pallet truck
            - Container for blasting material
            - dust extraction
            - foot switch
            - Operating instructions in German

            Scope of delivery :
            - High quality jet gun with ceramic nozzle
            - 4 ceramic nozzles (6/6/7/7 mm)
            - 5 replacement foils for viewing windows


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Sandblasting Machine Sybrandy S61


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-007 · Sandblasting Machine

          Sybrandy - S61 - - -

          Technical details
          Working Area 750 x 980 x 980 mm︱Door opening 640 x 740 mm︱total power requirement kW︱weight of the machine ca. 0,4 t︱required space 1,0 x 1,0 x 2,0 m︱
            Working Area 750 x 980 x 980 mm
            Door opening 640 x 740 mm
            weight of the machine ca. 0,4 t
            required space 1,0 x 1,0 x 2,0 m


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •