,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Toolcupboard

          Machinelist: Toolcupboard


          Cleaning unit

          used Other attachments Cleaning unit DIBO CT80 BT 70


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7233 · Cleaning unit

          DIBO - CT80 BT 70 - - 2020 -

          Technical details
          sweeping width 942 mm︱working width Bodendüse: 700 mm︱tank Reinigung: 79 l︱tank Schmutzwasser: 83 l︱weight of the machine ca. 145 kg︱dimensions of the machine ca. 1,32 x 0,7 x 1,1 m︱
          - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
            sweeping width 942 mm
            working width Bodendüse: 700 mm
            tank Reinigung: 79 l
            tank Schmutzwasser: 83 l
            weight of the machine ca. 145 kg
            dimensions of the machine ca. 1,32 x 0,7 x 1,1 m
            Description :
            - Exhibition machine and demonstration machine, like new-

            - Most compact ride-on scrubber-dryer from DiBO with 2 brushes
            - Possibility to dispense detergent: in ECO mode with constant
            Saving or automatic regulation of the machine depending on the speed of the
            machine
            Brush motors and suction: even less energy consumption, even more
            Smoothness
            - Display: large, multilingual, including hour counter, battery level
            and work programs
            - Memory card: allows the storage of battery charge cycles and
            Power consumption of the motor
            - CFS system: water distribution from the middle of the brush to avoid waste
            Avoid cleaning solution
            - SLS system: self-leveling electronic system to keep the brush
            always lies perfectly on the floor
            - EDD system: suction cup for the best results during drying and during
            Area performance was developed
            - Wheels: oil resistant
            - Extraction: 2 levels with fans and stainless steel shaft


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Vorwerk Flaechenwaescher


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-592 · Cleaning unit

          Vorwerk - Flaechenwaescher - - 2019 -

          Technical details
          total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HEIN HESO Compo 1020 WST


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-975 · Cleaning unit

          HEIN HESO - Compo 1020 WST - - 2016 -

          Technical details
          dimension 3.709 x 1.744 x 1.942 mm︱loading height 1.002 mm︱weight 1.332 kg︱tank capacity 600 l︱through-put width 307 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            dimension 3.709 x 1.744 x 1.942 mm
            loading height 1.002 mm
            weight 1.332 kg
            tank capacity 600 l
            through-put width 307 mm


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit DEBUS DES 119


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6585 · Cleaning unit

          DEBUS - DES 119 - - 2013 -

          Technical details
          6,0 m3/min︱rated current 9 A︱total power requirement 2,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          swarf cleaner
            6,0 m3/min
            rated current 9 A
            total power requirement 2,5 kW
            Description :
            swarf cleaner


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HAKO HAKOMAT B70 CLHM


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S592 · Cleaning unit

          HAKO - HAKOMAT B70 CLHM - - 2013 -

          Technical details
          total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit TENNANT Tennant 7100


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6754 · Cleaning unit

          TENNANT - Tennant 7100 - - 2009 (2021) -

          Technical details
          sweeping width 800 inkl.Seitenb.︱container volume 114 l︱total power requirement 3,0 kW︱ 2759 m²/h︱ max. 5232 m²/h︱
          Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!
            sweeping width 800 inkl.Seitenb.
            container volume 114 l
            total power requirement 3,0 kW
            2759 m²/h
            max. 5232 m²/h
            Description :
            Sweeper - scrubber dryer
            Operating hours: approx. 400 hours
            incl. 4x brush + charger

            including new battery pack (consisting of 6x gel battery) !!


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit JETO EUROCLEAN


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4963 · Cleaning unit

          JETO - EUROCLEAN - - 2000 -

          Technical details
          temperature 80/130 °C︱0 100 kg︱filling capacity 750 l︱basket dimensions 670x480 mm︱number 25 ︱total power requirement 43 kW︱weight of the machine ca. 890 kg︱dimensions of the machine ca. 185x190x150 cm︱
            temperature 80/130 °C
            0 100 kg
            filling capacity 750 l
            basket dimensions 670x480 mm
            number 25
            total power requirement 43 kW
            weight of the machine ca. 890 kg
            dimensions of the machine ca. 185x190x150 cm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Kohlhoff Hygienetechnik Sailer SSR-1


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-LS7007 · Cleaning unit

          Kohlhoff Hygienetechnik Sailer - SSR-1 - - 09/2014 -

          Technical details
          0 20 l/min︱total power requirement 4 kW︱weight of the machine ca. t︱required space m︱
          APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.
            0 20 l/min
            total power requirement 4 kW
            Description :
            APRON CLEANER
            APRON CLEANER

            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.
            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 5.800 €
          Datasheet
          Request / Contact

          Toolcupboard

          used Other attachments Toolcupboard RAU Computer-Station 2075


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23236 · Toolcupboard

          RAU - Computer-Station 2075 - - unbekannt -

          Technical details
          length 650 mm︱width 720 mm︱height 1850 mm︱weight 255 kg︱
            length 650 mm
            width 720 mm
            height 1850 mm
            weight 255 kg


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard WERKZEUGSCHRANK Diverse


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23103 · Toolcupboard

          WERKZEUGSCHRANK - Diverse - - unbekannt -

          Technical details
          length 800 mm︱width 600 mm︱height 1150 mm︱weight 140 kg︱
            length 800 mm
            width 600 mm
            height 1150 mm
            weight 140 kg


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard LISTA WERKZEUGSCHRANK


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24059 · Toolcupboard

          LISTA - WERKZEUGSCHRANK - - unbekannt -

          Technical details
          length 750 mm︱width 560 mm︱height 1140 mm︱weight 95 kg︱
            length 750 mm
            width 560 mm
            height 1140 mm
            weight 95 kg


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard WERKZEUGSCHRANK WERKZEUGSCHRANK


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24022 · Toolcupboard

          WERKZEUGSCHRANK - WERKZEUGSCHRANK - - unbekannt -

          Technical details
          length 720 mm︱width 580 mm︱height 850 mm︱weight 50 kg︱
            length 720 mm
            width 580 mm
            height 850 mm
            weight 50 kg


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard WERKZEUGSCHRANK Unbekannt


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24060 · Toolcupboard

          WERKZEUGSCHRANK - Unbekannt - - unbekannt -

          Technical details
          length 545 mm︱width 460 mm︱height 920 mm︱weight 30 kg︱
          Tool cabinet including contents as per pictures
            length 545 mm
            width 460 mm
            height 920 mm
            weight 30 kg
            Description :
            Tool cabinet including contents as per pictures


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard WERKZEUGSCHRANK Unbekannt


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24001 · Toolcupboard

          WERKZEUGSCHRANK - Unbekannt - - unbekannt -

          Technical details
          length 750 mm︱width 750 mm︱height 1000 mm︱weight 90 kg︱
          Tool cabinet including contents as per pictures
            length 750 mm
            width 750 mm
            height 1000 mm
            weight 90 kg
            Description :
            Tool cabinet including contents as per pictures


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard UNBEKANNT + 30 Werkzeuge + Zubehör


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-C1217 · Toolcupboard

          UNBEKANNT - + 30 Werkzeuge + Zubehör - - unbekannt -

          Technical details
          length 975 mm︱width 530 mm︱height 1830 mm︱
            length 975 mm
            width 530 mm
            height 1830 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard UNBEKANNT


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4307 · Toolcupboard

          UNBEKANNT - - - unbekannt -

          Technical details
          length ? mm︱width ? mm︱height ? mm︱
            length ? mm
            width ? mm
            height ? mm


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard Abkantwerkzeugschrank UKB 40.643


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300002 · Toolcupboard

          Abkantwerkzeugschrank - UKB 40.643 - - NEU -

          Technical details
          length 660 mm︱width 1240 mm︱height 1350 mm︱
            length 660 mm
            width 1240 mm
            height 1350 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard VIDMAR 760x700x1500


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-er3859 · Toolcupboard

          VIDMAR - 760x700x1500 - - Gepflegt -

          Technical details
          length 760 mm︱width 700 mm︱height 1500 mm︱
          Several executions PICTURES AND MORE INFORMATION ON www.marcels-maschinen.ch
            length 760 mm
            width 700 mm
            height 1500 mm
            Description :
            Several executions

            PICTURES AND MORE INFORMATION ON www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00477 · Toolcupboard

          - - - -

          Technical details
          length 800 mm︱width 800 mm︱height 1200 mm︱
            length 800 mm
            width 800 mm
            height 1200 mm


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00467 · Toolcupboard

          - - - -

          Technical details
          length 600 mm︱width 800 mm︱height 800 mm︱weight 150 kg︱
            length 600 mm
            width 800 mm
            height 800 mm
            weight 150 kg


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard LISTA


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-k758 · Toolcupboard

          LISTA - - - -

          Technical details
          length 715 mm︱width 755 mm︱height 1125 mm︱
            length 715 mm
            width 755 mm
            height 1125 mm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Other attachments Toolcupboard SCHÄFER FS 2510 / 2160


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06592 · Toolcupboard

          SCHÄFER - FS 2510 / 2160 - - -

          Technical details
          length 1100 mm︱width 550 mm︱height 2000 mm︱ ja ︱weight 100 kg︱
            length 1100 mm
            width 550 mm
            height 2000 mm
            ja
            weight 100 kg


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •