,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Kemmerich Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Bevel Gear Generator - Straight

          used  Bevel Gear Generator - Straight MODUL ZFTK 500/2


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19248 · Bevel Gear Generator - Straight

          MODUL - ZFTK 500/2 - - 1988 -

          Technical details
          max. wheel diameter 620 mm︱gear width 90 mm︱max. module 12 ︱min. module - ︱no. of teeth 6 - 100 ︱pivoting angle 0 - 90 Grad︱spindle taper metr. 100 ︱milling head speed 28 - 56 U/min︱connected load 18 kVA︱total power requirement 14 kW︱weight of the machine ca. 12 t︱
          change gears coolant Chip Conveyor
            max. wheel diameter 620 mm
            gear width 90 mm
            max. module 12
            min. module -
            no. of teeth 6 - 100
            pivoting angle 0 - 90 Grad
            spindle taper metr. 100
            milling head speed 28 - 56 U/min
            connected load 18 kVA
            total power requirement 14 kW
            weight of the machine ca. 12 t
            Description :
            change gears
            coolant
            Chip Conveyor
          Datasheet
          Request / Contact
          used  Bevel Gear Generator - Straight KLINGELNBERG BF 204


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-07681 · Bevel Gear Generator - Straight

          KLINGELNBERG - BF 204 - - 1980 -

          Technical details
          max. wheel diameter 180 mm︱gear width 60 mm︱max. module 8 / 10 ︱min. module 1,5 ︱tooth length max. 16 mm︱no. of teeth Segment 6 ︱no. of teeth Vollrundung 6-30 ︱pivoting angle 0 - 10 °︱inserted tooth milling cutter dia. 600 mm︱cutting speed Frässpindel 48-78 m/min︱root circle dia. min. 50 mm︱electrics - voltage/frequency 380 / 50 V/Hz︱total power requirement 16 kW︱weight of the machine ca. 7,6 t︱
          Segmental Gear Generating Machine - specifically for rational production of tapered or cylindrical segmental gears, such as steering sector shafts. This model also operates to the generating-indexing method and permits tooth thickness modifications on the centre Tooth. with chip conveyor and handbooks ex works South Americ
            max. wheel diameter 180 mm
            gear width 60 mm
            max. module 8 / 10
            min. module 1,5
            tooth length max. 16 mm
            no. of teeth Segment 6
            no. of teeth Vollrundung 6-30
            pivoting angle 0 - 10 °
            inserted tooth milling cutter di. 600 mm
            cutting speed Frässpindel 48-78 m/min
            root circle dia. min. 50 mm
            electrics - voltage/frequency 380 / 50 V/Hz
            total power requirement 16 kW
            weight of the machine ca. 7,6 t
            Description :
            Segmental Gear Generating Machine - specifically for rational production of
            tapered or cylindrical segmental gears, such as steering sector shafts.
            This model also operates to the generating-indexing method and permits tooth
            thickness modifications on the centre Tooth.

            with chip conveyor and handbooks
            ex works South Americ
          Datasheet
          Request / Contact

          Cold Rolling Machine

          used  Cold Rolling Machine KOVOSIT MAS Roller 2800 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20120 · Cold Rolling Machine

          KOVOSIT MAS - Roller 2800 CNC - - 2018 - Siemens 840 D

          Technical details
          swing diameter 300 (280) mm︱workpiece diameter . mm︱workpiece length 2876 mm︱drive motor 11 kW︱spindle speeds 0 - 400 U/min︱Control Siemens 840 D ︱Distance between centres 2876 mm︱workpiece weight max. 1000 kg︱spindle bore 106 mm︱spindle taper 112 mm︱b-axis +/- 35 °︱z-axis 2876 mm︱tail stock ︱tailstock quill diameter 115 mm︱tailstock quill adjustment 160 mm︱tailstock taper MT 6 ︱total power requirement kW︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. m︱
          Cold Rolling Machine The function of the machine lies in the technology of cold forming - rolling of cylindrical, conical and transition radius surfaces of shaft components, e.g. vehicle axles. Among other things, this function predetermines the area of ??application of the machine for specialized production of parts using surface strengthening technology, always perpendicular to the surface of the rolling tool to the material surface by means of the B-axis tilting mechanism controlled by the CNC system. he locking of the rolling heads in a given position is ensured by a drive with self-locking worm gearboxes. The rolling equipment is located on a longitudinal support. The slide moves along the machine bed in the longitudinal direction by means of a CNC- controlled Z axis. The movement in the X-axis is realized hydraulically by two quill of rolling heads placed against each other, into which the rolling tools themselves are clamped. Continuous pressure changes on the rolling tools can be changed in the program during the work cycle. The system enables indirect independent measurement of rolling force, recording and archiving of rolling process data. equipted with : - CNC control Siemens Sinumerik model 840D - Tailstock - Hydraulic Unit - Lubrication Range of multi-roller power: 1-50kN - Max. power of multi-roller with using of tilting B-axes (B = ± 35°: 20kN - Max. power of multi-roller without using of tilting B-axes (B = 0°): 50kN Axis B: - Ratio of worm-gear unit: 1:40 - Ratio of spur gearing of tilting mechanism: 1:12
            swing diameter 300 (280) mm
            workpiece diameter . mm
            workpiece length 2876 mm
            drive motor 11 kW
            spindle speeds 0 - 400 U/min
            Control Siemens 840 D
            Distance between centres 2876 mm
            workpiece weight max. 1000 kg
            spindle bore 106 mm
            spindle taper 112 mm
            b-axis +/- 35 °
            z-axis 2876 mm
            tailstock quill diameter 115 mm
            tailstock quill adjustment 160 mm
            tailstock taper MT 6
            weight of the machine ca. 6,2 t
            Description :
            Cold Rolling Machine
            The function of the machine lies in the technology of cold forming - rolling of
            cylindrical, conical and transition radius surfaces of shaft components, e.g.
            vehicle axles. Among other things, this function predetermines the area of
            ??application of the machine for specialized production of parts using surface
            strengthening technology, always perpendicular to the surface of the rolling
            tool to the material surface by means of the B-axis tilting mechanism
            controlled by the CNC system. he locking of the rolling heads in a given
            position is ensured by a drive with self-locking worm gearboxes.
            The rolling equipment is located on a longitudinal support. The slide moves
            along the machine bed in the longitudinal direction by means of a CNC-
            controlled Z axis. The movement in the X-axis is realized hydraulically by two
            quill of rolling heads placed against each other, into which the rolling tools
            themselves are clamped. Continuous pressure changes on the rolling tools can be
            changed in the program during the work cycle. The system enables indirect
            independent measurement of rolling force, recording and archiving of rolling
            process data.

            equipted with :
            - CNC control Siemens Sinumerik model 840D
            - Tailstock
            - Hydraulic Unit
            - Lubrication
            Range of multi-roller power: 1-50kN
            - Max. power of multi-roller with using of tilting B-axes (B = ± 35°: 20kN
            - Max. power of multi-roller without using of tilting B-axes (B = 0°): 50kN
            Axis B:
            - Ratio of worm-gear unit: 1:40
            - Ratio of spur gearing of tilting mechanism: 1:12
          Datasheet
          Request / Contact

          Gear Grinding Machine

          used  Gear Grinding Machine STANEXIM SMG 405 GF3


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16587 · Gear Grinding Machine

          STANEXIM - SMG 405 GF3 - - neu/new -

          Technical details
          max. wheel diameter 400 mm︱gear width 200 mm︱max. module 10 ︱min. module 1 ︱profile depth 25 mm︱x-axis 630 mm︱y-axis 400 mm︱z-axis 190 mm︱U-axis 80 mm︱a- axis 360 °︱b-axis +/- 30 °︱max.helical angle 30 °︱grinding wheel diameter 250 - 350 mm︱spindle speeds (infinitely variable) 1500 - 2800 U/min︱grinding slide feeds 6000 mm/min︱center distance betw. workpiece-tool min/max. ︱pitch max. 9000 mm︱pitch min. 10 mm︱electrics - voltage/frequency 380 / 50 V/Hz︱total power requirement 38 kW︱
          horizontal Profil Gear Grinding Machine for Spur and Helical External Gears. Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor Wheels. Equipped with: - CNC Control FANUC 0i-MF -- for 6 Controlled Axis (4 simultaneously) - Gear Measuring System - Chip and Sludge Removal System - Paper Band Filter and magnetic Seperator - Swivel Reducer - Dressing Device - Tailstock with pneumatic clamping - Accurcy according to GOST 1643-81: 5 / DIN 5-6 SIEMENS control can be offered as an option
            max. wheel diameter 400 mm
            gear width 200 mm
            max. module 10
            min. module 1
            profile depth 25 mm
            x-axis 630 mm
            y-axis 400 mm
            z-axis 190 mm
            U-axis 80 mm
            a- axis 360 °
            b-axis +/- 30 °
            max.helical angle 30 °
            grinding wheel diameter 250 - 350 mm
            spindle speeds (infinitely varia. 1500 - 2800 U/min
            grinding slide feeds 6000 mm/min
            pitch max. 9000 mm
            pitch min. 10 mm
            electrics - voltage/frequency 380 / 50 V/Hz
            total power requirement 38 kW
            Description :
            horizontal Profil Gear Grinding Machine for Spur and Helical External Gears.
            Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor
            Wheels. Equipped with:
            - CNC Control FANUC 0i-MF
            -- for 6 Controlled Axis (4 simultaneously)
            - Gear Measuring System
            - Chip and Sludge Removal System
            - Paper Band Filter and magnetic Seperator
            - Swivel Reducer
            - Dressing Device
            - Tailstock with pneumatic clamping
            - Accurcy according to GOST 1643-81: 5 / DIN 5-6

            SIEMENS control can be offered as an option
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used  Gear Hobbing Machine - Vertical KOHCHIYAMA TECH SH-55


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20171 · Gear Hobbing Machine - Vertical

          KOHCHIYAMA TECH - SH-55 - - 2014 - FANUC 31i MODEL B

          Technical details
          max. wheel diameter 5500 mm︱gear width 1500 mm︱max. module 32 ︱faceplate diameter 3740 mm︱swing diameter 6200 mm︱turning height 1200 mm︱control FANUC 31i MODEL B1250 mm︱cross rail - adjustment 3000 mm︱turning speeds 3-15 U/min︱spindle turning speed - stepless 15 - 1500 U/min︱workpiece weight 39,4 t︱max. dia. of teeth cutting 5500 mm︱tooth width 550 mm︱module 32 ︱cutter speeds 10 -150 U/min︱milling cutter dia. x width 450 x 110 mm︱milling head axial adjustable 2060 mm︱total power requirement - kW︱weight of the machine ca. - t︱
          Complex TurnMill & Gear Cutting Machine - CNC control FANUC 31i B - Turning and Milling Function - ATC - Angular Milling Head - Gear Hobbing (internal and external) - Chip Conveyor
            max. wheel diameter 5500 mm
            gear width 1500 mm
            max. module 32
            faceplate diameter 3740 mm
            swing diameter 6200 mm
            turning height 1200 mm
            control FANUC 31i MODEL B
            1250 mm
            cross rail - adjustment 3000 mm
            turning speeds 3-15 U/min
            spindle turning speed - stepless 15 - 1500 U/min
            workpiece weight 39,4 t
            max. dia. of teeth cutting 5500 mm
            tooth width 550 mm
            module 32
            cutter speeds 10 -150 U/min
            milling cutter dia. x width 450 x 110 mm
            milling head axial adjustable 2060 mm
            total power requirement - kW
            weight of the machine ca. - t
            Description :
            Complex TurnMill & Gear Cutting Machine

            - CNC control FANUC 31i B
            - Turning and Milling Function
            - ATC
            - Angular Milling Head
            - Gear Hobbing (internal and external)
            - Chip Conveyor
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical LIEBHERR LC 3000 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20040 · Gear Hobbing Machine - Vertical

          LIEBHERR - LC 3000 CNC - - 2009 - Siemens 840D

          Technical details
          max. wheel diameter 3000 mm︱gear width 500 mm︱max. module 25 / 40 ︱spindle turning speed range 250 U/min︱feed speeds max. 4000 mm/min︱faceplate diameter 2000 mm︱table bore diameter 700 mm︱table turning speeds 51 U/min︱power capacity - milling spindle 53 kW︱drive motor for milling spindle - kW︱axial adjustment 1200 mm︱milling head swivable ca. +/- 45 °︱control Siemens 840D ︱total power requirement - kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. - m︱
          - CNC Control Siemens 840D - Internal Hob Head IFK - External Hob Head 2 machines available
            max. wheel diameter 3000 mm
            gear width 500 mm
            max. module 25 / 40
            spindle turning speed range 250 U/min
            feed speeds max. 4000 mm/min
            faceplate diameter 2000 mm
            table bore diameter 700 mm
            table turning speeds 51 U/min
            power capacity - milling spindle 53 kW
            drive motor for milling spindle - kW
            axial adjustment 1200 mm
            milling head swivable ca. +/- 45 °
            control Siemens 840D
            total power requirement - kW
            weight of the machine ca. 55 t
            dimensions of the machine ca. - m
            Description :
            - CNC Control Siemens 840D
            - Internal Hob Head IFK
            - External Hob Head

            2 machines available
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical PFAUTER PE 150 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19792 · Gear Hobbing Machine - Vertical

          PFAUTER - PE 150 CNC - - 1991/2013 - Fanuc 15M

          Technical details
          max. workpiece diameter 150 mm︱gear width 150 mm︱max. module 3 / 4 ︱min. module -- ︱distance cutter centre - clamping area 10 - 160 mm︱milling slide swivelling -/+ 45 Grad︱table diameter 160 mm︱table bore diameter 63 mm︱diameter of milling arbor 32 mm︱milling spindle turning speeds 150 - 660 U/min︱feed range 1 - 1500 mm/min︱feed range 0,001 - 40 mm/WU︱milling cutter dia. x width 130 x 220 mm︱milling spindle - taper SK 40 ︱dist. cutter spindle - workpiece spindle 10 - 160 mm︱shifting 170 mm︱table rotation speed 1 - 80 U/min︱rapid speed 3000 mm/min︱Control Fanuc 15M ︱total power requirement 50 kVA︱
          2013 retrofitted & equipped with: - CNC control Fanuc 15 M CNC (6 axes controlled), - loading magazine - chip conveyor - counterholder
            max. workpiece diameter 150 mm
            gear width 150 mm
            max. module 3 / 4
            min. module --
            distance cutter centre - clampin. 10 - 160 mm
            milling slide swivelling -/+ 45 Grad
            table diameter 160 mm
            table bore diameter 63 mm
            diameter of milling arbor 32 mm
            milling spindle turning speeds 150 - 660 U/min
            feed range 1 - 1500 mm/min
            feed range 0,001 - 40 mm/WU
            milling cutter dia. x width 130 x 220 mm
            milling spindle - taper SK 40
            dist. cutter spindle - workpiece. 10 - 160 mm
            shifting 170 mm
            table rotation speed 1 - 80 U/min
            rapid speed 3000 mm/min
            Control Fanuc 15M
            total power requirement 50 kVA
            Description :
            2013 retrofitted & equipped with:
            - CNC control Fanuc 15 M CNC (6 axes controlled),
            - loading magazine
            - chip conveyor
            - counterholder


          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical GLEASON-PFAUTER P 2001/3001 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-12370 · Gear Hobbing Machine - Vertical

          GLEASON-PFAUTER - P 2001/3001 CNC - - 1991/2006 rebuilt - Siemens Sinumerik 3M

          Technical details
          max. wheel diameter 3000 mm︱gear width 1200 mm︱max. module 30/40 ︱min. module 2 ︱table diameter 2500 mm︱table load capacity 400 kN︱hob dia. - max. 450 x 500 mm︱milling spindle speeds 10 - 165 U/min︱hob length max. 500 mm︱tip circle diameter 2050 mm︱tooth helical angle min/max 0 - 45 °︱center distance betw. workpiece-tool min/max. 150 - 1750 mm︱milling slide swivelling 50 Grad︱distance table / counter stay 1050 - 2050 mm︱shifting 300 mm︱workpiece weight 40 t︱table bore diameter 800 mm︱depth of hole 1100 mm︱main drive motor 37 kW︱min. workpiece diameter 290 mm︱
          Gear Hobbing Machine (also ideal for long and large shafts) equipped with: - CNC control Siemens Sinumerik 3 M for 4 axis (A/Y/X/Z) with electronic hand wheel - Automatic work cycles for axial, radial and tangential hobbing, crown/taper hobbing etc. - automatic single part equipment, taper milling, crowned milling, milling in several cuts, milling with indexing, changing feeds during milling, hobbing of the workpiece teeth,deep milling, automatic step-by-step milling shifting (Genaushifting), Diagonal milling - movable control panel - Universal hob head - set of change gears for differential gear (approx. 115pcs) - max workpiece dia with outer steady 2000mm, - tailstock column with tailstockarm, steadyrest support, dia 290 / 625 mm, - chip conveyor - paperband filter - cooling unit - Rexroth hydraulic - arbors (7) - levelling shoes (37) - automatic single indexing device Partially overhauled in 2006, e.g. new ball screw with nut,Table Bearing. Control system and electrics, motors were regularly adapted to the requirements.
            max. wheel diameter 3000 mm
            gear width 1200 mm
            max. module 30/40
            min. module 2
            table diameter 2500 mm
            table load capacity 400 kN
            hob dia. - max. 450 x 500 mm
            milling spindle speeds 10 - 165 U/min
            hob length max. 500 mm
            tip circle diameter 2050 mm
            tooth helical angle min/max 0 - 45 °
            center distance betw. workpiece-. 150 - 1750 mm
            milling slide swivelling 50 Grad
            distance table / counter stay 1050 - 2050 mm
            shifting 300 mm
            workpiece weight 40 t
            table bore diameter 800 mm
            depth of hole 1100 mm
            main drive motor 37 kW
            min. workpiece diameter 290 mm
            Description :
            Gear Hobbing Machine (also ideal for long and large shafts) equipped with:
            - CNC control Siemens Sinumerik 3 M for 4 axis (A/Y/X/Z)
            with electronic hand wheel
            - Automatic work cycles for axial, radial and tangential hobbing, crown/taper
            hobbing etc.
            - automatic single part equipment, taper milling, crowned milling,
            milling in several cuts, milling with indexing, changing feeds during milling,
            hobbing of the workpiece teeth,deep milling,
            automatic step-by-step milling shifting (Genaushifting), Diagonal milling
            - movable control panel
            - Universal hob head
            - set of change gears for differential gear (approx. 115pcs)
            - max workpiece dia with outer steady 2000mm,
            - tailstock column with tailstockarm, steadyrest support, dia 290 / 625 mm,
            - chip conveyor
            - paperband filter
            - cooling unit
            - Rexroth hydraulic
            - arbors (7)
            - levelling shoes (37)
            - automatic single indexing device

            Partially overhauled in 2006, e.g. new ball screw with nut,Table Bearing.
            Control system and electrics, motors were regularly adapted to the requirements.
          Datasheet
          Request / Contact

          Gear Honing Machine

          used  Gear Honing Machine FAESSLER K 400 A CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19716 · Gear Honing Machine

          FAESSLER - K 400 A CNC - - 2004 - NUM 1050

          Technical details
          workpiece diameter 400 mm︱centre distance 1000 mm︱honing length max. 1000 mm︱module range 0,5 - 6/8 ︱pressure angle 40 / 14 °︱max.helical angle +/-30 °︱min. workpiece diameter 5 mm︱gear hobbing width -max. 120 mm︱Control NUM 1050 ︱total power requirement ca. 11 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 2,4 x 2,3 x 2,4 m︱
          6-Axis machine with - CNC control NUM 1040 with Indramat Servo Drives - huge set of accesories - Set of Grinding tools - exhauster
            workpiece diameter 400 mm
            centre distance 1000 mm
            honing length max. 1000 mm
            module range 0,5 - 6/8
            pressure angle 40 / 14 °
            max.helical angle +/-30 °
            min. workpiece diameter 5 mm
            gear hobbing width -max. 120 mm
            Control NUM 1050
            total power requirement ca. 11 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 2,4 x 2,3 x 2,4 m
            Description :
            6-Axis machine with
            - CNC control NUM 1040 with Indramat Servo Drives
            - huge set of accesories
            - Set of Grinding tools
            - exhauster

          Datasheet
          Request / Contact

          Gear Shaping Machine

          used  Gear Shaping Machine CUGIR-LORENZ MD 631 (LS 630)


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-10722 · Gear Shaping Machine

          CUGIR-LORENZ - MD 631 (LS 630) - - 1991/12 -

          Technical details
          max. wheel diameter 650 mm︱gear width 200 mm︱max. module 10 ︱min. module 1 ︱work accuracy DIN 6 ︱clamping table diameter 710 mm︱table bore diameter 150 mm︱number of strokes - stepless 35,5 - 560 c/min︱max. ram stroke 230 mm︱feeds 3,55 - 40 mm/min︱radial feed 0,8 - 9 mm/min︱work-spindle diameter 110 mm︱total power requirement 28,2 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,8 x 2,3 x 2,5 m︱
          Gear shaping machine for the production of spur gears, for Internal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630 complete Modernisation + overhaul in 2012 with: - new painting - new electrical system from Telemecanique - Counter Holder - Chip conveyor - Coolant unit - change gears Not used in production again after overhaul
            max. wheel diameter 650 mm
            gear width 200 mm
            max. module 10
            min. module 1
            work accuracy DIN 6
            clamping table diameter 710 mm
            table bore diameter 150 mm
            number of strokes - stepless 35,5 - 560 c/min
            max. ram stroke 230 mm
            feeds 3,55 - 40 mm/min
            radial feed 0,8 - 9 mm/min
            work-spindle diameter 110 mm
            total power requirement 28,2 kW
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,8 x 2,3 x 2,5 m
            Description :
            Gear shaping machine for the production of spur gears, for
            Internal and external gears - Built under licence from LORENZ and identical in
            construction to LORENZ LS 630

            complete Modernisation + overhaul in 2012 with:
            - new painting
            - new electrical system from Telemecanique
            - Counter Holder
            - Chip conveyor
            - Coolant unit
            - change gears

            Not used in production again after overhaul
          Datasheet
          Request / Contact

          Gear Testing Machine

          used  Gear Testing Machine HOEFLER EMZ 632


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16810 · Gear Testing Machine

          HOEFLER - EMZ 632 - - overhauled - Wenzel Win Geco CNC

          Technical details
          max. wheel diameter 630 mm︱gear width 500 mm︱max. module 10 ︱min. module 0,5 ︱max.helical angle 0-90 °︱workpiece weight 100 kg︱centre height 20-1000 mm︱dai. of counterstay center 40 mm︱travel -x axis +/- 115 mm︱travel -y axis -15 bis +320 mm︱travel -z axis 500 mm︱base circle dia. - max. 620 mm︱Control Wenzel Win Geco CNC ︱electrics - voltage/frequency 380/50 V/Hz︱total power requirement 1,6 kVA︱weight of the machine ca. 1,2 t︱range L-W-H 3,4 x 3,2 x 2,5 mm︱
          Gear Test Center will be completely overhauled after Order and equipped with latest control system and software -- Wenzel Win Geco CNC (4 axes) -- Renishaw SP 80H measuring head -- Renishaw measuring systems in X-Y-Z axis -- Heidenhain Exe102 for signal adjustment Turntable SIN/TTL -- Metrotek Software - T-Stylus software: definition of the probes - Software T-Cali: Calibration of the probes - Software T-Align: The eccentricity and tilt of the workpiece axis are determined with the T-Align software. - Software T-Gear for the measurement of: profile, flank, pitch and runout External and internal gears, evaluation of the measurement results according to DIN, AGMA, ISO, Measuring in metric or inch - further software available on request - Conversion is carried out to customer order - Pictures show a completely overhauled machine in new condition - Laser measurement after conversion with highest measuring accuracy - 12 months warranty
            max. wheel diameter 630 mm
            gear width 500 mm
            max. module 10
            min. module 0,5
            max.helical angle 0-90 °
            workpiece weight 100 kg
            centre height 20-1000 mm
            dai. of counterstay center 40 mm
            travel -x axis +/- 115 mm
            travel -y axis -15 bis +320 mm
            travel -z axis 500 mm
            base circle dia. - max. 620 mm
            Control Wenzel Win Geco CNC
            electrics - voltage/frequency 380/50 V/Hz
            total power requirement 1,6 kVA
            weight of the machine ca. 1,2 t
            range L-W-H 3,4 x 3,2 x 2,5 mm
            Description :
            Gear Test Center
            will be completely overhauled after Order and equipped with latest control
            system and software
            -- Wenzel Win Geco CNC (4 axes)
            -- Renishaw SP 80H measuring head
            -- Renishaw measuring systems in X-Y-Z axis
            -- Heidenhain Exe102 for signal adjustment Turntable SIN/TTL
            -- Metrotek Software
            - T-Stylus software: definition of the probes
            - Software T-Cali: Calibration of the probes
            - Software T-Align: The eccentricity and tilt of the workpiece axis
            are determined with the T-Align software.
            - Software T-Gear for the measurement of: profile, flank, pitch and runout
            External and internal gears, evaluation of the measurement results according to
            DIN, AGMA, ISO, Measuring in metric or inch

            - further software available on request
            - Conversion is carried out to customer order
            - Pictures show a completely overhauled machine in new condition
            - Laser measurement after conversion with highest measuring accuracy
            - 12 months warranty


          Datasheet
          Request / Contact
          used  Gear Testing Machine KLINGELNBERG PFSU 1600 HP


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-09135 · Gear Testing Machine

          KLINGELNBERG - PFSU 1600 HP - - 1985/95 -

          Technical details
          max. wheel diameter 1600 mm︱gear width 250 mm︱max. module 20 ︱min. module 1,5 ︱base circle dia. - max. 1450 mm︱base circle dia. - min. 150 mm︱specimen weight from/to 4000 kg︱feeler adjustment movement - parallel 1400 mm︱max.helical angle 0 - 90 °︱wheel diameter with counterstay 1000 mm︱feeler adjustment movement - parallel 800 mm︱centre height 1150 mm︱electrics - voltage/frequency 400 / 50 V/Hz︱dimensions of the machine ca. 2,8 x 2,4 x 2,3 m︱total power requirement 2 kW︱weight of the machine ca. 3 t︱
          Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle; Profile corrections; Helix angles and leads; Lines of contact; Surface roughness; Concentricity of teeth; Tooth to tooth pitch error; Tooth thickness and tooth width over several teeth, Lots of other measuring possibilities. Accesories / Special Features: + Optical setting of base circle and optical angle settings without the use of base circle plates + Heavy workpieces can be tested on the machine. Motor-driven testing process, or manual control using hand wheels. + Auxiliary rotary table, dia. 480 mm, for mounting larger gears, with 2 sets of extending supports 400 and 470 mm long + Counter bracket Model AV 17 with maximum mounting length of 1150 mm + Separate electric cabinet for controlling manual movements, in conjunction with... + GFM Computer, Model ZMP 20 e with software for automatic dressing of gears,for the production of modern measuring printouts with graphics. The graphics are also displayed on a monitor. Various sub-programs and HP printer + Varous probe inserts and small parts, as well as a height adjustable holder for an indexing device, mounted on the back of the machine (but without the indexing device) Levelling feet in very good working condition - Machine can be inspected under power - Serial-Number B 2281
            max. wheel diameter 1600 mm
            gear width 250 mm
            max. module 20
            min. module 1,5
            base circle dia. - max. 1450 mm
            base circle dia. - min. 150 mm
            specimen weight from/to 4000 kg
            feeler adjustment movement - par. 1400 mm
            max.helical angle 0 - 90 °
            wheel diameter with counterstay 1000 mm
            feeler adjustment movement - par. 800 mm
            centre height 1150 mm
            electrics - voltage/frequency 400 / 50 V/Hz
            dimensions of the machine ca. 2,8 x 2,4 x 2,3 m
            total power requirement 2 kW
            weight of the machine ca. 3 t
            Description :
            Universal Involute and Helix Testing Machine - modernized 1995

            Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and
            shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle;
            Profile corrections; Helix angles and leads; Lines of contact; Surface roughness; Concentricity of teeth; Tooth to tooth pitch error; Tooth thickness and tooth width over several teeth, Lots of other measuring possibilities.
            Accesories / Special Features:
            + Optical setting of base circle and optical angle settings without the use of base circle plates
            + Heavy workpieces can be tested on the machine. Motor-driven testing process, or manual control using
            hand wheels.
            + Auxiliary rotary table, dia. 480 mm, for mounting larger gears, with 2 sets of extending supports
            400 and 470 mm long
            + Counter bracket Model AV 17 with maximum mounting length of 1150 mm
            + Separate electric cabinet for controlling manual movements, in conjunction with...
            + GFM Computer, Model ZMP 20 e with software for automatic dressing of gears,for the production of modern measuring printouts with graphics. The graphics are also displayed on a monitor. Various sub-programs and HP printer
            + Varous probe inserts and small parts, as well as a height adjustable holder for an indexing device, mounted
            on the back of the machine (but without the indexing device) Levelling feet

            in very good working condition - Machine can be inspected under power - Serial-Number B 2281
          Datasheet
          Request / Contact

          Herringbone Shaping Machine

          used  Herringbone Shaping Machine SYKES 5 E


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18119 · Herringbone Shaping Machine

          SYKES - 5 E - - ca 1975 -

          Technical details
          max. wheel diameter 1600 mm︱gear width 457 mm︱max. module 12,5 ︱min. module 2 ︱spindle bore 222 mm︱stroke 15-120 Hub/min︱roll feed 0.3 - 0.84 mm/min︱down feeds mm/Hub︱electrics - voltage/frequency 380 / 50 V/Hz︱total power requirement 10 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 3,5 x 3,3 x 2,5 m︱
          EXTERNAL GEARS: Blank diameter:- Max 63" 1600 mm Min 0 0 Face width, double helical 0 - 18" 0 - 457 mm Face width, spur or single helical 0 - 10" 0 - 254 mm INTERNAL GEARS: Blank diameter:- Max 66" 1676 mm Face width 0 - 8" 0 - 203 mm P.C.D.:- Max 66"- (2 x rim thickness)
            max. wheel diameter 1600 mm
            gear width 457 mm
            max. module 12,5
            min. module 2
            spindle bore 222 mm
            stroke 15-120 Hub/min
            roll feed 0.3 - 0.84 mm/min
            electrics - voltage/frequency 380 / 50 V/Hz
            total power requirement 10 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 3,5 x 3,3 x 2,5 m
            Description :
            EXTERNAL GEARS:
            Blank diameter:- Max 63" 1600 mm
            Min 0 0
            Face width, double helical 0 - 18" 0 - 457 mm
            Face width, spur or single helical 0 - 10" 0 - 254 mm
            INTERNAL GEARS:
            Blank diameter:- Max 66" 1676 mm
            Face width 0 - 8" 0 - 203 mm
            P.C.D.:- Max 66"- (2 x rim thickness)

          Datasheet
          Request / Contact

          Crankshaft Grinding Machine

          used  Crankshaft Grinding Machine KARATS CG8-NX


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17896 · Crankshaft Grinding Machine

          KARATS - CG8-NX - - 2009 - FANUC 31i A5

          Technical details
          workpiece length 6300 mm︱swing dia. 800 mm︱clamping length 6300 mm︱grinding diameter 800 mm︱grinding length 1660-6300 mm︱grinding wheel dia. x width 1500 x 150 x 650 mm︱grinding spindle speed 250 - 500 U/min︱work piece spindle speed 0,1-10 / 1 - 15 U/min︱table - swivable +/- °︱table speeds m/min︱max. workpiece weight between centres 5000 kg︱grinding motor 18,5 / 22 kW︱control FANUC 31i A5 ︱clamping diameter 200 - 600 mm︱diameter of main spindle 280 mm︱tailstock quill diameter 240 mm︱tailstock adjustment 90 mm︱feed in x - axis 0,01 - 10000 mm/min︱feed range Z-direction 1 - 6000 mm/min︱z-axis 7750 mm︱
          Namely automatic clamping, automatic gear shifting, automatic slightly loosening, automatic servo indexing, automatic centering, fast wheel advance, grinding shoulder, grinding arc, rough grinding, fine grinding, micro grinding, light grinding, servo center frame Constant torque tracking, automatic measurement, automatic return of the wheel frame, automatic wheel dressing and automatic compensation after dressing, wheel power back function. Machine has been used for crankshaft grinding equipped with: - CNC Control FANUC 31i A5 - C-Axis (16kw) - Tailstock (motorized) - CE-Sign machine has 19,980 hours
            workpiece length 6300 mm
            swing dia. 800 mm
            clamping length 6300 mm
            grinding diameter 800 mm
            grinding length 1660-6300 mm
            grinding wheel dia. x width 1500 x 150 x 650 mm
            grinding spindle speed 250 - 500 U/min
            work piece spindle speed 0,1-10 / 1 - 15 U/min
            max. workpiece weight between ce. 5000 kg
            grinding motor 18,5 / 22 kW
            control FANUC 31i A5
            clamping diameter 200 - 600 mm
            diameter of main spindle 280 mm
            tailstock quill diameter 240 mm
            tailstock adjustment 90 mm
            feed in x - axis 0,01 - 10000 mm/min
            feed range Z-direction 1 - 6000 mm/min
            z-axis 7750 mm
            Description :
            Namely automatic clamping, automatic gear shifting, automatic slightly
            loosening, automatic servo indexing, automatic centering, fast wheel advance,
            grinding shoulder, grinding arc, rough grinding, fine grinding, micro grinding,
            light grinding, servo center frame Constant torque tracking, automatic
            measurement, automatic return of the wheel frame, automatic wheel dressing and
            automatic compensation after dressing, wheel power back function.

            Machine has been used for crankshaft grinding
            equipped with:
            - CNC Control FANUC 31i A5
            - C-Axis (16kw)
            - Tailstock (motorized)
            - CE-Sign
            machine has 19,980 hours
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine

          used  Cylindrical Grinding Machine KOLB-SCHMALTZ R 6 x 5000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20229 · Cylindrical Grinding Machine

          KOLB-SCHMALTZ - R 6 x 5000 - - 1981/2020 -

          Technical details
          grinding diameter 605 mm︱grinding length 5000 mm︱centre height 315 mm︱peak cone 60 °︱grinding spindle slide adjustment 300 mm︱table - swivable 7 Grad︱table adjustment - longitudinal 5140 mm︱grinding wheel size 750 x 80 x 305 mm︱taper diameter 305 mm︱flange diameter 400 mm︱max. workpiece weight between centres 3000 kg︱grinding wheel drive 40 kW︱max. workpiece diameter 630 mm︱grinding wheel peripheral speeds: 35 m/s︱grinding wheel turining speeds 500 - 1100 U/min︱workpiece turning speeds 8 - 120 U/min︱table speeds 30 - 4500 mm/min︱total power requirement 58,5 kW︱weight of the machine ca. 18,5 t︱dimensions of the machine ca. - m︱
          The machine was geometrically overhauled in 2020 - 8 steady rests (30 - 200 mm) - Suction system - Coolant system with magnet/paper filter
            grinding diameter 605 mm
            grinding length 5000 mm
            centre height 315 mm
            peak cone 60 °
            grinding spindle slide adjustmen. 300 mm
            table - swivable 7 Grad
            table adjustment - longitudinal 5140 mm
            grinding wheel size 750 x 80 x 305 mm
            taper diameter 305 mm
            flange diameter 400 mm
            max. workpiece weight between ce. 3000 kg
            grinding wheel drive 40 kW
            max. workpiece diameter 630 mm
            grinding wheel peripheral speeds. 35 m/s
            grinding wheel turining speeds 500 - 1100 U/min
            workpiece turning speeds 8 - 120 U/min
            table speeds 30 - 4500 mm/min
            total power requirement 58,5 kW
            weight of the machine ca. 18,5 t
            dimensions of the machine ca. - m
            Description :
            The machine was geometrically overhauled in 2020

            - 8 steady rests (30 - 200 mm)
            - Suction system
            - Coolant system with magnet/paper filter
          Datasheet
          Request / Contact
          used  Cylindrical Grinding Machine HERKULES WS 500 x 3200


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18215 · Cylindrical Grinding Machine

          HERKULES - WS 500 x 3200 - - 1970/2016 -

          Technical details
          grinding diameter 915 mm︱grinding length 3200 mm︱swing diameter 915 mm︱grinding diameter - min. 0 mm︱centre height 450 mm︱centre distance 3200 mm︱grinding wheel size 750 x 305 x 80 mm︱max. workpiece weight between centres 8000 kg︱grinding wheel turining speeds 40 - 1500 U/min︱number of turns of spindle head 6- 45 U/min︱grinding motor ca. 30 kW︱electrics - voltage/frequency 380 / 50 V/Hz︱total power requirement 60 kW︱weight of the machine ca. 40 t︱dimensions of the machine ca. 12,0 x 5,0 x 2,5 m︱
          Machine reconditioned and modernised to Siemens 1998, including reconditioning of grinding wheel motor. Machine raised from 750mm dia. to 915mm dia in 2016. - Various Steadies - Coolant & Clarifier - Balancing Stand - Sony DRO
            grinding diameter 915 mm
            grinding length 3200 mm
            swing diameter 915 mm
            centre height 450 mm
            centre distance 3200 mm
            grinding wheel size 750 x 305 x 80 mm
            max. workpiece weight between ce. 8000 kg
            grinding wheel turining speeds 40 - 1500 U/min
            number of turns of spindle head 6- 45 U/min
            grinding motor ca. 30 kW
            electrics - voltage/frequency 380 / 50 V/Hz
            total power requirement 60 kW
            weight of the machine ca. 40 t
            dimensions of the machine ca. 12,0 x 5,0 x 2,5 m
            Description :
            Machine reconditioned and modernised to Siemens 1998, including
            reconditioning of grinding wheel motor.
            Machine raised from 750mm dia. to 915mm dia in 2016.

            - Various Steadies
            - Coolant & Clarifier
            - Balancing Stand
            - Sony DRO
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine - Universal

          used  Cylindrical Grinding Machine - Universal TOS-CETOS BUB 50 B CNC-3000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20015 · Cylindrical Grinding Machine - Universal

          TOS-CETOS - BUB 50 B CNC-3000 - - 2004 - Siemens Sinumerik 840D

          Technical details
          grinding diameter 500 mm︱grinding length 2900 mm︱centre height 250 mm︱Control Siemens Sinumerik 840D ︱centre distance 3000 mm︱stroke of the table max. 3200 mm︱table feed 0,001 - 4000 mm/min︱rapid traverse of table 9 m/min︱table swivelling +/- +4/-2 Grad︱grinding wheel size 500x100x203 mm︱peripheral speed 18 - 36 m/sec︱spindle speeds 6 - 900 U/min︱grinding head swivelling 90 Grad︱tailstock quill taper MT 5 ︱tailstock quill stroke 80 mm︱grinding spindle drive 9,5 kW︱working spindle drive 0,1 - 3,1 kW︱hydraulic motor 2,2 kW︱max. workpiece weight between centers 500 kg︱workpiece weight in steadies max. 840 kg︱
          * CNC control SIEMENS SINUMERIK 840D with operating panel OP 10 and color flat screen TFT 10,4" with machine control panel MPC 19" * remote control panel with electronic handwheel for feeding the grinding spindle stand and table * digital servo drives SIMODRIVE 611D for the axis X, Z , C9 * CNC fully controlled "B" axis 195 °/-30° - smallest programmable adjustment of the grinding spindle via CNC program 0.001 ° * CNC-fully controlled "C"-axis in mutual interpolation with "X" or "Z"-axis * complete internal grinding device, incl. hydraulic tiltable dresser on the table for diameter and plan dressing, coolant supply to workpiece spindle stock * internal grinding spindle * full cover of the machine * workpiece clamping control in axial axis * coolant system with belt filter system KNOLL VRF 300 * suction * electric 2-jaw bezel Ø 12-70 * 2 live centers MK 5 * 3-point bezel Ø 30-130 * hydraulic swivelable dresser * rigid dresser can be mounted on the machine bed * 2 pcs. 2 point bezel Ø 10-140 * 3-jaw chuck Ø 250 * 2 mounting flanges for solid discs * 2 auxiliary lunettes Ø 65-200 * Price when new 20004 according to seller: Euro 440.000,-
            grinding diameter 500 mm
            grinding length 2900 mm
            centre height 250 mm
            Control Siemens Sinumerik 840D
            centre distance 3000 mm
            stroke of the table max. 3200 mm
            table feed 0,001 - 4000 mm/min
            rapid traverse of table 9 m/min
            table swivelling +/- +4/-2 Grad
            grinding wheel size 500x100x203 mm
            peripheral speed 18 - 36 m/sec
            spindle speeds 6 - 900 U/min
            grinding head swivelling 90 Grad
            tailstock quill taper MT 5
            tailstock quill stroke 80 mm
            grinding spindle drive 9,5 kW
            working spindle drive 0,1 - 3,1 kW
            hydraulic motor 2,2 kW
            max. workpiece weight between ce. 500 kg
            workpiece weight in steadies max. 840 kg
            Description :
            * CNC control SIEMENS SINUMERIK 840D with operating panel OP 10
            and color flat screen TFT 10,4"
            with machine control panel MPC 19"
            * remote control panel with electronic handwheel for feeding
            the grinding spindle stand and table
            * digital servo drives SIMODRIVE 611D for the axis X, Z , C9
            * CNC fully controlled "B" axis 195 °/-30° - smallest
            programmable adjustment of the grinding spindle
            via CNC program 0.001 °
            * CNC-fully controlled "C"-axis in mutual interpolation
            with "X" or "Z"-axis
            * complete internal grinding device, incl. hydraulic tiltable
            dresser on the table for diameter and plan dressing,
            coolant supply to workpiece spindle stock
            * internal grinding spindle
            * full cover of the machine
            * workpiece clamping control in axial axis
            * coolant system with belt filter system KNOLL VRF 300
            * suction
            * electric 2-jaw bezel Ø 12-70
            * 2 live centers MK 5
            * 3-point bezel Ø 30-130
            * hydraulic swivelable dresser
            * rigid dresser can be mounted on the machine bed
            * 2 pcs. 2 point bezel Ø 10-140
            * 3-jaw chuck Ø 250
            * 2 mounting flanges for solid discs
            * 2 auxiliary lunettes Ø 65-200
            * Price when new 20004 according to seller: Euro 440.000,-


          Datasheet
          Request / Contact
          used  Cylindrical Grinding Machine - Universal HOMA / Gebr. Hoffmann Unigrinder 360


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19141 · Cylindrical Grinding Machine - Universal

          HOMA / Gebr. Hoffmann - Unigrinder 360 - - 1991 -

          Technical details
          grinding diameter 320 mm︱grinding length 1000 mm︱centre height 180 mm︱workpiece weight 150 kg︱workpiece turning speeds 25 - 224 U/min︱dimensions of grinding wheel 400x50x203 mm︱grinding speed 35 m/sec︱power capacity 4 kW︱weight 3300 kg︱dimensions 3,2 x 1,6 x 1,5 mm︱
          - digital display 2-axis Elesta - swiveling tool headstock - coolant tank - internal grinding device (without spindle)
            grinding diameter 320 mm
            grinding length 1000 mm
            centre height 180 mm
            workpiece weight 150 kg
            workpiece turning speeds 25 - 224 U/min
            dimensions of grinding wheel 400x50x203 mm
            grinding speed 35 m/sec
            power capacity 4 kW
            weight 3300 kg
            dimensions 3,2 x 1,6 x 1,5 mm
            Description :
            - digital display 2-axis Elesta
            - swiveling tool headstock
            - coolant tank
            - internal grinding device (without spindle)
          Datasheet
          Request / Contact

          Dressing Grinder

          used  Dressing Grinder NILES ZKX 400


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-07911 · Dressing Grinder

          NILES - ZKX 400 - - 1988 -

          Technical details
          table length - mm︱table width - mm︱grinding wheel diameter 400 mm︱max. width of grinding wheel 50 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 1 x 1 x 1 m︱
          For Pre-Dressing the Gear Grinding Wheels apart from the machine, particularly to profile grinding wheels for two-flank grinding, up to module 12
            table length - mm
            table width - mm
            grinding wheel diameter 400 mm
            max. width of grinding wheel 50 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,3 t
            dimensions of the machine ca. 1 x 1 x 1 m
            Description :
            For Pre-Dressing the Gear Grinding Wheels apart from the machine, particularly
            to profile
            grinding wheels for two-flank grinding, up to module 12
          Datasheet
          Request / Contact
          used  Dressing Grinder REISHAUER AM


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19142 · Dressing Grinder

          REISHAUER - AM - - 1974 -

          Technical details
          max. width of grinding wheel 104 mm︱ratio 00 ︱max. dia. of grinding wheel 400 mm︱max. module 7 ︱min. module 0,5 ︱pressure angle 10 - 30 °︱grinding worm dia. 270 - 400 mm︱width of grinding worm 62/84/104 mm︱grinding worm turning speeds: at profiling 18/35/70 U/min︱electrics - voltage/frequency 380 / 50 V/Hz︱long. movement of crowning device 156 mm︱total power requirement 3,0 kW︱weight of the machine ca. 1,7 t︱dimensions of the machine ca. 1,5 x 1,4 x 1,3 m︱
          SPA diamond wheel profiler (extra available on request)
            max. width of grinding wheel 104 mm
            ratio 00
            max. dia. of grinding wheel 400 mm
            max. module 7
            min. module 0,5
            pressure angle 10 - 30 °
            grinding worm dia. 270 - 400 mm
            width of grinding worm 62/84/104 mm
            grinding worm turning speeds: at. 18/35/70 U/min
            electrics - voltage/frequency 380 / 50 V/Hz
            long. movement of crowning devic. 156 mm
            total power requirement 3,0 kW
            weight of the machine ca. 1,7 t
            dimensions of the machine ca. 1,5 x 1,4 x 1,3 m
            Description :
            SPA diamond wheel profiler (extra available on request)
          Datasheet
          Request / Contact

          Face Grinding Machine

          used  Face Grinding Machine DISKUS DS 400 X2 OZ


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17089 · Face Grinding Machine

          DISKUS - DS 400 X2 OZ - - 2016 - Siemens 840 Dsl

          Technical details
          grinding length . mm︱grinding width . mm︱workpiece weight . kg︱grinding wheel dia. (unused wheel) 400 mm︱slide stroke Vertikal Z = 200 mm︱slide stroke Horizontal X = 950 mm︱speed 30 m/min︱grinding spindle drive 10 kW︱working spindle drive 6,3 kW︱max. workpiece diameter 150 mm︱workpiece width - max. 32 mm︱grinding wheel diameter 400 x 120 x 65 mm︱grinding wheel turning speeds 0 - 3000 mm-1︱peripheral speed 63 m/sec︱work piece spindle speed 0 - 3000 min-1︱electrics - voltage/frequency 400 / 50 V/Hz︱Control Siemens 840 Dsl ︱total power requirement 130 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 4,7 x 2,45x 2,2 m︱
          CNC-controlled plan-side grinder for one-sided grinding of end faces (then the workpiece is turned over for machining the 2nd side). equipped with: - 2 Working/Grinding Stations and with a turning station in the Middle - CNC control Siemens Sinumerik 840 Dsl
            grinding length . mm
            grinding width . mm
            workpiece weight . kg
            grinding wheel dia. (unused whee. 400 mm
            slide stroke Vertikal Z = 200 mm
            slide stroke Horizontal X = 950 mm
            speed 30 m/min
            grinding spindle drive 10 kW
            working spindle drive 6,3 kW
            max. workpiece diameter 150 mm
            workpiece width - max. 32 mm
            grinding wheel diameter 400 x 120 x 65 mm
            grinding wheel turning speeds 0 - 3000 mm-1
            peripheral speed 63 m/sec
            work piece spindle speed 0 - 3000 min-1
            electrics - voltage/frequency 400 / 50 V/Hz
            Control Siemens 840 Dsl
            total power requirement 130 kW
            weight of the machine ca. 9 t
            dimensions of the machine ca. 4,7 x 2,45x 2,2 m
            Description :
            CNC-controlled plan-side grinder
            for one-sided grinding of end faces (then the workpiece is turned over for
            machining the 2nd side).
            equipped with:
            - 2 Working/Grinding Stations and with a turning station in the Middle
            - CNC control Siemens Sinumerik 840 Dsl
          Datasheet
          Request / Contact
          used  Face Grinding Machine DISKUS DS 400 X OZ


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17088 · Face Grinding Machine

          DISKUS - DS 400 X OZ - - 2001 - Siemens 840 D

          Technical details
          grinding length . mm︱grinding width . mm︱workpiece weight . kg︱grinding wheel dia. (unused wheel) 400 mm︱slide stroke Vertikal Z = 200 mm︱slide stroke Horizontal X = 950 mm︱speed 30 m/min︱grinding spindle drive 10 kW︱working spindle drive 6,3 kW︱max. workpiece diameter 150 mm︱workpiece width - max. 32 mm︱grinding wheel diameter 400 x 120 x 65 mm︱grinding wheel turning speeds 0 - 3000 mm-1︱peripheral speed 63 m/sec︱work piece spindle speed 0 - 3000 min-1︱electrics - voltage/frequency 400 / 50 V/Hz︱Control Siemens 840 D ︱total power requirement 22 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 2,5 x 2 x 2,2 m︱
          CNC-controlled plan-side grinder with 2 spindles with a turning station - CNC control Siemens Sinumerik 840 D
            grinding length . mm
            grinding width . mm
            workpiece weight . kg
            grinding wheel dia. (unused whee. 400 mm
            slide stroke Vertikal Z = 200 mm
            slide stroke Horizontal X = 950 mm
            speed 30 m/min
            grinding spindle drive 10 kW
            working spindle drive 6,3 kW
            max. workpiece diameter 150 mm
            workpiece width - max. 32 mm
            grinding wheel diameter 400 x 120 x 65 mm
            grinding wheel turning speeds 0 - 3000 mm-1
            peripheral speed 63 m/sec
            work piece spindle speed 0 - 3000 min-1
            electrics - voltage/frequency 400 / 50 V/Hz
            Control Siemens 840 D
            total power requirement 22 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 2,5 x 2 x 2,2 m
            Description :
            CNC-controlled plan-side grinder with
            2 spindles with a turning station
            - CNC control Siemens Sinumerik 840 D
          Datasheet
          Request / Contact

          Grinding Machine - Centerless

          used  Grinding Machine - Centerless PETEWE SLR 250 E CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19717 · Grinding Machine - Centerless

          PETEWE - SLR 250 E CNC - - 1988 - Siemens Sinumerik 3

          Technical details
          grinding diameter max. 130 mm︱regulating wheel width 250 mm︱max. width of grinding wheel 250 mm︱Control Siemens Sinumerik 3 ︱total power requirement 39 kW︱weight of the machine ca. 6500 kg︱dimensions of the machine ca. m︱
          max.workpiece length for plunge-cut grinding 250 mm max.workpiece length for throughfeed grinding 300 mm grinding wheel size: diam. x width 600 x 250 mm regulating wheel size: diam. x width 350 x 250 mm grinding speed 35 / 45 / 60 m/sec. regulating wheel speed stfl. 8- 100 rpm (360 rpm) control wheel slide swivels + 2 to - 7° grinding wheel drive 22 kW total drive 35 kW equipped with: - Standard version with double bearing mounted grinding spindle and control spindle. - SIEMENS CNC control type Sinumerik 3 for control of all feeds, speeds and dressing programs. For rapid traverse approach, roughing, finishing, fine finishing and spark out, all feed and time values can be programmed. - The dressing speeds and dressing amounts as well as the number of workpiecesper dressing operation can also be programmed. number of workpieces per dressing operation can be entered directly into the control. - Electric handwheel for manual traverse of all axes - 2-axis CNC profiling and dressing device for the grinding wheel, - Copy dressing device for the regulating wheel via ruler. - Single-indexing workpiece support block built up with devices for the manual swiveling in and out of workpieces, fixtures for different workpiece lengths - DITTEL automatic balancing device for the grinding wheel - regulating wheel slide swivels and rotates with infinitely variable drive of the regulating wheel
            grinding diameter max. 130 mm
            regulating wheel width 250 mm
            max. width of grinding wheel 250 mm
            Control Siemens Sinumerik 3
            total power requirement 39 kW
            weight of the machine ca. 6500 kg
            Description :

            max.workpiece length for plunge-cut grinding 250 mm
            max.workpiece length for throughfeed grinding 300 mm
            grinding wheel size: diam. x width 600 x 250 mm
            regulating wheel size: diam. x width 350 x 250 mm
            grinding speed 35 / 45 / 60 m/sec.
            regulating wheel speed stfl. 8- 100 rpm (360 rpm)
            control wheel slide swivels + 2 to - 7°
            grinding wheel drive 22 kW
            total drive 35 kW

            equipped with:
            - Standard version with double bearing mounted grinding spindle and control
            spindle.
            - SIEMENS CNC control type Sinumerik 3 for control of all feeds,
            speeds and dressing programs. For rapid traverse approach, roughing,
            finishing, fine finishing and spark out, all feed and time values can be
            programmed.
            - The dressing speeds and dressing amounts as well as the number of
            workpiecesper dressing operation can also be programmed.
            number of workpieces per dressing operation can be entered directly into
            the control.
            - Electric handwheel for manual traverse of all axes
            - 2-axis CNC profiling and dressing device for the grinding wheel,
            - Copy dressing device for the regulating wheel via ruler.
            - Single-indexing workpiece support block built up with devices for the manual
            swiveling in and out of workpieces, fixtures for different workpiece
            lengths
            - DITTEL automatic balancing device for the grinding wheel
            - regulating wheel slide swivels and rotates with infinitely variable drive of
            the regulating wheel

          Datasheet
          Request / Contact

          Roll Grinder

          used  Roll Grinder YOMIS WF 1040 R


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19935 · Roll Grinder

          YOMIS - WF 1040 R - - 2015 - Fanuc 31i- B

          Technical details
          grinding diameter 1000 mm︱grinding length 4000 mm︱swing diameter mm︱clamping length max. 4000 mm︱grinding spindle speed 400 - 1200 U/min︱grinding wheel peripheral speeds: 45 m/s︱grinding motor 22 kW︱grinding wheel size 710 x 100 x 304,8 mm︱faceplate turning speed range -stepless- 3 - 70 U/min︱drive capacity - workpiece 4 kW︱feed range - grinding spindle 0,01 - 6000 mm/min︱workpiece weight 10 t︱Control Fanuc 31i- B ︱table (Z-axis) 4100 mm︱x-axis 460 mm︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          - CNC control Fanuc 31i - B - tailstock MT6 - Steady rest dia 100- 610mm - Hydrostatic spindle guide - Crowning +/- 5mm - Coolant tank & paper filter - Magnetic separater - Measuring system.
            grinding diameter 1000 mm
            grinding length 4000 mm
            clamping length max. 4000 mm
            grinding spindle speed 400 - 1200 U/min
            grinding wheel peripheral speeds. 45 m/s
            grinding motor 22 kW
            grinding wheel size 710 x 100 x 304,8 mm
            faceplate turning speed range -s. 3 - 70 U/min
            drive capacity - workpiece 4 kW
            feed range - grinding spindle 0,01 - 6000 mm/min
            workpiece weight 10 t
            Control Fanuc 31i- B
            table (Z-axis) 4100 mm
            x-axis 460 mm
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            - CNC control Fanuc 31i - B
            - tailstock MT6
            - Steady rest dia 100- 610mm
            - Hydrostatic spindle guide
            - Crowning +/- 5mm
            - Coolant tank & paper filter
            - Magnetic separater
            - Measuring system.

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          • 8  
          •   
          •   

          Kemmerich Werkzeugmaschinen GmbH  40789 - Monheim am Rhein Im Rottfeld 1a Deutschland
          Kemmerich Werkzeugmaschinen GmbH

          Im Rottfeld 1a



          Contact Trader


            Kemmerich Werkzeugmaschinen GmbH
           Im Rottfeld 1a
            40789 - Monheim am Rhein
            Deutschland
            +49 2173 207474
            +49 2173 207473
            info@kemmerich.biz
            www.kemmerich.biz
            Contact person:
          Herrn Andreas Kemmerich +49 2173 207474

            Seit 1982 ist die Firma Kemmerich Werkzeugmaschinen GmbH auf dem sich ständig ändernden Werkzeugmaschinen-Markt aktiv und handelt als international tätiges Maschinen-Handelsunternehmen mit gebrauchten Maschinen für die spanabhebende und spanlose Verarbeitung der metallverarbeitenden Industrie
          Kemmerich ist dabei auf Zahnradbearbeitungsmaschinen und Maschinen der Schwerzerspanung, wie zum Beispiel Dreh-, Fräs- und Schleifmaschinen sowie Bohrwerke, spezialisiert. Die Maschinen kommen unter anderem in der Automobilindustrie (Ausrüster und Zulieferer), im Zahnrad- und Getriebebau, der Produktion von Kugel- oder Wälzlagern, dem allgemeinen Maschinenbau zum Einsatz.

          Ansässig ist das Unternehmen inzwischen in Monheim am Rhein, im Herzen des Rheinlandes und in unmittelbarer Nähe zu den Messestädten Köln und Düsseldorf und deren Flughäfen. Dort stehen auf einer 2.200 qm großen, beheizbaren Ausstellungsfläche eine Vielzahl von konventionellen wie auch CNC/SPS-gesteuerten Metall be- und verarbeitenden Werkzeugmaschinen stets zur Besichtigung und Vorführung bereit.

          Mit einer Krankapazität von 32 Tonnen können jegliche Art von Maschinen gehändelt und bewegt werden. In der eigenen Werkstatt werden die Funktionsfähigkeit der Maschinen überprüft und gegebenenfalls festgestellte Mängel beseitigt. Zudem werden Maschinen auf Kundenwunsch modernisiert und modifiziert. Das Leistungsspektrum des Unternehmens umfasst zudem die Demontage oder Demontageüberwachung, Verladung, Verpackung sowie Land-, Seetransport und Zollabwicklungen, Montage und Inbetriebnahme beim Kunden durch Vermittlung von Spezialisten, Präsentation der Maschinen unter Strom (soweit möglich), Durchführung von Maschinenbewertungen und die Vermittlung von Kontakten.

          Anstatt in neue, teure Werkzeugmaschinen zu investieren und um lange Lieferzeiten zu umgehen, lohnt es sich oftmals, eine gut gepflegte Gebrauchtmaschine zu kaufen.




          Machine category


          · Abrichtschleifmaschine · Abwickelhaspel-Richtmaschine · Auswuchtmaschine · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Blechkaltrichtmaschine · Brückenlaufkran - Zweiträger · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppelscheibenschleifmaschine · Doppelständerexzenterpresse · Doppelständerziehpresse - Hydraulisch · Doppelständerziehpresse - Mechanisch · Drehmaschine - zyklengesteuert · Drehmaschine-konventionell-elektronisch · Elektronik / SPS-Steuerungen · Ersatzteile · Exzenterpresse - Doppelständer · Fahrständerfräsmaschine · Filteranlage · Flachschleifmaschine - Vertikal · Fräsmaschine - Universal · Futter · Führungsbahnschleifmaschine - Doppelst. · Gabelstapler - Gas · Gesenkschmiedepresse · Gewinde-Schnecken-Schleifmaschine · Gewinderollmaschine · Hartdreh- & Schleifzentrum · Hohlspindeldrehmaschine · Honmaschine - handbetätigt · Honmaschine - Innen - Horizontal · Hydraulische - Zweisäulenpresse · Hydraulische Presse · Innenschleifeinrichtung · Kaltwalzmaschine · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Kegelradfräsmaschine-Geradverzahnung · Koordinatenbohrmaschine · Kurbelwellenschleifmaschine · Langdrehautomat · Langgewinde- und Abwälzfräsmaschine · Leit- und Zugspindeldrehmaschine · Lynette · Mechanische - Doppelständerziehpresse · Mehrspindelstangenautomat · Messerschleifmaschine · Motor · Nutenfräsmaschine - Horizontal · Nutenziehmaschine · Pfeilradhobelmaschine · Plan- und Spitzendrehbank · Plandrehmaschine · Planscheibe · Planschleifmaschine · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Portal - Bearbeitungszentrum · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Querteilanlage · Radialbohrmaschine · Radialbohrmaschine - transportabel · Rundschleifmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtisch-Bohrungs-Schleifmaschine · Schweißanlage · Schwerdrehmaschine · Spiralkegelradschneidmaschine · Spitzendrehbank · Spitzenlose - Rundschleifmaschine · Späneförderer · Stangenlademagazin · Stanz- und Nibbelmaschine · Stanzautomat-Doppelständer · Stanzpresse - Doppelständer · Stoßmaschine - Vertikal · Stufenpresse · Stähleschleifmaschine · Tieflochbohrmaschine · Tischbohrwerk · Traghülsenplattenbohrwerk · Transferpresse · Vertikaldrehmaschine · Verzahnungsmeßmaschine · Walzendrehmaschine · Walzenschleifmaschine · Wasserstrahlschneidanlage · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal · Wälzfräser - Hinterschleifmaschine · Zahnflankenschleifmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradhonmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zweiständer - Langhobelfräsmaschine · Zweiständerlanghobelmaschine ·