,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Frech GmbH - Stockist for used machines

          Machinelist:


          Hydr. pressbrake

          used  Hydr. pressbrake ATLANTIC HPTE 40.200


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96917 · Hydr. pressbrake

          ATLANTIC - HPTE 40.200 - - 2001 - NC ATL 550

          Technical details
          pressure 200 t︱chamfer lenght 4100 mm︱distance between columns 3150 mm︱stroke - stepless adjustable 200 mm︱column arm 300 mm︱table height 1090 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱Control NC ATL 550 ︱hydraulic 265 bar︱voltage 380 V︱total power requirement 18,7 kW︱weight 15000 kg︱range L-W-H 4400 x 1900 x 3000 mm︱
          Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric backgauge, on ball screws * with 2 stop fingers, manually adjustable - manual table crowning, with analogue display * Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible MultiV - universal die block - rear + side protection - 2x front / robust support arms - free-moving 2-hand / double-foot operation - Operation manual
            pressure 200 t
            chamfer lenght 4100 mm
            distance between columns 3150 mm
            stroke - stepless adjustable 200 mm
            column arm 300 mm
            table height 1090 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            Control NC ATL 550
            hydraulic 265 bar
            voltage 380 V
            total power requirement 18,7 kW
            weight 15000 kg
            range L-W-H 4400 x 1900 x 3000 mm
            Description :
            Furnishing:
            - NC controlled hydraulic press brake, with torsion shaft
            - with ATLANTIC NC control ATL 550
            * Positioning of backgauge ( X )
            * Depth setting positioning ( Y1+Y2 )
            * Possibility of programming different programs
            * Storage capacity max. 200 programs - max. 400 sentences
            * Pivoting control panel, front left
            - electric backgauge, on ball screws
            * with 2 stop fingers, manually adjustable
            - manual table crowning, with analogue display
            * Adjustment at the front left, with a hand crank
            - divided deer foot upper tool 85°
            - reversible MultiV - universal die block
            - rear + side protection
            - 2x front / robust support arms
            - free-moving 2-hand / double-foot operation
            - Operation manual
          Datasheet
          Request / Contact
          used  Hydr. pressbrake ATLANTIC HPT 200136


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96884 · Hydr. pressbrake

          ATLANTIC - HPT 200136 - - 2000 -

          Technical details
          pressure 200 t︱chamfer lenght 3660 mm︱distance between columns mm︱Control ︱total power requirement kW︱weight of the machine ca. 13,50 t︱dimensions of the machine ca. m︱
          • 2 stop fingers, can be moved laterally • Block die with: V75, V50, V40, V25, V20, V10 (V50 and V25 defective at approx. 10cm in the middle) • Straight punch, height 200mm, length 3000mm, segmented • ATL 500 control for immersion depth (Y) and back gauge (X) • Centrally adjustable crowning • 2 support arms • Operation manual
            pressure 200 t
            chamfer lenght 3660 mm
            weight of the machine ca. 13,50 t
            Description :
            • 2 stop fingers, can be moved laterally
            • Block die with: V75, V50, V40, V25, V20, V10
            (V50 and V25 defective at approx. 10cm in the middle)
            • Straight punch, height 200mm, length 3000mm, segmented
            • ATL 500 control for immersion depth (Y) and back gauge (X)
            • Centrally adjustable crowning
            • 2 support arms
            • Operation manual
          Datasheet
          Request / Contact
          used  Hydr. pressbrake ATLANTIC HPE 36.230


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96831 · Hydr. pressbrake

          ATLANTIC - HPE 36.230 - - 1998 / 2014 -

          Technical details
          pressure 230 t︱chamfer lenght 3600 mm︱distance between columns 3150 mm︱column arm 300 mm︱table width 200 mm︱dayligth 450 mm︱stroke 200 mm︱back stop - adjustable 500 mm︱working feed 7,0 mm/sec︱return speed 80,0 mm/sec︱work height max. 965 mm︱oil volume 275 l︱Pressure power 265 bar︱total power requirement 18,7 kW︱weight of the machine ca. 13300 kg.︱range L-W-H 4100 x 2200 x 2670 mm︱
          Furnishing: - DELEM CNC control, model DA 56 (conversion in 2014) * Pivoting control panel in front left - CNC electric backgauge (X axis) * with 3x stop fingers, manually adjustable from the side - CNC pneumatic height adjustment of the stop fingers (R axis) - manual table crowning * Adjustment by hand crank, with analogue display - 1x reversible MULTI V - universal die block - 1x complete set of upper tools - other / various application tools - free-moving 2hand/foot control
            pressure 230 t
            chamfer lenght 3600 mm
            distance between columns 3150 mm
            column arm 300 mm
            table width 200 mm
            dayligth 450 mm
            stroke 200 mm
            back stop - adjustable 500 mm
            working feed 7,0 mm/sec
            return speed 80,0 mm/sec
            work height max. 965 mm
            oil volume 275 l
            Pressure power 265 bar
            total power requirement 18,7 kW
            weight of the machine ca. 13300 kg.
            range L-W-H 4100 x 2200 x 2670 mm
            Description :
            Furnishing:
            - DELEM CNC control, model DA 56 (conversion in 2014)
            * Pivoting control panel in front left
            - CNC electric backgauge (X axis)
            * with 3x stop fingers, manually adjustable from the side
            - CNC pneumatic height adjustment of the stop fingers (R axis)
            - manual table crowning
            * Adjustment by hand crank, with analogue display
            - 1x reversible MULTI V - universal die block
            - 1x complete set of upper tools
            - other / various application tools
            - free-moving 2hand/foot control
          Datasheet
          Request / Contact
          used  Hydr. pressbrake ATLANTIC HPT 40.180


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96879 · Hydr. pressbrake

          ATLANTIC - HPT 40.180 - - 1998 - NC ATL 550

          Technical details
          pressure 180 t︱chamfer lenght 4100 mm︱distance between columns 3150 mm︱stroke - stepless adjustable 200 mm︱column arm 300 mm︱table height 1090 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱Control NC ATL 550 ︱hydraulic 235 bar︱voltage 380 V︱total power requirement 15,0 kW︱weight 14200 kg︱range L-W-H 4400 x 1900 x 3000 mm︱
          Furnishing: - NC controlled hydraulic press brake * with torsion shaft - ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric back gauge * with 2 stop fingers, manually adjustable * on ball screws - manual table crowning, with analogue display - divided deer foot upper tool 85° - divided MultiV - universal matrix block - rear protection - free-moving 2-hand / double-foot operation
            pressure 180 t
            chamfer lenght 4100 mm
            distance between columns 3150 mm
            stroke - stepless adjustable 200 mm
            column arm 300 mm
            table height 1090 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            Control NC ATL 550
            hydraulic 235 bar
            voltage 380 V
            total power requirement 15,0 kW
            weight 14200 kg
            range L-W-H 4400 x 1900 x 3000 mm
            Description :
            Furnishing:
            - NC controlled hydraulic press brake
            * with torsion shaft
            - ATLANTIC NC control ATL 550
            * Positioning of backgauge ( X )
            * Depth setting positioning ( Y1+Y2 )
            * Possibility of programming different programs
            * Storage capacity max. 200 programs - max. 400 sentences
            * Pivoting control panel, front left
            - electric back gauge
            * with 2 stop fingers, manually adjustable
            * on ball screws
            - manual table crowning, with analogue display
            - divided deer foot upper tool 85°
            - divided MultiV - universal matrix block
            - rear protection
            - free-moving 2-hand / double-foot operation
          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used  Plate Shear - Hydraulic ATLANTIC XTS 3000


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94161 · Plate Shear - Hydraulic

          ATLANTIC - XTS 3000 - - 1992 - SC7p

          Technical details
          sheet width 3050 mm︱plate thickness 6,00 mm︱cutting angle 0.5 - 3.0 °︱down holder 18 Stück︱no. of strokes 9 / 14 Hub/min︱back stop - adjustable 750 mm︱Control SC7p ︱engine output 10.0 kW︱weight 4800 kg︱range L-W-H 3750 x 1600 x 2450 mm︱
          ** from a maintenance workshop ** well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - "backdrop-guided" - ATLANTIC NC control unit - model "SC7p" * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Finger protection at the front - EMERGENCY stop button at the front - rear sheet metal slides - User manual (PDF)
            sheet width 3050 mm
            plate thickness 6,00 mm
            cutting angle 0.5 - 3.0 °
            down holder 18 Stück
            no. of strokes 9 / 14 Hub/min
            back stop - adjustable 750 mm
            Control SC7p
            engine output 10.0 kW
            weight 4800 kg
            range L-W-H 3750 x 1600 x 2450 mm
            Description :
            ** from a maintenance workshop
            ** well maintained condition - checked annually (!!)

            Furnishing:
            - electro-hydraulic sheet metal shears - "backdrop-guided"
            - ATLANTIC NC control unit - model "SC7p"
            * Target / actual information about the motorized back gauge
            * Manual positioning possible via handwheel
            * Digital display for backgauge position
            * electro-hydraulic cutting angle adjustment
            * Adjustable retraction from the back gauge before the start of the cut
            * Front left control unit
            - electro-motorized back gauge 10-750 mm
            - manual cutting gap adjustment, from the rear
            - 1x front side stop, with mm scale
            - 3x front support arms
            - 1x freely movable foot switch
            - Finger protection at the front
            - EMERGENCY stop button at the front
            - rear sheet metal slides
            - User manual (PDF)

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Профиль трейдера: Frech GmbH

          Связаться с торговцем



            Frech GmbH
           Werderstr. 82
            74889 - Зинсхайм
            Германия
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Профиль пользователя Trader

          Основанная в 1945 Карлом Фрехом и имеющая миссис Николь Фрех в качестве менеджера поколения 3rd, компания может оглянуться на более чем восемь лет деловых традиций в городе Зинсхайм близ Гейдельберга в немецком регионе Баден. 

          Отель Sinsheim расположен на автомагистрали A6, на расстоянии часа езды на автостраде от аэропортов Франкфурт-на-Майне и Штутгарта. FRECH GmbH специализируется на работе с используемым оборудованием (разматыватели, перемотчики, роликовые лебедки, катушки, рулонные линии, линии продольной резки, линии порезания по длине, мельницы холодной прокатки и рулонные шлифовальные машины). 

          Кроме того, FRECH-Team выступает в качестве агента в следующих областях подержанной техники: рулонные машины, складные машины, шлифовальные станки, прессовые машины, прессы, металлолома и ножницы. Свяжитесь с нами, пожалуйста! - мы поможем вам и в других областях. В районе около 1000 квадратных метров залов и торговых площадей мы показываем ряд постоянно меняющихся подержанных машин, которые находятся в надлежащем рабочем состоянии и, по большей части, подходят для демонстрации. 

          Почему подержанная техника? 

          Подержанные машины в большинстве случаев доступны сразу и готовы к работе. Frech - это ваш первый адрес, когда вы хотите снизить свои капитальные затраты и повысить экономическую эффективность вашего оборудования. 

          Покупка и продажа подержанной техники - это вопрос доверия - Frech - ваш лучший контакт

          НАШИ КОНТАКТЫ




          Frech GmbH   74889 - Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Abwickelhaspel - Doppel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·