,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Frech GmbH - Stockist for used machines

          Machinelist:


          Folding Machine

          used  Folding Machine EHT MULTISWING 4-32


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76548 · Folding Machine

          EHT - MULTISWING 4-32 - - 1998 -

          Technical details
          sheet width 3200 mm︱plate thickness 4,00 mm︱distance between columns 3300 mm︱daylight opening OW 400 mm︱adjustment UW 80 mm︱pivoting angle 180 Grad︱clamping capacity max. 200 KN︱air pressure - required 4.5 - 6.0 bar︱total power requirement 9,8 kW︱oil volume 160 l︱weight 8500 kg︱range L-W-H 4550 x 2530 x 2275 mm︱
          ** well-maintained machine with lots of special accessories (!!) ** last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 * Swivel control panel, front right - CNC controlled / electro-motorized back gauge * pneumatic / lowerable material stop fingers * Adjustment speed max. 250 mm/sec. * Drive power 0.5 kw * Sheet metal support table at the back - motorized lower beam adjustment (S axis) * Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam * Adjustment range max. 400 mm * Lifting speed from .. max. 60.0 mm/sec. * Lifting speed to .. max. 115 mm/sec. - pneumatic upper tool clamping - pneumatic lower tool clamping - front protection device (swivel range) - 1x freely movable double foot switch - original operating instructions including electrical circuit diagram + hydraulic diagram **Special accessories included: - 1x split set EHT Geißfuß upper tool.. Height = 231 mm * 231 x 110 mm - hardened - 30° degrees - 1x split set EHT Geißfuß upper tool.. Height = 144 mm * 144 x 110 mm - hardened - 30° degrees - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm * 32 x 110 mm - hardened - 30° degrees - 1x split set EHT lower tool .. width = 15.0 mm * 68.5 x 20 mm - Radius 1.0 mm - 1x split set EHT lower tool .. width = 30.0 mm * 68.5 x 30 mm - Radius 1.0 mm - 1x EHT extension for the backgauge
            sheet width 3200 mm
            plate thickness 4,00 mm
            distance between columns 3300 mm
            daylight opening OW 400 mm
            adjustment UW 80 mm
            pivoting angle 180 Grad
            clamping capacity max. 200 KN
            air pressure - required 4.5 - 6.0 bar
            total power requirement 9,8 kW
            oil volume 160 l
            weight 8500 kg
            range L-W-H 4550 x 2530 x 2275 mm
            Description :
            ** well-maintained machine with lots of special accessories (!!)
            ** last maintenance/test in JUNE 2023

            Furnishing:
            - CNC screen control CYBELEC model DNC-884-PP32
            * Swivel control panel, front right
            - CNC controlled / electro-motorized back gauge
            * pneumatic / lowerable material stop fingers
            * Adjustment speed max. 250 mm/sec.
            * Drive power 0.5 kw
            * Sheet metal support table at the back
            - motorized lower beam adjustment (S axis)
            * Adjustment range max. 80.0 mm
            - hydraulic swivel movement of the lower beam
            - hydraulic movement of the upper beam
            * Adjustment range max. 400 mm
            * Lifting speed from .. max. 60.0 mm/sec.
            * Lifting speed to .. max. 115 mm/sec.
            - pneumatic upper tool clamping
            - pneumatic lower tool clamping
            - front protection device (swivel range)
            - 1x freely movable double foot switch
            - original operating instructions including electrical circuit diagram +
            hydraulic diagram

            **Special accessories included:
            - 1x split set EHT Geißfuß upper tool.. Height = 231 mm
            * 231 x 110 mm - hardened - 30° degrees
            - 1x split set EHT Geißfuß upper tool.. Height = 144 mm
            * 144 x 110 mm - hardened - 30° degrees
            - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm
            * 32 x 110 mm - hardened - 30° degrees
            - 1x split set EHT lower tool .. width = 15.0 mm
            * 68.5 x 20 mm - Radius 1.0 mm
            - 1x split set EHT lower tool .. width = 30.0 mm
            * 68.5 x 30 mm - Radius 1.0 mm
            - 1x EHT extension for the backgauge


          Datasheet
          Request / Contact

          Hydr. pressbrake

          used  Hydr. pressbrake EHT VARIOPRESS 225-45


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96920 · Hydr. pressbrake

          EHT - VARIOPRESS 225-45 - - 1999 -

          Technical details
          pressure 225 t︱chamfer lenght 4550 mm︱distance between columns 4050 mm︱between stands ca. 300 mm︱stroke 240 mm︱Control ︱total power requirement 18,50 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 5,30 x 2,35 x 3,37 m︱
          • Controlled axes: Y1, Y2, X, R • Control model DNC 800 2D graphics • Pneumatic tool clamping • CNC controlled crowning • Upper tools straight with replacement blade 4000mm segm • Multiple matrix block segm. 4000mm • Pneumatic die displacement • Sliding support arms • Operating manual
            pressure 225 t
            chamfer lenght 4550 mm
            distance between columns 4050 mm
            between stands ca. 300 mm
            stroke 240 mm
            total power requirement 18,50 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 5,30 x 2,35 x 3,37 m
            Description :
            • Controlled axes: Y1, Y2, X, R
            • Control model DNC 800 2D graphics
            • Pneumatic tool clamping
            • CNC controlled crowning
            • Upper tools straight with replacement blade 4000mm segm
            • Multiple matrix block segm. 4000mm
            • Pneumatic die displacement
            • Sliding support arms
            • Operating manual
          Datasheet
          Request / Contact
          used  Hydr. pressbrake EHT VARIOPRESS 225-60


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96896 · Hydr. pressbrake

          EHT - VARIOPRESS 225-60 - - 1998 -

          Technical details
          pressure 225 t︱chamfer lenght 6050 mm︱distance between columns 4550 mm︱column arm 300 mm︱ajustment speed 110 mm/sec︱work speed 9,0 mm/sec︱return speed 130 mm/sec︱work stroke 240 mm︱dayligth 560 mm︱table height 1000 mm︱table width 300 mm︱operating pressure max. 296 bar︱air pressure 4,5 - 6,0 bar︱oil volume 350 ltr.︱voltage 400 Volt︱total power requirement 18,5 kW︱weight 22400 kg︱range L-W-H 7870 x 3790 x 3660 mm︱
          Furnishing: - CYBELEC DNC 806 PS/K CNC control, swiveling at the front right * high resolution graphic screen * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library - CNC-controlled back gauge adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 250 mm/sec. * 2x manually adjustable stop fingers with pneumatic clamping - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 75 - 225 mm * Adjustment speed .. max. 100 mm/sec. - CNC-controlled / pneumatic die displacement (I-axis) - CNC-controlled front bending aids with function (BV1 axis) * Swivel angle max... 45 degrees * Swivel speed .. max. 45 degrees/sec. - WILA CNC-controlled electric table crowning - pneumatic EHT upper tool clamping - 2x freely movable 2 hand/foot controls - rear protective device (protective grille) - side protection device (protective grille) - original operating instructions + circuit diagrams * Special accessories included: - 1x EHT MULTI V reversible die block (V20/40/55/80 mm) - 1x UKB split upper tool set.. Length 6.050 mm - 1x EHT split upper tool set.. Length 1.550 mm
            pressure 225 t
            chamfer lenght 6050 mm
            distance between columns 4550 mm
            column arm 300 mm
            ajustment speed 110 mm/sec
            work speed 9,0 mm/sec
            return speed 130 mm/sec
            work stroke 240 mm
            dayligth 560 mm
            table height 1000 mm
            table width 300 mm
            operating pressure max. 296 bar
            air pressure 4,5 - 6,0 bar
            oil volume 350 ltr.
            voltage 400 Volt
            total power requirement 18,5 kW
            weight 22400 kg
            range L-W-H 7870 x 3790 x 3660 mm
            Description :
            Furnishing:
            - CYBELEC DNC 806 PS/K CNC control, swiveling at the front right
            * high resolution graphic screen
            * Representation as a line, area or volume drawing of the product
            * Clear, concise menus in the operator's language
            * Large tools and products library
            - CNC-controlled back gauge adjustment (X-axis)
            * Stop range X axis of bending line .. 5.0 - 1.000 mm
            * Adjustment speed .. max. 250 mm/sec.
            * 2x manually adjustable stop fingers with pneumatic clamping
            - CNC-controlled vertical adjustment of the stop fingers (R axis)
            * Adjustment range of table surface .. 75 - 225 mm
            * Adjustment speed .. max. 100 mm/sec.
            - CNC-controlled / pneumatic die displacement (I-axis)
            - CNC-controlled front bending aids with function (BV1 axis)
            * Swivel angle max... 45 degrees
            * Swivel speed .. max. 45 degrees/sec.
            - WILA CNC-controlled electric table crowning
            - pneumatic EHT upper tool clamping
            - 2x freely movable 2 hand/foot controls
            - rear protective device (protective grille)
            - side protection device (protective grille)
            - original operating instructions + circuit diagrams

            * Special accessories included:
            - 1x EHT MULTI V reversible die block (V20/40/55/80 mm)
            - 1x UKB split upper tool set.. Length 6.050 mm
            - 1x EHT split upper tool set.. Length 1.550 mm


          Datasheet
          Request / Contact
          used  Hydr. pressbrake EHT EHPS 15-3550+H500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96820 · Hydr. pressbrake

          EHT - EHPS 15-3550+H500 - - 1989 -

          Technical details
          pressure 150 t︱chamfer lenght 4050 mm︱distance between columns 3050 mm︱column arm 350 mm︱dayligth 430 mm︱piston stroke 220 mm︱table width 300 mm︱oil volume 390 ltr.︱pressure 265 bar︱total power requirement 18,5 kW︱weight of the machine ca. 13.000 kg︱range L-W-H 4900 x 2250 x 3200 mm︱
          ** from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual
            pressure 150 t
            chamfer lenght 4050 mm
            distance between columns 3050 mm
            column arm 350 mm
            dayligth 430 mm
            piston stroke 220 mm
            table width 300 mm
            oil volume 390 ltr.
            pressure 265 bar
            total power requirement 18,5 kW
            weight of the machine ca. 13.000 kg
            range L-W-H 4900 x 2250 x 3200 mm
            Description :
            ** from a maintenance workshop

            Furnishing:
            - CYBELEC CNC control, model DNC 30
            - Swivel control, right front
            - controlled axes Y1 + Y2 + X + R
            - CNC motorized table crowning
            - hydraulic upper tool clamping
            - Pneumatic lower tool clamping
            - 2x front pneumatic bending aids
            - 2x free-moving 2 hand controls/foot controls
            - lateral protective device (protective grille)
            - rear protective device (protective grille)
            - Operation manual
          Datasheet
          Request / Contact
          used  Hydr. pressbrake EHT EHPS 20-30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96909 · Hydr. pressbrake

          EHT - EHPS 20-30 - - 1986 - DNC 60

          Technical details
          pressure 200 t︱chamfer lenght 3050 mm︱distance between columns 2550 mm︱throat 300 mm︱stroke 350 mm︱ajustment speed 80,0 mm/sec︱working feed 10,0 mm/sec︱return speed 58,0 mm/sec︱dayligth 450 mm︱table width 300 mm︱work height max. 1140 mm︱control DNC 60 ︱oil volume 180 ltr.︱total power requirement 18,5 kW︱weight of the machine ca. 15.500 kg.︱range L-W-H 4200 x 2200 x 3200 mm︱
          Furnishing: - electro-hydraulic CNC press brake * last press test - carried out in 2022 - CYBELEC CNC control - model DNC 60 HP (conversion 2012) - Swivel operation, mounting side at the front right - electric back gauge, with ball screws (X axis) - electric-pneumatic height adjustment from the back gauge (R axis) - manual die shifting, including die shoe - electro-hydraulic upper tool clamping - electro-pneumatic lower tool clamping - EHT - split upper tools - EHT - split sub tools - 1x freely movable 2-hand foot control - manual central lubrication - Protective grille on the side + back - Operating instructions control + circuit diagrams machine
            pressure 200 t
            chamfer lenght 3050 mm
            distance between columns 2550 mm
            throat 300 mm
            stroke 350 mm
            ajustment speed 80,0 mm/sec
            working feed 10,0 mm/sec
            return speed 58,0 mm/sec
            dayligth 450 mm
            table width 300 mm
            work height max. 1140 mm
            control DNC 60
            oil volume 180 ltr.
            total power requirement 18,5 kW
            weight of the machine ca. 15.500 kg.
            range L-W-H 4200 x 2200 x 3200 mm
            Description :
            Furnishing:
            - electro-hydraulic CNC press brake
            * last press test - carried out in 2022
            - CYBELEC CNC control - model DNC 60 HP (conversion 2012)
            - Swivel operation, mounting side at the front right
            - electric back gauge, with ball screws (X axis)
            - electric-pneumatic height adjustment from the back gauge (R axis)
            - manual die shifting, including die shoe
            - electro-hydraulic upper tool clamping
            - electro-pneumatic lower tool clamping
            - EHT - split upper tools
            - EHT - split sub tools
            - 1x freely movable 2-hand foot control
            - manual central lubrication
            - Protective grille on the side + back
            - Operating instructions control + circuit diagrams machine
          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used  Plate Shear - Hydraulic EHT MULTICUT 10-30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94137 · Plate Shear - Hydraulic

          EHT - MULTICUT 10-30 - - 2003 -

          Technical details
          sheet width 3050 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱cutting angle adjustment 0,5 - 2,5 °︱cutting gap adjustment 0,05 - 1,0 mm︱back stop - adjustable 10 - 1000 mm︱adjustment speed 180 mm/s︱down holder 14 Stück︱strokes per minute 12 - 25 ︱oil volume 300 Liter︱0 max. 300 bar︱voltage 400 V︱main drive 18,5 kW︱weight of the machine ca. 10.000 kg.︱dimensions of the machine ca. 4080 x 2350 x 2060 mm︱
          ** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale
            sheet width 3050 mm
            plate thickness 10,00 mm
            thickness at "Niro-steel" 6,00 mm
            cutting angle adjustment 0,5 - 2,5 °
            cutting gap adjustment 0,05 - 1,0 mm
            back stop - adjustable 10 - 1000 mm
            adjustment speed 180 mm/s
            down holder 14 Stück
            strokes per minute 12 - 25
            oil volume 300 Liter
            0 max. 300 bar
            voltage 400 V
            main drive 18,5 kW
            weight of the machine ca. 10.000 kg.
            dimensions of the machine ca. 4080 x 2350 x 2060 mm
            Description :
            ** maintained condition (!!)
            ** was serviced annually by the manufacturer TRUMPF / EHT

            Furnishing:
            - Baffle-guided metal sheet shears with automatic cutting angle adjustment
            - Machine frame is an all-steel welded construction
            * Side stands are connected to the machine table
            - EHT / ELGO CNC control model P-9724, front left control panel
            * for backgauge adjustment and program selection (4 axes)
            - Automatic cutting angle adjustment
            - Automatic cutting gap adjustment
            - Automatic cutting gap compensation
            - Support table with ball rollers
            * There are recessed grips between the table sheets
            - front, hinged finger protection
            - hydraulically acting sheet metal hold-down devices
            - rear protective device (protective grille + light barriers)
            - 1x freely movable foot switch
            - original operating instructions

            **Special accessories included:
            - 1x EHT extra long side stop with mm scale & feet
            - 1x EHT extra long support arm with mm scale & feet
            - 2x EHT additional support arms with mm scale


          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Профиль трейдера: Frech GmbH

          Связаться с торговцем



            Frech GmbH
           Werderstr. 82
            74889 - Зинсхайм
            Германия
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Профиль пользователя Trader

          Основанная в 1945 Карлом Фрехом и имеющая миссис Николь Фрех в качестве менеджера поколения 3rd, компания может оглянуться на более чем восемь лет деловых традиций в городе Зинсхайм близ Гейдельберга в немецком регионе Баден. 

          Отель Sinsheim расположен на автомагистрали A6, на расстоянии часа езды на автостраде от аэропортов Франкфурт-на-Майне и Штутгарта. FRECH GmbH специализируется на работе с используемым оборудованием (разматыватели, перемотчики, роликовые лебедки, катушки, рулонные линии, линии продольной резки, линии порезания по длине, мельницы холодной прокатки и рулонные шлифовальные машины). 

          Кроме того, FRECH-Team выступает в качестве агента в следующих областях подержанной техники: рулонные машины, складные машины, шлифовальные станки, прессовые машины, прессы, металлолома и ножницы. Свяжитесь с нами, пожалуйста! - мы поможем вам и в других областях. В районе около 1000 квадратных метров залов и торговых площадей мы показываем ряд постоянно меняющихся подержанных машин, которые находятся в надлежащем рабочем состоянии и, по большей части, подходят для демонстрации. 

          Почему подержанная техника? 

          Подержанные машины в большинстве случаев доступны сразу и готовы к работе. Frech - это ваш первый адрес, когда вы хотите снизить свои капитальные затраты и повысить экономическую эффективность вашего оборудования. 

          Покупка и продажа подержанной техники - это вопрос доверия - Frech - ваш лучший контакт

          НАШИ КОНТАКТЫ




          Frech GmbH   74889 - Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Abwickelhaspel - Doppel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·