,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          WMT GmbH & Co.KG - Stockist for used machines

          Machinelist:


          Bench Drilling Machine

          used  Bench Drilling Machine WEBO Gradua 23


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23531 · Bench Drilling Machine

          WEBO - Gradua 23 - - neu -

          Technical details
          bore capacity in steel (diameter) 23 mm︱throat 310 mm︱bore stroke 150 mm︱turning speeds 90 - 2000 U/min︱ 420 x 360 mm︱total power requirement kW / Volt︱weight of the machine ca. 650 Kg︱dimensions 1,2 x 0,8 x 2,4 mm︱
          Bench drill - Left/right rotation - Advance - Base frame
            bore capacity in steel (diameter. 23 mm
            throat 310 mm
            bore stroke 150 mm
            turning speeds 90 - 2000 U/min
            420 x 360 mm
            weight of the machine ca. 650 Kg
            dimensions 1,2 x 0,8 x 2,4 mm
            Description :
            Bench drill
            - Left/right rotation
            - Advance
            - Base frame
          Datasheet
          Request / Contact
          used  Bench Drilling Machine UWM UWM 20


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76150 · Bench Drilling Machine

          UWM - UWM 20 - - -

          Technical details
          bore capacity in steel (diameter) 20 mm︱throat 195 mm︱bore stroke 80 mm︱boring spindle MK 2 ︱table surface area 320 x 300 mm︱total power requirement 0,75 kW︱weight of the machine ca. 0,072 t︱dimensions of the machine ca. 0,7 x 0,4 x 1,1 m︱
            bore capacity in steel (diameter. 20 mm
            throat 195 mm
            bore stroke 80 mm
            boring spindle MK 2
            table surface area 320 x 300 mm
            total power requirement 0,75 kW
            weight of the machine ca. 0,072 t
            dimensions of the machine ca. 0,7 x 0,4 x 1,1 m
          Datasheet
          Request / Contact
          used  Bench Drilling Machine LUNAN Trapano 1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23536 · Bench Drilling Machine

          LUNAN - Trapano 1 - - -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 260 mm︱bore stroke 110 mm︱turning speeds 50 - 3000 U/min︱ 500 x 420 mm︱total power requirement 1,1 kW / Volt︱tool taper Mk4 ︱weight of the machine ca. 400 Kg︱dimensions 0,8 x 0,6 x 1,4 mm︱
          Bench drill, unused - automatic feed - Thread cutting device - Left/right rotation - Coolant system - Tool case
            bore capacity in steel (diameter. 40 mm
            throat 260 mm
            bore stroke 110 mm
            turning speeds 50 - 3000 U/min
            500 x 420 mm
            total power requirement 1,1 kW / Volt
            tool taper Mk4
            weight of the machine ca. 400 Kg
            dimensions 0,8 x 0,6 x 1,4 mm
            Description :
            Bench drill, unused
            - automatic feed
            - Thread cutting device
            - Left/right rotation
            - Coolant system
            - Tool case
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used  Drilling and Milling M/C HUVEMA HU.25 VHG


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23534 · Drilling and Milling M/C

          HUVEMA - HU.25 VHG - - 2006 -

          Technical details
          bore capacity in steel (diameter) 25 mm︱bore stroke 150 mm︱spindle taper ISO 40115 - 1750 mm︱ mm︱ 600 mm︱ 350 mm︱ 350 mm︱table surface area 800 x 240 mm︱max. distance between table and spindle-nose mm︱connected load frequency 400 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 1,6 x 1,4 x 2,1 m︱
          Equipment: - Digital display - Horizontal spindle - Quill with hand feed - motor feed for X - Left/right running - Emergency stop switch - Drill head swiveling - Spindle protection - Machine light
            bore capacity in steel (diameter. 25 mm
            bore stroke 150 mm
            spindle taper ISO 40
            115 - 1750 mm
            600 mm
            350 mm
            350 mm
            table surface area 800 x 240 mm
            connected load frequency 400 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 1,6 x 1,4 x 2,1 m
            Description :
            Equipment:
            - Digital display
            - Horizontal spindle
            - Quill with hand feed
            - motor feed for X
            - Left/right running
            - Emergency stop switch
            - Drill head swiveling
            - Spindle protection
            - Machine light
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 25


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76016 · Drilling and Milling M/C

          HBM - BF 25 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 170 mm︱bore stroke 50 mm︱ 16 mm︱spindle taper MK 2 ︱spindle turning speed range 50 - 3000 U/min︱ 280 mm︱ 155 mm︱table surface area 500 x 180 mm︱connected load frequency 230 V︱max. distance between table and spindle-nose max. 320 mm︱total power requirement 0,8 kW︱weight of the machine ca. 150 Kg︱dimensions of the machine ca. 670 x 550 x 910 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 25 mm
            throat 170 mm
            bore stroke 50 mm
            16 mm
            spindle taper MK 2
            spindle turning speed range 50 - 3000 U/min
            280 mm
            155 mm
            table surface area 500 x 180 mm
            connected load frequency 230 V
            max. distance between table and . max. 320 mm
            total power requirement 0,8 kW
            weight of the machine ca. 150 Kg
            dimensions of the machine ca. 670 x 550 x 910 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM 40 H/V


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76022 · Drilling and Milling M/C

          HBM - 40 H/V - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 275 mm︱bore stroke 120 mm︱spindle taper MK 4 ︱turning speed range 75 - 3200 U/min︱ 190 mm︱ 490 mm︱table surface area 730 x 210 mm︱connected load frequency 400 V︱boring feeds: 0,1 - 0,18 - 0,26 mm/U︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 0,8 x 0,75 x 1,85 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 275 mm
            bore stroke 120 mm
            spindle taper MK 4
            turning speed range 75 - 3200 U/min
            190 mm
            490 mm
            table surface area 730 x 210 mm
            connected load frequency 400 V
            boring feeds: 0,1 - 0,18 - 0,26 mm/U
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 0,8 x 0,75 x 1,85 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM 40 H


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76020 · Drilling and Milling M/C

          HBM - 40 H - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 275 mm︱bore stroke 120 mm︱spindle taper MK 4 ︱turning speed range 75 - 3200 U/min︱ 190 mm︱ 490 mm︱table surface area 700 x 210 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 0,8 x 0,75 x 1,85 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 275 mm
            bore stroke 120 mm
            spindle taper MK 4
            turning speed range 75 - 3200 U/min
            190 mm
            490 mm
            table surface area 700 x 210 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 0,8 x 0,75 x 1,85 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C KAMI FKM 350-1 PD / SK40


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76005 · Drilling and Milling M/C

          KAMI - FKM 350-1 PD / SK40 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 130 mm︱spindle taper SK 40 ︱spindle turning speed range 75 - 3200 U/min︱ 500 mm︱ 230 mm︱table surface area 720 x 210 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 1,1 x 0,9 x 1,2 m︱
          domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 130 mm
            spindle taper SK 40
            spindle turning speed range 75 - 3200 U/min
            500 mm
            230 mm
            table surface area 720 x 210 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 1,1 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 1,1 x 0,9 x 1,2 m
            Description :
            domestic equipments
            • Digital display
            • Digital depth gauge for quill
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM TYP 16


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76011 · Drilling and Milling M/C

          HBM - TYP 16 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 180 mm︱bore stroke 85 mm︱spindle taper MK 2 ︱spindle diameter 47 mm︱spindle turning speed range 320 - 3300 U/min︱ 230 mm︱ 100 mm︱table surface area 420 x 155 mm︱connected load frequency 230 V︱ 900 x 600 x 300 cm︱total power requirement 0,75 kW︱weight of the machine ca. 8o Kg︱dimensions 0,7 x 0,7 x 0,8 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 16 mm
            throat 180 mm
            bore stroke 85 mm
            spindle taper MK 2
            spindle diameter 47 mm
            spindle turning speed range 320 - 3300 U/min
            230 mm
            100 mm
            table surface area 420 x 155 mm
            connected load frequency 230 V
            900 x 600 x 300 cm
            total power requirement 0,75 kW
            weight of the machine ca. 8o Kg
            dimensions 0,7 x 0,7 x 0,8 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 45 Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76001 · Drilling and Milling M/C

          HBM - BF 45 Profi - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 45 mm︱throat 230 mm︱bore stroke 125 mm︱spindle taper ISO 30 ︱spindle turning speed range 75 - 1600 U/min︱max. milling cutter diameter 80 mm︱ 560 mm︱ 230 mm︱table surface area 800 x 240 mm︱max. distance between table and spindle-nose 460 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 320 Kg︱dimensions of the machine ca. 1,0 x 0,8 x 1,45 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 45 mm
            throat 230 mm
            bore stroke 125 mm
            spindle taper ISO 30
            spindle turning speed range 75 - 1600 U/min
            max. milling cutter diameter 80 mm
            560 mm
            230 mm
            table surface area 800 x 240 mm
            max. distance between table and . 460 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 320 Kg
            dimensions of the machine ca. 1,0 x 0,8 x 1,45 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C KAMI BKM 4040


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76021 · Drilling and Milling M/C

          KAMI - BKM 4040 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 115 mm︱spindle taper SK 40 ︱spindle turning speed range 70 - 3200 U/min︱ 350 mm︱ 130 mm︱table surface area 590 x 190 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱feed 0,1 - 0,18 - 0,26 mm/U︱total power requirement 1,1 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 0,7 x 0,95 x 1,75 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 115 mm
            spindle taper SK 40
            spindle turning speed range 70 - 3200 U/min
            350 mm
            130 mm
            table surface area 590 x 190 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            feed 0,1 - 0,18 - 0,26 mm/U
            total power requirement 1,1 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 0,7 x 0,95 x 1,75 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C KAMI FKM 349 V


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76008 · Drilling and Milling M/C

          KAMI - FKM 349 V - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 185 mm︱bore stroke 50 mm︱spindle taper MK 3 ︱spindle turning speed range 50 - 2500 U/min︱ 178 mm︱ 480 mm︱table surface area 700 x 180 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 160 t︱dimensions of the machine ca. 0,75 x 0,8 x 0,9 m︱
          domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 25 mm
            throat 185 mm
            bore stroke 50 mm
            spindle taper MK 3
            spindle turning speed range 50 - 2500 U/min
            178 mm
            480 mm
            table surface area 700 x 180 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 160 t
            dimensions of the machine ca. 0,75 x 0,8 x 0,9 m
            Description :
            domestic equipments
            • Digital depth gauge
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C KAMI FKM 650A


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76002 · Drilling and Milling M/C

          KAMI - FKM 650A - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 360 mm︱bore stroke 150 mm︱spindle turning speed range 120 - 3000 U/min︱spindle taper SK 40650 mm︱ 320 mm︱vertical adjustment 500 mm︱table surface area 1000 x 300 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,85 t︱dimensions of the machine ca. 1,25 x 1.5 x 2,3 m︱
          New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system
            bore capacity in steel (diameter. 50 mm
            throat 360 mm
            bore stroke 150 mm
            spindle turning speed range 120 - 3000 U/min
            spindle taper SK 40
            650 mm
            320 mm
            vertical adjustment 500 mm
            table surface area 1000 x 300 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,85 t
            dimensions of the machine ca. 1,25 x 1.5 x 2,3 m
            Description :
            New Model Industrial Drilling and Milling Machine with Manual Transmission and
            High Speed Range. The prism guide in the Z-axis ensures a high degree of
            precision even in the most difficult milling jobs.

            Domestic equipments:
            • automatic feed in X-axis
            • 3-axis digital display
            • motorized Z-axis
            • Feed in quill
            • Left-right-run high
            • tapping attachment
            • Gear head swiveling
            • Coolant system
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 30 DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76014 · Drilling and Milling M/C

          HBM - BF 30 DRO - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 198 mm︱bore stroke 75 mm︱ 16 mm︱spindle taper MK3 ︱spindle turning speed range 95 - 2840 U/min︱ 320 mm︱ 190 mm︱table surface area 700 x 190 mm︱connected load frequency 400 V︱max. distance between table and spindle-nose 55 - 405 mm︱total power requirement 1,1 kW︱weight of the machine ca. 180 Kg︱dimensions of the machine ca. 0,75 x 1,05 x 1,3 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 30 mm
            throat 198 mm
            bore stroke 75 mm
            16 mm
            spindle taper MK3
            spindle turning speed range 95 - 2840 U/min
            320 mm
            190 mm
            table surface area 700 x 190 mm
            connected load frequency 400 V
            max. distance between table and . 55 - 405 mm
            total power requirement 1,1 kW
            weight of the machine ca. 180 Kg
            dimensions of the machine ca. 0,75 x 1,05 x 1,3 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C KAMI FKM 350 PD / SK40


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76004 · Drilling and Milling M/C

          KAMI - FKM 350 PD / SK40 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 130 mm︱spindle taper SK 40 ︱spindle turning speed range 70 - 3200 U/min︱ 520 mm︱ 230 mm︱table surface area 730 x 210 mm︱connected load frequency 400 V︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,32 t︱dimensions of the machine ca. 1,1 x 0,9 x 1,15 m︱
          domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 130 mm
            spindle taper SK 40
            spindle turning speed range 70 - 3200 U/min
            520 mm
            230 mm
            table surface area 730 x 210 mm
            connected load frequency 400 V
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,32 t
            dimensions of the machine ca. 1,1 x 0,9 x 1,15 m
            Description :
            domestic equipments
            • Digital depth gauge
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 60


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76009 · Drilling and Milling M/C

          HBM - BF 60 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 230 mm︱bore stroke 125 mm︱spindle taper ISO 40 ︱spindle turning speed range 115 - 1750 U/min︱ 560 mm︱ 175 mm︱table surface area 1000 x 240 mm︱max. distance between table and spindle-nose 375 mm︱connected load frequency 400 V︱total power requirement 0,85/1,5 kW︱weight of the machine ca. 0,95 t︱dimensions of the machine ca. 1,3 x 1,2 x 2,1 m︱
          Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional.
            bore capacity in steel (diameter. 35 mm
            throat 230 mm
            bore stroke 125 mm
            spindle taper ISO 40
            spindle turning speed range 115 - 1750 U/min
            560 mm
            175 mm
            table surface area 1000 x 240 mm
            max. distance between table and . 375 mm
            connected load frequency 400 V
            total power requirement 0,85/1,5 kW
            weight of the machine ca. 0,95 t
            dimensions of the machine ca. 1,3 x 1,2 x 2,1 m
            Description :
            Domestic equipments:
            automatic feed and handwheel.
            Drill chuck with MK4 holder
            Digital depth display
            Left / right switch.
            Emergency stop switch
            Pivot head swiveling
            Spindle protection.
            Small toolbox

            Machine base and X-axis feed optional.
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 30


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76015 · Drilling and Milling M/C

          HBM - BF 30 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 200 mm︱bore stroke 70 mm︱ 16 mm︱spindle taper MK3 ︱spindle turning speed range 50 - 3000 U/min︱ 220 mm︱ 425 mm︱table surface area 700 x 210 mm︱connected load frequency V︱max. distance between table and spindle-nose 470 mm︱total power requirement 1,5 kW︱weight of the machine ca. 230 Kg︱dimensions of the machine ca. 0,75 x 1,05 x 1,2 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content
            bore capacity in steel (diameter. 32 mm
            throat 200 mm
            bore stroke 70 mm
            16 mm
            spindle taper MK3
            spindle turning speed range 50 - 3000 U/min
            220 mm
            425 mm
            table surface area 700 x 210 mm
            max. distance between table and . 470 mm
            total power requirement 1,5 kW
            weight of the machine ca. 230 Kg
            dimensions of the machine ca. 0,75 x 1,05 x 1,2 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content

          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 16


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76013 · Drilling and Milling M/C

          HBM - BF 16 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 170 mm︱bore stroke 50 mm︱ 16 mm︱spindle taper MK2 ︱spindle turning speed range 50 - 2250 U/min︱ 320 mm︱ 145 mm︱table surface area 500 x 140 mm︱connected load frequency 230 V︱total power requirement 0,5 kW︱weight of the machine ca. 90 Kg︱dimensions of the machine ca. 0,5 x 0,45 x 0,84 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 16 mm
            throat 170 mm
            bore stroke 50 mm
            16 mm
            spindle taper MK2
            spindle turning speed range 50 - 2250 U/min
            320 mm
            145 mm
            table surface area 500 x 140 mm
            connected load frequency 230 V
            total power requirement 0,5 kW
            weight of the machine ca. 90 Kg
            dimensions of the machine ca. 0,5 x 0,45 x 0,84 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C UWM BF20 Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76019 · Drilling and Milling M/C

          UWM - BF20 Vario - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 185 mm︱bore stroke 50 mm︱ 20 mm︱spindle taper MK 2 ︱spindle diameter mm︱spindle turning speed range 100-1500 / 200-3000 U/min︱ 175 mm︱ 280 mm︱table surface area 500 x 180 mm︱connected load frequency 230 V︱total power requirement 0,85 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 0,86 x 0,6 x 0,9 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 16 mm
            throat 185 mm
            bore stroke 50 mm
            20 mm
            spindle taper MK 2
            spindle turning speed range 100-1500 / 200-3000 U/min
            175 mm
            280 mm
            table surface area 500 x 180 mm
            connected load frequency 230 V
            total power requirement 0,85 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 0,86 x 0,6 x 0,9 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 45 Profi DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76030 · Drilling and Milling M/C

          HBM - BF 45 Profi DRO - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 45 mm︱quill stroke 125 mm︱ 560 mm︱ 230 mm︱table surface area 800 x 240 mm︱spindle turning speed range 75 - 3200 U/min︱max. milling cutter diameter 80 mm︱spindle taper ISO 30 ︱max. distance between table and spindle-nose 460 mm︱throat 230 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 580 Kg︱dimensions of the machine ca. 1,2 x 1,0 x 2,1 m︱
          Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.
            bore capacity in steel (diameter. 45 mm
            quill stroke 125 mm
            560 mm
            230 mm
            table surface area 800 x 240 mm
            spindle turning speed range 75 - 3200 U/min
            max. milling cutter diameter 80 mm
            spindle taper ISO 30
            max. distance between table and . 460 mm
            throat 230 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 580 Kg
            dimensions of the machine ca. 1,2 x 1,0 x 2,1 m
            Description :
            Equipment:
            All axes with 3-digital display.
            Quill travel has separate digit display.
            Automatic feed in X-axis and quill.
            Motorized Z-axis.
            tapping device.
            coolant system.
            machine base.
            Collet set, SK tool holder.
            Further machine accessories in box.
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 25 DRO big


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76018 · Drilling and Milling M/C

          HBM - BF 25 DRO big - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 175 mm︱bore stroke 50 mm︱ 16 mm︱spindle taper ISO 30 ︱spindle turning speed range 50 - 3000 U/min︱ 380 mm︱ 175 mm︱table surface area 700 x 180 mm︱connected load frequency 230 V︱max. distance between table and spindle-nose max. 320 mm︱total power requirement 0,75 kW︱weight of the machine ca. 150 Kg︱dimensions of the machine ca. 670 x 550 x 910 m︱
          Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools
            bore capacity in steel (diameter. 25 mm
            throat 175 mm
            bore stroke 50 mm
            16 mm
            spindle taper ISO 30
            spindle turning speed range 50 - 3000 U/min
            380 mm
            175 mm
            table surface area 700 x 180 mm
            connected load frequency 230 V
            max. distance between table and . max. 320 mm
            total power requirement 0,75 kW
            weight of the machine ca. 150 Kg
            dimensions of the machine ca. 670 x 550 x 910 m
            Description :
            Drilling and milling machine with large table
            Digital display SINO 3-axis.
            Digital display quill stroke.
            2 speed levels.
            Left/Right switch
            Pan head left/right 90°
            spindle protection.
            incl. tool box with various tools
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 30 DRO big


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76017 · Drilling and Milling M/C

          HBM - BF 30 DRO big - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 200 mm︱bore stroke 70 mm︱ 16 mm︱spindle taper MK3 ︱spindle turning speed range 50 - 3000 U/min︱ 565 mm︱ 220 mm︱table surface area 840 x 210 mm︱connected load frequency 400 V︱max. distance between table and spindle-nose max. 470 mm︱total power requirement 1,1 kW︱weight of the machine ca. 230 Kg︱dimensions of the machine ca. 0,75 x 1,05 x 1,3 m︱
          Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools
            bore capacity in steel (diameter. 30 mm
            throat 200 mm
            bore stroke 70 mm
            16 mm
            spindle taper MK3
            spindle turning speed range 50 - 3000 U/min
            565 mm
            220 mm
            table surface area 840 x 210 mm
            connected load frequency 400 V
            max. distance between table and . max. 470 mm
            total power requirement 1,1 kW
            weight of the machine ca. 230 Kg
            dimensions of the machine ca. 0,75 x 1,05 x 1,3 m
            Description :
            Drilling and milling machine with large table
            Digital display SINO 3-axis.
            Digital display quill stroke.
            2 speed levels.
            Left/Right switch
            Pan head left/right 90°
            Recording MC 3 - B16.
            Drill chuck 3 - 16 mm.
            spindle protection.
            Machine stand.
            incl. tool box with various tools
          Datasheet
          Request / Contact

          High-Speed Radial Drilling Machine

          used  High-Speed Radial Drilling Machine HKS 32 MG


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23542 · High-Speed Radial Drilling Machine

          HKS - 32 MG - - 1979 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱bore capacity in cast iron 40 mm︱workpiece height max. 550 mm︱table surface area 1530 x 750 mm︱spindle taper MT 4 ︱throat 1000 mm︱bore spindle stroke 170 mm︱spindle turning speed range 38 - 2000 U/min︱voltage 380 V︱connected load 5,0 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 2,0 x 1,6 x 2,1 m︱
          Fast radials with - feed - 3 tables - Thread cutting device - Coolant system - Tool holder with tools see pictures
            bore capacity in steel (diameter. 32 mm
            bore capacity in cast iron 40 mm
            workpiece height max. 550 mm
            table surface area 1530 x 750 mm
            spindle taper MT 4
            throat 1000 mm
            bore spindle stroke 170 mm
            spindle turning speed range 38 - 2000 U/min
            voltage 380 V
            connected load 5,0 kW
            weight of the machine ca. 2,0 t
            dimensions of the machine ca. 2,0 x 1,6 x 2,1 m
            Description :
            Fast radials with
            - feed
            - 3 tables
            - Thread cutting device
            - Coolant system
            - Tool holder with tools
            see pictures
          Datasheet
          Request / Contact

          Magnet-Drilling-Machine

          used  Magnet-Drilling-Machine Stahlgruppe SG 450 M


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76307 · Magnet-Drilling-Machine

          Stahlgruppe - SG 450 M - - -

          Technical details
          Boring power 35 mm︱turning speeds max. 810 U/min︱core drilling diameter max. 35 mm︱tool taper Weldon 19,05 mm︱bore stroke 210 mm︱weight 11 kg︱connected load frequency 230 V︱engine output 1,6 kW︱Dimensions (LxWxH) 0,4 x 0,25 x 0,275 m︱
          Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg
            Boring power 35 mm
            turning speeds max. 810 U/min
            core drilling diameter max. 35 mm
            tool taper Weldon 19,05 mm
            bore stroke 210 mm
            weight 11 kg
            connected load frequency 230 V
            engine output 1,6 kW
            Dimensions (LxWxH) 0,4 x 0,25 x 0,275 m
            Description :
            Magnetic drill with:
            2-speed motor.
            Coolant system.
            Robust mobile storage / carrying bag.
            MAGNET HOLDING FORCE 1800 kg
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          • 8  
          •   
          •   

          WMT GmbH  &  Co.kg   46342 - Velen-Ramsdorf Siemensstraße 1 Deutschland
          WMT GmbH & Co.kg

          Siemensstraße 1



          Contact Trader


            WMT GmbH & Co.kg
           Siemensstraße 1
            46342 - Velen-Ramsdorf
            Deutschland
            +49 2863 92477-47
            +49 2863 92477-50
            info@w-m-t.de
            www.w-m-t.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abricht- und Dickenhobel · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsäge mobil · Bandsägeautomat - Horizontal · Behälterdrehvorrichtung · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbearbeitungsanlagen · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bügelmesschraube · Bügelsäge · Bügelsäge - Automatisch · Bürstenentgrater · Doppel-Gehrungsäge · Doppelschleifbock · Drehmaschine - zyklengesteuert · Drehmeißel/Drehstahl · Einständerpresse - Hydraulisch · Flachschleifmaschine · Flachstahl- / Plattenbearbeitung · Fräsmaschine - Universal · Gabelhubwagen - Elektro · Gabelhubwagen Elektro · Gabelhubwagen Hand · Gabelstapler Diesel · Gabelstapler Elektro · Gabelstapler Gas · Generatoren · Gewindebohrmaschine · Gewindeschneidmaschine · Gleitschleifanlage · Handhebelpresse · Handwerkzeuge · Hubtische · Kaltkreissäge · Kaltkreissäge - Automatik · Kapp- und Gehrungssäge · Kniehebelpresse - Einständer · Kombi-Schleifmaschine · Kompressoren · Krananlagen · Kreissäge · Kreuztisch · Kühlmittelanlage · Langgutregale · Lasthebemagnete · Leit- und Zugspindeldrehmaschine · Magnetbohrmaschine · Magnetspannplatte · Maschinen Untergestell · Maschinenleuchten · Messerschleifmaschine · Plasmaschneidegerät · Pneumatische Presse · Polierbock · Profil- Ring- Biegemaschine · Profilstahlschere - Kombiniert · Punktschweißmaschine · Regalsysteme · Reinigungssysteme · Richtpresse - Doppelständer · Rohrausschleifer · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Räumnadeln · Schnellradiale - Bohrmaschine · Schraubenkompressor · Schraubstock · Schubladenschränke · Schweißanlage · Schweißdrehtisch · Schweißdrehtisch - rund · Schweißrauchabsaugung · Schweißtisch · Schweißtisch-Zubehör · Schweißzubehör · Schwenkbiegemaschine · Schwerlastanhänger · Sicken- und Bördelmaschine · Sonstige Fördertechnik · Sonstiges · Strahlanlage · Ständerbohrmaschine · Sägeblattschärfmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tischbohrmaschine · Tischbohrwerk · Tischdrehbank · Trowalisiermaschine · Unterstellbock · Wasserpumpe · Werkbänke · Werkstattpressen - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeugschränke · Werkzeugwagen ·