,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          STEINHAND GmbH - Stockist for used machines

          Machinelist:


          Automatic Curve Lathe

          used  Automatic Curve Lathe WACHTLER A25 GLE


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1239 · Automatic Curve Lathe

          WACHTLER - A25 GLE - - 2018 -

          Technical details
          - - - - - Main spindle - - - - - - - - - - -︱hollow 25 mm︱--- Subspindle --- - - - - - -︱hollow 15 mm︱turning speed range 1.400 - 2.800 U/min︱
          Single spindle automatic lathe WACHTLER - A25 GLE with bar feeder Further information / scope of delivery: All accessories are included. The machine is in a well-maintained condition. Please refer to the offer for further technical details. Machine video available on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: A 25 | A-25 | A25GLE
            - - - - - Main spindle - - - - - - - - - - -
            hollow 25 mm
            --- Subspindle --- - - - - - -
            hollow 15 mm
            turning speed range 1.400 - 2.800 U/min
            Description :
            Single spindle automatic lathe WACHTLER - A25 GLE with bar feeder


            Further information / scope of delivery:

            All accessories are included.

            The machine is in a well-maintained condition.


            Please refer to the offer for further technical details.

            Machine video available on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: A 25 | A-25 | A25GLE
          Datasheet
          Request / Contact

          CNC Turning & Grinding Center - vertical

          used  CNC Turning & Grinding Center - vertical EMAG VSC 400 DDS


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1308 · CNC Turning & Grinding Center - vertical

          EMAG - VSC 400 DDS - - 2010 - SIEMENS 840D

          Technical details
          max. swing over bed 260 mm︱max. turning diameter 315 mm︱control SIEMENS 840D ︱spindle bore 50 mm︱spindle diameter in front bearing 100 mm︱Torque 460 Nm︱chucking diameter 200 / 250 mm︱with 1-bed slide ︱number of cross-slides 1 ︱tool taper HSK C63 ︱numbers of positions in the tool changer 12 ︱max. tool diameter 40 mm︱Dimensions (L x W x H) 5.500 x 11.600 x 3.300 mm︱weight of the machine 12.500 kg︱
          6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS Additional equipment: - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka) The machine is in very good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC400DDS | VSC400 DDS | VSC-400 DDS | VSC 400DDS | VSC 400-DDS
            max. swing over bed 260 mm
            max. turning diameter 315 mm
            control SIEMENS 840D
            spindle bore 50 mm
            spindle diameter in front bearin. 100 mm
            Torque 460 Nm
            chucking diameter 200 / 250 mm
            number of cross-slides 1
            tool taper HSK C63
            numbers of positions in the tool. 12
            max. tool diameter 40 mm
            Dimensions (L x W x H) 5.500 x 11.600 x 3.300 mm
            weight of the machine 12.500 kg
            Description :
            6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS


            Additional equipment:

            - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka)

            The machine is in very good condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VSC400DDS | VSC400 DDS | VSC-400 DDS | VSC 400DDS | VSC 400-DDS
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center INDEX G400 S-1/300


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1044 · CNC Turning- and Milling Center

          INDEX - G400 S-1/300 - - 2011 - INDEX - C200-4D

          Technical details
          work travel X:320 & Z:1250 mm︱rapid traverse X:20 & Z:40 m/min︱control INDEX - C200-4D ︱--- MOTOR MILLING SPINDLE --- ------------------------- ︱tool taper HSK A63 ︱turning speeds 12000 U/min︱Power 27,5 KW︱front bearing 80 mm︱turning speeds 3000 U/min︱MAIN SPINDLE D102 direct drive ------------------------- ︱spindle diameter in front bearing 1200 mm︱spindle passage 102 mm︱forward bearing diameter 170 mm︱
          CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300
            work travel X:320 & Z:1250 mm
            rapid traverse X:20 & Z:40 m/min
            control INDEX - C200-4D
            --- MOTOR MILLING SPINDLE --- -------------------------
            tool taper HSK A63
            turning speeds 12000 U/min
            Power 27,5 KW
            front bearing 80 mm
            turning speeds 3000 U/min
            MAIN SPINDLE D102 direct drive -------------------------
            spindle diameter in front bearin. 1200 mm
            spindle passage 102 mm
            forward bearing diameter 170 mm
            Description :
            CNC Turning- and Milling Center | INDEX - G400 S-1/300

            The machine is in a very good condition
            with only 2500 H main working hours.

            + MARPOSS probe

            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: G400 | G 400 | G400 S1 300 | G400S1 300
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DOOSAN PUMA MX 2100 ST


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1538 · CNC Turning- and Milling Center

          DOOSAN - PUMA MX 2100 ST - - 2010 - FANUC 31i-B

          Technical details
          swing over bed 750 mm︱Swing over cross slide 650 mm︱max. turning diameter 540 mm︱Max. Turning length 1.020 mm︱bar material dia. 65 mm︱control FANUC 31i-B ︱Dimensions (L x W x H) 4.850 x 2.525 x 2.805 mm︱weight of the machine 12.000 kg︱
          CNC Turning- and Milling Center | DOOSAN - PUMA MX 2100 ST equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2100ST | MX-2100 ST | MX 2100ST | MX2100 ST
            swing over bed 750 mm
            Swing over cross slide 650 mm
            max. turning diameter 540 mm
            Max. Turning length 1.020 mm
            bar material dia. 65 mm
            control FANUC 31i-B
            Dimensions (L x W x H) 4.850 x 2.525 x 2.805 mm
            weight of the machine 12.000 kg
            Description :
            CNC Turning- and Milling Center | DOOSAN - PUMA MX 2100 ST
            equipped with chip conveyor.


            Additional equipment:

            + counter spindle
            + B axis


            The machine is in good condition.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MX2100ST | MX-2100 ST | MX 2100ST | MX2100 ST
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center INDEX C100


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1663 · CNC Turning- and Milling Center

          INDEX - C100 - - 2008 - Siemens - Sinumerik

          Technical details
          --- Main- / Counter- spindle --- - - - - - -︱hollow 42 mm︱spindle diameter in front bearing 75 mm︱- - - - - General data - - - - - - - - - - -︱control Siemens - Sinumerik ︱no. of tools in turret 1 10 Stk./pcs.︱no. of tools in turret 2 10 Stk./pcs.︱no. of tools in turret 3 10 Stk./pcs.︱Tools speed 8.000 U/min︱- - - - - travels - - - - - - - - - - -︱travel -x axis 70 mm︱travel -y axis 70 (+/-35) mm︱travel -z axis 250 mm︱travel -x2 axis 70 mm︱travel -y2 axis 70 (+/-35) mm︱travel -z2 axis 400 mm︱travel -x3 axis 125 mm︱
          CNC Turning- and Milling Center | INDEX - C100 equipped with a turret for driven tools as well as chip conveyors and bar feeder. The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 100 | C-100
            --- Main- / Counter- spindle --- - - - - - -
            hollow 42 mm
            spindle diameter in front bearin. 75 mm
            - - - - - General data - - - - - - - - - - -
            control Siemens - Sinumerik
            no. of tools in turret 1 10 Stk./pcs.
            no. of tools in turret 2 10 Stk./pcs.
            no. of tools in turret 3 10 Stk./pcs.
            Tools speed 8.000 U/min
            - - - - - travels - - - - - - - - - - -
            travel -x axis 70 mm
            travel -y axis 70 (+/-35) mm
            travel -z axis 250 mm
            travel -x2 axis 70 mm
            travel -y2 axis 70 (+/-35) mm
            travel -z2 axis 400 mm
            travel -x3 axis 125 mm
            Description :
            CNC Turning- and Milling Center | INDEX - C100 equipped with a turret for
            driven tools as well as chip conveyors and bar feeder.

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.
            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: C 100 | C-100
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK QTN 350 II M


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1639 · CNC Turning- and Milling Center

          MAZAK - QTN 350 II M - - 2007 - Mazatrol Nexus

          Technical details
          turning diameter 420 mm︱centre distance 1500 mm︱control Mazatrol Nexus ︱bar capacity 102 mm︱turning speeds 35 - 3.300 U/min︱spindle bore 112 mm︱numbers of turret head positions 12
          CNC Turning- and Milling Center | MAZAK - QTN 350 II M Scope of delivery: driven tools - 1x straight - 1x angle The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: QUICK TURN | NEXUS 350 | NEXUS350 | QTN350M
            turning diameter 420 mm
            centre distance 1500 mm
            control Mazatrol Nexus
            bar capacity 102 mm
            turning speeds 35 - 3.300 U/min
            spindle bore 112 mm
            numbers of turret head positions 12
            Description :
            CNC Turning- and Milling Center | MAZAK - QTN 350 II M


            Scope of delivery:
            driven tools
            - 1x straight
            - 1x angle

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: QUICK TURN | NEXUS 350 | NEXUS350 | QTN350M
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DOOSAN PUMA MX 2000 S


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1539 · CNC Turning- and Milling Center

          DOOSAN - PUMA MX 2000 S - - 2005 - FANUC 18i-TB

          Technical details
          max. turning diameter 540 mm︱max. turning length 1.020 mm︱bar capacity 65 mm︱Spindle speed 5.000 min -1︱driven tools turning speeds 10.000 U/min︱control FANUC 18i-TB ︱Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm︱machine weight ab. 12.000 kg︱
          CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S
            max. turning diameter 540 mm
            max. turning length 1.020 mm
            bar capacity 65 mm
            Spindle speed 5.000 min -1
            driven tools turning speeds 10.000 U/min
            control FANUC 18i-TB
            Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm
            machine weight ab. 12.000 kg
            Description :
            CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S
            equipped with chip conveyor.


            Additional equipment:

            + counter spindle
            + B axis


            The machine is in good condition.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center OKUMA MacTurn250-W


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1599 · CNC Turning- and Milling Center

          OKUMA - MacTurn250-W - - 2004 - OKUMA OSP-U100L

          Technical details
          swing over bed 550 mm︱Swing over cross slide 530 mm︱control OKUMA OSP-U100L ︱travel -x1 axis 475 mm︱travel -x2 axis 160 mm︱travel -z1 axis 1.170 mm︱travel -z2 axis 1.155 mm︱travel -y axis 160 mm︱travel C - axis 360° °︱travel B' - axis 210° °︱numbers of positions in the tool changer 84 ︱number of tapers in turret head 12 ︱Dimensions (L x W x H) 4.320 x 2.645 x 2.900 mm︱weight of the machine 12.500 kg︱
          CNC Turning- and Milling Center | OKUMA - MacTurn250-W with palletizing system and robot handling The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MacTurn250 | MacTurn250 W | MacTurn 250 | MacTurn-250
            swing over bed 550 mm
            Swing over cross slide 530 mm
            control OKUMA OSP-U100L
            travel -x1 axis 475 mm
            travel -x2 axis 160 mm
            travel -z1 axis 1.170 mm
            travel -z2 axis 1.155 mm
            travel -y axis 160 mm
            travel C - axis 360° °
            travel B' - axis 210° °
            numbers of positions in the tool. 84
            number of tapers in turret head 12
            Dimensions (L x W x H) 4.320 x 2.645 x 2.900 mm
            weight of the machine 12.500 kg
            Description :
            CNC Turning- and Milling Center | OKUMA - MacTurn250-W
            with palletizing system and robot handling


            The machine is in a well-maintained condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MacTurn250 | MacTurn250 W | MacTurn 250 | MacTurn-250
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center NAKAMURA TOME WT-250 MMY


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1661 · CNC Turning- and Milling Center

          NAKAMURA TOME - WT-250 MMY - - 2003 - Fanuc 18i TB

          Technical details
          swivelling range 250 mm︱max. working diameter 210 mm︱max. working lenght 555 mm︱control Fanuc 18i TB ︱spindle taper JIS A2-6“ ︱spindle diameter 71 mm︱number of spindle speeds 5.000 U/min︱
          CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with bar loader (Profimat) Equipment/accessories: - Bar loader - driven tool holders Further technical data: - Chuck size: Hainbuch collets - Distance between spindle end faces: 555 mm - Max. outside diameter for bar material: 65 mm - Spindle power 1 = 11 / 15 kW - Spindle power 2 = 7.5 / 11 kW - Max. torque: Nm 265 (kgf-m 27) The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY
            swivelling range 250 mm
            max. working diameter 210 mm
            max. working lenght 555 mm
            control Fanuc 18i TB
            spindle taper JIS A2-6“
            spindle diameter 71 mm
            number of spindle speeds 5.000 U/min
            Description :
            CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped
            with bar loader (Profimat)


            Equipment/accessories:
            - Bar loader
            - driven tool holders


            Further technical data:
            - Chuck size: Hainbuch collets
            - Distance between spindle end faces: 555 mm
            - Max. outside diameter for bar material: 65 mm
            - Spindle power 1 = 11 / 15 kW
            - Spindle power 2 = 7.5 / 11 kW
            - Max. torque: Nm 265 (kgf-m 27)


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: WT-250MMY | WT 250MMY | WT250MMY
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center JOHNFORD SL-50-CF-Y


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1540 · CNC Turning- and Milling Center

          JOHNFORD - SL-50-CF-Y - - 2003 - FANUC Oi-TB

          Technical details
          bar material dia. 75 mm︱max. max. swing dia. 540 mm︱turning length 650 mm︱control FANUC Oi-TB ︱machine weight ab. 6.200 kg︱
          CNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Y equipped with chip conveyor and bar feeder. Additional equipment: + C axis + Y axis + driven tools The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF Y
            bar material dia. 75 mm
            max. max. swing dia. 540 mm
            turning length 650 mm
            control FANUC Oi-TB
            machine weight ab. 6.200 kg
            Description :
            CNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Y
            equipped with chip conveyor and bar feeder.


            Additional equipment:

            + C axis
            + Y axis
            + driven tools

            The machine is in good condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF Y
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center INDEX G300


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1364 · CNC Turning- and Milling Center

          INDEX - G300 - - 2000 - Siemens C 200-4

          Technical details
          travel -x axis 140 mm︱travel -z axis 710 mm︱control Siemens C 200-4 ︱main spindle speeds 5.000 U/min︱bore diameter 65 mm︱numbers of positions in the tool changer 24 (2x12)
          CNC Turning- and Milling Center | INDEX - G300 + 2 turret + tailstock + bar feeder: Index MBL 65 Scope of delivery: - tool holder fixed The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G 300 | G-300
            travel -x axis 140 mm
            travel -z axis 710 mm
            control Siemens C 200-4
            main spindle speeds 5.000 U/min
            bore diameter 65 mm
            numbers of positions in the tool. 24 (2x12)
            Description :
            CNC Turning- and Milling Center | INDEX - G300

            + 2 turret
            + tailstock
            + bar feeder: Index MBL 65

            Scope of delivery:
            - tool holder fixed


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: G 300 | G-300

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center NAKAMURA TOME WT-250 MMY


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1662 · CNC Turning- and Milling Center

          NAKAMURA TOME - WT-250 MMY - - 1999 - FANUC 18i-T

          Technical details
          spindle passage H: 65 / G: 51 mm︱numbers of positions in the tool changer 2x12 ︱control FANUC 18i-T ︱tool taper BMT55 ︱collet chuck Hainbuch (RD65)
          CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with tool changer and measuring system. Equipment/accessories: - parts gripper - small package of tools (2x radial & 2x axial driven tools + various passive holders) The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY
            spindle passage H: 65 / G: 51 mm
            numbers of positions in the tool. 2x12
            control FANUC 18i-T
            tool taper BMT55
            collet chuck Hainbuch (RD65)
            Description :
            CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY
            equipped with tool changer and measuring system.


            Equipment/accessories:
            - parts gripper
            - small package of tools
            (2x radial & 2x axial driven tools + various passive holders)


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: WT-250MMY | WT 250MMY | WT250MMY
          Datasheet
          Request / Contact

          Facing Lathe

          used  Facing Lathe ZERBST DP05/W08


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1376 · Facing Lathe

          ZERBST - DP05/W08 - - 1985 - 2010 - Siemens Sinumerik 840D-sl

          Technical details
          faceplate diameter 4.000 mm︱travel -x axis 4.500 mm︱travel -z axis 600 mm︱control Siemens Sinumerik 840D-sl ︱feed range 0 - 8.000 mm/min︱turning speeds 1) 0,7 - 5,6 U/min︱turning speeds 2) 2,8 - 22,4 U/min︱turning speeds 2,1 - 56 U/min︱tool taper Sauter
          Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08
            faceplate diameter 4.000 mm
            travel -x axis 4.500 mm
            travel -z axis 600 mm
            control Siemens Sinumerik 840D-sl
            feed range 0 - 8.000 mm/min
            turning speeds 1) 0,7 - 5,6 U/min
            turning speeds 2) 2,8 - 22,4 U/min
            turning speeds 2,1 - 56 U/min
            tool taper Sauter
            Description :
            Facing Lathe | ZERBST - DP05/W08

            Scope of delivery:

            - Chip conveyor
            - Hydraulic unit

            The ZERBST - DP05/W08 has been retrofitted in 2010.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DP05W08 | DP05 W08 | DP05-W08
          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe muega TT-42


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1610 · Turning Automatic Lathe - swiss lathe

          muega - TT-42 - - 2011 -

          Technical details
          --- Main- / Counter- spindle --- - - - - - -︱bar capacity 42 mm︱max. turning diameter 100 mm︱Max. Turning length 100 mm︱number of spindle speeds 4.000 U/min︱--- Subspindle --- - - - - - -︱spindle bore 30 mm︱- - - - - General data - - - - - - - - - - -︱Number of axles 12 St.︱travel -x axis 150 mm︱travel -y axis 410 mm︱travel -z axis 190 mm︱travel -x1 axis 380 mm︱travel -y1 axis 400 mm︱travel -z1 axis 340 mm︱numbers of positions in the tool changer 29 Stk./pcs.︱number of driven tools 12 Stk./pcs.︱
          Turning Automatic Lathe - swiss lathe | müga - TT-42 equipped with chip conveyor and bar feeder. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TT 42 | TT42 | müga TT-42 | müga TT42 | müga TT 42
            --- Main- / Counter- spindle --- - - - - - -
            bar capacity 42 mm
            max. turning diameter 100 mm
            Max. Turning length 100 mm
            number of spindle speeds 4.000 U/min
            --- Subspindle --- - - - - - -
            spindle bore 30 mm
            - - - - - General data - - - - - - - - - - -
            Number of axles 12 St.
            travel -x axis 150 mm
            travel -y axis 410 mm
            travel -z axis 190 mm
            travel -x1 axis 380 mm
            travel -y1 axis 400 mm
            travel -z1 axis 340 mm
            numbers of positions in the tool. 29 Stk./pcs.
            number of driven tools 12 Stk./pcs.
            Description :
            Turning Automatic Lathe - swiss lathe | müga - TT-42
            equipped with chip conveyor and bar feeder.

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            Please refer to further technical details in the attachement of the offer.
            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: TT 42 | TT42 | müga TT-42 | müga TT42 | müga TT 42
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe DMG SPRINT 42 linear


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1625 · Turning Automatic Lathe - swiss lathe

          DMG - SPRINT 42 linear - - 2005 -

          Technical details
          - - - - - - - - -︱- - - - - - - - -︱- - - - - - - - -︱
          Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear
            - - - - - - - - -
            - - - - - - - - -
            - - - - - - - - -
            Description :
            Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear


            The machine is in a well-maintained condition.

            Technical data of the machine will follow soon.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: Sprint42 | Sprint-42 | 42linear
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe DMG SPRINT 42 linear


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1624 · Turning Automatic Lathe - swiss lathe

          DMG - SPRINT 42 linear - - 2005 -

          Technical details
          - - - - - - - - -︱- - - - - - - - -︱- - - - - - - - -︱
          Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear
            - - - - - - - - -
            - - - - - - - - -
            - - - - - - - - -
            Description :
            Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear


            The machine is in a well-maintained condition.

            Technical data of the machine will follow soon.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: Sprint42 | Sprint-42 | 42linear
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine EMAG VL2


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1644 · Vertical Turning Machine

          EMAG - VL2 - - 2014 -

          Technical details
          max. turning diameter 160 mm︱max. turning height 150 mm︱max. workpiece diameter 100 mm︱max. workpiece height 150 mm︱max. turning speeds 6.000 U/min︱travel -x axis 700 mm︱travel -z axis 375 mm︱c-axis 360 °︱
          Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2
            max. turning diameter 160 mm
            max. turning height 150 mm
            max. workpiece diameter 100 mm
            max. workpiece height 150 mm
            max. turning speeds 6.000 U/min
            travel -x axis 700 mm
            travel -z axis 375 mm
            c-axis 360 °
            Description :
            Vertical Turning Machine | EMAG - VL2


            equipped with a workpiece conveyor belt.


            The machine is in very good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL-2 | VL 2
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VL2


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1646 · Vertical Turning Machine

          EMAG - VL2 - - 2014 -

          Technical details
          max. turning diameter 160 mm︱max. turning height 150 mm︱max. workpiece diameter 100 mm︱max. workpiece height 150 mm︱max. turning speeds 6.000 U/min︱travel -x axis 700 mm︱travel -z axis 375 mm︱c-axis 360 °︱
          Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2
            max. turning diameter 160 mm
            max. turning height 150 mm
            max. workpiece diameter 100 mm
            max. workpiece height 150 mm
            max. turning speeds 6.000 U/min
            travel -x axis 700 mm
            travel -z axis 375 mm
            c-axis 360 °
            Description :
            Vertical Turning Machine | EMAG - VL2


            equipped with a workpiece conveyor belt.


            The machine is in very good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL-2 | VL 2
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VTC 250 DUO DD


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1411 · Vertical Turning Machine

          EMAG - VTC 250 DUO DD - - 2007 - Siemens 840-D

          Technical details
          control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱
          Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
            control Siemens 840-D
            tool taper HSK & VDI 40
            - - - - - - - - -
            Description :
            Vertical Turning Machine EMAG - VTC 250 DUO DD with
            ITC (7-30 bar) and driven tools

            Additional equipment:

            - Workpiece grippers on all 3 turrets
            - 12-position disc turret for driven tools and VDI 40 tool holders,
            - 12-station disc turret with cross-slot and VDI 40 tool holders,
            - 12-station disc turret for driven tools and VDI 40 tool holders,
            - NC steady rest, self-centering,
            - headstock below,
            - tailstock below,

            - chip conveyor
            - Knoll unit 1.500 l,

            - OP10: Three-jaw chuck Rhöm KFD-N 220/3,
            - OP20: Hainbuch Spanntop pull-back BZI65,
            - Live tool for axial and radial machining,
            - Tool holder with Capto 5 quick change system,
            - Artis as tool and process monitoring,


            The machine is in a well-maintained condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VTC 250 DUO ED


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1410 · Vertical Turning Machine

          EMAG - VTC 250 DUO ED - - 2005 - Siemens 840-D

          Technical details
          control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱
          Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
            control Siemens 840-D
            tool taper HSK & VDI 40
            - - - - - - - - -
            Description :
            Vertical Turning Machine | EMAG - VTC 250 DUO ED
            with ITC (7-30 bar) and driven tools


            Additional equipment:

            - Workpiece grippers on all 3 turrets,
            - 6-station end-processing turret with HSK tool holder,
            - 12-station disc turret for driven tools and VDI 40 tool holder,
            - 12-position disc revolver with cross slot and VDI 40 tool holder,
            - NC - clamping head,
            - NC bezel, self-centering,
            - EMAG hydraulic double-piston clamping cylinder,
            - tailstock down,
            - Hydraulic double-piston clamping cylinder at the top,
            - chip conveyor,

            - Knoll plant 1.500 l,
            - Coolant supply 7-30 bar,

            - OP20: shaft chuck with retractable jaws and face drivers,
            - Tool holder with Capto 5,
            - Artis quick-change system for tool and process monitoring,
            - Tool pack is included,


            The machine is in a well-maintained condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
          Datasheet
          Request / Contact
          used  Vertical Turning Machine INDEX V100


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1647 · Vertical Turning Machine

          INDEX - V100 - - 2001 -

          Technical details
          max. turning speeds 10.000 U/min.︱chucking diameter 130 mm︱spindle diameter in front bearing 70 mm︱numbers of positions in the tool changer 12 ︱toolpiece turning speed range 6.000 U/min︱
          Vertical Turning Machine | INDEX - V100 Equipment: - coolant device, - integr. Chip conveyor: Knoll - 320S-1/160 (year 2001) - all-round workpiece carrier system: Schnaithmann (built in 2000) - all-round buffer belt, - Control cabinet, with cooling unit: Rittal The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-100 | V 100
            max. turning speeds 10.000 U/min.
            chucking diameter 130 mm
            spindle diameter in front bearin. 70 mm
            numbers of positions in the tool. 12
            toolpiece turning speed range 6.000 U/min
            Description :
            Vertical Turning Machine | INDEX - V100


            Equipment:
            - coolant device,
            - integr. Chip conveyor: Knoll - 320S-1/160 (year 2001)
            - all-round workpiece carrier system: Schnaithmann (built in 2000)
            - all-round buffer belt,
            - Control cabinet, with cooling unit: Rittal


            The machine is in very good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: V-100 | V 100
          Datasheet
          Request / Contact
          used  Vertical Turning Machine INDEX V100


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1648 · Vertical Turning Machine

          INDEX - V100 - - 2001 -

          Technical details
          max. turning speeds 10.000 U/min.︱chucking diameter 130 mm︱spindle diameter in front bearing 70 mm︱numbers of positions in the tool changer 12 ︱toolpiece turning speed range 6.000 U/min︱
          Vertical Turning Machine | INDEX - V100 Equipment: - coolant device, - rotating workpiece transport system, - Chip filter: Knoll-320S-1 (built in 2001), - all-round buffer belt, - Control cabinet, with cooling unit: Rittal The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-100 | V 100
            max. turning speeds 10.000 U/min.
            chucking diameter 130 mm
            spindle diameter in front bearin. 70 mm
            numbers of positions in the tool. 12
            toolpiece turning speed range 6.000 U/min
            Description :
            Vertical Turning Machine | INDEX - V100


            Equipment:
            - coolant device,
            - rotating workpiece transport system,
            - Chip filter: Knoll-320S-1 (built in 2001),
            - all-round buffer belt,
            - Control cabinet, with cooling unit: Rittal


            The machine is in very good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: V-100 | V 100
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VSC 200


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1555 · Vertical Turning Machine

          EMAG - VSC 200 - - 1999 - Siemens

          Technical details
          turning diameter 260 mm︱turning length 200 mm︱control Siemens ︱spindle bore diameter 50 mm︱Dimensions (L x W x H) 3.160 x 1.200 x 2.650 mm︱machine weight ab. 6.000 kg︱
          Vertical lathe | EMAG - VSC 200 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC200 | VSC-200
            turning diameter 260 mm
            turning length 200 mm
            control Siemens
            spindle bore diameter 50 mm
            Dimensions (L x W x H) 3.160 x 1.200 x 2.650 mm
            machine weight ab. 6.000 kg
            Description :
            Vertical lathe | EMAG - VSC 200


            The machine is in a well-maintained condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VSC200 | VSC-200
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VSC 200 DUO


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1571 · Vertical Turning Machine

          EMAG - VSC 200 DUO - - 1999 - Siemens

          Technical details
          control Siemens ︱- - - - - - - - -︱- - - - - - - - -︱
          Vertical lathe | EMAG - VSC 200 DUO The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC200DUO | VSC200 DUO | VSC 200DUO | VSC-200 DUO
            control Siemens
            - - - - - - - - -
            - - - - - - - - -
            Description :
            Vertical lathe | EMAG - VSC 200 DUO


            The machine is in a well-maintained condition.

            Technical data of the machine will follow soon.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VSC200DUO | VSC200 DUO | VSC 200DUO | VSC-200 DUO
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Профиль трейдера: Steinhand GmbH

          Связаться с торговцем



            Стейнханд ГмбХ
           Ам Сталверк 15
            45527 - Хаттинген
            Германия
            +49 (0) 2324 / 977 26 - 01">+49 (0) 2324 / 977 26 - 01
            + 49 (0) 2324 / 977 26 - 99
            info@steinhand.de
            www.steinhand.de

          Профиль пользователя Trader

          ОЦЕНКА, НЕПРЕРЫВНЫЕ РЕШЕНИЯ И НАДЕЖНОСТЬ - ОСНОВА НАШЕЙ РАБОТЫ - ЧТО ТАКОЕ МЫ ПОЙДУЕМ!

          На протяжении многих лет мы приобрели большой опыт и компетентность в автосалонах. С нами у вас есть надежный партнер на вашей стороне, когда речь идет о подержанных машинах из металлообрабатывающей промышленности. Мы специализируемся на торговле токарными, фрезерными станками, расточными станками, прессами и целыми производственными линиями. Наши клиенты возлагают большие надежды, на которые мы вправе жить.

          Вы хотели бы наблюдать за нашими машинами под властью?

          Вы не хотите иметь дело с неуместными обстоятельствами?

          Вы настаиваете на профессиональном послепродажном обслуживании?


          Наша компания гарантирует всесторонний беззаботный процесс транзакций. Мы будем профессионально советовать и помогать вам со словом и делами в течение всего проекта. Наши ноу-хау охватывают широкий спектр услуг, начиная от сделки финансирование хоть логистика до разборки или ввода в эксплуатацию машины на вашем производственном участке. Мы являемся сильным партнером, независимо от того, идет ли речь о покупке или продаже!
             

          Мы выступаем за надежную подержанную технику по справедливым ценам и глобально удовлетворенным клиентам.

          Не стесняйтесь обращаться к нам. Мы будем рады работать с вами!

          STEINHAND GMBH
          Адрес:
          Wiehagen 10, D-45472 Muelheim ad Ruhr
          Телефон: + 49 (0) 208 / 782 39-760
          Факс: + 49 (0) 208 / 78239-685
          Электронная почта: info@steinhand.de
          Веб-сайт: https://www.steinhand.de




          Steinhand GmbH   45527 - Hattingen Am Stahlwerk 15 Deutschland
          Steinhand GmbH

          Am Stahlwerk 15



          Contact Trader


            Steinhand GmbH
           Am Stahlwerk 15
            45527 - Hattingen
            Deutschland
            +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
            info@steinhand.de
            www.steinhand.de
            Contact person:

           




          Machine category


          Bandsäge · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Horizontal · CNC Dreh- und Fräszentrum · CNC Dreh- und Schleifzentrum - vertikal · Drehmaschine - zyklengesteuert · Entgratmaschine · Fahrständerfräsmaschine · Feinschleifmaschine · Flachschleifmaschine · Fräsmaschine - Vertikal · Gabelstapler - Diesel · Kopfdrehbank · Kurbelwellenschleifmaschine · Kurvendrehautomat · Langdrehautomat · Portal - Bearbeitungszentrum · Rundschleifmaschine - Außen · Rundtisch · Spitzenlose - Rundschleifmaschine · Tieflochbohrmaschine · Vertikaldrehmaschine · Werkzeugschleifmaschine · Zahnrad-Abwälzfräsmaschine - horizontal ·