Европейская сеть дилеров складской техники

Категория:
    Производитель:
      Машины:
        Трейдер:

          Emuk Maschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe H & H Hanseat 480


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2164 · Center Lathe

          H & H - Hanseat 480 - - 1976 -

          Technical details
          turning diameter over bed 480 mm︱turning diameter over slide rest 295 mm︱turning length 1000 mm︱turning speeds 19 - 2000 U/min︱metric threading 0,25 - 112 ︱Whitworth-thread 1/4 - 108 ︱module 0,125 - 28 ︱centre height 240 mm︱spindle bore 56 mm︱total power requirement 9,5 kW︱weight of the machine ca. 1,9 t︱dimensions of the machine ca. 2,4 x 1,0 x 1,6 m︱
          Heidenhain digital display.
            turning diameter over bed 480 mm
            turning diameter over slide rest 295 mm
            turning length 1000 mm
            turning speeds 19 - 2000 U/min
            metric threading 0,25 - 112
            Whitworth-thread 1/4 - 108
            module 0,125 - 28
            centre height 240 mm
            spindle bore 56 mm
            total power requirement 9,5 kW
            weight of the machine ca. 1,9 t
            dimensions of the machine ca. 2,4 x 1,0 x 1,6 m
            Description :
            Heidenhain digital display.
          Datasheet
          Request / Contact
          used  Center Lathe REIDEN R 200 - 2


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2055 · Center Lathe

          REIDEN - R 200 - 2 - - 1972 -

          Technical details
          turning diameter over bed 470 mm︱turning diameter over slide rest 250 mm︱turning length 1000 mm︱turning speeds 36 - 1780 U/min︱total power requirement 4,2 kW︱weight of the machine ca. 1,7 t︱dimensions of the machine ca. 2,2 x 0,9 x 1,6 m︱
          Heidenhain digital readout.
            turning diameter over bed 470 mm
            turning diameter over slide rest 250 mm
            turning length 1000 mm
            turning speeds 36 - 1780 U/min
            total power requirement 4,2 kW
            weight of the machine ca. 1,7 t
            dimensions of the machine ca. 2,2 x 0,9 x 1,6 m
            Description :
            Heidenhain digital readout.
          Datasheet
          Request / Contact
          used  Center Lathe H & H 21 RO


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2132 · Center Lathe

          H & H - 21 RO - - -

          Technical details
          turning diameter over bed 440 mm︱turning diameter over slide rest 300 mm︱turning length 600 mm︱centre height 220 mm︱turning speeds 40 - 1800 U/min︱tool taper Mulktifix B ︱total power requirement 3,5 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,4 x 1,0 x 1,5 m︱
            turning diameter over bed 440 mm
            turning diameter over slide rest 300 mm
            turning length 600 mm
            centre height 220 mm
            turning speeds 40 - 1800 U/min
            tool taper Mulktifix B
            total power requirement 3,5 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,4 x 1,0 x 1,5 m
            Description :

          Datasheet
          Request / Contact
          used  Center Lathe COLCHESTER Mascot 1600


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2108 · Center Lathe

          COLCHESTER - Mascot 1600 - - -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 360 mm︱turning length 1500 mm︱centre height 250 mm︱spindle bore 75 mm︱turning speeds 70 - 1600 U/min︱total power requirement kW︱weight of the machine ca. 3,0 t︱dimensions of the machine ca. 2,5 x 1,2 x 1,7 m︱
            turning diameter over bed 500 mm
            turning diameter over slide rest 360 mm
            turning length 1500 mm
            centre height 250 mm
            spindle bore 75 mm
            turning speeds 70 - 1600 U/min
            weight of the machine ca. 3,0 t
            dimensions of the machine ca. 2,5 x 1,2 x 1,7 m
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe VOEST-ALPINE-STEINEL W 570/ E 50 / 2


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2031 · CNC Lathe

          VOEST-ALPINE-STEINEL - W 570/ E 50 / 2 - - 1991 - 805

          Technical details
          turning diameter 570 mm︱turning length 2000 mm︱control 805 ︱spindle bore 66 mm︱greates pass round over bed 340 mm︱turning speeds 1 - 2500 U/min︱centre height 280 mm︱total power requirement 15 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 3,8 x 1,7 x 1,8 m︱
          2 lynets Roehm Duro T 250 3-jaw chuck Roehm 4-jaw chuck Lots of jaws and tool holders
            turning diameter 570 mm
            turning length 2000 mm
            control 805
            spindle bore 66 mm
            greates pass round over bed 340 mm
            turning speeds 1 - 2500 U/min
            centre height 280 mm
            total power requirement 15 kW
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 3,8 x 1,7 x 1,8 m
            Description :
            2 lynets
            Roehm Duro T 250 3-jaw chuck
            Roehm 4-jaw chuck
            Lots of jaws and tool holders
          16.800 €
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center WFL-VOEST-ALPINE STEINEL M 50 x 1600


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1830 · CNC Turning- and Milling Center

          WFL-VOEST-ALPINE STEINEL - M 50 x 1600 - - 1996 - Siemens 840 C

          Technical details
          turning diameter 450 mm︱turning length 1200 mm︱control Siemens 840 C ︱swing diameter 540 mm︱swing diameter over bed slide 450 mm︱spindle bore 77 mm︱spindle turning speed range 10 - 3150 U/min︱x-travel 380 mm︱y-travel 160 mm︱z-travel 2031 mm︱c-axis 0,001 ︱b-axis 180 °︱milling head speed 1 - 3000 U/min︱total power requirement kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. 6,3 x 3,3x 2,9 m︱
          * Tool changer with 24 tools * Internal spindle cooling * NC tailstock, quill diameter 100 mm * NC steady rest, SMW, SLU-4-ZS, clamping range 35-245 mm * Y axis * B axis * Chip conveyor * High pressure cooling with filtering * Power chuck, diameter 315 mm KNC * various tool holders
            turning diameter 450 mm
            turning length 1200 mm
            control Siemens 840 C
            swing diameter 540 mm
            swing diameter over bed slide 450 mm
            spindle bore 77 mm
            spindle turning speed range 10 - 3150 U/min
            x-travel 380 mm
            y-travel 160 mm
            z-travel 2031 mm
            c-axis 0,001
            b-axis 180 °
            milling head speed 1 - 3000 U/min
            weight of the machine ca. 10,5 t
            dimensions of the machine ca. 6,3 x 3,3x 2,9 m
            Description :
            * Tool changer with 24 tools
            * Internal spindle cooling
            * NC tailstock, quill diameter 100 mm
            * NC steady rest, SMW, SLU-4-ZS, clamping range 35-245 mm
            * Y axis
            * B axis
            * Chip conveyor
            * High pressure cooling with filtering
            * Power chuck, diameter 315 mm KNC
            * various tool holders
          Datasheet
          Request / Contact

          Vertical Turning a.Grinding m/c - Single

          used  Vertical Turning a.Grinding m/c - Single SCHIESS 16 DKE 140


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2075 · Vertical Turning a.Grinding m/c - Single

          SCHIESS - 16 DKE 140 - - 1971 -

          Technical details
          faceplate diameter 1400 mm︱swing diameter 1600 mm︱turning height 1220 mm︱max. boring depth in one step 700 mm︱turning speeds 3 - 250 U/min︱workpiece weight 10 t︱total power requirement 51 kW︱weight of the machine ca. 19,5 t︱dimensions of the machine ca. 6,0 x 3,8 x 4,3 m︱
          Wet turning/grinding device Left grinding device with pull-off device optical angular dragonfly Conical turning device Many accessories!
            faceplate diameter 1400 mm
            swing diameter 1600 mm
            turning height 1220 mm
            max. boring depth in one step 700 mm
            turning speeds 3 - 250 U/min
            workpiece weight 10 t
            total power requirement 51 kW
            weight of the machine ca. 19,5 t
            dimensions of the machine ca. 6,0 x 3,8 x 4,3 m
            Description :
            Wet turning/grinding device
            Left grinding device with pull-off device
            optical angular dragonfly
            Conical turning device
            Many accessories!
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine HESSAPP DVH 25/250


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1406 · Vertical Turning Machine

          HESSAPP - DVH 25/250 - - 1993 - Siemens Sinumerik 840 C

          Technical details
          turning diameter 250 mm︱swing diameter 250 mm︱turning height 350 mm︱control Siemens Sinumerik 840 C ︱spindle diameter in front bearing 100 mm︱feed range 0,1 - 20000 mm/min︱rapid traverse 20 m/min︱total power requirement 40 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱
          machine was adapted to centralized coolant system
            turning diameter 250 mm
            swing diameter 250 mm
            turning height 350 mm
            control Siemens Sinumerik 840 C
            spindle diameter in front bearin. 100 mm
            feed range 0,1 - 20000 mm/min
            rapid traverse 20 m/min
            total power requirement 40 kW
            weight of the machine ca. 8 t
            Description :
            machine was adapted to centralized coolant system
          Datasheet
          Request / Contact

          Deephole Boring Machine

          used  Deephole Boring Machine TBT T 30-250


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1934 · Deephole Boring Machine

          TBT - T 30-250 - - 1971 -

          Technical details
          bore depth 250 mm︱number of spindles 1 ︱core drilling diameter max. 1 - 30 mm︱total power requirement 20 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 3,2 x 2,8 x 2,0 m︱
          Many accessories.
            bore depth 250 mm
            number of spindles 1
            core drilling diameter max. 1 - 30 mm
            total power requirement 20 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 3,2 x 2,8 x 2,0 m
            Description :
            Many accessories.
          Datasheet
          Request / Contact

          High-Speed Radial Drilling Machine

          used  High-Speed Radial Drilling Machine HKS 40 F


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2032 · High-Speed Radial Drilling Machine

          HKS - 40 F - - 1990 -

          Technical details
          bore capacity in steel (diameter) 40 mm︱arm length 392 - 1117 mm︱workpiece height max. 330 - 750 mm︱spindle turning speed range 186 - 3150 U/min︱total power requirement 5 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,5 x 1,5 x 2,2 m︱
          Left / right rotation. Lots of accessories!
            bore capacity in steel (diameter. 40 mm
            arm length 392 - 1117 mm
            workpiece height max. 330 - 750 mm
            spindle turning speed range 186 - 3150 U/min
            total power requirement 5 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,5 x 1,5 x 2,2 m
            Description :
            Left / right rotation.
            Lots of accessories!
          Datasheet
          Request / Contact

          Upright Drilling Machine

          used  Upright Drilling Machine FLOTT SB 25


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2113 · Upright Drilling Machine

          FLOTT - SB 25 - - 1983 -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 260 mm︱bore stroke 120 mm︱turning speeds 125 - 2500 U/min︱total power requirement 1,5 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 0,4 x 0,4 x 1,7 m︱
            bore capacity in steel (diameter. 25 mm
            throat 260 mm
            bore stroke 120 mm
            turning speeds 125 - 2500 U/min
            total power requirement 1,5 kW
            weight of the machine ca. 0,3 t
            dimensions of the machine ca. 0,4 x 0,4 x 1,7 m
          Datasheet
          Request / Contact
          used  Upright Drilling Machine MAXION BS 50 RVST


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2078 · Upright Drilling Machine

          MAXION - BS 50 RVST - - -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 220 mm︱bore stroke 200 mm︱total power requirement kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 2,0 x 1,0 x 2,2 m︱
            bore capacity in steel (diameter. 50 mm
            throat 220 mm
            bore stroke 200 mm
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 2,0 x 1,0 x 2,2 m
          Datasheet
          Request / Contact
          used  Upright Drilling Machine Matheys unb.


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2053 · Upright Drilling Machine

          Matheys - unb. - - -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 0 - 400 mm︱bore stroke 140 mm︱table surface area 850 x 250 mm︱turning speeds 125 - 1480 U/min︱total power requirement kW︱weight of the machine ca. 2,2 t︱dimensions of the machine ca. 2,0 x 1,8 x 2,2 m︱
            bore capacity in steel (diameter. 40 mm
            throat 0 - 400 mm
            bore stroke 140 mm
            table surface area 850 x 250 mm
            turning speeds 125 - 1480 U/min
            weight of the machine ca. 2,2 t
            dimensions of the machine ca. 2,0 x 1,8 x 2,2 m
          Datasheet
          Request / Contact
          used  Upright Drilling Machine ALZMETALL AB 4 SJ


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2167 · Upright Drilling Machine

          ALZMETALL - AB 4 SJ - - -

          Technical details
          bore capacity in steel (diameter) 35 / 45 mm︱throat 330 mm︱bore stroke 200 mm︱morse taper MK 4 ︱table diameter 560 mm︱total power requirement 2,5 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 0,6 x 0,5 x 2,0 m︱
          Round table, height adjustable.
            bore capacity in steel (diameter. 35 / 45 mm
            throat 330 mm
            bore stroke 200 mm
            morse taper MK 4
            table diameter 560 mm
            total power requirement 2,5 kW
            weight of the machine ca. 0,8 t
            dimensions of the machine ca. 0,6 x 0,5 x 2,0 m
            Description :
            Round table, height adjustable.
          Datasheet
          Request / Contact
          used  Upright Drilling Machine REIBO unb.


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2052 · Upright Drilling Machine

          REIBO - unb. - - -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 200 mm︱bore stroke 220 mm︱table surface area 420 x 340 mm︱turning speeds 95 - 1050 U/min︱total power requirement kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,2 x 0,8 x 2,3 m︱
            bore capacity in steel (diameter. 32 mm
            throat 200 mm
            bore stroke 220 mm
            table surface area 420 x 340 mm
            turning speeds 95 - 1050 U/min
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,2 x 0,8 x 2,3 m
          Datasheet
          Request / Contact

          Universal Milling Machine

          used  Universal Milling Machine HURON MU 5


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2035 · Universal Milling Machine

          HURON - MU 5 - - 1991 - TNC 114 B

          Technical details
          x-travel 1300 mm︱y-travel 700 mm︱z-travel 550 mm︱table surface area 1635 x 460 mm︱control TNC 114 B ︱Tool bore ISA 50 ︱spindle turning speed range 30 - 2066 U/min︱total power requirement 11 kW︱weight of the machine ca. 3,9 t︱dimensions of the machine ca. 2,5 x 1,7 x 2,2 m︱
            x-travel 1300 mm
            y-travel 700 mm
            z-travel 550 mm
            table surface area 1635 x 460 mm
            control TNC 114 B
            Tool bore ISA 50
            spindle turning speed range 30 - 2066 U/min
            total power requirement 11 kW
            weight of the machine ca. 3,9 t
            dimensions of the machine ca. 2,5 x 1,7 x 2,2 m
          Datasheet
          Request / Contact

          Bevel Gear Shaping Machine

          used  Bevel Gear Shaping Machine H & H 60 HS 3


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2061 · Bevel Gear Shaping Machine

          H & H - 60 HS 3 - - -

          Technical details
          max. wheel diameter 25 / 600 mm︱gear width 0 -90 mm︱max. module 10 ︱min. module 1,5 ︱min/max. pitch cone angle 5 - 90 °︱tooth length 90 mm︱stroke 0 - 100 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6,1 t︱dimensions of the machine ca. 3,0 x 2,4 x 1,8 m︱
          Equipment: Change gears, planer knives, setting devices, clamping devices, ...
            max. wheel diameter 25 / 600 mm
            gear width 0 -90 mm
            max. module 10
            min. module 1,5
            min/max. pitch cone angle 5 - 90 °
            tooth length 90 mm
            stroke 0 - 100 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6,1 t
            dimensions of the machine ca. 3,0 x 2,4 x 1,8 m
            Description :
            Equipment:
            Change gears, planer knives, setting devices, clamping devices, ...
          Datasheet
          Request / Contact
          used  Bevel Gear Shaping Machine H & H 26 HS


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2059 · Bevel Gear Shaping Machine

          H & H - 26 HS - - -

          Technical details
          max. wheel diameter 265 mm︱gear width 0 - 50 mm︱max. module 6 ︱min. module 0,5 ︱tooth length 50 mm︱stroke 0 - 60 mm︱min/max. pitch cone angle 5 - 90 °︱total power requirement 5,1 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 2,8 x 2,0 x 1,7 m︱
          Equipment: Change gears, planer knives, setting devices, clamping devices, ...
            max. wheel diameter 265 mm
            gear width 0 - 50 mm
            max. module 6
            min. module 0,5
            tooth length 50 mm
            stroke 0 - 60 mm
            min/max. pitch cone angle 5 - 90 °
            total power requirement 5,1 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 2,8 x 2,0 x 1,7 m
            Description :
            Equipment:
            Change gears, planer knives, setting devices, clamping devices, ...
          Datasheet
          Request / Contact

          Bevel Gear Testing Machine

          used  Bevel Gear Testing Machine Geartec PSKE 900 HW


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2011 · Bevel Gear Testing Machine

          Geartec - PSKE 900 HW - - 2013 -

          Technical details
          max. wheel diameter 900 / 500 mm︱gear width 500 mm︱module 1 - 10 ︱spur gear - distance of shafts 20 - 520 mm︱workpiece weight 50 kg︱spindle bore 90 mm︱spindle turning speed - stepless 0 - 100 U/min︱total power requirement kW︱weight of the machine ca. 2,7 t︱dimensions of the machine ca. 2,0 x 2,4 x 1,9 m︱
          Single flank rolling tester, original Klingelnberg, 2013 retrofit by Geartec. TOP CONDITION!!! Measurement of bevel gears and spur gears: Single flank pitch deviation; Single flank pitch jump; Long-wave / short-wave Share of pitch deviation; Mean value of the single-flank rolling deviation; Max. Value of the single-flank rolling deviation; Backlash between input and Output shaft.
            max. wheel diameter 900 / 500 mm
            gear width 500 mm
            module 1 - 10
            spur gear - distance of shafts 20 - 520 mm
            workpiece weight 50 kg
            spindle bore 90 mm
            spindle turning speed - stepless 0 - 100 U/min
            weight of the machine ca. 2,7 t
            dimensions of the machine ca. 2,0 x 2,4 x 1,9 m
            Description :
            Single flank rolling tester, original Klingelnberg, 2013 retrofit by Geartec.
            TOP CONDITION!!!
            Measurement of bevel gears and spur gears:
            Single flank pitch deviation; Single flank pitch jump; Long-wave / short-wave
            Share of pitch deviation; Mean value of the single-flank rolling deviation;
            Max. Value of the single-flank rolling deviation; Backlash between input and
            Output shaft.
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Horizontal

          used  Gear Hobbing Machine - Horizontal BARBER COLMAN 16 - 16


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1929 · Gear Hobbing Machine - Horizontal

          BARBER COLMAN - 16 - 16 - - ca.1980 -

          Technical details
          max. wheel diameter 406 mm︱gear width 420 mm︱max. module 4,3 ︱min. module 0,5 ︱hob turning speeds 49 - 246 U/min︱table hole 80 mm︱total power requirement kW︱weight of the machine ca. 6,8 t︱dimensions of the machine ca. 2,8 x 1,6 x 2,2 m︱
          Many accesories!
            max. wheel diameter 406 mm
            gear width 420 mm
            max. module 4,3
            min. module 0,5
            hob turning speeds 49 - 246 U/min
            table hole 80 mm
            weight of the machine ca. 6,8 t
            dimensions of the machine ca. 2,8 x 1,6 x 2,2 m
            Description :
            Many accesories!
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Horizontal KOEPFER K 160


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1963 · Gear Hobbing Machine - Horizontal

          KOEPFER - K 160 - - 2005 - BWO CNC 920

          Technical details
          max. wheel diameter 60 mm︱gear width 200 mm︱max. module 2,5 ︱min. module 0,3 ︱Control BWO CNC 920 ︱workpiece length - max. 280 mm︱milling spindle speeds (infinitely variable) 500 - 5000 U/min︱tangential adjustment 160 mm︱speed of workpiece (milling) 1000 U/min︱total power requirement 20 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 3,0 x 2,0 x 2,0 m︱
          Solid loading unit.
            max. wheel diameter 60 mm
            gear width 200 mm
            max. module 2,5
            min. module 0,3
            Control BWO CNC 920
            workpiece length - max. 280 mm
            milling spindle speeds (infinite. 500 - 5000 U/min
            tangential adjustment 160 mm
            speed of workpiece (milling) 1000 U/min
            total power requirement 20 kW
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 3,0 x 2,0 x 2,0 m
            Description :
            Solid loading unit.
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Horizontal GLEASON- PFAUTER P 60


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1987 · Gear Hobbing Machine - Horizontal

          GLEASON- PFAUTER - P 60 - - 2001 - Siemens 840C

          Technical details
          max. wheel diameter 65 mm︱gear width 140 mm︱max. module 3 ︱control Siemens 840C ︱clamping length max. 320 mm︱pivoting angle +45 / -115 Grad︱x-travel 80 mm︱y-travel 100 mm︱z-travel 220 mm︱milling spindle speeds (infinitely variable) 300 - 5000 U/min︱workpiece spindle stepless 0 - 3000 U/min︱total power requirement 12 kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 3,3 x 3,3 x 2,1 m︱
          Machine equipped for dry milling. Tool breakage monitoring, deburring unit, loading / unloading system.
            max. wheel diameter 65 mm
            gear width 140 mm
            max. module 3
            control Siemens 840C
            clamping length max. 320 mm
            pivoting angle +45 / -115 Grad
            x-travel 80 mm
            y-travel 100 mm
            z-travel 220 mm
            milling spindle speeds (infinite. 300 - 5000 U/min
            workpiece spindle stepless 0 - 3000 U/min
            total power requirement 12 kW
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 3,3 x 3,3 x 2,1 m
            Description :
            Machine equipped for dry milling.
            Tool breakage monitoring, deburring unit, loading / unloading system.
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Horizontal KOEPFER 180 B SPS


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1994 · Gear Hobbing Machine - Horizontal

          KOEPFER - 180 B SPS - - 1996 -

          Technical details
          max. wheel diameter 50 / 120 mm︱gear width 170 mm︱max. module 2,5 ︱min. module 0,2 ︱Control ︱turning speeds 140 - 1400 U/min︱workpiece length - max. 300 mm︱milling slide swivelling 70 Grad︱total power requirement 5 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 2,0 x 1,5 x 2,2 m︱
          Machine with loading / unloading system.
            max. wheel diameter 50 / 120 mm
            gear width 170 mm
            max. module 2,5
            min. module 0,2
            turning speeds 140 - 1400 U/min
            workpiece length - max. 300 mm
            milling slide swivelling 70 Grad
            total power requirement 5 kW
            weight of the machine ca. 2,8 t
            dimensions of the machine ca. 2,0 x 1,5 x 2,2 m
            Description :
            Machine with loading / unloading system.
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Horizontal MIKRON A 25 CNC


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1925 · Gear Hobbing Machine - Horizontal

          MIKRON - A 25 CNC - - 1995 - Siemens 840 C

          Technical details
          max. wheel diameter 100 / 150 mm︱gear width 300 mm︱max. module 3 ︱min. module 0,3 ︱Control Siemens 840 C ︱hobbing length 200 mm︱milling spindle speeds (infinitely variable) 0 - 1500 U/min︱diameter of hob 40 - 90 mm︱x-travel 140 mm︱y-travel 200 mm︱z-travel 300 mm︱w-axis 388 mm︱swivel angle for work spindle +50 / -50 °︱speed of workpiece (milling) 0 - 350 U/min︱total power requirement 21 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3,6 x 2,9 x 2,8 m︱
          Loading unit.
            max. wheel diameter 100 / 150 mm
            gear width 300 mm
            max. module 3
            min. module 0,3
            Control Siemens 840 C
            hobbing length 200 mm
            milling spindle speeds (infinite. 0 - 1500 U/min
            diameter of hob 40 - 90 mm
            x-travel 140 mm
            y-travel 200 mm
            z-travel 300 mm
            w-axis 388 mm
            swivel angle for work spindle +50 / -50 °
            speed of workpiece (milling) 0 - 350 U/min
            total power requirement 21 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3,6 x 2,9 x 2,8 m
            Description :
            Loading unit.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

          Emuk Maschinenhandel GmbH   76316 Malsch Siemensstrasse 24 Deutschland
          Emuk Maschinenhandel GmbH

          Siemensstrasse 24



          Contact Trader


            Emuk Maschinenhandel GmbH
           Siemensstrasse 24
            76316 Malsch
            Deutschland
            +49 (0) 7246 943161
           
            info@emuk.info
            www.emuk.info
            Contact person:

           




          Machine category


          Absauganlage · Absaugung · Bandsäge - Automatisch · Bandsäge - Vertikal · Bügelsäge - Automatisch · Bügelsägeautomat · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Doppelschleifbock · Elektro - Hubwagen · Filteranlage · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Gewinde-Schnecken-Schleifmaschine · Kantenschleifmaschine · Karusselldreh- und Schleifma.-Einständer · Kegelrad-Prüfmaschine · Kegelradhobelmaschine · Kehrmaschine · Keilnutenziehmaschine · Kreissägenschärfmaschine · Kühlmittelanlage · Langgewinde- und Abwälzfräsmaschine · Leit- und Zugspindeldrehmaschine · Messerschleifmaschine · Nuten-Stossmaschine · Nutenziehmaschine · Profilprojektor · Richtpresse - Einständer · Rundlaufprüfgerät · Rundschleifmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtischflachschleifmaschine - Vertikal · Rundtischflächenschleifmaschine - Horiz. · Schabrad-Schärfmaschine · Schleifscheibenprofiliergerät · Schneidradschärfmaschine · Schnellradiale - Bohrmaschine · Schärfmaschine · Stoßmaschine - Vertikal · Ständerbohrmaschine · Sägeblattschärfmaschine · Tieflochbohrmaschine · Topfschleifmaschine · Vertikaldrehmaschine · Werkstattpressen - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine · Werkzeugschleifmaschine - Universal · Wälzfräserschärfmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradhobelmaschine · Zahnradprüfmaschine · Zahnradstossmaschine · Zahnstangenstossmaschine · Zentrumschleifmaschine ·