Европейская сеть дилеров складской техники

Категория:
    Производитель:
      Машины:
        Трейдер:

          Frech GmbH - Stockist for used machines

          Machinelist:


          Decoiler - Double

          used  Decoiler - Double AMT HDR 2,0/1500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7746 · Decoiler - Double

          AMT - HDR 2,0/1500 - - 2011 -

          Technical details
          sheet width 0300 - 500 mm︱coil weight 2 x 2,00 t︱coil internal dia. 470 - 530 mm︱coil outside - diam. ca. 1500 mm︱0 2 - 30 U/min︱total power requirement 2 x 1,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Manual spreading via handwheel - 12 bundle arms - Drive with three-phase gear motor (brake motor) LENZE - Loop control via proximity switch with time relay for on / off - Switch cabinet - Speed is set via potentiometer, with LENZE frequency converter
            sheet width 0300 - 500 mm
            coil weight 2 x 2,00 t
            coil internal dia. 470 - 530 mm
            coil outside - diam. ca. 1500 mm
            0 2 - 30 U/min
            total power requirement 2 x 1,5 kW
            Description :
            - Manual spreading via handwheel
            - 12 bundle arms
            - Drive with three-phase gear motor (brake motor) LENZE
            - Loop control via proximity switch with time relay for on / off
            - Switch cabinet
            - Speed is set via potentiometer, with LENZE frequency converter
          Datasheet
          Request / Contact

          Decoilers for Coils

          used  Decoilers for Coils UNGERER


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7262 · Decoilers for Coils

          UNGERER - - - 1993 -

          Technical details
          sheet width - max. 1800 mm︱coil weight 10,00 t︱coil internal dia. 508 mm︱coil external diameter 1800 mm︱working direction left - right ja / yes ︱range of expansion ca. 475 - 515 mm︱sheet thickness with Stahl / steel 4 mm︱sheet thickness with Aluminium 5 - 6 mm︱total power requirement kW︱weight of the machine ca. 9,0 t︱dimensions of the machine ca. 3,70 x 1,80 x 1,80 m︱
          Hydraulic snubber roll arm with hydraulic motor. Shifting movement for coil alignement +- 125 mm electric-hydraulic valves on board. Main Motor: It is installed a DC motor of power 10 kW plus gearbox ratio=1:25 + chain transmission ratio 1:2. Different motor and gearbox can be supplied according to the customer’s line speed. The decoiler is in excellent conditions and we have already checked the mandrel bearings. The snubber roll is new (polyurethane).
            sheet width - max. 1800 mm
            coil weight 10,00 t
            coil internal dia. 508 mm
            coil external diameter 1800 mm
            working direction left - right ja / yes
            range of expansion ca. 475 - 515 mm
            sheet thickness with Stahl / steel 4 mm
            sheet thickness with Aluminium 5 - 6 mm
            weight of the machine ca. 9,0 t
            dimensions of the machine ca. 3,70 x 1,80 x 1,80 m
            Description :
            Hydraulic snubber roll arm with hydraulic motor.
            Shifting movement for coil alignement +- 125 mm
            electric-hydraulic valves on board.

            Main Motor:
            It is installed a DC motor of power 10 kW plus gearbox ratio=1:25 + chain
            transmission ratio 1:2.
            Different motor and gearbox can be supplied according to the customer’s line
            speed.

            The decoiler is in excellent conditions and we have already checked
            the mandrel
            bearings. The snubber roll is new (polyurethane).

          Datasheet
          Request / Contact

          Folding Machine

          used  Folding Machine FASTI SCHROEDER 216 32-16


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76291 · Folding Machine

          FASTI SCHROEDER - 216 32-16 - - 2011 -

          Technical details
          sheet width 3200 mm︱plate thickness 16,00 mm︱distance between columns mm︱upper beam stroke 500 mm︱bending beam adjustment 60 mm︱total power requirement kW︱weight of the machine ca. 20,00 t︱dimensions of the machine ca. 6,00 x 2,50 x 3,00 m︱
          ONLY 6800 OPERATING HOURS Furnishing - Motorized folding beam adjustment - Hydraulic upper tool clamping - CNC controlled crowning - CFP 120 touch screen control - Motor, rear stop 10-1500mm - Pointed rail 45 ° sharp Pointed rail 45 ° R10 - bending rail - Goat foot tool approx.R10 - documentation
            sheet width 3200 mm
            plate thickness 16,00 mm
            upper beam stroke 500 mm
            bending beam adjustment 60 mm
            weight of the machine ca. 20,00 t
            dimensions of the machine ca. 6,00 x 2,50 x 3,00 m
            Description :
            ONLY 6800 OPERATING HOURS

            Furnishing
            - Motorized folding beam adjustment
            - Hydraulic upper tool clamping
            - CNC controlled crowning
            - CFP 120 touch screen control
            - Motor, rear stop 10-1500mm
            - Pointed rail 45 ° sharp Pointed rail 45 ° R10
            - bending rail
            - Goat foot tool approx.R10
            - documentation


          Datasheet
          Request / Contact
          used  Folding Machine SCHRÖDER MAK 4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76329 · Folding Machine

          SCHRÖDER - MAK 4 - - 2003 -

          Technical details
          sheet width 4020 mm︱plate thickness 4,00 mm︱distance between columns mm︱upper beam stroke 350 mm︱total power requirement kW︱weight of the machine ca. 7,00 t︱dimensions of the machine ca. 6,00 x 2,00 x 2,20 m︱
          • Positioning control POS 500-2 (12-fold program with LCD display) • Goat foot set H170mm divided • Bending bar 20mm (built-in + 2 x 2000mm extra) • Sharp rail 45 ° (2 x 2000mm) • Folding rail 2 x 2000mm • Motorized folding beam adjustment • Sheet metal support table with manual back gauge 10-1000mm and digital display
            sheet width 4020 mm
            plate thickness 4,00 mm
            upper beam stroke 350 mm
            weight of the machine ca. 7,00 t
            dimensions of the machine ca. 6,00 x 2,00 x 2,20 m
            Description :
            • Positioning control POS 500-2 (12-fold program with LCD display)
            • Goat foot set H170mm divided
            • Bending bar 20mm (built-in + 2 x 2000mm extra)
            • Sharp rail 45 ° (2 x 2000mm)
            • Folding rail 2 x 2000mm
            • Motorized folding beam adjustment
            • Sheet metal support table with manual back gauge 10-1000mm and digital display
          Datasheet
          Request / Contact
          used  Folding Machine SCHRÖDER ASK II


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76337 · Folding Machine

          SCHRÖDER - ASK II - - 1999 -

          Technical details
          sheet width 1000 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,500 t︱dimensions of the machine ca. m︱
          Manual folding machine with segmented upper beam rail
            sheet width 1000 mm
            plate thickness 2,00 mm
            weight of the machine ca. 0,500 t
            Description :
            Manual folding machine with segmented upper beam rail
          Datasheet
          Request / Contact
          used  Folding Machine FASTI 212-32-4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76330 · Folding Machine

          FASTI - 212-32-4 - - 1996 -

          Technical details
          sheet width 3240 mm︱plate thickness 4,00 mm︱distance between columns mm︱stroke 350 mm︱total power requirement kW︱weight of the machine ca. 6,30 t︱dimensions of the machine ca. 4,55 x 2,60 x 2,20 m︱
          - Goat foot set divided height 130mm - controlled backgauge with ball transfer units 1000mm (1500mm with repositioning) - Operation manual - FM 100 control - Sharp rail 45 ° - 2 pcs. Bending bars a width of 18mm - 1 pc. Reinforcement rail 35mm wide
            sheet width 3240 mm
            plate thickness 4,00 mm
            stroke 350 mm
            weight of the machine ca. 6,30 t
            dimensions of the machine ca. 4,55 x 2,60 x 2,20 m
            Description :
            - Goat foot set divided height 130mm
            - controlled backgauge with ball transfer units 1000mm (1500mm with
            repositioning)
            - Operation manual
            - FM 100 control
            - Sharp rail 45 °
            - 2 pcs. Bending bars a width of 18mm
            - 1 pc. Reinforcement rail 35mm wide
          Datasheet
          Request / Contact
          used  Folding Machine RAS 74.30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76338 · Folding Machine

          RAS - 74.30 - - 1994 -

          Technical details
          sheet width 3200 mm︱plate thickness 4,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 5,80 t︱dimensions of the machine ca. m︱
          - Motorized backgauge with folding cams up to 1500 mm - Motorized folding beam adjustment - Multibend 9000 control - Segmented upper beam tool with automatic Tool clamp (height 150mm)
            sheet width 3200 mm
            plate thickness 4,00 mm
            weight of the machine ca. 5,80 t
            Description :
            - Motorized backgauge with folding cams up to 1500 mm
            - Motorized folding beam adjustment
            - Multibend 9000 control
            - Segmented upper beam tool with automatic
            Tool clamp (height 150mm)
          Datasheet
          Request / Contact
          used  Folding Machine HERA UM III


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76347 · Folding Machine

          HERA - UM III - - 1987 -

          Technical details
          sheet width 3000 mm︱plate thickness 4,00 mm︱distance between columns mm︱upper beam stroke 350 mm︱total power requirement kW︱weight of the machine ca. 4,00 t︱dimensions of the machine ca. 4,00 x 1,30 x 1,70 m︱
          Bending angle adjustment via POTI
            sheet width 3000 mm
            plate thickness 4,00 mm
            upper beam stroke 350 mm
            weight of the machine ca. 4,00 t
            dimensions of the machine ca. 4,00 x 1,30 x 1,70 m
            Description :
            Bending angle adjustment via POTI
          Datasheet
          Request / Contact
          used  Folding Machine RAS 67.40


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76143 · Folding Machine

          RAS - 67.40 - - -

          Technical details
          sheet width 4060 mm︱plate thickness 1,50 mm︱distance between columns mm︱total power requirement 3 kW︱weight of the machine ca. 4,60 t︱dimensions of the machine ca. 5,00 x 1,20 x 1,50 m︱
          - automatic and manual mode possible - Bending angle adjustable via potentiometer - Rail for bends up to 160 °
            sheet width 4060 mm
            plate thickness 1,50 mm
            total power requirement 3 kW
            weight of the machine ca. 4,60 t
            dimensions of the machine ca. 5,00 x 1,20 x 1,50 m
            Description :
            - automatic and manual mode possible
            - Bending angle adjustable via potentiometer
            - Rail for bends up to 160 °
          Datasheet
          Request / Contact
          used  Folding Machine FASTI 206-12-3


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76345 · Folding Machine

          FASTI - 206-12-3 - - -

          Technical details
          sheet width 1270 mm︱plate thickness 3,00 mm︱distance between columns mm︱upper beam stroke 200 mm︱total power requirement kW︱weight of the machine ca. 1,10 t︱dimensions of the machine ca. m︱
          Bending rail ground
            sheet width 1270 mm
            plate thickness 3,00 mm
            upper beam stroke 200 mm
            weight of the machine ca. 1,10 t
            Description :
            Bending rail ground
          Datasheet
          Request / Contact
          used  Folding Machine FASTI 206-12-2,5


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76344 · Folding Machine

          FASTI - 206-12-2,5 - - -

          Technical details
          sheet width 1270 mm︱plate thickness 2,50 mm︱distance between columns mm︱upper beam stroke 200 mm︱total power requirement kW︱weight of the machine ca. 1,10 t︱dimensions of the machine ca. m︱
          Bending rail ground
            sheet width 1270 mm
            plate thickness 2,50 mm
            upper beam stroke 200 mm
            weight of the machine ca. 1,10 t
            Description :
            Bending rail ground
          Datasheet
          Request / Contact
          used  Folding Machine FASTI 212-20-4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76339 · Folding Machine

          FASTI - 212-20-4 - - -

          Technical details
          sheet width 2040 mm︱plate thickness 4,00 mm︱distance between columns mm︱upper beam stroke 350 mm︱total power requirement kW︱weight of the machine ca. 4,00 t︱dimensions of the machine ca. m︱
          - Manual and automatic bending process possible - Bending angle adjustable via potentiometer - Lifting height of the upper beam and material thickness can be pre-selectedusing a dip switch - Bending rail ground - Operation manual Further bending rails and backgauge on request
            sheet width 2040 mm
            plate thickness 4,00 mm
            upper beam stroke 350 mm
            weight of the machine ca. 4,00 t
            Description :
            - Manual and automatic bending process possible
            - Bending angle adjustable via potentiometer
            - Lifting height of the upper beam and material thickness can be
            pre-selectedusing a dip switch
            - Bending rail ground
            - Operation manual
            Further bending rails and backgauge on request
          Datasheet
          Request / Contact
          used  Folding Machine FASTI 215-32-4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76322 · Folding Machine

          FASTI - 215-32-4 - - -

          Technical details
          sheet width 3240 mm︱plate thickness 4,00 mm︱distance between columns mm︱upper beam stroke 320 mm︱stroke bending beam 80 mm︱total power requirement kW︱weight of the machine ca. 7,50 t︱dimensions of the machine ca. 4,55 x 2,80 x 2,30 m︱
          Furnishing: - Motorized folding beam adjustment - FASTIMATIK 4000 CNC control - controlled backgauge 1000 mm - documentation - Tool package: Sharp rail 45 ° (built-in) Bending bar: 18mm, 35mm (built-in) Goat foot height 150mm approx.R10 Goat foot height 130mm approx. R1.5
            sheet width 3240 mm
            plate thickness 4,00 mm
            upper beam stroke 320 mm
            stroke bending beam 80 mm
            weight of the machine ca. 7,50 t
            dimensions of the machine ca. 4,55 x 2,80 x 2,30 m
            Description :
            Furnishing:
            - Motorized folding beam adjustment
            - FASTIMATIK 4000 CNC control
            - controlled backgauge 1000 mm
            - documentation
            - Tool package:
            Sharp rail 45 ° (built-in)
            Bending bar: 18mm, 35mm (built-in)
            Goat foot height 150mm approx.R10
            Goat foot height 130mm approx. R1.5
          Datasheet
          Request / Contact

          Hydr. pressbrake

          used  Hydr. pressbrake BOSCHERT GFlex 3140


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96648 · Hydr. pressbrake

          BOSCHERT - GFlex 3140 - - 2019 -

          Technical details
          pressure 140 t︱chamfer lenght 3100 mm︱distance between columns 2555 mm︱throat 400 mm︱stroke 250 mm︱dayligth 515 mm︱total power requirement 15 kW︱weight of the machine ca. 11,00 t︱dimensions of the machine ca. 4,00 x 1,80 x 2,70 m︱
          Furnishing: • FIESSLER AKAS light barrier • 2 pieces of support arms can be moved on linear guides • CNC controlled crowning • Controlled axes: Y1, Y2, X, R • Control Cybelec Cybtouch 12 • Shared stamp • Split block die
            pressure 140 t
            chamfer lenght 3100 mm
            distance between columns 2555 mm
            throat 400 mm
            stroke 250 mm
            dayligth 515 mm
            total power requirement 15 kW
            weight of the machine ca. 11,00 t
            dimensions of the machine ca. 4,00 x 1,80 x 2,70 m
            Description :
            Furnishing:
            • FIESSLER AKAS light barrier
            • 2 pieces of support arms can be moved on linear guides
            • CNC controlled crowning
            • Controlled axes: Y1, Y2, X, R
            • Control Cybelec Cybtouch 12
            • Shared stamp
            • Split block die
          Datasheet
          Request / Contact
          used  Hydr. pressbrake BYSTRONIC XPERT 250/3100


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96689 · Hydr. pressbrake

          BYSTRONIC - XPERT 250/3100 - - 2014 -

          Technical details
          pressure 250 t︱chamfer lenght 3100 mm︱distance between columns 2750 mm︱dayligth 750 mm︱throat 400 mm︱stroke 465 mm︱Y-Rapid speed 190 mm/s (Rückzug 150 mm/sec.︱Control ︱total power requirement 22 kW︱weight of the machine ca. 19 t︱dimensions of the machine ca. 4,10 x 2,10 x 3,58 m︱
          - Stroke only 465 mm - Strokes: 146,520, operating hours: 15,743h (read) Furnishing • Controlled axes: Y1, Y2, X, R, Z1, Z2 • CNC controlled crowning • PILZ light barrier • Network compatible + USB connection • LED work area lighting • Operating manual • Control: MMC ByBend • movable support arms • CNC crowning • Electrical tool overload protection • Hydraulic upper tool clamping • Tool system: RF-A • Including machine software Bysoft + Bybendpart Designer and Unfolder • Including inspection book 2012 to 2020 annual maintenance carried out • 1 tool set above, as shown in the picture, height 250mm R1 3000mm • 1 die set, V10 / 30 °, 3000mm Large tool package with upper tool and lower tool included
            pressure 250 t
            chamfer lenght 3100 mm
            distance between columns 2750 mm
            dayligth 750 mm
            throat 400 mm
            stroke 465 mm
            Y-Rapid speed 190 mm/s (Rückzug 150 mm/sec.
            total power requirement 22 kW
            weight of the machine ca. 19 t
            dimensions of the machine ca. 4,10 x 2,10 x 3,58 m
            Description :
            - Stroke only 465 mm
            - Strokes: 146,520, operating hours: 15,743h (read)

            Furnishing
            • Controlled axes: Y1, Y2, X, R, Z1, Z2
            • CNC controlled crowning
            • PILZ light barrier
            • Network compatible + USB connection
            • LED work area lighting
            • Operating manual
            • Control: MMC ByBend
            • movable support arms
            • CNC crowning
            • Electrical tool overload protection
            • Hydraulic upper tool clamping
            • Tool system: RF-A
            • Including machine software Bysoft + Bybendpart Designer and Unfolder
            • Including inspection book 2012 to 2020 annual maintenance carried out
            • 1 tool set above, as shown in the picture, height 250mm R1 3000mm
            • 1 die set, V10 / 30 °, 3000mm

            Large tool package with upper tool and lower tool included
          Datasheet
          Request / Contact
          used  Hydr. pressbrake ATLANTIC HPT 100/25


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96690 · Hydr. pressbrake

          ATLANTIC - HPT 100/25 - - 2007 -

          Technical details
          pressure 100 t︱chamfer lenght 2600 mm︱distance between columns 2100 mm︱Control ︱total power requirement 5,6 kW︱weight of the machine ca. 6,90 t︱dimensions of the machine ca. 2,95 x 2,00 x 2,30 m︱
          Furnishing: • Manual crowning • Controlled axes: X, Y1, Y2 • 2 stop fingers can be moved • Block die with: V10, V16 30 °, V30 85 °, V32, V55 • Cranked punch
            pressure 100 t
            chamfer lenght 2600 mm
            distance between columns 2100 mm
            total power requirement 5,6 kW
            weight of the machine ca. 6,90 t
            dimensions of the machine ca. 2,95 x 2,00 x 2,30 m
            Description :
            Furnishing:
            • Manual crowning
            • Controlled axes: X, Y1, Y2
            • 2 stop fingers can be moved
            • Block die with: V10, V16 30 °, V30 85 °, V32, V55
            • Cranked punch
          Datasheet
          Request / Contact
          used  Hydr. pressbrake LVD PPEB 80 to x 1500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96688 · Hydr. pressbrake

          LVD - PPEB 80 to x 1500 - - 2005 -

          Technical details
          pressure 080 t︱chamfer lenght 1500 mm︱distance between columns 1050 mm︱dayligth 400 mm︱stroke 200 mm︱throat 405 mm︱Control ︱total power requirement 7,50 kW︱weight of the machine ca. 4,9 t︱dimensions of the machine ca. 2,355 x 1,80 x 2,70 m︱
          - Mechanical tool clamping Wila above + below - CNC axes: Y1, Y2, X, R, Z1, Z2, - Front safety light barrier - CNC control: CADMAN - Easyform bending angle measuring system - 2 support arms can be moved
            pressure 080 t
            chamfer lenght 1500 mm
            distance between columns 1050 mm
            dayligth 400 mm
            stroke 200 mm
            throat 405 mm
            total power requirement 7,50 kW
            weight of the machine ca. 4,9 t
            dimensions of the machine ca. 2,355 x 1,80 x 2,70 m
            Description :
            - Mechanical tool clamping Wila above + below
            - CNC axes: Y1, Y2, X, R, Z1, Z2,
            - Front safety light barrier
            - CNC control: CADMAN
            - Easyform bending angle measuring system
            - 2 support arms can be moved
          Datasheet
          Request / Contact
          used  Hydr. pressbrake WEINBRENNER GP 200/3550


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96664 · Hydr. pressbrake

          WEINBRENNER - GP 200/3550 - - 2000 -

          Technical details
          pressure 200 t︱chamfer lenght 3550 mm︱distance between columns 3050 mm︱ram stroke 324 mm︱total power requirement 18,5 kW︱weight of the machine ca. 18,70 t︱dimensions of the machine ca. m︱
          Control: Cybelec DNC 1200 PS / A 6 axes controlled: Y1, Y2, X1, X2, R, Z1, Z2 Comment: pneum. Die adjustment with 4 positions, autom. Crowning, Front bending aid CNC-controlled, hydr. Quick tool change device for punches and dies, Fiessler security system, various tools
            pressure 200 t
            chamfer lenght 3550 mm
            distance between columns 3050 mm
            ram stroke 324 mm
            total power requirement 18,5 kW
            weight of the machine ca. 18,70 t
            Description :
            Control:
            Cybelec DNC 1200 PS / A
            6 axes controlled:
            Y1, Y2, X1, X2, R, Z1, Z2
            Comment:
            pneum. Die adjustment with 4 positions,
            autom. Crowning,
            Front bending aid CNC-controlled,
            hydr. Quick tool change device for punches and dies,
            Fiessler security system,
            various tools
          Datasheet
          Request / Contact
          used  Hydr. pressbrake TRUMPF TrumaBend V 320


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96683 · Hydr. pressbrake

          TRUMPF - TrumaBend V 320 - - 2000 -

          Technical details
          pressure 320 t︱chamfer lenght 4080 mm︱distance between columns mm︱total power requirement 27 kW︱weight of the machine ca. 25,00 t︱dimensions of the machine ca. m︱
          - Control: TRUMPF V3.7.3D - CNC crowning - controlled bending aids at the front - pneumatic die adjustment - hydraulic tool clamping for upper and lower tool - Engine hours: 26428
            pressure 320 t
            chamfer lenght 4080 mm
            total power requirement 27 kW
            weight of the machine ca. 25,00 t
            Description :
            - Control: TRUMPF V3.7.3D
            - CNC crowning
            - controlled bending aids at the front
            - pneumatic die adjustment
            - hydraulic tool clamping for upper and lower tool
            - Engine hours: 26428
          Datasheet
          Request / Contact
          used  Hydr. pressbrake TRUMPF TrumaBend V320


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96675 · Hydr. pressbrake

          TRUMPF - TrumaBend V320 - - 1985 Retrofit 2005 -

          Technical details
          pressure 320 t︱chamfer lenght 4080 mm︱distance between columns 3680 mm︱throat 410 mm︱ajustment speed 150 mm/sec︱return speed 135 mm/sec︱height of stroke 365 mm︱dayligth 535 mm︱bending speed 10 mm/sec︱Control ︱total power requirement kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 4,65 x 2,31 x 3,10 m︱
          • Delem 2D graphics control Delem DA • pneumatic die displacement • 1 sliding support arm • hydraulic tool clamping above and below • CNC controlled crowning • Preparation of ACD angle measurement • controlled axes: Y1, Y2, X, R, Z1, Z2 • Upper tool set 30000mm, Trumpf OW 200 / S • Die set Trumpf Ev-W40 3000mm (almost new)
            pressure 320 t
            chamfer lenght 4080 mm
            distance between columns 3680 mm
            throat 410 mm
            ajustment speed 150 mm/sec
            return speed 135 mm/sec
            height of stroke 365 mm
            dayligth 535 mm
            bending speed 10 mm/sec
            weight of the machine ca. 24 t
            dimensions of the machine ca. 4,65 x 2,31 x 3,10 m
            Description :
            • Delem 2D graphics control Delem DA
            • pneumatic die displacement
            • 1 sliding support arm
            • hydraulic tool clamping above and below
            • CNC controlled crowning
            • Preparation of ACD angle measurement
            • controlled axes: Y1, Y2, X, R, Z1, Z2
            • Upper tool set 30000mm, Trumpf OW 200 / S
            • Die set Trumpf Ev-W40 3000mm (almost new)
          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used  Plate Shear - Hydraulic HM SBS 2600/4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-93831 · Plate Shear - Hydraulic

          HM - SBS 2600/4 - - 2011 -

          Technical details
          sheet width 2600 mm︱plate thickness 4,00 mm︱distance between columns mm︱No. of cuts 31/min. ︱total power requirement 7,50 kW︱weight of the machine ca. 3,50 t︱dimensions of the machine ca. 3,22 x 2,20 x 1,40 m︱
          • Controlled backgauge 750 mm with Elgo control • manual cutting gap adjustment • Operating manual • Sick light barrier for rear area protection • Pneumatic hold-up device • Cutting edge lighting
            sheet width 2600 mm
            plate thickness 4,00 mm
            No. of cuts 31/min.
            total power requirement 7,50 kW
            weight of the machine ca. 3,50 t
            dimensions of the machine ca. 3,22 x 2,20 x 1,40 m
            Description :
            • Controlled backgauge 750 mm with Elgo control
            • manual cutting gap adjustment
            • Operating manual
            • Sick light barrier for rear area protection
            • Pneumatic hold-up device
            • Cutting edge lighting
          Datasheet
          Request / Contact
          used  Plate Shear - Hydraulic TRUMPF-EHT TruShear 5063


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-93837 · Plate Shear - Hydraulic

          TRUMPF-EHT - TruShear 5063 - - 2011 -

          Technical details
          sheet width 3050 mm︱plate thickness 6,00 mm︱distance between columns mm︱cutting angle 0,5-2,5 °︱no.of strokes max. 34 /min.︱rear stop 10-1000 mm ︱Number of working hours 487 h︱total power requirement 11 kW︱weight of the machine ca. 8,50 t︱dimensions of the machine ca. 4,00 x 4,10 x 1,90 m︱
          • CNC -controlled backgauge 10 mm - 1000 mm • Automatic cutting gap adjustment • Automatic cutting angle adjustment • Limitation of cutting length • Scrap switch + scrap wagon • Safety light barrier for the rear of the machine • 1 support bracket with side stop, 2 T-slots, ruler, 3000 mm long • 3 support brackets with tape measure and T-slot, 1300mm long • Ball transfer units in the table and in the support brackets • Sheet holding device with rollers with sheet return to the front • Cutting edge lighting • Backgauge - can be opened automatically • Front safety light barrier as finger protection The TruShear Series 5000 adjusts the cutting angle and kerf between the top and bottom Knife "at the push of a button" the type of material and the sheet thickness.
            sheet width 3050 mm
            plate thickness 6,00 mm
            cutting angle 0,5-2,5 °
            no.of strokes max. 34 /min.
            rear stop 10-1000 mm
            Number of working hours 487 h
            total power requirement 11 kW
            weight of the machine ca. 8,50 t
            dimensions of the machine ca. 4,00 x 4,10 x 1,90 m
            Description :
            • CNC -controlled backgauge 10 mm - 1000 mm
            • Automatic cutting gap adjustment
            • Automatic cutting angle adjustment
            • Limitation of cutting length
            • Scrap switch + scrap wagon
            • Safety light barrier for the rear of the machine
            • 1 support bracket with side stop, 2 T-slots, ruler, 3000 mm long
            • 3 support brackets with tape measure and T-slot, 1300mm long
            • Ball transfer units in the table and in the support brackets
            • Sheet holding device with rollers with sheet return to the front
            • Cutting edge lighting
            • Backgauge - can be opened automatically
            • Front safety light barrier as finger protection
            The TruShear Series 5000 adjusts the cutting angle and kerf between the
            top and bottom Knife "at the push of a button" the type of material and the
            sheet thickness.
          Datasheet
          Request / Contact
          used  Plate Shear - Hydraulic DURMA MS 2000x4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-93843 · Plate Shear - Hydraulic

          DURMA - MS 2000x4 - - 2006 -

          Technical details
          sheet width 2050 mm︱plate thickness 4,00 mm︱distance between columns mm︱stroke per min. 42 ︱down holder 14 ︱rear stop 750 mm ︱total power requirement 7,5 kW︱weight of the machine ca. 2,80 t︱dimensions of the machine ca. m︱
          Motorized guillotine shears Furnishing: - motorized backgauge 750mm - Rear area protection - support arms - Angle stop - Circuit diagram - manual cutting gap adjustment - foot switch - Cutting line lighting - CE marking Dimensions: Length: 2.60 m x width 1.80 m plus support arms x height 1.35 mMotorized guillotine shears Furnishing: - motorized backgauge 750mm - Rear area protection - support arms - Angle stop - Circuit diagram - manual cutting gap adjustment - foot switch - Cutting line lighting - CE marking Dimensions: Length: 2.60 m x width 1.80 m plus support arms x height 1.35 m
            sheet width 2050 mm
            plate thickness 4,00 mm
            stroke per min. 42
            down holder 14
            rear stop 750 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,80 t
            Description :
            Motorized guillotine shears

            Furnishing:
            - motorized backgauge 750mm
            - Rear area protection
            - support arms
            - Angle stop
            - Circuit diagram
            - manual cutting gap adjustment
            - foot switch
            - Cutting line lighting
            - CE marking

            Dimensions: Length: 2.60 m x width 1.80 m plus support arms x height 1.35
            mMotorized guillotine shears

            Furnishing:
            - motorized backgauge 750mm
            - Rear area protection
            - support arms
            - Angle stop
            - Circuit diagram
            - manual cutting gap adjustment
            - foot switch
            - Cutting line lighting
            - CE marking

            Dimensions: Length: 2.60 m x width 1.80 m plus support arms x height 1.35 m
          Datasheet
          Request / Contact
          used  Plate Shear - Hydraulic EHT TSS 30/6


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-93830 · Plate Shear - Hydraulic

          EHT - TSS 30/6 - - 2003 -

          Technical details
          sheet width 3050 mm︱plate thickness 6,00 mm︱distance between columns mm︱total power requirement 11 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱
          • Angle stop 300mm, can be swiveled at 1500mm !!!) • 3 support arms a 3000mm • Controlled backgauge 10-1500mm (Elgo P8721), pivotable from 1500mm • Pneumatic 2-stage hold-up device • Sheet return (cut sheet is returned after the cutting process pushed back to the operator by means of the backgauge) • Scrap switch with waste bin on rollers can be emptied to the front • Finger protection folds to 1500mm • Rear area protection via protective grille and light barrier • Automatic cutting gap adjustment • Cutting length adjustment
            sheet width 3050 mm
            plate thickness 6,00 mm
            total power requirement 11 kW
            weight of the machine ca. 8 t
            Description :
            • Angle stop 300mm, can be swiveled at 1500mm !!!)
            • 3 support arms a 3000mm
            • Controlled backgauge 10-1500mm (Elgo P8721), pivotable from 1500mm
            • Pneumatic 2-stage hold-up device
            • Sheet return (cut sheet is returned after the cutting process
            pushed back to the operator by means of the backgauge)
            • Scrap switch with waste bin on rollers can be emptied to the front
            • Finger protection folds to 1500mm
            • Rear area protection via protective grille and light barrier
            • Automatic cutting gap adjustment
            • Cutting length adjustment
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Профиль трейдера: Frech GmbH

          Связаться с торговцем



            Frech GmbH
           Werderstr. 82
            74889 Sinsheim
            Германия
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Профиль пользователя Trader

          Основанная в 1945 Карлом Фрехом и имеющая миссис Николь Фрех в качестве менеджера поколения 3rd, компания может оглянуться на более чем восемь лет деловых традиций в городе Зинсхайм близ Гейдельберга в немецком регионе Баден. 

          Отель Sinsheim расположен на автомагистрали A6, на расстоянии часа езды на автостраде от аэропортов Франкфурт-на-Майне и Штутгарта. FRECH GmbH специализируется на работе с используемым оборудованием (разматыватели, перемотчики, роликовые лебедки, катушки, рулонные линии, линии продольной резки, линии порезания по длине, мельницы холодной прокатки и рулонные шлифовальные машины). 

          Кроме того, FRECH-Team выступает в качестве агента в следующих областях подержанной техники: рулонные машины, складные машины, шлифовальные станки, прессовые машины, прессы, металлолома и ножницы. Свяжитесь с нами, пожалуйста! - мы поможем вам и в других областях. В районе около 1000 квадратных метров залов и торговых площадей мы показываем ряд постоянно меняющихся подержанных машин, которые находятся в надлежащем рабочем состоянии и, по большей части, подходят для демонстрации. 

          Почему подержанная техника? 

          Подержанные машины в большинстве случаев доступны сразу и готовы к работе. Frech - это ваш первый адрес, когда вы хотите снизить свои капитальные затраты и повысить экономическую эффективность вашего оборудования. 

          Покупка и продажа подержанной техники - это вопрос доверия - Frech - ваш лучший контакт

          НАШИ КОНТАКТЫ




          Frech GmbH   74889 Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abkantpresse - mechanisch · Abwickelhaspel · Abwickelhaspel - Doppel · Aufwickelhaspel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Lochstanzen · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·