Европейская сеть дилеров складской техники

Категория:
    Производитель:
      Машины:
        Трейдер:

          Intermach BV - Stockist for used machines

          Machinelist:


          Facing Lathe

          used  Facing Lathe TADU FS 750


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1010053 · Facing Lathe

          TADU - FS 750 - - nb -

          Technical details
          faceplate diameter 1400 mm︱turning diameter over slide rest 1500 mm︱turning length 1000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1010053 Type of machine Faceplate lathe Make TADU Type FS 750 Build in conventioneel Type of control conventional Turnung diameter over bed 1500 mm Turning lenght 1000 mm Speeds (Rpm) 6 - 200 Additional information Faceplate diameter 1400 mm
            faceplate diameter 1400 mm
            turning diameter over slide rest 1500 mm
            turning length 1000 mm
            Description :
            Stocknumber 1010053
            Type of machine Faceplate lathe
            Make TADU
            Type FS 750
            Build in conventioneel
            Type of control conventional
            Turnung diameter over bed 1500 mm
            Turning lenght 1000 mm
            Speeds (Rpm) 6 - 200


            Additional information
            Faceplate diameter 1400 mm

          Datasheet
          Request / Contact
          used  Facing Lathe TADU FS 1250 CNC


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1010063 · Facing Lathe

          TADU - FS 1250 CNC - - NB - FAGOR 8050 T

          Technical details
          faceplate diameter 1800 mm︱turning diameter over slide rest 2500 mm︱turning length mm︱Control FAGOR 8050 T ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm
            faceplate diameter 1800 mm
            turning diameter over slide rest 2500 mm
            Control FAGOR 8050 T
            Description :
            Stocknumber 1010063
            Type of machine CNC Facelathe
            Make TADU
            Type FS 1250
            Build in nb
            Type of control FAGOR, 8050T
            Turnung diameter over bed 2500 mm


            Additional information
            4-jaws chuck 1800 mm

          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled TOS SU150


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1010067 · Lathe - cycle-controlled

          TOS - SU150 - - 1998 - fagor

          Technical details
          turning diameter 1500 mm︱turning length 5000 mm︱control fagor ︱total power requirement kW︱weight of the machine ca. 10,9 t︱dimensions of the machine ca. m︱
          Stocknumber1010067 Type of machineTeach-inn lathe MakeTOS TypeSU150 Build in1998 Type of controlFAGOR 8055i Turnung diameter over bed1500 Turning diameter over slide rest1200 Turning lenght5000 Spindle hollow115 Speeds (Rpm)max. 450 Max. load8000 kg Weight of the machine10.900 kg Lenght (mm)8900 Width (mm)2850 Height (mm)2100
            turning diameter 1500 mm
            turning length 5000 mm
            control fagor
            weight of the machine ca. 10,9 t
            Description :
            Stocknumber1010067
            Type of machineTeach-inn lathe
            MakeTOS
            TypeSU150
            Build in1998
            Type of controlFAGOR 8055i
            Turnung diameter over bed1500
            Turning diameter over slide rest1200
            Turning lenght5000
            Spindle hollow115
            Speeds (Rpm)max. 450
            Max. load8000 kg
            Weight of the machine10.900 kg
            Lenght (mm)8900
            Width (mm)2850
            Height (mm)2100

          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column CINCINATTI 2000/2250


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1020026 · Vertical Turret Lathe - Double Column

          CINCINATTI - 2000/2250 - - nb -

          Technical details
          faceplate diameter 2000 mm︱swing diameter 2250 mm︱turning height 1900 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1020026 Type of machine Vertikal Turret Lathe Make CINCINATI Type of control conventionel/ DRO Faceplate diameter 2000 mm Max. Swing diameter 2250 mm Turning height max. 1900 mm Max. adjustment off cross rail 800 mm Max. vertikal adjustment crossrail support 900 mm Turning speeds of the faceplate (Rpm)
            faceplate diameter 2000 mm
            swing diameter 2250 mm
            turning height 1900 mm
            Description :
            Stocknumber 1020026
            Type of machine Vertikal Turret Lathe
            Make CINCINATI
            Type of control conventionel/ DRO
            Faceplate diameter 2000 mm
            Max. Swing diameter 2250 mm
            Turning height max. 1900 mm
            Max. adjustment off cross rail 800 mm
            Max. vertikal adjustment crossrail support 900 mm
            Turning speeds of the faceplate (Rpm)

          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column TMG-Titan SC 43


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1020044 · Vertical Turret Lathe - Double Column

          TMG-Titan - SC 43 - - 2009 - Siemens 840D

          Technical details
          faceplate diameter 4000 mm︱swing diameter 4300 mm︱turning height 3200 mm︱Control Siemens 840D ︱total power requirement 100 kW︱weight of the machine ca. 95 t︱dimensions of the machine ca. 7,9 x 6 x 7,8 m︱
          Stocknumber 1020044 Type of machine CNC VTL Make TMG-TITAN Type SC43-3HY-CNC-MSF-01 Build in 2009 Type of control Siemens 840 d Faceplate diameter 4.000 mm Max. Swing diameter 4.250 mm Turning height max. 3.200/2.950 mm Max. workload on the table 40.000 kg Turning speeds of the faceplate (Rpm) 2 - 115 Total Power (KW) 100 Lenght (mm) 7900 Width (mm) 6000 Height (mm) 7800 Weight 95.000 kg Additional information Incl. C-axe and driven tools
            faceplate diameter 4000 mm
            swing diameter 4300 mm
            turning height 3200 mm
            Control Siemens 840D
            total power requirement 100 kW
            weight of the machine ca. 95 t
            dimensions of the machine ca. 7,9 x 6 x 7,8 m
            Description :
            Stocknumber 1020044
            Type of machine CNC VTL
            Make TMG-TITAN
            Type SC43-3HY-CNC-MSF-01
            Build in 2009
            Type of control Siemens 840 d
            Faceplate diameter 4.000 mm
            Max. Swing diameter 4.250 mm
            Turning height max. 3.200/2.950 mm
            Max. workload on the table 40.000 kg
            Turning speeds of the faceplate (Rpm) 2 - 115
            Total Power (KW) 100
            Lenght (mm) 7900
            Width (mm) 6000
            Height (mm) 7800
            Weight 95.000 kg


            Additional information
            Incl. C-axe and driven tools


          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column GTC 20090


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1020037 · Vertical Turret Lathe - Double Column

          GTC - 20090 - - 2007 - siemens 810D

          Technical details
          faceplate diameter 1.600 mm︱swing diameter 2.000 mm︱turning height 1.600 mm︱control siemens 810D ︱total power requirement 55 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1020037 Type of machine CNC VTL Make GTC Type 20090 Build in 2007 Type of control CNC Siemens 810D Faceplate diameter 1600 mm Max. Swing diameter 2000 mm Turning height max. 1600 mm Turning speeds of the faceplate (Rpm) 250 Total Power (KW) 55 Additional information incl ATC for 12 tools
            faceplate diameter 1.600 mm
            swing diameter 2.000 mm
            turning height 1.600 mm
            control siemens 810D
            total power requirement 55 kW
            Description :
            Stocknumber 1020037
            Type of machine CNC VTL
            Make GTC
            Type 20090
            Build in 2007
            Type of control CNC Siemens 810D
            Faceplate diameter 1600 mm
            Max. Swing diameter 2000 mm
            Turning height max. 1600 mm
            Turning speeds of the faceplate (Rpm) 250
            Total Power (KW) 55


            Additional information
            incl ATC for 12 tools

          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column MORANDO KN17


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1020040 · Vertical Turret Lathe - Single Column

          MORANDO - KN17 - - NB -

          Technical details
          faceplate diameter 1.700 mm︱swing diameter 1.900 mm︱turning height 1.350 mm︱total power requirement 62 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. m︱
          Stocknumber 1020040 Type of machine VTL Make MORANDO Type KN 17 Build in nb Type of control conventional Faceplate diameter 1700 mm Max. Swing diameter 1900 mm Turning height max. 1350 mm Max. workload on the table 10.000 Kg Turning speeds of the faceplate (Rpm) 1,9 - 170 Total Power (KW) 62 Weight 25 ton Additional information including digital read out
            faceplate diameter 1.700 mm
            swing diameter 1.900 mm
            turning height 1.350 mm
            total power requirement 62 kW
            weight of the machine ca. 25 t
            Description :
            Stocknumber 1020040
            Type of machine VTL
            Make MORANDO
            Type KN 17
            Build in nb
            Type of control conventional
            Faceplate diameter 1700 mm
            Max. Swing diameter 1900 mm
            Turning height max. 1350 mm
            Max. workload on the table 10.000 Kg
            Turning speeds of the faceplate (Rpm) 1,9 - 170
            Total Power (KW) 62
            Weight 25 ton


            Additional information
            including digital read out

          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column WICKMANN & BENNETT Aeroturn 120-160


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1020045 · Vertical Turret Lathe - Single Column

          WICKMANN & BENNETT - Aeroturn 120-160 - - 2008 -

          Technical details
          faceplate diameter 1200 mm︱swing diameter 1500 mm︱turning height 1150 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1020045 Type of machine CNC VTL Make WICKMAN BENNETT Type Aeroturn 125-160 Build in 2008 Type of control Siemens 840 d Faceplate diameter 1200 mm Max. Swing diameter 1500 mm Turning height max. 1150 mm Max. workload on the table 10.000 Kg Turning speeds of the faceplate (Rpm) 0,2 - 375 Weight 16 ton Additional information ATC for 30 tools Driven tools C-axe
            faceplate diameter 1200 mm
            swing diameter 1500 mm
            turning height 1150 mm
            Description :
            Stocknumber 1020045
            Type of machine CNC VTL
            Make WICKMAN BENNETT
            Type Aeroturn 125-160
            Build in 2008
            Type of control Siemens 840 d
            Faceplate diameter 1200 mm
            Max. Swing diameter 1500 mm
            Turning height max. 1150 mm
            Max. workload on the table 10.000 Kg
            Turning speeds of the faceplate (Rpm) 0,2 - 375
            Weight 16 ton


            Additional information
            ATC for 30 tools
            Driven tools
            C-axe

          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column HANKOOK VLC 30/70


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1020041 · Vertical Turret Lathe - Single Column

          HANKOOK - VLC 30/70 - - 2004 - FANUC 18i-TB

          Technical details
          faceplate diameter 3.000 mm︱swing diameter 7.000 mm︱turning height 3.000 mm︱Control FANUC 18i-TB ︱total power requirement 60/75 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 3.000 mm
            swing diameter 7.000 mm
            turning height 3.000 mm
            Control FANUC 18i-TB
            total power requirement 60/75 kW
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column You LI VTL 1600 ATC


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-D800 · Vertical Turret Lathe - Single Column

          You LI - VTL 1600 ATC - - 2003 - Fanuc series 18T

          Technical details
          faceplate diameter 1600 mm︱swing diameter 2000 mm︱turning height 1200 mm︱Control Fanuc series 18T ︱total power requirement 37/45 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 5850x4510x5400 m︱
          Next image can not be found: d800 you ji vtl 1600 atc - 2003 tooling (6) Brand: You Ji Type: VTL 1600 ATC CNC brand: Fanuc CNC model: Series 18-T Year of make: 2003-01 Maximum turning diameter : 1.800 mm ø Turning height: 1.200 mm 3-jaw chuck: 1.600 mm ø Spindle taper: MAS BT50 X: - 800 +1.015 mm Z: 900 mm Rapid traverse: 0 - 2.000 mm/min Tool changer: 12 Maximum workpiece weight: 8.000 kg Machine dimensions (lxwxh): 5.850 x 4.510 x 5.400 mm Machine weight: 24.000 kg Serial number: 02VTL16T0655
            faceplate diameter 1600 mm
            swing diameter 2000 mm
            turning height 1200 mm
            Control Fanuc series 18T
            total power requirement 37/45 kW
            weight of the machine ca. 24 t
            dimensions of the machine ca. 5850x4510x5400 m
            Description :
            Next image can not be found: d800 you ji vtl 1600 atc - 2003 tooling (6)
            Brand: You Ji
            Type: VTL 1600 ATC
            CNC brand: Fanuc
            CNC model: Series 18-T
            Year of make: 2003-01
            Maximum turning diameter : 1.800 mm ø
            Turning height: 1.200 mm
            3-jaw chuck: 1.600 mm ø
            Spindle taper: MAS BT50
            X: - 800 +1.015 mm
            Z: 900 mm
            Rapid traverse: 0 - 2.000 mm/min
            Tool changer: 12
            Maximum workpiece weight: 8.000 kg
            Machine dimensions (lxwxh): 5.850 x 4.510 x 5.400 mm
            Machine weight: 24.000 kg
            Serial number: 02VTL16T0655
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column PIETRO CARNAGHI AC10 CNC


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1020042 · Vertical Turret Lathe - Single Column

          PIETRO CARNAGHI - AC10 CNC - - 1987 - SIEMENS 850M

          Technical details
          faceplate diameter 1000 mm︱swing diameter 1400 mm︱turning height 1400 mm︱control SIEMENS 850M ︱total power requirement 125 kW︱weight of the machine ca. 38 t︱dimensions of the machine ca. m︱
          Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer
            faceplate diameter 1000 mm
            swing diameter 1400 mm
            turning height 1400 mm
            control SIEMENS 850M
            total power requirement 125 kW
            weight of the machine ca. 38 t
            Description :
            Stocknumber 1020042
            Type of machine CNC VTL
            Make PIETRO CARNAGHI
            Type AC 10 CNC
            Build in 1987
            Type of control Siemens 850 M/E
            Faceplate diameter 1000 mm
            Max. Swing diameter 1400 mm
            Turning height max. 1400 mm
            Total Power (KW) totaal 125
            Lenght (mm) 11000
            Width (mm) 8000
            Height (mm) 6000
            Weight 38000 kg


            Additional information
            with driven tools
            with pallet changer

          Datasheet
          Request / Contact

          Floor Type Boring and Milling M/C - Hor.

          used  Floor Type Boring and Milling M/C - Hor. PEGARD af 11


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1210014 · Floor Type Boring and Milling M/C - Hor.

          PEGARD - af 11 - - nb -

          Technical details
          spindle diameter 110 mm︱x-travel 4000 mm︱y-travel 2000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1210014 Type of machine Floortype Boring Machine Make PEGARD Type AF11 Type of control Conventional Spindle diameter 110 mm X-stroke (mm) 4000 Y-stroke (mm) 2000 Z-stroke (mm) 300/750 Table dimensions (mm) 1200 x 1600 mm Table rotation (degrees) 360 Tool Taper Iso 50 Speeds (Rpm) 4 - 1000
            spindle diameter 110 mm
            x-travel 4000 mm
            y-travel 2000 mm
            Description :

            Stocknumber 1210014
            Type of machine Floortype Boring Machine
            Make PEGARD
            Type AF11
            Type of control Conventional
            Spindle diameter 110 mm
            X-stroke (mm) 4000
            Y-stroke (mm) 2000
            Z-stroke (mm) 300/750
            Table dimensions (mm) 1200 x 1600 mm
            Table rotation (degrees) 360
            Tool Taper Iso 50
            Speeds (Rpm) 4 - 1000



          Datasheet
          Request / Contact
          used  Floor Type Boring and Milling M/C - Hor. WOTAN Rapid 5C


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1210057 · Floor Type Boring and Milling M/C - Hor.

          WOTAN - Rapid 5C - - 2004 -

          Technical details
          spindle diameter 160 mm︱x-travel 10.000 mm︱y-travel 3.000 mm︱Control ︱total power requirement 120/63 spindel kW︱weight of the machine ca. 63 t︱dimensions of the machine ca. 15x3.85x7.36 m︱
          Stocknumber 1210057 Type of machine CNC Floortype boring machine Make WOTAN Type Rapid 5C Build in 2004 Type of control HEIDENHAIN iTNC 530 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.800 Z-stroke (mm) 700 W-stroke 700 mm Tool Taper Iso 50 Speeds (Rpm) 1,25 - 1250 Feeds (mm/R) 1 - 5000 mm/min Rapid feeds 5 mtr/min. Total Power (KW) 120 /spindel 83 Lenght (mm) 14.500 Width (mm) 3.850 Height (mm) 7.360 Weight 62.300 kg Additional information completely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530 - 4 different angular milling heads - hydrostatic spindle bearing - aerostatic guideways - coolant device - chip conveyor - oil cooler Film YouTube: https://www.youtube.com/watch?v=ks6D5rutslg
            spindle diameter 160 mm
            x-travel 10.000 mm
            y-travel 3.000 mm
            total power requirement 120/63 spindel kW
            weight of the machine ca. 63 t
            dimensions of the machine ca. 15x3.85x7.36 m
            Description :
            Stocknumber 1210057
            Type of machine CNC Floortype boring machine
            Make WOTAN
            Type Rapid 5C
            Build in 2004
            Type of control HEIDENHAIN iTNC 530
            Spindle diameter 160 mm
            X-stroke (mm) 10.000
            Y-stroke (mm) 3.800
            Z-stroke (mm) 700
            W-stroke 700 mm
            Tool Taper Iso 50
            Speeds (Rpm) 1,25 - 1250
            Feeds (mm/R) 1 - 5000 mm/min
            Rapid feeds 5 mtr/min.
            Total Power (KW) 120 /spindel 83
            Lenght (mm) 14.500
            Width (mm) 3.850
            Height (mm) 7.360
            Weight 62.300 kg


            Additional information
            completely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530
            - 4 different angular milling heads
            - hydrostatic spindle bearing
            - aerostatic guideways
            - coolant device
            - chip conveyor
            - oil cooler

            Film YouTube: https://www.youtube.com/watch?v=ks6D5rutslg


          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine TOS VO 50


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1610008 · Radial Drilling Machine

          TOS - VO 50 - - NB -

          Technical details
          bore capacity in steel (diameter) 50 mm︱arm length 1500 mm︱workpiece height max. mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1610008 Type of machine Radial drill Make MAS Type VO 50 Admision in drilling spindle MT 5 Max. drill capacity 50 mm Base dimensions 1820 x 986 mm Speeds (Rpm) 28 - 2500 Feeds (mm/R) 0,5 - 2 Lenght (mm) 3250 Width (mm) 1120 Height (mm) 3396 Weight 4550
            bore capacity in steel (diameter. 50 mm
            arm length 1500 mm
            Description :
            Stocknumber 1610008
            Type of machine Radial drill
            Make MAS
            Type VO 50
            Admision in drilling spindle MT 5
            Max. drill capacity 50 mm
            Base dimensions 1820 x 986 mm
            Speeds (Rpm) 28 - 2500
            Feeds (mm/R) 0,5 - 2
            Lenght (mm) 3250
            Width (mm) 1120
            Height (mm) 3396
            Weight 4550


          Datasheet
          Request / Contact

          Ram-Type Floor Boring and Milling M/C

          used  Ram-Type Floor Boring and Milling M/C SKODA W 160 HC


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1210060 · Ram-Type Floor Boring and Milling M/C

          SKODA - W 160 HC - - 1990 -

          Technical details
          spindle diameter 160 mm︱x-travel 15000 mm︱y-travel 4000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1210060 Type of machine Floortype Boring machine Make SKODA Type W160HC Build in 1990 Spindle diameter 160 mm X-stroke (mm) 15.000 Y-stroke (mm) 4.000 Z-stroke (mm) 1.600 W-stroke 1.250 Tool Taper Iso 50 Additional information With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm 3 millingheads and 1 support 1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm
            spindle diameter 160 mm
            x-travel 15000 mm
            y-travel 4000 mm
            Description :
            Stocknumber 1210060
            Type of machine Floortype Boring machine
            Make SKODA
            Type W160HC
            Build in 1990
            Spindle diameter 160 mm
            X-stroke (mm) 15.000
            Y-stroke (mm) 4.000
            Z-stroke (mm) 1.600
            W-stroke 1.250
            Tool Taper Iso 50


            Additional information
            With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm
            3 millingheads and 1 support
            1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm

          Datasheet
          Request / Contact
          used  Ram-Type Floor Boring and Milling M/C SKODA W 160 CNC


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1210050 · Ram-Type Floor Boring and Milling M/C

          SKODA - W 160 CNC - - 1974/2002 - ICEM 402

          Technical details
          spindle diameter 160 mm︱x-travel 10.000 mm︱y-travel 3.000 mm︱Control ICEM 402 ︱total power requirement kW︱weight of the machine ca. 80 t︱dimensions of the machine ca. m︱
          Stocknumber 1210050 Type of machine CNC Floortype Boring Machine Make SKODA Type W 160 CNC Build in 1974/retrofitted in 2002 Type of control ICEM 402 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.000 Z-stroke (mm) 1600 W-stroke 1250 mm Speeds (Rpm) 1 - 1.200 Feeds (mm/R) 0,5 - 8.000 mm/min. Rapid feeds 8.000 mm/min Total Power (KW) 180 KvA Weight 80 ton
            spindle diameter 160 mm
            x-travel 10.000 mm
            y-travel 3.000 mm
            Control ICEM 402
            weight of the machine ca. 80 t
            Description :
            Stocknumber 1210050
            Type of machine CNC Floortype Boring Machine
            Make SKODA
            Type W 160 CNC
            Build in 1974/retrofitted in 2002
            Type of control ICEM 402
            Spindle diameter 160 mm
            X-stroke (mm) 10.000
            Y-stroke (mm) 3.000
            Z-stroke (mm) 1600
            W-stroke 1250 mm
            Speeds (Rpm) 1 - 1.200
            Feeds (mm/R) 0,5 - 8.000 mm/min.
            Rapid feeds 8.000 mm/min
            Total Power (KW) 180 KvA
            Weight 80 ton

          Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used  Table Type Boring and Milling Machine PBR AF90


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1210033 · Table Type Boring and Milling Machine

          PBR - AF90 - - NB -

          Technical details
          spindle diameter 90 mm︱x-travel 1475 mm︱y-travel 1200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Brand: PBR Type: AF-90 Used machine X: 1.475 mm Y: 1.200 mm Table length: 1.200 mm Table width: 950 mm Intake: ISO 40 Speed: 12,5 - 1.250 RPM Equipped with foldable level rotary support diam. 500 mm Digital readout on the X, Y, Z axis, Type of track With control console on swivel arm With lunette With universal milling head Optical viewer for ruler
            spindle diameter 90 mm
            x-travel 1475 mm
            y-travel 1200 mm
            Description :
            Brand: PBR
            Type: AF-90
            Used machine




            X: 1.475 mm
            Y: 1.200 mm
            Table length: 1.200 mm
            Table width: 950 mm
            Intake: ISO 40
            Speed: 12,5 - 1.250 RPM

            Equipped with foldable level rotary support diam. 500 mm
            Digital readout on the X, Y, Z axis, Type of track
            With control console on swivel arm
            With lunette
            With universal milling head
            Optical viewer for ruler
          Datasheet
          Request / Contact
          used  Table Type Boring and Milling Machine TOS WHN 13.4 C


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1210035 · Table Type Boring and Milling Machine

          TOS - WHN 13.4 C - - 1989 - heidenhain tnc 360

          Technical details
          spindle diameter 130 mm︱x-travel 2000 mm︱y-travel 2000 mm︱Control heidenhain tnc 360 ︱total power requirement 37 kW︱weight of the machine ca. 32 t︱dimensions of the machine ca. m︱
          Stocknumber 1210035 Type of machine CNC Tabletype boring machine Make TOS Type WHN 13.4 A Build in 1989 Type of control HEIDENHAIN TNC 360 Spindle diameter 130 mm X-stroke (mm) 2000 Y-stroke (mm) 2000 Z-stroke (mm) 1250 W-stroke 800 Table dimensions (mm) 1800 x 1600 Table rotation (degrees) 360 Tool Taper Iso 50 Speeds (Rpm) 1,25 - 900 Total Power (KW) 37 Weight 32 ton
            spindle diameter 130 mm
            x-travel 2000 mm
            y-travel 2000 mm
            Control heidenhain tnc 360
            total power requirement 37 kW
            weight of the machine ca. 32 t
            Description :
            Stocknumber 1210035
            Type of machine CNC Tabletype boring machine
            Make TOS
            Type WHN 13.4 A
            Build in 1989
            Type of control HEIDENHAIN TNC 360
            Spindle diameter 130 mm
            X-stroke (mm) 2000
            Y-stroke (mm) 2000
            Z-stroke (mm) 1250
            W-stroke 800
            Table dimensions (mm) 1800 x 1600
            Table rotation (degrees) 360
            Tool Taper Iso 50
            Speeds (Rpm) 1,25 - 900
            Total Power (KW) 37
            Weight 32 ton

          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal SORALUCE Soramill SL 500


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1110023 · Bed Type Milling Machine - Universal

          SORALUCE - Soramill SL 500 - - 1995 - heidenhain tnc 415B

          Technical details
          x-travel 3500 mm︱y-travel 900 mm︱z-travel 1000 mm︱Control heidenhain tnc 415B ︱total power requirement 22 /spindel kW︱weight of the machine ca. 16.5 t︱dimensions of the machine ca. 7.2x3.9x3.2 m︱
          Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution
            x-travel 3500 mm
            y-travel 900 mm
            z-travel 1000 mm
            Control heidenhain tnc 415B
            total power requirement 22 /spindel kW
            weight of the machine ca. 16.5 t
            dimensions of the machine ca. 7.2x3.9x3.2 m
            Description :
            Make SORALUCE
            Type Soramill SL 5000
            Built in 1995
            Control type HEIDENHAIN TNC 415 B
            Table size (mm) 5000 x 800 mm
            X out (mm) 3500
            Y-off (mm) 900
            Z-off (mm) 1000
            Maximum table load 12,5 ton
            Speed (RPM) 20-. 2,000
            Tool holder ISO 50
            Feed along (mm/Rev) 5 - 10000 mm / min.
            Rapid traverse 12 mtr/min.
            Gesamtleistung(kW) 22
            Length (mm) 7250
            Width (mm) 3900
            Height (mm) 3200
            Weight 16500 kg


            Additional information
            Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable
            Cooling medium institution
          Datasheet
          Request / Contact
          used  Bed Type Milling Machine - Universal ZAYER 30KMU 12000


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1110053 · Bed Type Milling Machine - Universal

          ZAYER - 30KMU 12000 - - 1992 - heidenhain tnc 415

          Technical details
          x-travel 10300 mm︱y-travel 1.000 mm︱z-travel 1500 mm︱Control heidenhain tnc 415 ︱total power requirement 37 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. m︱
          Stocknumber 1110053 Type of machine CNC BEDTYPE MILLING MACHINE Make ZAYER Type 30KMU12000 Build in 1992 Type of control Heidenhain TNC 415 Table dimensions (mm) 12.000 x 1.015 X-stroke (mm) 10.300 Y-stroke (mm) 1.000 Z-stroke (mm) 1.500 Speeds (Rpm) 35 - 3.000 Admission in spindlehead MAS BT 550 Feeds X (mm/R) 6 - 5.000 mm/min. Feeds Y (mm/R) 6 - 5.000 mm/min. Feeds Z (mm/R) 6 - 5.000 mm/min. Rapid feeds 10/15/15 mtr/min Total Power (KW) 37 Weight 50.000 kg Additional information ATC for 60 tools
            x-travel 10300 mm
            y-travel 1.000 mm
            z-travel 1500 mm
            Control heidenhain tnc 415
            total power requirement 37 kW
            weight of the machine ca. 50 t
            Description :
            Stocknumber 1110053
            Type of machine CNC BEDTYPE MILLING MACHINE
            Make ZAYER
            Type 30KMU12000
            Build in 1992
            Type of control Heidenhain TNC 415
            Table dimensions (mm) 12.000 x 1.015
            X-stroke (mm) 10.300
            Y-stroke (mm) 1.000
            Z-stroke (mm) 1.500
            Speeds (Rpm) 35 - 3.000
            Admission in spindlehead MAS BT 550
            Feeds X (mm/R) 6 - 5.000 mm/min.
            Feeds Y (mm/R) 6 - 5.000 mm/min.
            Feeds Z (mm/R) 6 - 5.000 mm/min.
            Rapid feeds 10/15/15 mtr/min
            Total Power (KW) 37
            Weight 50.000 kg


            Additional information
            ATC for 60 tools

          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used  Planer-Type Milling M/C - Double Column KAO MING 332M Multi face


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1110043 · Planer-Type Milling M/C - Double Column

          KAO MING - 332M Multi face - - 2009 - FANUC 18iTB

          Technical details
          x-travel 3.230 mm︱y-travel 3.850 mm︱z-travel 1.100 mm︱Control FANUC 18iTB ︱total power requirement 22/26 kW︱weight of the machine ca. 44 t︱dimensions of the machine ca. 8.1x7.5x5 m︱
          Make KAO MING Typ332M multi face Year of construction 2009 Control type CNC FANUC 18i-MB Table size (mm) 3000 x 2600 mm X out (mm) 3230 Y-off (mm) 3850 Z-off (mm) 1100 / max. distance between table and spindle 1425 mm Table burden 12,000 kg Speed (RPM) maximum 8000 tool holder ISO 50 Feed along (mm/Rev) 5 mtr/min. Feed (mm/Rev) across 5 mtr/min Vorschüb vertical (mm/Rev) 5 mtr/min. Rapid traverse 10 mtr/min Gesamtleistung(kW) spindle 22/26 kW Length (mm) 8130 Width (mm) 7493 Height (mm) 5080 Weight 44,000 kg Additional information WzW for 30 tools
            x-travel 3.230 mm
            y-travel 3.850 mm
            z-travel 1.100 mm
            Control FANUC 18iTB
            total power requirement 22/26 kW
            weight of the machine ca. 44 t
            dimensions of the machine ca. 8.1x7.5x5 m
            Description :
            Make KAO MING
            Typ332M multi face
            Year of construction 2009
            Control type CNC FANUC 18i-MB
            Table size (mm) 3000 x 2600 mm
            X out (mm) 3230
            Y-off (mm) 3850
            Z-off (mm) 1100 / max. distance between table and spindle 1425 mm
            Table burden 12,000 kg
            Speed (RPM) maximum 8000 tool holder ISO 50
            Feed along (mm/Rev) 5 mtr/min.
            Feed (mm/Rev) across 5 mtr/min
            Vorschüb vertical (mm/Rev) 5 mtr/min.
            Rapid traverse 10 mtr/min
            Gesamtleistung(kW) spindle 22/26 kW
            Length (mm) 8130
            Width (mm) 7493
            Height (mm) 5080
            Weight 44,000 kg


            Additional information
            WzW for 30 tools
          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column CORREA rapid 5


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1110051 · Planer-Type Milling M/C - Double Column

          CORREA - rapid 5 - - 2004 -

          Technical details
          x-travel 5000 mm︱y-travel 3100 mm︱z-travel 1200 mm︱Control ︱total power requirement 20/27 kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 15x6,2x6 m︱
          Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd
            x-travel 5000 mm
            y-travel 3100 mm
            z-travel 1200 mm
            total power requirement 20/27 kW
            weight of the machine ca. 65 t
            dimensions of the machine ca. 15x6,2x6 m
            Description :
            Stock number 1110051
            Machine type CNC Portal milling machine
            Make CORREA
            Rapid type 50
            Year of manufacture 2004
            Control type HEIDENHAIN
            Table size (mm) 5000 x 2000 mm
            X out (mm) 5000 mm
            Y-off (mm) 3100 mm
            Z-off (mm) 1200 mm
            Table load Max 15 ton
            Speed (RPM) Max 18,000
            Tool holder HSK 63
            Gesamtleistung(kW) 20/27
            Length (mm) 15000
            Width (mm) 6200
            Height (mm) 6000
            Weight 65 ton


            Additional information

            Tool changer for 24 tools
            5-axis gesteuerd
          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column Zimmermann FZ30


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-110052 · Planer-Type Milling M/C - Double Column

          Zimmermann - FZ30 - - 2000 -

          Technical details
          x-travel 3000 mm︱y-travel 2860 mm︱z-travel 1250 mm︱x-axis 3000 mm︱y-axis 2860 mm︱z-axis 1250 mm︱control ︱total power requirement 20 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 5500x5650x4190 mm m︱
          Stocknumber 1110052 Type of machine CNC Portal milling machine Make ZIMMERMANN Type FZ 30 Build in 2000 Type of control Heidenhain TNC 426 PB Table dimensions (mm) 4500 x 2500 X-stroke (mm) 3000 Y-stroke (mm) 2860 Z-stroke (mm) 1250 Table load max. 30.000 kg/m2 Speeds (Rpm) 1000 - 14.000 Admission in spindlehead SK 40 Feeds X (mm/R) max. 20.000 mm/min. Feeds Y (mm/R) max. 20.000 mm/min. Feeds Z (mm/R) max. 20.000 mm/min. Rapid feeds max 20.000 mm/min. Total Power (KW) 20 Lenght (mm) 5500 Width (mm) 5650 Height (mm) 4190 Weight 16.000 kg
            x-travel 3000 mm
            y-travel 2860 mm
            z-travel 1250 mm
            x-axis 3000 mm
            y-axis 2860 mm
            z-axis 1250 mm
            total power requirement 20 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 5500x5650x4190 mm m
            Description :
            Stocknumber 1110052
            Type of machine CNC Portal milling machine
            Make ZIMMERMANN
            Type FZ 30
            Build in 2000
            Type of control Heidenhain TNC 426 PB
            Table dimensions (mm) 4500 x 2500
            X-stroke (mm) 3000
            Y-stroke (mm) 2860
            Z-stroke (mm) 1250
            Table load max. 30.000 kg/m2
            Speeds (Rpm) 1000 - 14.000
            Admission in spindlehead SK 40
            Feeds X (mm/R) max. 20.000 mm/min.
            Feeds Y (mm/R) max. 20.000 mm/min.
            Feeds Z (mm/R) max. 20.000 mm/min.
            Rapid feeds max 20.000 mm/min.
            Total Power (KW) 20
            Lenght (mm) 5500
            Width (mm) 5650
            Height (mm) 4190
            Weight 16.000 kg


          Datasheet
          Request / Contact

          Travelling column milling machine

          used  Travelling column milling machine FPT Spirit 130


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1110049 · Travelling column milling machine

          FPT - Spirit 130 - - 2012 - Heidenhain Itnc 530

          Technical details
          x-travel 14.000 mm︱y-travel 1.500 mm︱z-travel 3.000 mm︱Control Heidenhain Itnc 530 ︱total power requirement 50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour
            x-travel 14.000 mm
            y-travel 1.500 mm
            z-travel 3.000 mm
            Control Heidenhain Itnc 530
            total power requirement 50 kW
            Description :
            Stocknumber 1110049
            Type of machine CNC floortype milling machine
            Make FPT
            Type Spirit 130
            Build in 2012
            Type of control HEIDENHAIN TNC Itnc 530
            X-stroke (mm) 14.000
            Y-stroke (mm) 1.500
            Z-stroke (mm) 3.000
            Speeds (Rpm) max. 4.000
            Admission in spindlehead Iso 50
            Rapid feeds max 25.000 mm/min


            Additional information
            Program run 9655 hour

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          Intermach BV   8316BC Marknesse Lange Voor 71 Niederlande
          Intermach BV

          Lange Voor 71



          Contact Trader


            Intermach BV
           Lange Voor 71
            8316BC Marknesse
            Niederlande
            +31 (0)527 201323
            +31 (0)527 203038
            info@intermach.nl
            www.intermach.nl
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Bandsäge - Automatisch · Bettfräsmaschine - Universal · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Bohrwerkstisch · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Kopfdrehmaschine · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Portalfräsmaschine · Radialbohrmaschine · Rundschleifmaschine · Rundschleifmaschine - Außen · Tafelschere - hydraulisch · Tischbohrwerk ·