MEB Maschinenhandel GmbH - Stockist for used machines

Haul-off force -- N︱Press length 115 mm︱Belt width 40 mm︱

---

Haul-off force -- N︱Press length 260 mm︱Belt width 85 mm︱

---

machine measurements 6.850 x 3.600 x 1.900 mm︱machine weight 5.000 kg︱power capacity 9 kW︱

---

Condition: used - as good as new unit is still completely packed Specification: Medical surgical mask system complete Consisting of: - See sketches in the attachment Summary of the equipment: This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The nose bridge strip is rolled up for traction and unrolled. After cutting with a fixed length, it is imported into the edge cloth. The two sides are welded to the seal by ultrasonic welding. The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonic welding. After the mask is made, it is transported to the flat belt line through the assembly line for collection. - CE certified is available - Space requirement L/W/H approx.: 6,850 x 3,600 x 1,900 mm - Weight approx.: 5,000 kg - Paint finish: RAL 9003 - Voltage: 220V AC, 50 Hz - Total power approx.: 9 kW

machine measurements 9.657 x 1.472 x 1.985 mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used - as good as new Specification: FFP 2 N95 mask system complete Consisting of: - see sketches in the plant - cycle time approx.: 35 - 50 pieces/min - not CE certified - Space requirement approx.: 9,657 x 1,472 x 1,985 mm - Completely assembled

machine measurements -- mm︱machine weight -- kg︱power capacity 7,5 kW︱

---

Condition: used Specification: cartridge filter system for adjacent fan type: KWH-SIGA 18 with exhaust air system VEH 7500-C2 for transport of dry air without dust content or only with low dust content - used - year of construction: 2018 - Cartridge filter system type: KWH-SIMMA 18 - Fan in sound insulation bonnet type: VEH 7500-C2 - Motor power: 7,5 kW - Air volume: 7,500 m³/h - Negative pressure: 1,600 Pa

machine measurements 3.000 mm︱machine weight -- kg︱power capacity 90 kW︱

---

machine measurements 12.200x1.800x800 mm︱machine weight 1.040 kg︱power capacity 27 kW︱

---

machine measurements 2.200 x 1.200 x 2.260 mm︱machine weight 1.000 kg︱power capacity -- kW︱

---

Condition: used Specification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations - year of construction approx.: 2011 - pick-up stations: 16 - measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm) - Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day - Technical application: surface defect and crack detection on O-rings - Sorting function: Good, Bad, Undefined - Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm - Weight approx.: 1,000 kg Camera defective!

machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 182 kW︱

---

Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022.

machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 170 kW︱

---

Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022.

machine measurements Länge ca. 21.000 mm︱machine weight -- kg︱power capacity 200 kW︱

---

Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015

machine measurements ca. 12.000 mm︱machine weight -- kg︱power capacity -- kW︱ 550 mm︱

---

Condition: new Specification: Batch-Off-plant for rubber stripes - new - width stripes inlet up to 700 mm - maximum width value of rubber strip: 550 mm - input moving belt - rubber band stapler - stainless steel tank to contain release agent - stainless steel mesh band to extract the material - dry tunnel with 6 cooling fans 800 x 800 mm - length cooling section: about 8000 mm - output: fixed belt - storage: Wig-wag palletization system - total length of plant: about 12.000 mm - painting acc. to your specifications - safety guards: acc. to current standard - N.6 AC main motors on the line, driven by inverter systems - new electric cabinet and panels - on-board machine system new new construction with guarantee with CE mark and CE user and maintenance manual in English

chamber volume 38 liter︱useable volume -- liter︱friction ca. 1:1,17 ︱motor drive power 110 KW︱

---

SSpecification: internal mixer - used usable volume: approx. 38 litres (depending on the filling factor) - closing system: trap door - pneumatic ram: for material loading - gearbox: semi-unidrive system - Rotor geometry: tangential - Friction approx.: 1:1.17 (to be checked) - Slewing rings for water cooling new - AC motor: 110 KW - 400 V - 50 Hz - Safety device: according to applicable standards - paint: according to customer's request - electr. system: new - with frequency converter for adjustable speed - electr. control panel: new - machine wiring: new - general overhauled machine with 1 year warranty, with CE operating and maintenance instructions in English, with CE mark

chamber volume 170 liter︱useable volume -- liter︱friction -- ︱motor drive power 800 kW︱

---

Condition: used - Specification: internal mixer used as additional option: Rubicon batch-off plant - capacity approx.: 170 litres - rotor model: tangential design - drive controller: Allen Breadley - Control: Mitsubishi - Motor speed: 1,000 rpm - Gearbox: Panamax 9000 make Sumitomo - Rotor speed: 5.6 - 55.6 rpm - Chamber hardness: 45 -50 HRC - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz - Moror make: Teco - Output: 27 tons/day - Cycle time approx.: 4 - 8 min - Height approx.: 7,500 mm - Weight approx.: 35,000 kg, incl. gearbox and motor Available as an option: - Batch-off system Make: Rubikon / Mattech - Cooling bars max.: 300 mm / 2x 80 mm

chamber volume 80 liter︱useable volume -- liter︱friction -- ︱motor drive power 390 kW︱

---

Condition: used - overhauled - with warranty Specification: Internal mixer used - Capacity: about 80 lts - Rotors model: tangential type with 3 wings - Command gearbox: semi-unidrive type - Max speed rotors: about 60 rpm - Closing system: drop-door type - Hydraulic unit for drop-door system - Pneumatic hopper for loading material - DC engine: 390 kW - 1500 rpm - 440 V - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules - Warranty: 1 year

chamber volume - liter︱useable volume 1,6 liter︱friction - ︱motor drive power 22 kW︱

---

Condition: used - overhauled Specification: Laboratory internal mixer - second-hand - chamber volume: approx. 1.6 l - closing system: front door with pneumatic piston - plunger: pneumatic - rotor geometry: tangential type - Oil-free self-lubricating sealing rings - New rotary union for water cooling - New main gearbox - New AC motor: 22 kW - Control cabinet: NEW - Control panel with OP 7": NEW - Wiring: NEW - New frequency converter for variable speed - Paintwork: according to customer specifications - With safety devices according to current standard - overhauled, with warranty 12 months, with CE-marking, Operating and maintenance instructions in English

barrel diameter 254 mm︱max. barrel capacity 60 liter︱ram stroke -- mm︱

---

Condition: used, Specification: blank vending machine - second-hand incl. tilting cooling unit Collectacool drive: - Hydraulic pump motor: 11 kW - Cutting motor: 1.1 kW - Vacuum pump motor: 2.2 kW - Heating power: 9 kW - Chamber volume: 60 kg - Cylinder diameter: 254 mm - Largest nozzle diameter: 190 mm - Operating voltage: 3x380 V / 50 Hz (Europe) - Total weight: 3,080 kg - incl. tilting cooling unit: Collectacool

roll diameter 250 mm︱roll length 500 mm︱rolls drilled Kernbohrung ︱nip adjustment mechanisch ︱drive power: kW︱

---

screw ø: 180 mm︱screw length: 30D ︱screw speedl: -- U/min︱drive power: 90 kW︱

---

Condition: used - Specification: plastic granulating line extruder HKS 180-120 with side dosing make Sikoplast Overhauled 2015 - Usage: wetting of carbon fibre - Drive power: 90 kW - L/D ratio: 30 - Screw type: 3-zone screw - Throughput capacity: 80 - 250 kg - Atmospheric degassing: Yes - Vacuum degassing: No - with side dosing: make Sikoplast - Application: Dosing of raw materials into the extruder - Drive power: 11 kW - Speed: 1 - 36 rpm

screw ø: 70 mm︱screw length: 24D ︱screw speedl: -- U/min︱drive power: 70 kW︱

---

condition: used - Specification: Plastic extruder type K70-24D with melting pump and suction conveyor - with Maag melting pump and suction conveyor - Screw diameter: 70 mm - Screw length approx.: 1,680 mm - Length of the snail: 24D - Motor power: 70 kW - Snail geometry: classic polyphine screw, which is designed as a barrier screw. This means with shear and mixing section. - Output approx.: 120 Kg, PP standard - Dimensions W/D/H approx.: 4,000 x 1,200 x 2250 mm Package two approx.: 1,200 x 800 x 1,100 mm

screw ø: 75 mm︱screw length: 33D ︱screw speedl: -- U/min︱drive power: 191 kW︱

---

Condition: used - Specification: single screw plastic extruder type 75-33D completely overhauled, in very good condition - screw diameter: 75 mm - screw length: 33D - output approx.: 350 kg/h - DC motor power: 191 kW - Screw: overhauled, cylinder polished, - electrics: new - Extruder completely overhauled In case of order, the extruder would still be subjected to a test run.

screw ø: 80 mm︱screw length: 30D ︱screw speedl: -- U/min︱drive power: 116 kW︱

---

Condition: used - Specification: single screw plastic extruder type 80-30D completely overhauled, - screw diameter: 80 mm - screw length: 30D - output approx.: 350 kg/h - DC motor power: 116 kW - Electrics: New - Extruder completely overhauled - incl. attached co-extruder In case of order, the extruder would still be subjected to a test run.

screw ø: 60 mm︱screw length: 11D ︱screw speedl: -- U/min︱drive power: 18,5 kW︱

---

Condition: used, overhauled Specification: rubber extruder - used - screw diameter: 60 mm - screw length: 11D - screw length: approx. 660 mm - overhaul of screw and barrel - Overhaul of feed roller and safety cage - New rotary union for water - AC motor: 18.5 kW - New control cabinet with frequency converter for variable speed - New cabling - Pressure and temperature sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Overhauled according to CE-Standard safety regulations Warranty: 1 year Option: 3x temperature control units up to 95°C water temperature Power: 6 kW

screw ø: für Extruder 120 mm︱screw length: -- ︱screw speedl: -- U/min︱drive power: 19,8 kW︱

---