Европейская сеть дилеров складской техники

Категория:
    Производитель:
      Машины:
        Трейдер:

          Mager & Wedemeyer Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe PINACHO ML 18 250 x1000


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-310054 · Center Lathe

          PINACHO - ML 18 250 x1000 - - 2018 -

          Technical details
          turning diameter over bed 502 mm︱turning diameter over slide rest 310 mm︱turning length 1000 mm︱centre height 250 mm︱swing diameter over bed slide 440 mm︱bed width 300 mm︱upper slide travel cross 250 mm︱travel of upper support 130 mm︱spindle nose A2 DIN 55026 Form A ︱spindle bore 58 mm︱transmission ratio 3 ︱spindle turning speed - stepless 40 - 2080 U/min︱tailstock quill taper MT 4 ︱tailstock quill diameter 68 mm︱tailstock quill adjustment 200 mm︱main drive 5,5 kW︱coolant pump 0,1 kW︱turning tool - shaft cross cut 25 x 25 mm︱total power requirement ca. 6 kW︱weight of the machine ca. 1,52 t︱
          demonstration machine
            turning diameter over bed 502 mm
            turning diameter over slide rest 310 mm
            turning length 1000 mm
            centre height 250 mm
            swing diameter over bed slide 440 mm
            bed width 300 mm
            upper slide travel cross 250 mm
            travel of upper support 130 mm
            spindle nose A2 DIN 55026 Form A
            spindle bore 58 mm
            transmission ratio 3
            spindle turning speed - stepless 40 - 2080 U/min
            tailstock quill taper MT 4
            tailstock quill diameter 68 mm
            tailstock quill adjustment 200 mm
            main drive 5,5 kW
            coolant pump 0,1 kW
            turning tool - shaft cross cut 25 x 25 mm
            total power requirement ca. 6 kW
            weight of the machine ca. 1,52 t
            Description :
            demonstration machine
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled PINACHO ST 225x1000


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09171 · Lathe - cycle-controlled

          PINACHO - ST 225x1000 - - 2018 - FAGOR 8055i

          Technical details
          turning diameter 450 mm︱turning length 1000 mm︱control FAGOR 8055i ︱centre height 225 mm︱bed width 300 mm︱spindle head DIN 55026/ Gr.6 ︱turning diameter over bed slide 370 ︱turning dia. over face-slide 260 mm︱spindle bore 65 mm︱spindle turning speed - stepless 1 - 3000 U/min︱tail stock ︱pinole diameter 68 mm︱quill stroke 200 mm︱taper in tailstock-quill MK 4 ︱total power requirement 10 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 2,6 x 1,2 x 1,9 m︱
          Model ST 225x1000 Manufactured according to DIN 8605 Spindle mount A2 DIN 55026 Feed rates Z, X: 0-7500 mm Standard version: Automatic 8-station tool turret VDI30 machine light, complete machine cover with chip tray instruction book, coolant device, servo spindle motor, automatic lubrication of the guides, Electronic handwheels for X and Z axes, CE compliant Accessories: hydraulic chuck Ø 250 pull cylinder with bore Ø 68 Hydraulic rice stick quill VDI 30 tool disc prepared for part catcher Chip conveyor
            turning diameter 450 mm
            turning length 1000 mm
            control FAGOR 8055i
            centre height 225 mm
            bed width 300 mm
            spindle head DIN 55026/ Gr.6
            turning diameter over bed slide 370
            turning dia. over face-slide 260 mm
            spindle bore 65 mm
            spindle turning speed - stepless 1 - 3000 U/min
            pinole diameter 68 mm
            quill stroke 200 mm
            taper in tailstock-quill MK 4
            total power requirement 10 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 2,6 x 1,2 x 1,9 m
            Description :
            Model ST 225x1000
            Manufactured according to DIN 8605
            Spindle mount A2 DIN 55026
            Feed rates Z, X: 0-7500 mm

            Standard version:
            Automatic 8-station tool turret VDI30
            machine light, complete machine cover with chip tray
            instruction book, coolant device,
            servo spindle motor, automatic lubrication of the guides,
            Electronic handwheels for X and Z axes, CE compliant
            Accessories:
            hydraulic chuck Ø 250 pull cylinder with bore Ø 68
            Hydraulic rice stick quill
            VDI 30 tool disc
            prepared for part catcher
            Chip conveyor
          Datasheet
          Request / Contact

          milling machining centers - horizontal

          used  milling machining centers - horizontal MAZAK FH-7800


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09163F · milling machining centers - horizontal

          MAZAK - FH-7800 - - 2001 - PC Fusion 640 M

          Technical details
          x-travel 1050 mm︱y-travel 800 mm︱z-travel 825 mm︱Control PC Fusion 640 M ︱size of pallet 800 x 630 mm︱table load 1,27 t︱table clamping surface: 24 x M16x2, Abstand 125 mm︱swivelling range 0,001° x 360000 Grad︱table height over floor 1250 mm︱Distance spindle nose - palett surface 200 - 1025 mm︱Distance spindle centre - table surface 50 - 850 mm︱feed range 1 - 40000 mm/min︱rapid travel x/y/z 40 m/min︱turning speed range 35 - 10000 U/min︱max. torque on the spindle 525 Nm︱power capacity - milling spindle 37 / 22 kW︱tool taper HSK 100 ︱chain magazin for tools 80 ︱diameter of tools max. 135 mm︱max. tool-dia with free toolbox 260 mm︱
            x-travel 1050 mm
            y-travel 800 mm
            z-travel 825 mm
            Control PC Fusion 640 M
            size of pallet 800 x 630 mm
            table load 1,27 t
            table clamping surface: 24 x M16x2, Abstand 125 mm
            swivelling range 0,001° x 360000 Grad
            table height over floor 1250 mm
            Distance spindle nose - palett s. 200 - 1025 mm
            Distance spindle centre - table . 50 - 850 mm
            feed range 1 - 40000 mm/min
            rapid travel x/y/z 40 m/min
            turning speed range 35 - 10000 U/min
            max. torque on the spindle 525 Nm
            power capacity - milling spindle 37 / 22 kW
            tool taper HSK 100
            chain magazin for tools 80
            diameter of tools max. 135 mm
            max. tool-dia with free toolbox 260 mm
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical MAZAK VCN 510 CII


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09172F · milling machining centers - vertical

          MAZAK - VCN 510 CII - - 2007 - Matrix Nexus

          Technical details
          x-travel 1050 mm︱y-travel 510 mm︱z-travel 510 mm︱control Matrix Nexus ︱spindle taper DIN 69871/SK40 ︱Feed speed max 36 m/min.︱turning speed range 35 - 12.000 U/min︱rapid travel x/y/z 36 m/min︱distance spindle /table max. 660 mm︱distance spindle /table min. 150 mm︱tool change unit ︱no. of tools in the magazine 30 Stück︱tool taper CAT 40 ︱Tool diameter 80 mm︱wotkpiece diameter with 2 vacant positions max. 125 mm︱max. tool weight 8 kg︱max. tool length 350 mm︱change-time chip to chip 2,9 sec︱table: ︱table length 1300 mm︱
          Control: Mazatrol Matrix Nexus Main drive power AC motor 18.5 kW at 5 min nominal power 11 kW at 10 min nominal power 15 kW at 30 min nominal power 7.5 kW with 100% continuous operation Machine color gray / black GENERAL MACHINE OPTIONS - Transformer for the European market - 12.1 ’’ LCD color screen - Mazak (standard paint (black / gray) - Main spindle motor 18.5 kW / 5 min. SAFETY DEVICES - Operator door with locking switch - Workspace cladding - Upper cover to protect against chips and chips thrown out from above Coolant during high-speed operation. - Fully paneled work area COOLANT SUPPLY - Flood cooling pressure 4.5 bar, delivery rate at the pump 30l / min. - Coolant supply through spindle, pressure 5 bar, flow rate at the pump 27l / min. - Complete coolant system, includes pumps, valves, pipes and nozzles MEASURING SYSTEM - Tool length measurement + broken tool detection - automatic tool length measurement CLAMPING TABLE / PALLET - Reference groove for the Y axis in the table CHIP DISPOSAL - Preparation for chip conveyor on the left NUMERICAL CONTROL - User macro (600 variables) - Mazak tapping / drilling cycle Tornado (Mazatrol): By boring and Tapping in helical machining mode different diameters at high speed with just one tool to be edited. This function minimizes programming and processing times - Mazak tapping / drilling cycle Tornado in EIA / ISO - EIA / ISO input function - additional EIA / ISO input function - Helical interpolation - 3D tool correction - Workpiece coordinate rotation - Geometric function - scaling - External data input / output - Reversing time feed G 93 - Optional stop (optional stop): The automatic operation is stopped when the code M01 has been programmed, the menu for optional stop is still displayed inversely. - Background toolpath checking: The toolpath of a program can be checked, even if a different program number is in automatic mode is called and processed. - MAZACC 2D software - additional workpiece coordination systems, 300 pieces - Thread cutting function: The feed of the tool is controlled synchronously for spindle rotation. It can cylindrical. u. conical threads are manufactured. - EIA / ISO drilling cycles - USB interface 2 pieces - LAN interface - intelligent heat shield Sensors determine the current temperature of the machine. A computational comparison of the data takes place on the basis of these values. - intelligent danger sign With this function, machine collisions are avoided during manual operation prevented and thus facilitates the set-up. - MAZAK language support - virtual machining Incl. the following special accessories: - Drilling cycle with torque-dependent chip breaking - Synchronous tapping - Used machine without warranty - - all dimensions, weight and performance specifications are non-binding -
            x-travel 1050 mm
            y-travel 510 mm
            z-travel 510 mm
            control Matrix Nexus
            spindle taper DIN 69871/SK40
            Feed speed max 36 m/min.
            turning speed range 35 - 12.000 U/min
            rapid travel x/y/z 36 m/min
            distance spindle /table max. 660 mm
            distance spindle /table min. 150 mm
            no. of tools in the magazine 30 Stück
            tool taper CAT 40
            Tool diameter 80 mm
            wotkpiece diameter with 2 vacant. max. 125 mm
            max. tool weight 8 kg
            max. tool length 350 mm
            change-time chip to chip 2,9 sec
            table length 1300 mm
            Description :
            Control: Mazatrol Matrix Nexus
            Main drive power AC motor
            18.5 kW at 5 min nominal power
            11 kW at 10 min nominal power
            15 kW at 30 min nominal power
            7.5 kW with 100% continuous operation

            Machine color gray / black

            GENERAL MACHINE OPTIONS
            - Transformer for the European market
            - 12.1 ’’ LCD color screen
            - Mazak (standard paint (black / gray)
            - Main spindle motor 18.5 kW / 5 min.

            SAFETY DEVICES
            - Operator door with locking switch
            - Workspace cladding
            - Upper cover to protect against chips and chips thrown out from above
            Coolant during high-speed operation.
            - Fully paneled work area

            COOLANT SUPPLY
            - Flood cooling pressure 4.5 bar, delivery rate at the pump 30l / min.
            - Coolant supply through spindle, pressure 5 bar, flow rate at the pump 27l /
            min.
            - Complete coolant system, includes pumps, valves, pipes and nozzles

            MEASURING SYSTEM
            - Tool length measurement + broken tool detection
            - automatic tool length measurement

            CLAMPING TABLE / PALLET
            - Reference groove for the Y axis in the table

            CHIP DISPOSAL
            - Preparation for chip conveyor on the left

            NUMERICAL CONTROL
            - User macro (600 variables)

            - Mazak tapping / drilling cycle Tornado (Mazatrol): By boring and
            Tapping in helical machining mode
            different diameters at high speed with just one tool
            to be edited. This function minimizes programming and processing times

            - Mazak tapping / drilling cycle Tornado in EIA / ISO

            - EIA / ISO input function

            - additional EIA / ISO input function
            - Helical interpolation
            - 3D tool correction
            - Workpiece coordinate rotation

            - Geometric function
            - scaling
            - External data input / output

            - Reversing time feed G 93

            - Optional stop (optional stop): The automatic operation is
            stopped when the code M01 has been programmed, the menu for optional stop
            is still displayed inversely.

            - Background toolpath checking: The toolpath of a program can
            be checked, even if a different program number is in automatic mode
            is called and processed.

            - MAZACC 2D software
            - additional workpiece coordination systems, 300 pieces

            - Thread cutting function: The feed of the tool is controlled synchronously
            for spindle rotation. It can cylindrical. u. conical threads are manufactured.

            - EIA / ISO drilling cycles
            - USB interface 2 pieces
            - LAN interface

            - intelligent heat shield
            Sensors determine the current temperature of the machine.
            A computational comparison of the data takes place on the basis of these
            values.

            - intelligent danger sign
            With this function, machine collisions are avoided during manual operation
            prevented and thus facilitates the set-up.

            - MAZAK language support

            - virtual machining

            Incl. the following special accessories:
            - Drilling cycle with torque-dependent chip breaking
            - Synchronous tapping

            - Used machine without warranty -
            - all dimensions, weight and performance specifications are non-binding -
          Datasheet
          Request / Contact

          Band Saw - Automatic - Horizontal

          used  Band Saw - Automatic - Horizontal MEP - VOLLAUTOMAT SHARK 350 NC HS 5.0


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-341080 · Band Saw - Automatic - Horizontal

          MEP - VOLLAUTOMAT - SHARK 350 NC HS 5.0 - - 2019 -Neu- - NC 5.0

          Technical details
          cutting diameter 350 mm︱saw band length 4640 x 34 x 1,1 mm︱cutting width 350 mm︱Control NC 5.0 ︱band speed 15 - 100 m/min︱capacity 90 degrees: square 350 x 350 mm︱table height 860 mm︱total power requirement 4 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 3,1 x 2,2 x 2,2 m︱
          Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column design for 0 ° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: - Driven chip conveyor, can be installed on the right or left of the machine - Clamping pressure regulation of the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw machines, which can also be operated semi- automatically, with the new MEP 50, specially developed by MEP for automatic machines, Windows "CE" based control. Cutting cycle “clean cut” The feeder pushes the workpiece backwards in order to avoid scoring at the cutting surface when the belt moves up again at the end of the cut. - Fieldbus communication system with double microprocessor and serial connection. - The user interface with 7 ”touch screen display and mechanical keys are used for the operating functions of the sawmasc ins, guarantees a reliable, simple and intuitive use, as well as a real-time control of all cutting parameters standard equipment - Shark 350 NC
            cutting diameter 350 mm
            saw band length 4640 x 34 x 1,1 mm
            cutting width 350 mm
            Control NC 5.0
            band speed 15 - 100 m/min
            capacity 90 degrees: square 350 x 350 mm
            table height 860 mm
            total power requirement 4 kW
            weight of the machine ca. 2,8 t
            dimensions of the machine ca. 3,1 x 2,2 x 2,2 m
            Description :
            Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column design
            for 0 ° cuts on solid material and profiles made of steel, stainless steel and
            steel alloys
            up to a maximum of 350x350 mm. The standard equipment includes:
            - Driven chip conveyor, can be installed on the right or left of the machine
            - Clamping pressure regulation of the vices
            - Feeder with vertical rollers for lateral material support
            - Numerically controlled band saw machines, which can also be operated semi-
            automatically,
            with the new MEP 50, specially developed by MEP for automatic machines,
            Windows "CE" based control. Cutting cycle “clean cut” The feeder pushes the
            workpiece
            backwards in order to avoid scoring at the cutting surface when the belt moves
            up again at
            the end of the cut. - Fieldbus communication system with double microprocessor
            and serial connection.
            - The user interface with 7 ”touch screen display and mechanical keys are used
            for the operating functions
            of the sawmasc ins, guarantees a reliable, simple and intuitive use, as well as
            a real-time control of all
            cutting parameters standard equipment - Shark 350 NC
          Datasheet
          Request / Contact
          used  Band Saw - Automatic - Horizontal MEP - VOLLAUTOMAT SHARK 331-1 NC SPIDER 5.0


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-341072 · Band Saw - Automatic - Horizontal

          MEP - VOLLAUTOMAT - SHARK 331-1 NC SPIDER 5.0 - - 2017 -Neu- - Evolution TS 50

          Technical details
          cutting diameter 280 mm︱saw band length 3320 x 27 x 0,9 mm mm︱cutting width 330 mm︱Control Evolution TS 50 ︱band speed 15 - 100 m/min︱capacity 90 degrees: round 280 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170 x 170 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,24 t︱dimensions of the machine ca. 3,3 x 2,83 x 2,23 m︱
            cutting diameter 280 mm
            saw band length 3320 x 27 x 0,9 mm mm
            cutting width 330 mm
            Control Evolution TS 50
            band speed 15 - 100 m/min
            capacity 90 degrees: round 280 mm
            capacity 90 degrees: square 260 x 260 mm
            capacity 90 degrees: flat 330 x 260 mm
            capacity 45 degrees: round 260 mm
            capacity 45 degrees: square 250 mm
            capacity 45 degrees: flat 270 x 200 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            capacity 60 degrees: flat 170 x 170 mm
            total power requirement 2,2 kW
            weight of the machine ca. 1,24 t
            dimensions of the machine ca. 3,3 x 2,83 x 2,23 m
          Datasheet
          Request / Contact

          Section Shear - Combined

          used  Section Shear - Combined PEDDINGHAUS Peddiworker 500


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09166F · Section Shear - Combined

          PEDDINGHAUS - Peddiworker 500 - - 1991 -

          Technical details
          round bar steel 32 mm︱square edge steel 30 mm︱L-beam 80 x 8 mm︱hole punhing press: pressure 50 t︱hole punching press: throat 155 mm︱hole punching press: max. length of stroke 10 - 28 mm︱hole punching press: capacity (dia. x thick.) Ø27 in 14 mm︱work height max. 1024 mm︱shear: flat material 190 x 10 mm︱shear: length of knifes 200 mm︱Working height 705 mm︱adjustment of stroke 10 - 28 mm︱oil volume 40 l︱total power requirement 4 kW︱weight of the machine ca. 0,84 t︱dimensions of the machine ca. 0,65 x 1,2 x 1,67 m︱
          Hydraulic Section Shear - Combined
            round bar steel 32 mm
            square edge steel 30 mm
            L-beam 80 x 8 mm
            hole punhing press: pressure 50 t
            hole punching press: throat 155 mm
            hole punching press: max. length. 10 - 28 mm
            hole punching press: capacity (d. Ø27 in 14 mm
            work height max. 1024 mm
            shear: flat material 190 x 10 mm
            shear: length of knifes 200 mm
            Working height 705 mm
            adjustment of stroke 10 - 28 mm
            oil volume 40 l
            total power requirement 4 kW
            weight of the machine ca. 0,84 t
            dimensions of the machine ca. 0,65 x 1,2 x 1,67 m
            Description :
            Hydraulic Section Shear - Combined
          Datasheet
          Request / Contact
          used  Section Shear - Combined PEDDINGHAUS Peddimaster 60/100 H


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09165F · Section Shear - Combined

          PEDDINGHAUS - Peddimaster 60/100 H - - 1986 -

          Technical details
          round bar steel - mm︱square edge steel - mm︱L-beam 120 x 13 mm︱hole punhing press: pressure 60 t︱hole punching press: throat 510 mm︱hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm︱shear: flat material 500 x 14 mm︱shear: flat material 400 x 16 mm︱shear: flat material 180 x 20 mm︱shear: flat material 120 x 21 mm︱shear: flat material 100 x 22 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 1,8 x 0,9 x 1,8 m︱
          Hydraulic Section Shear - Combined
            round bar steel - mm
            square edge steel - mm
            L-beam 120 x 13 mm
            hole punhing press: pressure 60 t
            hole punching press: throat 510 mm
            hole punching press: capacity (d. Ø 27 in 17 mm
            shear: flat material 500 x 14 mm
            shear: flat material 400 x 16 mm
            shear: flat material 180 x 20 mm
            shear: flat material 120 x 21 mm
            shear: flat material 100 x 22 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 1,8 x 0,9 x 1,8 m
            Description :
            Hydraulic Section Shear - Combined
          Datasheet
          Request / Contact

          Swarf Conveyor

          used  Swarf Conveyor MAYFRAN CleanSweep RM 125


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-196100 · Swarf Conveyor

          MAYFRAN - CleanSweep RM 125 - - 2021 -

          Technical details
          length in total 5108 mm︱band width 370 mm︱conveying height 1100 ︱length in width 880 mm︱weight of the machine ca. 0,7 t︱
          Suitable for Mazak Integrex i400S (T) x 1500 also for Integrex i200S / 300S x 1500
            length in total 5108 mm
            band width 370 mm
            conveying height 1100
            length in width 880 mm
            weight of the machine ca. 0,7 t
            Description :
            Suitable for Mazak Integrex i400S (T) x 1500
            also for Integrex i200S / 300S x 1500
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Mager  &  Wedemeyer Werkzeugmaschinen GmbH  28309 Bremen Europaallee 24a Deutschland


          Contact Trader


            Mager & Wedemeyer Werkzeugmaschinen GmbH
           Europaallee 24a
            28309 Bremen
            Deutschland
            +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
            jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
            Contact person:

           




          Machine category


          Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · Drehmaschine - zyklengesteuert · Leit- und Zugspindeldrehmaschine · Profilstahlschere - Kombiniert · Späneförderer ·