Европейская сеть дилеров складской техники

Категория:
    Производитель:
      Машины:
        Трейдер:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC turning and milling center vertical

          used Lathes CNC turning and milling center vertical UNISIGN Unicom 6000


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03110 · CNC turning and milling center vertical

          UNISIGN - Unicom 6000 - - 2008 - Siemens 840 D

          Technical details
          turning diameter 1800 mm︱turning length . mm︱control Siemens 840 D ︱faceplate diameter 1800 mm︱swing diameter 2000 mm︱turning height ca. 1200 mm︱x-travel 2150 mm︱y-travel 1425 mm︱z-travel 1000 mm︱Passage height 1330 mm︱interference diameter 2000 mm︱total power requirement 130 kVA︱weight of the machine ca. 45 t︱
          Equipment / Accessories: - Automatic pallet changer for 3 pallets, drive power of face plate: 70 kW, max. 300 rpm, max. torque 25,000 Nm 3 pallet sizes: 1 x Ø 1800 mm raised version, 2 x Ø 1800 mm each with 4 claw boxes type DS alignment station - Vertical main spindle unit: speed 0-6000 rpm, 36 kW, 720 Nm tool holder HSK 100 - Universal angle drilling and milling head: speed 0-6000 rpm, 36 kW, 720 Nm tool holder HSK 100 division 2.5° - Angular drilling and milling head: speed 0-6000 rpm, 36 kW, 720 Nm tool holder HSK 100 division 2.5° - Grinding device - Turning tool holder HSK 100 tool changer for spindle, universal milling head and turning tools from 2 chain magazines with 141 storage stations - Coolant supply and filter system with high pressure pump up to 50 bar, internal coolant supply and external coolant supply - Chip conveyor - Integrated measuring probe on a separate slide - Radio probe - Brankamp collision monitoring - Interior extraction - Electronic handwheel
            turning diameter 1800 mm
            turning length . mm
            control Siemens 840 D
            faceplate diameter 1800 mm
            swing diameter 2000 mm
            turning height ca. 1200 mm
            x-travel 2150 mm
            y-travel 1425 mm
            z-travel 1000 mm
            Passage height 1330 mm
            interference diameter 2000 mm
            total power requirement 130 kVA
            weight of the machine ca. 45 t
            Description :
            Equipment / Accessories:
            - Automatic pallet changer for 3 pallets,
            drive power of face plate: 70 kW, max. 300 rpm,
            max. torque 25,000 Nm
            3 pallet sizes: 1 x Ø 1800 mm raised version,
            2 x Ø 1800 mm each with 4 claw boxes type DS
            alignment station
            - Vertical main spindle unit:
            speed 0-6000 rpm, 36 kW, 720 Nm
            tool holder HSK 100
            - Universal angle drilling and milling head:
            speed 0-6000 rpm, 36 kW, 720 Nm
            tool holder HSK 100
            division 2.5°
            - Angular drilling and milling head:
            speed 0-6000 rpm, 36 kW, 720 Nm
            tool holder HSK 100
            division 2.5°
            - Grinding device
            - Turning tool holder HSK 100
            tool changer for spindle, universal milling head and turning tools
            from 2 chain magazines with 141 storage stations
            - Coolant supply and filter system with high pressure pump up to 50 bar,
            internal coolant supply and external coolant supply
            - Chip conveyor
            - Integrated measuring probe on a separate slide
            - Radio probe
            - Brankamp collision monitoring
            - Interior extraction
            - Electronic handwheel
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center DMG MORI ALX 2000 MC / 500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8765 · CNC Turning- and Milling Center

          DMG MORI - ALX 2000 MC / 500 - - 2020 - M 730 UM SLIMLine

          Technical details
          turning diameter max. 366 mm︱turning length 517 mm︱control M 730 UM SLIMLine︱Main spindle: ︱turning speed range - main spindle max. 4.500 min/-1︱power capacity - main spindel 22 / 15 / 11 kW︱spindle nose JIS A-6 ︱spindle bearing diameter 120 mm︱spindle bore 73 mm︱max. usable bar diameter 65 mm︱C-Axis 0,001 °︱chucking diameter max. 250 mm︱axis stroke: ︱x-travel 250 mm︱z-travel 575 mm︱C-Axis 360 °︱feeds: ︱rapid traverse ( X / Y / Z ) 30 / - / 30 m/min︱rapid traverse C-axis 400 min/-1︱turret:
          CNC - Turning- and MillingCenter DMG MORI - ALX 2000 MC / 500 - TOP-Condition - only few operating-hours! - C-Axis - Tool-Drive - Tailstock - Operating-Hours: Power-On: ca. 385h / Spindle-Runtime: ca. 190h
            turning diameter max. 366 mm
            turning length 517 mm
            control M 730 UM SLIMLine
            turning speed range - main spind. max. 4.500 min/-1
            power capacity - main spindel 22 / 15 / 11 kW
            spindle nose JIS A-6
            spindle bearing diameter 120 mm
            spindle bore 73 mm
            max. usable bar diameter 65 mm
            C-Axis 0,001 °
            chucking diameter max. 250 mm
            x-travel 250 mm
            z-travel 575 mm
            C-Axis 360 °
            rapid traverse ( X / Y / Z ) 30 / - / 30 m/min
            rapid traverse C-axis 400 min/-1
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - ALX 2000 MC / 500

            - TOP-Condition - only few operating-hours!
            - C-Axis
            - Tool-Drive
            - Tailstock
            - Operating-Hours: Power-On: ca. 385h / Spindle-Runtime: ca. 190h



          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center OPTIMUM OPTIturn S 600 CNC


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8702 · CNC Turning- and Milling Center

          OPTIMUM - OPTIturn S 600 CNC - - 2020 - Sinumerik 828D Siemens

          Technical details
          turning diameter max. 500 mm︱turning length 460 mm︱control Sinumerik 828D Siemens︱greates pass round over bed 500 mm︱Swing dia. over traverse guideway 220 mm︱standard turning dia. 215 mm︱Main spindle: ︱turning speed range - main spindle 10 - 4.000 min/-1︱power capacity - main spindel 30 / 12 kW︱max. Torque 250 / 115 Nm︱C-Axis 360 °︱spindle taper DIN 55026 / A2-6 ︱spindle bore 75 mm︱max. usable bar diameter 65 mm︱chucking diameter 215 mm︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱tool taper VDI 30 ︱Shank diameter 25 x 25 mm︱
          CNC-Turning- and MillingCenter OPTIMUM - OPTIturn S 600 CNC - NEW MACHINE / SHOW-ROOM-MACHINE - C-Axis - Tool-Drive - alternative configuration available, optional and on request !
            turning diameter max. 500 mm
            turning length 460 mm
            control Sinumerik 828D Siemens
            greates pass round over bed 500 mm
            Swing dia. over traverse guidewa. 220 mm
            standard turning dia. 215 mm
            turning speed range - main spind. 10 - 4.000 min/-1
            power capacity - main spindel 30 / 12 kW
            max. Torque 250 / 115 Nm
            C-Axis 360 °
            spindle taper DIN 55026 / A2-6
            spindle bore 75 mm
            max. usable bar diameter 65 mm
            chucking diameter 215 mm
            number of toolpositions 12 pos.
            Number of driven toolspositions 12 pos.
            tool taper VDI 30
            Shank diameter 25 x 25 mm
            Description :
            CNC-Turning- and MillingCenter
            OPTIMUM - OPTIturn S 600 CNC

            - NEW MACHINE / SHOW-ROOM-MACHINE
            - C-Axis
            - Tool-Drive

            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center SPINNER TC600 65MC


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J580 · CNC Turning- and Milling Center

          SPINNER - TC600 65MC - - 2019 - FANUC 32iTB

          Technical details
          turning diameter 400 mm︱turning length 650 mm︱control FANUC 32iTB ︱greates pass round over bed 600 mm︱spindle turning speed range -4000 U/min︱turret head 16pos ︱taper in tailstock MT 4 ︱weight of the machine ca. 6.8 t︱
          Condition: As new ! Turret with 16 driven positions Bar feeder SPINNER Servo 80-1500 More details on www.marcels-maschinen.ch
            turning diameter 400 mm
            turning length 650 mm
            control FANUC 32iTB
            greates pass round over bed 600 mm
            spindle turning speed range -4000 U/min
            turret head 16pos
            taper in tailstock MT 4
            weight of the machine ca. 6.8 t
            Description :
            Condition: As new !
            Turret with 16 driven positions
            Bar feeder SPINNER Servo 80-1500

            More details on www.marcels-maschinen.ch
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center HWACHEON HI-TECH 850 MC


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41340 · CNC Turning- and Milling Center

          HWACHEON - HI-TECH 850 MC - - 2018 - FANUC

          Technical details
          turning diameter 920 mm︱turning length 2500 mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 1 ︱- number of turrets 1 ︱- live positions: yes ︱- number of c-axes 1 ︱- number of y-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 920 mm︱- bar diameter (max) 164 mm︱- worpiece length max. 2500 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 1500 /min︱- number of gears 4 ︱- drive power 45 kW︱- spindle torque 6873 Nm︱- spindle bore diameter 164 mm︱
          Spindelhoures 1700h (TOP CONDITION) - incl. all tool holders i.e. driven and angle head (unused) - Software for tool wear - Belt filter system (including additional tank) - 2-stage high pressure pump (10/30 bar) - Glass ruler in BMT 85 - Support for automatic bezel - BMT 85 tool turret
            turning diameter 920 mm
            turning length 2500 mm
            - number of spindles 1
            - number of turrets 1
            - live positions: yes
            - number of c-axes 1
            - number of y-axes 1
            - turning diameter (max) 920 mm
            - bar diameter (max) 164 mm
            - worpiece length max. 2500 mm
            - spindle revolutions (max) 1500 /min
            - number of gears 4
            - drive power 45 kW
            - spindle torque 6873 Nm
            - spindle bore diameter 164 mm
            Description :
            Spindelhoures 1700h (TOP CONDITION)

            - incl. all tool holders
            i.e. driven and angle head (unused)
            - Software for tool wear
            - Belt filter system (including additional tank)
            - 2-stage high pressure pump (10/30 bar)
            - Glass ruler in BMT 85
            - Support for automatic bezel
            - BMT 85 tool turret
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2000 SY / 500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8488 · CNC Turning- and Milling Center

          DMG MORI - NLX 2000 SY / 500 - - 2018 - M 730 UM CELOS

          Technical details
          turning diameter max. 366 mm︱turning length 510 mm︱control M 730 UM CELOS︱greates pass round over bed 923,8 mm︱Swing dia. over traverse guideway 755 mm︱standard turning dia. 275 mm︱distance between spindles 500 mm︱Main spindle: ︱turning speed range - main spindle 5.000 min/-1︱power capacity - main spindel 15 / 11 kW︱spindle nose JIS A-6 ︱spindle bearing diameter 120 mm︱spindle bore 73 mm︱max. bar capacity 65 mm︱usable bar diameter ( - ) mm︱C-Axis 0,001 °︱chucking diameter 200 mm︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱
          CNC - Turning- and MillingCenter DMG MORI - NLX 2000 SY / 500 - Subspindle - C-Axis - Y-Axis - Tool-Drive - Only 600h Operating-Hours
            turning diameter max. 366 mm
            turning length 510 mm
            control M 730 UM CELOS
            greates pass round over bed 923,8 mm
            Swing dia. over traverse guidewa. 755 mm
            standard turning dia. 275 mm
            distance between spindles 500 mm
            turning speed range - main spind. 5.000 min/-1
            power capacity - main spindel 15 / 11 kW
            spindle nose JIS A-6
            spindle bearing diameter 120 mm
            spindle bore 73 mm
            max. bar capacity 65 mm
            usable bar diameter ( - ) mm
            C-Axis 0,001 °
            chucking diameter 200 mm
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - NLX 2000 SY / 500

            - Subspindle
            - C-Axis
            - Y-Axis
            - Tool-Drive

            - Only 600h Operating-Hours


          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center EMAG VL4 MY


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J573 · CNC Turning- and Milling Center

          EMAG - VL4 MY - - 2018 - FANUC 31i / 31iB

          Technical details
          turning diameter 200 mm︱turning length 200 mm︱control FANUC 31i / 31iB ︱swing diameter 280 mm︱turret head 12 pos ︱weight of the machine ca. 10 t︱
          As new with approx 400 working hours Turret head with 12 driven stations Y-Axis Workpiece charging and discharging station Coolant through spindle Tool measuring device Misc accessories Mehr Informationen auf www.marcels-maschinen.ch
            turning diameter 200 mm
            turning length 200 mm
            control FANUC 31i / 31iB
            swing diameter 280 mm
            turret head 12 pos
            weight of the machine ca. 10 t
            Description :
            As new with approx 400 working hours

            Turret head with 12 driven stations
            Y-Axis
            Workpiece charging and discharging station
            Coolant through spindle
            Tool measuring device
            Misc accessories

            Mehr Informationen auf www.marcels-maschinen.ch
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center SPINNER TTS-65 TRIPLEX


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42175 · CNC Turning- and Milling Center

          SPINNER - TTS-65 TRIPLEX - - 2017 - SIEMENS 840 D SOLUTIONLINE

          Technical details
          turning diameter mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- number of turrets 3 ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 2 ︱WORKING RANGE TURNING ︱- bar diameter (max) 65 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 5000 /min︱- spindle bore diameter 65 mm︱COUNTER SPINDLE ︱- spindle revolutions (max) 7000 /min︱- c-axis: yes ︱X/Z SLIDE ︱- X-axis travel 180 mm︱
          Condition: 7610h power on hours ( was only 1-2 years in use) Equipment: - 3 turrets with 12 tool positions each ( all driven ) - 2 Y-axes ±45mm (overhead) - internal cooling max. 20bar (emulsion) - Software with tool breakage monitoring - 3 channel simulation - mechanical part ejector - approx. 40 tool holders (partly as good as new) - suction system not in the offer
            turning diameter mm
            turning length mm
            - number of spindles 2
            - number of turrets 3
            - live positions: yes
            - number of c-axes 2
            - number of y-axes 2
            - bar diameter (max) 65 mm
            - spindle revolutions (max) 5000 /min
            - spindle bore diameter 65 mm
            - spindle revolutions (max) 7000 /min
            - c-axis: yes
            - X-axis travel 180 mm
            Description :
            Condition:
            7610h power on hours
            ( was only 1-2 years in use)

            Equipment:
            - 3 turrets with 12 tool positions each ( all driven )
            - 2 Y-axes ±45mm (overhead)
            - internal cooling max. 20bar (emulsion)
            - Software with tool breakage monitoring
            - 3 channel simulation
            - mechanical part ejector
            - approx. 40 tool holders (partly as good as new)
            - suction system not in the offer
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NTX1000/SZM 2nd Generation


          • KARAT Werkzeugmaschinen GmbH
          • Lily-Braun-Straße 45
          • 40699 Erkrath
          • Deutschland

          • 02104 / 138 59 30
            02104 / 138 59 31
          • info@karat-maschinen.de
            www.karat-maschinen.de
          #1097-10138 · CNC Turning- and Milling Center

          DMG MORI - NTX1000/SZM 2nd Generation - - 2017 - SIEMENS 840D-SL

          Technical details
          turning diameter 430 mm︱turning length 800 mm︱control SIEMENS 840D-SL ︱greates pass round over bed 450 mm︱bar capacity 52 mm︱main spindle speeds: 1 - 6000 rpm︱sub spindle speeds: 1 - 6000 rpm︱turning and milling spindle ︱tool taper Capto C5 ︱spindle turning speed - stepless 1 - 12.000 U/min︱power capacity - milling spindle 9,5 / 5,5 kW︱adjustment of the milling spindle +/- 120 Grad︱tool magazin: ︱no. of tools in the magazine 76 Stück︱tool length - max. 250 mm︱tool diameter 70 mm︱weight of tools max. 5 kg︱total power requirement kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 4,6 x 2,6 x 2,6 m︱
          CNC turning and milling center in first class condition with cnc control SIEMENS 840D-SL with CELOS - sub spindle - lower turret with 10 station - five axis simultaneously process possible - C-Axis for main- and sub spindle - parts catcher - collection container for finish parts - pre arrangement for bar magazin (LNS - IF) - pre arrangement - filtration systems for cooling lubricant mist - tool magazin with 76 station - 3 jaw chucks for main and sub spindle - touch probe for tool measuring - RENISHAW RMP60 measuring system - chip conveyor - oil mist separator - high pressure cooling unit 8/70/ bar with paper belt filter system - spray gun for coolant - DMG MORI Messenger The machine can be inspected under power!
            turning diameter 430 mm
            turning length 800 mm
            control SIEMENS 840D-SL
            greates pass round over bed 450 mm
            bar capacity 52 mm
            main spindle speeds: 1 - 6000 rpm
            sub spindle speeds: 1 - 6000 rpm
            tool taper Capto C5
            spindle turning speed - stepless 1 - 12.000 U/min
            power capacity - milling spindle 9,5 / 5,5 kW
            adjustment of the milling spindl. +/- 120 Grad
            no. of tools in the magazine 76 Stück
            tool length - max. 250 mm
            tool diameter 70 mm
            weight of tools max. 5 kg
            weight of the machine ca. 10 t
            dimensions of the machine ca. 4,6 x 2,6 x 2,6 m
            Description :
            CNC turning and milling center in first class condition with cnc control
            SIEMENS 840D-SL with CELOS
            - sub spindle
            - lower turret with 10 station
            - five axis simultaneously process possible
            - C-Axis for main- and sub spindle
            - parts catcher
            - collection container for finish parts
            - pre arrangement for bar magazin (LNS - IF)
            - pre arrangement - filtration systems for cooling lubricant mist
            - tool magazin with 76 station
            - 3 jaw chucks for main and sub spindle
            - touch probe for tool measuring
            - RENISHAW RMP60 measuring system
            - chip conveyor
            - oil mist separator
            - high pressure cooling unit 8/70/ bar with paper belt filter system
            - spray gun for coolant
            - DMG MORI Messenger

            The machine can be inspected under power!
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2500 SY / 700


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8794 · CNC Turning- and Milling Center

          DMG MORI - NLX 2500 SY / 700 - - 2017 - M730 UM CELOS

          Technical details
          turning diameter max. 356 mm︱turning length 705 mm︱control M730 UM CELOS︱greates pass round over bed 920 mm︱Swing dia. over traverse guideway 742 mm︱Main spindle: ︱turning speed range - main spindle 4.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱spindle nose JIS A-8 ︱spindle bore 91 mm︱max. usable bar diameter 80 mm︱C-Axis 0,001 °︱chucking diameter Kitagawa BB 210 ︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱spindle bore 73 mm︱usable bar diameter 45 mm︱C-Axis 0,001 °︱chucking diameter Kitagawa BB 206
          CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - Y-Axis
            turning diameter max. 356 mm
            turning length 705 mm
            control M730 UM CELOS
            greates pass round over bed 920 mm
            Swing dia. over traverse guidewa. 742 mm
            turning speed range - main spind. 4.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            spindle nose JIS A-8
            spindle bore 91 mm
            max. usable bar diameter 80 mm
            C-Axis 0,001 °
            chucking diameter Kitagawa BB 210
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            spindle bore 73 mm
            usable bar diameter 45 mm
            C-Axis 0,001 °
            chucking diameter Kitagawa BB 206
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - NLX 2500 SY / 700

            - Subspindle
            - Tool-Drive
            - Y-Axis

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAIER MLK 36D


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-39768 · CNC Turning- and Milling Center

          MAIER - MLK 36D - - 2016 - SIEMENS 840 D

          Technical details
          turning diameter 36 mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 3 ︱WORKING RANGE TURNING ︱- turning diameter (max) 36 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 6000 /min︱- spindle positioning 5 °︱- c-axis: yes ︱COUNTER SPINDLE ︱- spindle revolutions (max) 6000 /min︱- spindle positioning 5 °︱- c-axis: yes ︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 25.7 kW︱- mains voltage 400 V︱- mains frequency 50 Hz︱
            turning diameter 36 mm
            turning length mm
            - number of spindles 3
            - turning diameter (max) 36 mm
            - spindle revolutions (max) 6000 /min
            - spindle positioning 5 °
            - c-axis: yes
            - spindle revolutions (max) 6000 /min
            - spindle positioning 5 °
            - c-axis: yes
            - total power consumption 25.7 kW
            - mains voltage 400 V
            - mains frequency 50 Hz
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center HWACHEON C1 YSMC


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-1611005 · CNC Turning- and Milling Center

          HWACHEON - C1 YSMC - - 2016 - Fanuc 0i

          Technical details
          turning diameter 150 mm︱turning length 599 mm︱control Fanuc 0i ︱travel -x axis 310 mm︱travel -y axis 100 mm︱travel -z axis 700 mm︱Main spindle: 11 / 7,5 kW︱spindle turning speed range ~ 6.000 U/min︱rapid traverse ( X / Y / Z ) 30/15/30 m/min︱tool taper BMT-55/C4 ︱turning length max. 599 mm︱chucking diameter 155 mm︱bar diameter 51 mm︱Subspindle 7,5 / 5,5 kW︱spindle turning speed range ~ 6.000 U/min︱weight of the machine ca. 5,0 t︱
          CNC Turning- and Milling Center Demo Machine HWACHEON C1 YSMC Horizontal turning centre for chuck sizes of Ø150 mm and tool magazine Ideal for complex workpieces in small batches - for maximum flexibility. Thanks to its travelling column design, with its orthogonal X, Y and Z axes, the C1 unifies the machining characteristics of a lathe with the fabrication characteristics of a machining centre. This means that workpieces with complex contours can also be machined to an exceptional level of precision. At the same time, a sub spindle allows two machining steps to be carried out without clamping errors. Features: Linear guideway Y-Axis Driven tools Sub spindle Extra tool magazin Fanuc Manual Guide Horizontal turning centre for chuck sizes of Ø150 mm and tool magazine Ideal for complex workpieces in small batches - for maximum flexibility. Thanks to its travelling column design, with its orthogonal X, Y and Z axes, the C1 unifies the machining characteristics of a lathe with the fabrication characteristics of a machining centre. This means that workpieces with complex contours can also be machined to an exceptional level of precision. At the same time, a sub spindle allows two machining steps to be carried out without clamping errors. Additional tool magazine with 12 positions The particularly robust 18-position turret (BMT-55 und C4) with driven tools does not have a sensitive spindle bearing, as is the case with turning and milling centres, and is therefore outstandingly well-suited to heavy cutting tasks, and carrying out such tasks with short cycle times. In addition, the machine has a 12-position wheel magazine with Capto-C4 holders which can be equipped with different tools during main time, so that all turning and milling tasks can be carried out in one operation, without interruption. Whilst a process is still running, and machining is still underway, the machine can thus be set up for the next workpiece. High rigidity linear rolling guideways permit rapid traverse speeds, dynamic machining and reduce non-productive time. Due to the high quality of the components used and the thermal stability of the new turning centre, high precision is ensured even during high-speed processes carried out in round-the- clock operation.
            turning diameter 150 mm
            turning length 599 mm
            control Fanuc 0i
            travel -x axis 310 mm
            travel -y axis 100 mm
            travel -z axis 700 mm
            Main spindle: 11 / 7,5 kW
            spindle turning speed range ~ 6.000 U/min
            rapid traverse ( X / Y / Z ) 30/15/30 m/min
            tool taper BMT-55/C4
            turning length max. 599 mm
            chucking diameter 155 mm
            bar diameter 51 mm
            Subspindle 7,5 / 5,5 kW
            spindle turning speed range ~ 6.000 U/min
            weight of the machine ca. 5,0 t
            Description :
            CNC Turning- and Milling Center

            Demo Machine

            HWACHEON C1 YSMC

            Horizontal turning centre for chuck sizes of Ø150 mm and tool magazine

            Ideal for complex workpieces in small batches - for maximum flexibility. Thanks
            to its travelling column design, with its orthogonal X, Y and Z axes, the C1
            unifies the machining characteristics of a lathe with the fabrication
            characteristics of a machining centre. This means that workpieces with complex
            contours can also be machined to an exceptional level of precision. At the same
            time, a sub spindle allows two machining steps to be carried out without
            clamping errors.

            Features:
            Linear guideway
            Y-Axis
            Driven tools
            Sub spindle
            Extra tool magazin
            Fanuc Manual Guide


            Horizontal turning centre for chuck sizes of Ø150 mm and tool magazine

            Ideal for complex workpieces in small batches - for maximum flexibility. Thanks
            to its travelling column design, with its orthogonal X, Y and Z axes, the C1
            unifies the machining characteristics of a lathe with the fabrication
            characteristics of a machining centre. This means that workpieces with complex
            contours can also be machined to an exceptional level of precision. At the same
            time, a sub spindle allows two machining steps to be carried out without
            clamping errors.

            Additional tool magazine with 12 positions

            The particularly robust 18-position turret (BMT-55 und C4) with driven tools
            does not have a sensitive spindle bearing, as is the case with turning and
            milling centres, and is therefore outstandingly well-suited to heavy cutting
            tasks, and carrying out such tasks with short cycle times. In addition, the
            machine has a 12-position wheel magazine with Capto-C4 holders which can be
            equipped with different tools during main time, so that all turning and milling
            tasks can be carried out in one operation, without interruption. Whilst a
            process is still running, and machining is still underway, the machine can thus
            be set up for the next workpiece.

            High rigidity linear rolling guideways permit rapid traverse speeds, dynamic
            machining and reduce non-productive time. Due to the high quality of the
            components used and the thermal stability of the new turning centre, high
            precision is ensured even during high-speed processes carried out in round-the-
            clock operation.

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG-MORI EcoTurn 450 V3


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18177 · CNC Turning- and Milling Center

          DMG-MORI - EcoTurn 450 V3 - - 2016 - Siemens 840 D SL SHOPTURN

          Technical details
          turning diameter 400 mm︱turning length 600 mm︱control Siemens 840 D SL SHOPTURN ︱turning dia. over face-slide 480 mm︱turning speeds 4000 1/min︱spindle 17,5 / 12,5 kW︱turret head 12 pos.︱turret head drive 4,2 kW︱rotational speed range of tools 4000 1/min︱tailstock quill taper MT 5 ︱quill stroke 500 mm︱rapid travel x/y/z 30 m/min︱bar capacity 65 mm︱workpiece weight max. 800 kg︱total power requirement 27 kVA︱weight of the machine ca. 5,8 t︱
          equipped with: - Siemens 840D SL - 12 driven tools (VDI 40) - Chip conveyor - Tailstock - 3 jaw chuck dia 250mm - Coolant pump 12bar
            turning diameter 400 mm
            turning length 600 mm
            control Siemens 840 D SL SHOPTURN
            turning dia. over face-slide 480 mm
            turning speeds 4000 1/min
            spindle 17,5 / 12,5 kW
            turret head 12 pos.
            turret head drive 4,2 kW
            rotational speed range of tools 4000 1/min
            tailstock quill taper MT 5
            quill stroke 500 mm
            rapid travel x/y/z 30 m/min
            bar capacity 65 mm
            workpiece weight max. 800 kg
            total power requirement 27 kVA
            weight of the machine ca. 5,8 t
            Description :
            equipped with:
            - Siemens 840D SL
            - 12 driven tools (VDI 40)
            - Chip conveyor
            - Tailstock
            - 3 jaw chuck dia 250mm
            - Coolant pump 12bar


          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN daewoo PUMA  3100 lm


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03186 · CNC Turning- and Milling Center

          DOOSAN daewoo - PUMA 3100 lm - - 2015 - FANUC

          Technical details
          turning diameter 420 mm︱turning length 1280 mm︱control FANUC ︱travel -x axis 300 mm︱travel -z axis 1300 mm︱rapid travel - longitudinal/face 24 m/min︱c-axis 20 min-¹︱spindle bore diameter 86 mm︱spindle drive 22 KW kW︱milling spindle motor 7.5 kW︱spindle speed: 2800 RPM min-¹︱Number tool positions lower turret 12 ︱Stations which are driven 12 ︱total power requirement ca 40 kVA︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. 3.5 x 2.3 x 2.2 m︱
          PUMA 3100 LM - Control FANUC - Spindle bore 102 - SPINDEL 1 CHUCK 305 MM 22 KW 2800 RPM - The machine has 1280 mm turn length - Bal screw instead of Rack and Pineon turret has 12 POSITION Swarf conveyor - High preassure coolant pump 7 bar STAEDY DIA 30-245 MM
            turning diameter 420 mm
            turning length 1280 mm
            control FANUC
            travel -x axis 300 mm
            travel -z axis 1300 mm
            rapid travel - longitudinal/face 24 m/min
            c-axis 20 min-¹
            spindle bore diameter 86 mm
            spindle drive 22 KW kW
            milling spindle motor 7.5 kW
            spindle speed: 2800 RPM min-¹
            Number tool positions lower turr. 12
            Stations which are driven 12
            total power requirement ca 40 kVA
            weight of the machine ca. 7000 kg
            dimensions of the machine ca. 3.5 x 2.3 x 2.2 m
            Description :
            PUMA 3100 LM
            - Control FANUC
            - Spindle bore 102
            - SPINDEL 1 CHUCK 305 MM 22 KW 2800 RPM
            - The machine has 1280 mm turn length
            - Bal screw instead of Rack and Pineon
            turret has 12 POSITION
            Swarf conveyor
            - High preassure coolant pump 7 bar
            STAEDY DIA 30-245 MM
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG-MORI SEIKI NT 4250 / 1500 S


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17609 · CNC Turning- and Milling Center

          DMG-MORI SEIKI - NT 4250 / 1500 S - - 2015 - F31i A5

          Technical details
          turning diameter 660 / 350 mm︱turning length 1542 mm︱control F31i A5 ︱swing diameter max. 730 mm︱Main spindle: ︱Max. rpm 4000 min/-1︱transmission ratio 2 ︱power capacity - main spindel 26 / 22 kW︱Bar feed 80 mm︱usable bar diameter 80 mm︱spindle nose JIS A2-8 ︱C-Axis 0,001 °︱chucking diameter 300 mm︱Subspindel: ︱Max. rpm 4000 min/-1︱transmission ratio 2 ︱power capacity - Sub spindle 26 / 22 kW︱Bar feed max. 80 mm︱usable bar diameter 80 mm︱spindle nose JIS A2-8
          equipped with: - CNC Control F31i A5 - (Spindle 1) KITAGAWA 12" Hollow Chuck - (Spindle 2) KITAGAWA 12" Hollow Chuck - Tool spindle full indexing specifications - Spindle 2 tailstock specifications - Tool storage capacity 40 tools(Capto C6) - Coolant gun - Super-high pressure coolant system(7.0MPa) - Coolant cooling system (separate type) - Mist collector I/F(duct only, dia.200mm) - Chip conveyor (right discharge, hinge type)(/1500) - In-machine workpiece tool presetter for tool spindle(in-out type) - Direct scal feedback for X-axis(tool spindle) - Direct scal feedback for Y-axis(tool spindle) - Direct scal feedback for Z-axis(tool spindle)(/1500) - Chuck foot switch(double) for Main and Counter spindle - Signal lower 3 layers(Red, yellow, green) LED type - Total counter - Manual pulse generator(separate type) - Cooling unit for electrical cabinet - Programming resolution mutipiled by 1/10 - Memory card for Data server(CF card 1 GB) - Playback - Spindle 1 hobbing function - Automatic corner override - Coordinate system rotation - Addition of optional block skip (soft key type 2-9) - Direct drawing dimension programming - Interruption type custom macro - Tool offsets 480 sets in total - KCs mark 65kVA E30373 EMC(including cable) - Invo-Milling package Capto C6 CE-Sign and only 5h (!!) Working Hours
            turning diameter 660 / 350 mm
            turning length 1542 mm
            control F31i A5
            swing diameter max. 730 mm
            Max. rpm 4000 min/-1
            transmission ratio 2
            power capacity - main spindel 26 / 22 kW
            Bar feed 80 mm
            usable bar diameter 80 mm
            spindle nose JIS A2-8
            C-Axis 0,001 °
            chucking diameter 300 mm
            Max. rpm 4000 min/-1
            transmission ratio 2
            power capacity - Sub spindle 26 / 22 kW
            Bar feed max. 80 mm
            usable bar diameter 80 mm
            spindle nose JIS A2-8
            Description :
            equipped with:
            - CNC Control F31i A5

            - (Spindle 1) KITAGAWA 12" Hollow Chuck
            - (Spindle 2) KITAGAWA 12" Hollow Chuck
            - Tool spindle full indexing specifications
            - Spindle 2 tailstock specifications
            - Tool storage capacity 40 tools(Capto C6)
            - Coolant gun
            - Super-high pressure coolant system(7.0MPa)
            - Coolant cooling system (separate type)
            - Mist collector I/F(duct only, dia.200mm)
            - Chip conveyor (right discharge, hinge type)(/1500)
            - In-machine workpiece tool presetter for tool spindle(in-out type)
            - Direct scal feedback for X-axis(tool spindle)
            - Direct scal feedback for Y-axis(tool spindle)
            - Direct scal feedback for Z-axis(tool spindle)(/1500)
            - Chuck foot switch(double) for Main and Counter spindle
            - Signal lower 3 layers(Red, yellow, green) LED type
            - Total counter
            - Manual pulse generator(separate type)
            - Cooling unit for electrical cabinet
            - Programming resolution mutipiled by 1/10
            - Memory card for Data server(CF card 1 GB)
            - Playback
            - Spindle 1 hobbing function
            - Automatic corner override
            - Coordinate system rotation
            - Addition of optional block skip (soft key type 2-9)
            - Direct drawing dimension programming
            - Interruption type custom macro
            - Tool offsets 480 sets in total
            - KCs mark 65kVA E30373 EMC(including cable)
            - Invo-Milling package Capto C6

            CE-Sign and only 5h (!!) Working Hours

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center TAKISAWA TCY 200Y L5


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18498 · CNC Turning- and Milling Center

          TAKISAWA - TCY 200Y L5 - - 2015 - Fanuc 32i-B

          Technical details
          turning diameter 220 mm︱turning length 454 mm︱control Fanuc 32i-B ︱swing dia. mm︱turning speed range - spindle 3200 U/min︱spindle motor 7.5/5.5 kW︱spindle bore 51 mm︱Turret 1 ︱Spindle speed driven tools 0-6000 min -1︱drive capacity - spindle motor 3.7/2.2 kW︱Traverse X-Axis 1 mm︱Traverse Z-Axis 1 mm︱rapid traverse X-axis 20 m/min︱rapid traverse Z-axis 24 m/min︱travel -y axis +50 / -50 mm︱rapid motion - y-axis 10 m/min︱tool change unit 12-fach (VDI 40) ︱total power requirement kVA︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 2,9 ×1,8 x 1,7 m︱
          equipped with: - CNC control FANUC 32i-B - 3-jaw Chuck SMW AutoBlok (210mm) - C-Axe / Y-Axe - Drive tool Holder: 2 pcs radial, 2 pcs Achsial - Toolholder - Chip Conveyor - Tailstock approx only 300 Work Hours
            turning diameter 220 mm
            turning length 454 mm
            control Fanuc 32i-B
            turning speed range - spindle 3200 U/min
            spindle motor 7.5/5.5 kW
            spindle bore 51 mm
            Spindle speed driven tools 0-6000 min -1
            drive capacity - spindle motor 3.7/2.2 kW
            rapid traverse X-axis 20 m/min
            rapid traverse Z-axis 24 m/min
            travel -y axis +50 / -50 mm
            rapid motion - y-axis 10 m/min
            tool change unit 12-fach (VDI 40)
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 2,9 ×1,8 x 1,7 m
            Description :
            equipped with:
            - CNC control FANUC 32i-B
            - 3-jaw Chuck SMW AutoBlok (210mm)
            - C-Axe / Y-Axe
            - Drive tool Holder: 2 pcs radial, 2 pcs Achsial
            - Toolholder
            - Chip Conveyor
            - Tailstock

            approx only 300 Work Hours
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAS Multicut 500i


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-23 · CNC Turning- and Milling Center

          MAS - Multicut 500i - - 2015 - Siemens 840 D

          Technical details
          turning diameter 1030 mm︱turning length 1600 mm︱control Siemens 840 D ︱spindle bore 106 mm︱b-axis -120° /+105° °︱turning speed range - power take off spindle 3500 U/min︱speeds of universal milling head 12000 U/min︱milling spindle drive 22 kW︱y-travel 370 mm︱b-axis 0,001 °︱c-axis 360´ ︱c-axis 0,001´ ︱total power requirement 59/74 kW︱weight of the machine ca. 23 t︱dimensions of the machine ca. 5,4 x 3,9 x 3,8 m︱
            turning diameter 1030 mm
            turning length 1600 mm
            control Siemens 840 D
            spindle bore 106 mm
            b-axis -120° /+105° °
            turning speed range - power take. 3500 U/min
            speeds of universal milling head 12000 U/min
            milling spindle drive 22 kW
            y-travel 370 mm
            b-axis 0,001 °
            c-axis 360´
            c-axis 0,001´
            total power requirement 59/74 kW
            weight of the machine ca. 23 t
            dimensions of the machine ca. 5,4 x 3,9 x 3,8 m
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN Lynx 220 LMSA (226)


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8762 · CNC Turning- and Milling Center

          DOOSAN - Lynx 220 LMSA (226) - - 2014 - Fanuc i-Series

          Technical details
          turning diameter max. 510 mm︱turning length max. 510 mm︱control Fanuc i-Series ︱swing diameter max. 600 mm︱Swing dia. over traverse guideway 400 mm︱standard turning dia. 170 mm︱Main spindle: ︱Max. rpm 6.000 min/-1︱power capacity - main spindel 11 / 15 kW︱max. Torque 112 Nm︱spindle bore 61 mm︱max. usable bar diameter 51 mm︱chucking diameter - mm︱C-Axis 0,001 °︱spindle nose A2#5 ︱Subspindle: ︱Max. rpm 6.000 min/-1︱power capacity - Sub spindle 5,5 / 3,7 kW︱spindle bore 43 mm︱max. usable bar diameter - mm︱
          CNC-Turning- and Millingcenter DOOSAN - Lynx 220 LMSA - Main- and Subspindle - Tool-Drive - C-Axis - Bar-Feeder
            turning diameter max. 510 mm
            turning length max. 510 mm
            control Fanuc i-Series
            swing diameter max. 600 mm
            Swing dia. over traverse guidewa. 400 mm
            standard turning dia. 170 mm
            Max. rpm 6.000 min/-1
            power capacity - main spindel 11 / 15 kW
            max. Torque 112 Nm
            spindle bore 61 mm
            max. usable bar diameter 51 mm
            chucking diameter - mm
            C-Axis 0,001 °
            spindle nose A2#5
            Max. rpm 6.000 min/-1
            power capacity - Sub spindle 5,5 / 3,7 kW
            spindle bore 43 mm
            max. usable bar diameter - mm
            Description :
            CNC-Turning- and Millingcenter
            DOOSAN - Lynx 220 LMSA

            - Main- and Subspindle
            - Tool-Drive
            - C-Axis
            - Bar-Feeder

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX ABC 65


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40948 · CNC Turning- and Milling Center

          INDEX - ABC 65 - - 2014 - /

          Technical details
          turning diameter 65 mm︱turning length / mm︱control / ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 65 mm︱- bar diameter (max) 65 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6000 /min︱- drive power 4.2 kW︱- spindle torque 10 Nm︱COUNTER SPINDLE ︱- spindle revolutions (max) 6000 /min︱- drive power S6 40% 20 kW︱- drive power S6 40% 27 kW︱- spindle torque S6 40% 105 Nm︱- spindle torque S1 100% 145 Nm︱
            turning diameter 65 mm
            turning length / mm
            control /
            - number of spindles 2
            - number of turrets 2
            - turning diameter (max) 65 mm
            - bar diameter (max) 65 mm
            - spindle revolutions (min) 6000 /min
            - drive power 4.2 kW
            - spindle torque 10 Nm
            - spindle revolutions (max) 6000 /min
            - drive power S6 40% 20 kW
            - drive power S6 40% 27 kW
            - spindle torque S6 40% 105 Nm
            - spindle torque S1 100% 145 Nm
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG-GILDEMEISTER CTX 450 ecoline


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18539 · CNC Turning- and Milling Center

          DMG-GILDEMEISTER - CTX 450 ecoline - - 2014 - Siemens 840D

          Technical details
          turning diameter 400 mm︱turning length 600 mm︱control Siemens 840D ︱standard turning dia. 400 mm︱greates pass round over bed 650 mm︱swing diameter max. over bed cover 465 mm︱Main spindle: ︱turning speed range - main spindle 4000 min/-1︱power capacity - main spindel kW︱max. Torque Nm︱spindle bearing diameter mm︱chuck diameter mm︱max. usable bar diameter mm︱spindle nose 170h5 ︱C-Axis 0,001 °︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 40 ︱Number of driven toolspositions 12 pos.︱Spindle speed - driven tool stations 4000 min -1︱
          - CNC control Siemens Sinumerik 840D sl - C-Axe - 12- fold Revolver, driven Tools (VDI 40) - Chip Conveyor - 3-jaw Chuck 16700h Running- & 2700h Spindle Hours
            turning diameter 400 mm
            turning length 600 mm
            control Siemens 840D
            standard turning dia. 400 mm
            greates pass round over bed 650 mm
            swing diameter max. over bed cov. 465 mm
            turning speed range - main spind. 4000 min/-1
            spindle nose 170h5
            C-Axis 0,001 °
            number of toolpositions 12 pos.
            tool taper VDI 40
            Number of driven toolspositions 12 pos.
            Spindle speed - driven tool stat. 4000 min -1
            Description :
            - CNC control Siemens Sinumerik 840D sl
            - C-Axe
            - 12- fold Revolver, driven Tools (VDI 40)
            - Chip Conveyor
            - 3-jaw Chuck

            16700h Running- & 2700h Spindle Hours
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MTRENT T30MC


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7101 · CNC Turning- and Milling Center

          MTRENT - T30MC - - 2014 - Sinumerik 828 D SIEMENS

          Technical details
          turning diameter 330 mm︱turning length 669 mm︱control Sinumerik 828 D SIEMENS ︱swing diameter 600 mm︱travel -x axis 260 mm︱travel -z axis 762 mm︱spindle speed: 3400 1/min︱taper in tailstock-quill 4 MK︱tailstock travel 627 mm︱diameter of quill 85 mm︱rapid traverse X-axis 20 m/min︱rapid traverse Z-axis 24 m/min︱total power requirement 41 kW︱weight of the machine ca. 5,7 t︱
          - chip conveyor - 3-jaw chuck Ø 250 mm - 12-fold tool changer, driven tools - Hollow clamping cylinder - Tool measuring arm - Workpiece collecting tray - coolant device - machine light
            turning diameter 330 mm
            turning length 669 mm
            control Sinumerik 828 D SIEMENS
            swing diameter 600 mm
            travel -x axis 260 mm
            travel -z axis 762 mm
            spindle speed: 3400 1/min
            taper in tailstock-quill 4 MK
            tailstock travel 627 mm
            diameter of quill 85 mm
            rapid traverse X-axis 20 m/min
            rapid traverse Z-axis 24 m/min
            total power requirement 41 kW
            weight of the machine ca. 5,7 t
            Description :
            - chip conveyor
            - 3-jaw chuck Ø 250 mm
            - 12-fold tool changer, driven tools
            - Hollow clamping cylinder
            - Tool measuring arm
            - Workpiece collecting tray
            - coolant device
            - machine light
          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN Lynx 220 LMSA (224)


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8764 · CNC Turning- and Milling Center

          DOOSAN - Lynx 220 LMSA (224) - - 2014 - Fanuc i-Series

          Technical details
          turning diameter max. 510 mm︱turning length max. 510 mm︱control Fanuc i-Series ︱swing diameter max. 600 mm︱Swing dia. over traverse guideway 400 mm︱standard turning dia. 170 mm︱Main spindle: ︱Max. rpm 6.000 min/-1︱power capacity - main spindel 11 / 15 kW︱max. Torque 112 Nm︱spindle bore 61 mm︱max. usable bar diameter 51 mm︱chucking diameter - mm︱C-Axis 0,001 °︱spindle nose A2#5 ︱Subspindle: ︱Max. rpm 6.000 min/-1︱power capacity - Sub spindle 5,5 / 3,7 kW︱spindle bore 43 mm︱max. usable bar diameter - mm︱
          CNC-Turning- and Millingcenter DOOSAN - Lynx 220 LMSA - Main- and Subspindle - Tool-Drive - C-Axis - Bar-Feeder
            turning diameter max. 510 mm
            turning length max. 510 mm
            control Fanuc i-Series
            swing diameter max. 600 mm
            Swing dia. over traverse guidewa. 400 mm
            standard turning dia. 170 mm
            Max. rpm 6.000 min/-1
            power capacity - main spindel 11 / 15 kW
            max. Torque 112 Nm
            spindle bore 61 mm
            max. usable bar diameter 51 mm
            chucking diameter - mm
            C-Axis 0,001 °
            spindle nose A2#5
            Max. rpm 6.000 min/-1
            power capacity - Sub spindle 5,5 / 3,7 kW
            spindle bore 43 mm
            max. usable bar diameter - mm
            Description :
            CNC-Turning- and Millingcenter
            DOOSAN - Lynx 220 LMSA

            - Main- and Subspindle
            - Tool-Drive
            - C-Axis
            - Bar-Feeder

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN Lynx 220 LMSA (223)


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8763 · CNC Turning- and Milling Center

          DOOSAN - Lynx 220 LMSA (223) - - 2014 - Fanuc i-Series

          Technical details
          turning diameter max. 510 mm︱turning length max. 510 mm︱control Fanuc i-Series ︱swing diameter max. 600 mm︱Swing dia. over traverse guideway 400 mm︱standard turning dia. 170 mm︱Main spindle: ︱Max. rpm 6.000 min/-1︱power capacity - main spindel 11 / 15 kW︱max. Torque 112 Nm︱spindle bore 61 mm︱max. usable bar diameter 51 mm︱chucking diameter - mm︱C-Axis 0,001 °︱spindle nose A2#5 ︱Subspindle: ︱Max. rpm 6.000 min/-1︱power capacity - Sub spindle 5,5 / 3,7 kW︱spindle bore 43 mm︱max. usable bar diameter - mm︱
          CNC-Turning- and Millingcenter DOOSAN - Lynx 220 LMSA - Main- and Subspindle - Tool-Drive - C-Axis - Bar-Feeder
            turning diameter max. 510 mm
            turning length max. 510 mm
            control Fanuc i-Series
            swing diameter max. 600 mm
            Swing dia. over traverse guidewa. 400 mm
            standard turning dia. 170 mm
            Max. rpm 6.000 min/-1
            power capacity - main spindel 11 / 15 kW
            max. Torque 112 Nm
            spindle bore 61 mm
            max. usable bar diameter 51 mm
            chucking diameter - mm
            C-Axis 0,001 °
            spindle nose A2#5
            Max. rpm 6.000 min/-1
            power capacity - Sub spindle 5,5 / 3,7 kW
            spindle bore 43 mm
            max. usable bar diameter - mm
            Description :
            CNC-Turning- and Millingcenter
            DOOSAN - Lynx 220 LMSA

            - Main- and Subspindle
            - Tool-Drive
            - C-Axis
            - Bar-Feeder

          Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG-GILDEMEISTER CTX gamma 3000 TC


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18862 · CNC Turning- and Milling Center

          DMG-GILDEMEISTER - CTX gamma 3000 TC - - 2013 - Sinumerik 840 D Siemens

          Technical details
          turning diameter 700 mm︱turning length 3000 mm︱control Sinumerik 840 D Siemens︱swing diameter 700 mm︱distance between spindles 3260 mm︱Main spindle: ︱turning speed range - main spindle 2000 min/-1︱power capacity - main spindel 59 / 50 kW︱max. Torque 4000 Nm︱spindle head A15 ︱max. usable bar diameter 127 mm︱C-Axis 360 °︱tool magazin: ︱tool taper Capto C8 ︱number of toolpositions 80 pos.︱Milling Spindle: ︱Speed Milling Spindle 12000 min/-1︱power capacity - milling spindle 22 / 13,2 kW︱max. Torque 100 Nm︱tool taper Capto C8
          CNC - Turning- and Millingcenter 5-Axis Simultaneous Machining - Siemens Sinumerik 840D CNC Control w/ DMG Ergoline Control - Main Spindle (ISM 127Plus) - Sub-Spindle (ISM 127) - C-Axis on Both Spindles w/ Brakes - 80-Tool Chain Magazine - Capto C8 Taper - Tailstock Function with Sub-Spindle Interface - Additional Magazine above SubSpindle for 6 boring bar tools - Tool Turret (4000 U/min -10kW - 12x VDI 40) - Chip Blaster Coolant System - Main Spindle SMW BH-D 500/180 Chuck - Sub-Spindle SMW BH-D 500/180 Chuck - Hydraulic Steady Rest SLU 6 - Chip Conveyor - Renishaw Probe - Blum Laser System - ExCentric Turning & Milling Operations - Tooth System Milling Via Gear Hobbing Under 9500 Cutting Hours
            turning diameter 700 mm
            turning length 3000 mm
            control Sinumerik 840 D Siemens
            swing diameter 700 mm
            distance between spindles 3260 mm
            turning speed range - main spind. 2000 min/-1
            power capacity - main spindel 59 / 50 kW
            max. Torque 4000 Nm
            spindle head A15
            max. usable bar diameter 127 mm
            C-Axis 360 °
            tool taper Capto C8
            number of toolpositions 80 pos.
            Speed Milling Spindle 12000 min/-1
            power capacity - milling spindle 22 / 13,2 kW
            max. Torque 100 Nm
            tool taper Capto C8
            Description :
            CNC - Turning- and Millingcenter
            5-Axis Simultaneous Machining
            - Siemens Sinumerik 840D CNC Control w/ DMG Ergoline Control
            - Main Spindle (ISM 127Plus)
            - Sub-Spindle (ISM 127)
            - C-Axis on Both Spindles w/ Brakes
            - 80-Tool Chain Magazine
            - Capto C8 Taper
            - Tailstock Function with Sub-Spindle Interface
            - Additional Magazine above SubSpindle for 6 boring bar tools
            - Tool Turret (4000 U/min -10kW - 12x VDI 40)
            - Chip Blaster Coolant System
            - Main Spindle SMW BH-D 500/180 Chuck
            - Sub-Spindle SMW BH-D 500/180 Chuck
            - Hydraulic Steady Rest SLU 6
            - Chip Conveyor
            - Renishaw Probe
            - Blum Laser System
            - ExCentric Turning & Milling Operations
            - Tooth System Milling Via Gear Hobbing

            Under 9500 Cutting Hours

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.