Travelling column milling machine

x-travel 18000 mm︱y-travel 2500 mm︱z-travel 1250 mm︱Control SIEMENS-SINUMERK 840 D ︱spindle taper HSK-A 80 ︱spindle turning speed range 10 - 10000 U/min︱feeds longditudinal/cross/vertical 1 - 16000 mm/min︱drive milling spindle 31 kW︱total power requirement 65 kW︱weight of the machine ca. 0 t︱dimensions of the machine ca. 25,5 x 10 x 5,2 m︱

---

* spindle on appr. 13,721 h * CNC-control in 5 axis by SIEMENS SINUMERIK 840 D * CNC universal milling head A-axis = +-90° - C-axis = 400° (+200/-200°) * 52-fold tool changer

x-travel mm︱y-travel mm︱z-travel mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

x-travel 3500 mm︱y-travel 1083 mm︱z-travel 1074 mm︱control HEIDENHAIN iTNC 530 HSCI ︱clamping table - ︱surface area 4.000 x 1.000 mm︱Thread bore with fitting - ︱Feeds - ︱X-, Y- and Z-axis, stepless 2 - 30.000 mm/min︱rapid travel x/y/z 30 m/min︱Max. feed force of axis 10.000 N︱2-axis Milling Head - ︱2-axis milling head TUB-E92 with power on - ︱Torque-Motors for 5-axis-simultaneos processing - ︱capacity at 100% load 29 kW︱Speed stepless 2- 30.000 ︱max. torque 92 Nm︱Max. torque 60 min-1︱tool taper HSK 62A-DIN 69893 ︱automatic tool changer ATC - ︱

---

Guides, drive and measuring systems • All axis drives with digital drives manufacturer HEIDENHAIN • Direct measuring systems for X,Y, and Z axis manufacturer HEIDENHAIN • X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics • Precision ball screw with preloaded nuts in X-, Y- and Z-axis Coolant Equipment with Chip conveyor • Coolant outlet, switchable from coolant to air, at the front of the milling head via manually swivelling nozzles • Internal coolant supply, switchable from coolant to air, through the spindle centre. • Tank volume approx. 1.000 l • Normal coolant supply 25l/min 5 bar • High pressure pump for internal cooling 20 l/min 50 bar • Coolant tank incl. Cartridge filter and paper-belt filter system • Hinged belt chip conveyor, discharge height approx. 750 mm Equipment • Machine bed, column and vertical saddle as welded steel construction, annealed with low tension • Milling slider as welded steel construction • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors • Oil cooling unit for cooling the milling head • CNC thermal compensation • Spindle drive 29 kW • Spindle speed max. 18.000 min-1 • Axle drives by means of precision ball screws and digital servo motors • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles • Milling head Measurement “Kinematics Opt” • Laser tool presetter BLUM - NT version mounted on machine table • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable • swivelling control panel for machine operation in front of the machine • Automatic tool changer with 30 magazine places, change position vertical • Coolant system with external shower rim and IKZ through the spindle • 1 chip conveyor in the working area, ejection right • Pretensioned linear guides in all axes • Precision ball screws in all axes • Hydraulic weight compensation in the vertical axis • Bellows cover of the X-axis • Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed • Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table. Safety fencing for the back machine area with two secured access doors.

x-travel 2600 mm︱y-travel 1100 mm︱z-travel 900 mm︱control Siemens 840Dsl ︱turning speed range - milling 18000 U/min︱power capacity - milling spindle 43 kW︱rapid traverse X-axis 40 m/min︱rapid traverse Y-axis 40 m/min︱rapid traverse Z-axis 40 m/min︱b-axis +/- 100 °︱Tool changer 120 pos.︱table surface area 3200 x 1100 mm︱max. table load 4000 kg︱tool taper HSK 100 ︱total power requirement 86 kVA︱

---

equipped with: - CNC control Siemens 840D SL - integrated rotary table dia 1050mm - chip conveyor - swivel head (B-axis) - chain magazine 120-fold (HSK 100) - workpiece measuring mandrel - Blum laser - Oil & emulsion mist separator - Coolant system / IKZ 40bar - Blow air through spindle center - Operating mode 3 - Chip conveyor - 3d QuickSet - vertical rotary table

- - - - - travels - - - - - - - - - - -︱travel -x axis 10.000 mm︱travel -y axis 1.500 mm︱travel -z axis 4.000 mm︱- - - spindle - - - - - - - - -︱output 62.5 kW︱turning speed range 262 - 4.000 U/min︱Torque 2.280 Nm︱- - - table - - - - - - - - -︱Size of table plate 2x (2.500 x 3.000) mm︱longitudinal travel 2.000 mm︱max. load 30.000 kg︱solution 0,0005 °︱solution 1,8 sek.︱table turning speeds 1,5 U/min︱- - - further technical details - - - - - - ︱control Siemens 840 Dsl ︱numbers of positions in the tool changer 80 ︱tool taper ISO 50 ︱max. feed 25.000 mm/min︱

---

Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmission (HBG 800-DP) - ITC (40 bar) - Tool changer (80 pcs. | ISO50) - Magazine for changing the milling heads with 3 places - Infinitely positionable universal head - Horizontal spindle extension (long version) - chip conveyor - Laser probe with software for tool measurement and breakage control - Radio measuring probe (M&H) - Pendulum processing with partition The machine is in very good condition and can be inspected at any time under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SPIRIT-140 | SPIRIT140"

x-travel 8000 mm︱y-travel 1500 mm︱z-travel 2500 mm︱Control Heidenhain Itnc 530 ︱total power requirement 96 kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. m︱

---

Brand: CORREA/ANAYAK Typ: HVM 80 Build in : 2014 travel X/Y/Z 8,000 x 1,500 x 2,500 mm, Spindel : max. 6000 Rpm Spindelpower 28 Kw as extra :high frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11 kW, table dim. (floorplates)8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T- slots 250 mm, table load max. 15,000 kg/m², distance spindle - column max. 1,675 mm, feeds X/Y/Z max. 30,000 mm/min, Total power 96 Kw machine weight 55,000 kg, column 12,000 kg, platen 16,000 kg, 2x CNC screen control, make Heidenhain, type CNC I 530, autom. tool changer, chain type, max. 60 tools, tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm, radio manual control panel, make Heidenhain, type HR-550, telediagnosis system, autom. universal milling head, external cooling, max. 5 bar, self-cleaning filter, tank, volume 600 l, tool outside air cooling, tool inside air cooling, hinged belt chip conveyor, protective housing, tool measuring probe M&H 20.41, control cabinet, ser. No. 218/14,

x-travel 30000 mm︱y-travel 3600 mm︱z-travel 1900 mm︱Control Heidenhain ︱type TNC 530 i ︱milling head -swivable CNC︱turning speeds 4000 U/min︱conus taper DIN 69871+AD mm︱spindle drive 46 kW︱Feed 10000 mm/min︱Rapid movement 25000 mm/min︱chip conveyor 2 St.︱coolant ︱filter unit ︱Plate area 31000x2500 mm︱total power requirement 85 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.

x-travel 30000 mm︱y-travel 3600 mm︱z-travel 1900 mm︱Control Heidenhain TNC 530i ︱turning speed range - milling 4000 U/min︱taper DIN69871+AD ︱spindle drive 46 kW︱feed range - spindle head 10000 mm/min︱rapid traverse 25000 mm/min︱floor plate size: 30000x3000 mm ︱total power requirement 85 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Woeking hours: 9332 Machine number: 5619 Chipconveyor: 2x Angle plates: 4x Box table

x-travel 4000 mm︱y-travel 2100 mm︱z-travel 1500 mm︱Control Heidenhain iTNC530 ︱total power requirement kW︱weight of the machine ca. 43 t︱dimensions of the machine ca. m︱

---

x-travel 14.000 mm︱y-travel 1.500 mm︱z-travel 3.000 mm︱Control Heidenhain Itnc 530 ︱total power requirement 50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour

x-travel 2600 mm︱y-travel 700 mm︱z-travel 700 mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

x-travel 4.500 mm︱y-travel 1.800 mm︱z-travel 1.200 mm︱Control HEIDENHAIN ITNC - 530 ︱handwheel HEIDENHAIN 520 ︱milling head -swivable +/- 2,5 X 2,5 °︱Internal cooling system 20 bar︱coolant 1.000 L︱tool change unit 40 pos.︱Chip coveyor 2 St. ︱Tool adapter ISO 50 ︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 2500 mm︱y-travel 920 mm︱z-travel 820 mm︱Control Heidenhain iTNC 530 ︱weight of the machine ca. 24.500 kg︱dimensions of the machine ca. 6500 x 9300 x 3267 mm︱

---

- Table size: 3100 x 900 mm - 30-fold tool changer - Tool holder: SK50 - spindle speed: max. 10.000 rpm - Chip conveyor make DMG - Collision monitoring system make Brankamp - Measuring probe M+H - Partition wall for pendulum machining - incl. 50 tool holders SK50

x-travel 6000 mm︱y-travel 2100 mm︱z-travel 1500 mm︱control HEIDENHAIN iTNC 530 ︱feed 2- 20 m/min︱spindle turning speed range 20 -4000 U/min︱table dimension - longitudinal 7000 mm︱table dimension - cross 2000 mm︱total power requirement 79 kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. 15 x 7 x 4,6 m︱

---

The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min

x-travel 6000 mm︱y-travel 2100 mm︱z-travel 1500 mm︱Controls HEIDENHAIN iTNC 530 ︱----------------------------------- ︱BASIC DESIGN . ︱ - basic design : travelling column . ︱WORKING RANGE -MILLING- . ︱ - x-axis traverse 6000 mm︱ - y-axis traverse 2100 mm︱ - z-axis traverse 1500 mm︱FLOOR PLATE . ︱ - clamping surface (left-right) 7000 mm︱ - clamping surface (front-back) 2000 mm︱WORKING SPINDLE / HEAD . ︱ - spindle type : orthogonal head . ︱ - tilting range 360 °︱ - - mode of operation : automatic . ︱ - - positioning/indexing 1 °︱ - tilting range (2nd axis) 270 °︱

---

Technical description : Traveling column milling machine with Heidenhain TNC530 control, coolant system, chip conveyor and STOLLE floor plate area 7000 mm length and by 2000 mm width (valued at Euro 20.000 is included). - NOTE: The clamping table, the clamping angle, are NOT included in the scope of delivery. Those optionals can be purchased separately at following EXW ex works prices ANGLE PLATE Euro 5.000,-- PER UNIT CUBE FOR CLAMPING EURO 2.000,--

x-travel 4000 mm︱y-travel 1500 mm︱z-travel 3500 mm︱Control Siemens 840D ︱tool taper ISO 50 ︱spindle turning speed range 5000 U/min︱power capacity at 100 % load 37 kW︱max. torque on the spindle 1296 Nm︱rapid traverse X/Y/Z m/min︱milling head -swivable Grad︱toolpiece magazine: chain magazine 40 Stück︱table surface area dia 1500 mm︱table load ja 12 t︱total power requirement kW︱weight of the machine ca. t︱

---

Travelling column milling machine with - control Siemens 840D - autom. Bi-rotativ milling head, 1x1°, 5000 U/min - tool changer 2x 40-fold (ISO 50) - chip conveyor - 2 Rotary Tables (dia 1500mm) - Renishaw RMP 60 - Laser Sensopart - Coolant (Through Spindle and External)

x-travel 3700 mm︱y-travel 840 mm︱z-travel 850 mm︱Tool bore SK 40 ︱tool magazin: 50 fach︱Control Siemens Sinumerik 840D ︱coolant 1 ︱total power requirement kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 8 x 3,5 x 3,5 m︱

---

CNC Machining Center - Vertical Manufacturer: CINCINNATI Type: FTV 840/3700 Year of construction: 2006 Serial No.: 7080-S00-KD0211 CNC control SIEMENS Sinumerik 840D SK40 tool holder tool changer T-slot clamping table approx. 3700x840 mm chip conveyor coolant treatment Accesories: approx. 180 tool holders SK40 (some with tools)

x travel 12000 mm︱y travel 1000 mm︱z travel 1800 mm︱- table surface (left-right) 13313 mm︱- table surface (front-back) 1090 mm︱workpiece weight 8000 kg/m²︱- spindle revolutions (max) 10 - 4500 U/min︱- tool fixture: ISO SK 50 ︱- drive power 20 kW︱ram head dimension 390 x 390 mm︱A-Axis je 1 °︱c-axis je 3 °︱- rapid traverse 15000 mm/min︱control Selca S 3045L ︱total power requirement kW︱Total weight, approx. kg︱dimensions of the machine ca. m︱

---

- CNC control Selca S 3045L - Tool changer 41-fold (ISO 50) - autom. BiRotativ milling head - Coolant & filter system - chip conveyor

CNC brand Heidenhain ︱Table length 5000 mm︱Table width 2000 mm︱X 5000 mm︱Y 3100 mm︱Z 1200 mm︱Spindle taper HSK 63 ︱Speed 18000 RPM︱Tool changer 24 ︱Distance between columns 2800 mm︱Machine dimensions (lxwxh) 15000 x 6200 x 6000 mm︱Machine weight 65000 kg︱

---

5-axis machine

x-travel 10500 mm︱y-travel 2750 mm︱y-travel (3350) mm︱z-travel 1500 mm︱turning speeds 3500 U/min︱Tool changer 80 ︱Control Heidenhain TNC 430 M︱positioning accuracy 1 °︱milling-head swivable +/- CNC ︱Plate area 12000x2500 mm︱chip conveyor ︱spindle taper ISO 50 ︱Spindle capacity 37 KW︱Feed 6000 mm/min︱Rapid movement 15000 mm/min︱total power requirement kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 18,1x6,7 m︱

---

CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500

x-travel 10500 mm︱y-travel 2750 mm︱y-travel (3350) mm︱z-travel 1500 mm︱turning speeds 3500 U/min︱Tool changer 80 ︱Control Heidenhain TNC 430 M︱positioning accuracy 1 °︱milling-head swivable +/- CNC ︱Plate area 12000x2500 mm︱chip conveyor ︱spindle taper ISO 50 ︱Spindle capacity 37 KW︱Feed 6000 mm/min︱Rapid movement 15000 mm/min︱total power requirement kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 18,1x6,7 m︱

---

CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500

x-travel 16300 mm︱y-travel 2600 mm︱z-travel 1600 mm︱Control Heidenhain ︱type TNC 430 ︱tool taper ISO 50 ︱spindle turning speed range 22-4000 U/min︱feed in x - axis 36000 mm/min︱feed in y - axis 24000 mm/min︱feed range Z-direction 24000 mm/min︱main drive motor 37 kW︱Tool changer 90 ︱coolant ︱ ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

travel -x axis 2.300 mm︱travel -y axis 800 mm︱travel -z axis 600 mm︱control Heidenhain - iTNC426 ︱number of spindle speeds 8.000 U/min︱weight of the machine 14.000 kg︱

---

Travelling column milling machine | HEDELIUS - CB 80 – 2300 Magnum with chip conveyor The machine is in a well-maintained condition. Further technical data of the machine will follow soon. Machine video available on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CB80 | CB-80 | CB80–2300Magnum | CB80 – 2300Magnum

x-travel 8000 mm︱y-travel 1000 mm︱z-travel 1250 mm︱dividing head CNC ︱chip conveyor ︱Universal angular milling head 2-axis adjustable ︱control Fagor ︱type 8025 ︱ CNC ︱clamping plate 1500x3000 mm︱clamping plate 1500x4000 mm︱clamping plate 1500x4000 mm︱taper ISO 50 P.D.B. ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---