Европейская сеть дилеров складской техники

категория:
    Производитель:
      Машины:
        Трейдер:

          Metal Processing - Band Saw

          Machinelist: ленточная пила


          Band Saw

          б / у Ленточные пилы MEP Shark 282 SXI EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010260 · Band Saw

          MEP - Shark 282 SXI EVO - - Neu -

          Technical details
          36/72 m/min︱ 285 mm︱dimensions of saw-band 2950 x 27 x 0,9 mm︱capacity 90 degrees: square 220 mm︱capacity 90 degrees: round 250 mm︱capacity 90 degrees: flat 280x220 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 80 mm︱capacity 60 degrees: flat 140x100 mm︱capacity 45 degrees: round 230/200 mm︱capacity 45 degrees: square 200/170 mm︱capacity 45 degrees: flat 220x200/200x140 mm︱total power requirement 1,5/1,8 kW︱Weight 485 kg︱Overall size 1970x1150x1840 mm︱
          Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically.
            36/72 m/min
            285 mm
            dimensions of saw-band 2950 x 27 x 0,9 mm
            capacity 90 degrees: square 220 mm
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: flat 280x220 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 80 mm
            capacity 60 degrees: flat 140x100 mm
            capacity 45 degrees: round 230/200 mm
            capacity 45 degrees: square 200/170 mm
            capacity 45 degrees: flat 220x200/200x140 mm
            total power requirement 1,5/1,8 kW
            Weight 485 kg
            Overall size 1970x1150x1840 mm
            Description :
            Semi-automatic function:
            - Vice closes and engine starts
            - Saw head lowers for the cut
            - Engine shuts off
            - Saw head lifts, vice opens

            Semiautomatic dynamic system:
            Manual lowering of the saw blade to the desired
            Position and cycle start via the manual button.
            Upper position is saved automatically.
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEP Shark 332 SXI EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010311 · Band Saw

          MEP - Shark 332 SXI EVO - - Neu -

          Technical details
          40/80 m/min︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330x260 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170x170 mm︱capacity 45 degrees: round 260/200 mm︱capacity 45 degrees: square 250/180 mm︱capacity 45 degrees: flat 270x200/200x160 mm︱total power requirement 1,5/1,8 kW︱Weight 670 kg︱Overall size 2130x1400x1950 mm︱dimensions of saw-band 3320 x 27 x 0,9 mm︱
          Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position and cycle start over the hand switch. Upper position is saved automatically.
            40/80 m/min
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330x260 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            capacity 60 degrees: flat 170x170 mm
            capacity 45 degrees: round 260/200 mm
            capacity 45 degrees: square 250/180 mm
            capacity 45 degrees: flat 270x200/200x160 mm
            total power requirement 1,5/1,8 kW
            Weight 670 kg
            Overall size 2130x1400x1950 mm
            dimensions of saw-band 3320 x 27 x 0,9 mm
            Description :
            Semi-automatic function:
            - Vice closes and engine starts
            - Saw head lowers for the cut
            - Engine shuts off
            - Saw head lifts, vice opens

            Semiautomatic dynamic system:
            Manual lowering of the saw blade to the desired position and cycle start
            over the hand switch. Upper position is saved automatically.
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEP Shark 282 CCS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10049 · Band Saw

          MEP - Shark 282 CCS - - Neu -

          Technical details
          dimensions of saw-band 2950x27x0,9 mm︱ 36/72 m/min︱ 285 mm︱capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 220 mm︱capacity 90 degrees: flat 280x220 mm︱capacity 45 degrees: round 230/200 mm︱capacity 45 degrees: square 200/170 mm︱capacity 45 degrees: flat 220x200/200x140 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 80 mm︱capacity 60 degrees: flat 140x100 mm︱output 1,5 / 1,8 kW︱Weight 440 kg︱dimensions 1700x1000x1650 mm︱
          - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove
            dimensions of saw-band 2950x27x0,9 mm
            36/72 m/min
            285 mm
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 220 mm
            capacity 90 degrees: flat 280x220 mm
            capacity 45 degrees: round 230/200 mm
            capacity 45 degrees: square 200/170 mm
            capacity 45 degrees: flat 220x200/200x140 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 80 mm
            capacity 60 degrees: flat 140x100 mm
            output 1,5 / 1,8 kW
            Weight 440 kg
            dimensions 1700x1000x1650 mm
            Description :
            - with semi-automatic lowering
            - The CUT CONTROL SYSTEM allows semi-automatic lowering of the
            Saw bow by the weight of the saw head
            - The lowering speed is infinitely regulated. Single cuts can do so
            be carried out with uniform feed
            - The SHARK 282 CCS has a turntable for double-sided miter. The cut
            always takes place in the same groove
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEBA MEBAswing 320 G-HSS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010804 · Band Saw

          MEBA - MEBAswing 320 G-HSS - - Neu -

          Technical details
          15-150 m/min︱capacity 90 degrees: round 325 mm︱capacity 90 degrees: flat 500 x 300 mm︱capacity 45 degrees: round 300 mm︱capacity 45 degrees: flat 300 x 300 mm︱ 200 mm︱ 200 x 200 mm︱ 60 mm︱dimensions of saw-band 4200 x 34 x 1,1 mm︱ 165 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 3 kW︱dimensions 1300 x 2050 x 1400 mm︱weight 910 kg︱
          Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high performance package version "HSS": Hydraulic lifting and lowering of the Sawing frame and hydraulic clamping of the sawing material. stepless hydraulic cutting and feed regulation. Display lowering speed about scale. Display of cutting pressure via pressure gauge. Rapid traverse reduction of the Sawing frame via pushbutton to material edge - Frequency-controlled AC drive 15-150 m / min, 3 kW - Hydraulic material full lift voltage - Hydraulic lifting and lowering of the saw frame - Hydraulic clamping of the material
            15-150 m/min
            capacity 90 degrees: round 325 mm
            capacity 90 degrees: flat 500 x 300 mm
            capacity 45 degrees: round 300 mm
            capacity 45 degrees: flat 300 x 300 mm
            200 mm
            200 x 200 mm
            60 mm
            dimensions of saw-band 4200 x 34 x 1,1 mm
            165 mm
            min. dia. 5 mm
            work height max. 750 mm
            total power requirement 3 kW
            dimensions 1300 x 2050 x 1400 mm
            weight 910 kg
            Description :
            Standard equipment:
            - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy
            according to scale. The miter turning point is the point of intersection between saw band and
            Material system, thereby no change in the length dimension
            - At each angular position of the saw frame, the material is parallel in 90°
            tightened
            - Complete coolant device with electric submersible pump
            - Machine stand with chip collecting tray
            - Precise saw band carbide roller guide, saw blade brush
            - 1 saw blade on machine 4-6 ZpZ
            - MEBA high performance package version "HSS": Hydraulic lifting and lowering of the
            Sawing frame and hydraulic clamping of the sawing material. stepless
            hydraulic cutting and feed regulation. Display lowering speed
            about scale. Display of cutting pressure via pressure gauge. Rapid traverse reduction of the
            Sawing frame via pushbutton to material edge
            - Frequency-controlled AC drive 15-150 m / min, 3 kW
            - Hydraulic material full lift voltage
            - Hydraulic lifting and lowering of the saw frame
            - Hydraulic clamping of the material
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEP SHARK 332 CCS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010628 · Band Saw

          MEP - SHARK 332 CCS - - NEU -

          Technical details
          dimensions of saw-band 3320x27x0,9 mm︱ 40/80 m/min︱ 335 mm︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330x260 mm︱ 260 mm︱ 250270x200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170x170 mm︱ 200 mm︱ 180 mm︱ 200x160 mm︱weight of the machine ca. 640 kg︱dimensions of the machine ca. 2140x1300x1950 mm︱
            dimensions of saw-band 3320x27x0,9 mm
            40/80 m/min
            335 mm
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330x260 mm
            260 mm
            250
            270x200 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            capacity 60 degrees: flat 170x170 mm
            200 mm
            180 mm
            200x160 mm
            weight of the machine ca. 640 kg
            dimensions of the machine ca. 2140x1300x1950 mm
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEP Shark 382 SXI EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010715 · Band Saw

          MEP - Shark 382 SXI EVO - - Neu -

          Technical details
          dimensions of saw-band 3440x27x0,9 mm︱ 40/80 m/min︱ 385 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: round 280 mm︱capacity 90 degrees: flat 380x260 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 200x170 mm︱capacity 45 degrees: round 260/200 mm︱capacity 45 degrees: square 250/180 mm︱capacity 45 degrees: flat 300x200/230x160 mm︱total power requirement 1,5/1,8 kW︱Weight 695 kg︱Overall size 2000x1200x1800 mm︱
            dimensions of saw-band 3440x27x0,9 mm
            40/80 m/min
            385 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: round 280 mm
            capacity 90 degrees: flat 380x260 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            capacity 60 degrees: flat 200x170 mm
            capacity 45 degrees: round 260/200 mm
            capacity 45 degrees: square 250/180 mm
            capacity 45 degrees: flat 300x200/230x160 mm
            total power requirement 1,5/1,8 kW
            Weight 695 kg
            Overall size 2000x1200x1800 mm
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEBA MEBApro 260 GP


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010551 · Band Saw

          MEBA - MEBApro 260 GP - - Neu -

          Technical details
          15 - 150 m/min︱dimensions of saw-band 3350 x 27 x 0,9 mm︱capacity 90 degrees: round 260 mm︱capacity 90 degrees: flat 300 x 260 mm︱capacity 45 degrees: round 240 mm︱capacity 45 degrees: flat 220 x 260 mm︱ 140 mm︱ 140 x 200 mm︱ 20 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 1,5 kW︱Weight 625 kg︱dimensions 2000 x 1650 x 1850 mm︱
          Standard equipment: - Sturdy portal frame construction 2-column linearly guided - Saw feed via frequency-controlled spindle drive with automatic Cutting pressure regulation - Stepless cutting speed via AC drive - Central, clear control panel - Height switch bar - Precise saw band carbide roller guide - saw blade brush - Saw band tilted 2 ° - lacquer silver gray / blue gray (RAL 7001 / RAL 7031) - 1 saw blade on the machine 4/6 ZpZ - Operating instructions and spare parts list - Digital miter gauge 90 ° -30 ° - Miter storage over working surface, thus free of all components pollution - Integrated closed roller conveyor 2000 mm - Material quick tension. At each angular position of the saw frame is the Material stretched parallel in 90 ° - Integrated chip drawer - Minimal quantity lubrication, environmentally friendly and clean
            15 - 150 m/min
            dimensions of saw-band 3350 x 27 x 0,9 mm
            capacity 90 degrees: round 260 mm
            capacity 90 degrees: flat 300 x 260 mm
            capacity 45 degrees: round 240 mm
            capacity 45 degrees: flat 220 x 260 mm
            140 mm
            140 x 200 mm
            20 mm
            min. dia. 5 mm
            work height max. 750 mm
            total power requirement 1,5 kW
            Weight 625 kg
            dimensions 2000 x 1650 x 1850 mm
            Description :
            Standard equipment:
            - Sturdy portal frame construction 2-column linearly guided
            - Saw feed via frequency-controlled spindle drive with automatic
            Cutting pressure regulation
            - Stepless cutting speed via AC drive
            - Central, clear control panel
            - Height switch bar
            - Precise saw band carbide roller guide
            - saw blade brush
            - Saw band tilted 2 °
            - lacquer silver gray / blue gray (RAL 7001 / RAL 7031)
            - 1 saw blade on the machine 4/6 ZpZ
            - Operating instructions and spare parts list
            - Digital miter gauge 90 ° -30 °
            - Miter storage over working surface, thus free of all components
            pollution
            - Integrated closed roller conveyor 2000 mm
            - Material quick tension. At each angular position of the saw frame is the
            Material stretched parallel in 90 °
            - Integrated chip drawer
            - Minimal quantity lubrication, environmentally friendly and clean
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEBA MEBAswing 260 DG-HS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010656 · Band Saw

          MEBA - MEBAswing 260 DG-HS - - NEU -

          Technical details
          35/75 m/min︱dimensions of saw-band 3350x27x0,9 mm︱capacity 90 degrees: round 260 mm︱capacity 90 degrees: flat 300x260 mm︱capacity 45 degrees: round 200 mm︱capacity 45 degrees: flat 180x180 mm︱ 130 mm︱ 120x120 mm︱ 25 mm︱min. dia. 5 mm︱work height max. 900 mm︱total power requirement 1,1/1,8 kW︱dimensions 1720x800x1450 mm︱
          Standard equipment: - Fast miter adjustment by scale - miter turning point is the point of intersection between saw blade and material system, no changes in the length measure - Manual material tension - at each angular position of the saw frame is the Material stretched parallel in 90 ° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - Machine stand with chip collecting tray - saw blade drive with limit stop - Precise saw band carbide roller guide Additional standard equipment 260 DG-HS: - Hydraulic lifting of the saw frame - Hydraulic clamping of the saw frame - rapid traverse lowering to upper edge of material
            35/75 m/min
            dimensions of saw-band 3350x27x0,9 mm
            capacity 90 degrees: round 260 mm
            capacity 90 degrees: flat 300x260 mm
            capacity 45 degrees: round 200 mm
            capacity 45 degrees: flat 180x180 mm
            130 mm
            120x120 mm
            25 mm
            min. dia. 5 mm
            work height max. 900 mm
            total power requirement 1,1/1,8 kW
            dimensions 1720x800x1450 mm
            Description :
            Standard equipment:
            - Fast miter adjustment by scale
            - miter turning point is the point of intersection between saw blade and material system,
            no changes in the length measure
            - Manual material tension - at each angular position of the saw frame is the
            Material stretched parallel in 90 °
            - Cutting pressure reduction by weight of the heavy, torsionally stiff
            Sawing frame and fine adjustment depending on the material cross section via hydraulic
            damping cylinder
            - Machine stand with chip collecting tray
            - saw blade drive with limit stop
            - Precise saw band carbide roller guide

            Additional standard equipment 260 DG-HS:
            - Hydraulic lifting of the saw frame
            - Hydraulic clamping of the saw frame
            - rapid traverse lowering to upper edge of material
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEBA MEBAswing 260 DG


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010561 · Band Saw

          MEBA - MEBAswing 260 DG - - Neu -

          Technical details
          35/75 m/min︱dimensions of saw-band 3350 x 27 x 0,9 mm︱capacity 90 degrees: round 260 mm︱capacity 90 degrees: flat 300 x 260 mm︱capacity 45 degrees: round 200 mm︱capacity 45 degrees: flat 180 x 180 mm︱ 130 mm︱ 120 x 120 mm︱ 25 mm︱min. dia. 5 mm︱work height max. 900 mm︱total power requirement 1,1/1,8 kW︱dimensions 1720 x 800 x 1450 mm︱weight 710 kg︱
          Equipment / Accessories: - Fast miter adjustment from 30° - 150° stepless to 0,5 ° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension. - End stops at 30° + 45° left and 30°+45° right - Manual material tension. At each angular position of the saw frame is the Material stretched parallel in 90° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - MEBA micro dosing system complete with spray head - Machine stand with chip collecting tray - saw blade drive with limit stop - Precise saw band carbide roller guide Additional equipment: - Hydraulic lifting of the saw frame
            35/75 m/min
            dimensions of saw-band 3350 x 27 x 0,9 mm
            capacity 90 degrees: round 260 mm
            capacity 90 degrees: flat 300 x 260 mm
            capacity 45 degrees: round 200 mm
            capacity 45 degrees: flat 180 x 180 mm
            130 mm
            120 x 120 mm
            25 mm
            min. dia. 5 mm
            work height max. 900 mm
            total power requirement 1,1/1,8 kW
            dimensions 1720 x 800 x 1450 mm
            weight 710 kg
            Description :
            Equipment / Accessories:
            - Fast miter adjustment from 30° - 150° stepless to 0,5 ° accuracy
            according to scale. The miter turning point is the point of intersection between saw band and
            Material system, thereby no change in the length dimension.
            - End stops at 30° + 45° left and 30°+45° right
            - Manual material tension. At each angular position of the saw frame is the
            Material stretched parallel in 90°
            - Cutting pressure reduction by weight of the heavy, torsionally stiff
            Sawing frame and fine adjustment depending on the material cross section via hydraulic
            damping cylinder
            - MEBA micro dosing system complete with spray head
            - Machine stand with chip collecting tray
            - saw blade drive with limit stop
            - Precise saw band carbide roller guide

            Additional equipment:
            - Hydraulic lifting of the saw frame
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEP Shark 281 SXI EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010270 · Band Saw

          MEP - Shark 281 SXI EVO - - Neu -

          Technical details
          36/72 m/min︱ 285 mm︱capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 230 mm︱capacity 90 degrees: flat 280x200 mm︱capacity 45 degrees: round 190 mm︱capacity 45 degrees: square 180 mm︱capacity 45 degrees: flat 180x180 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 110 mm︱capacity 60 degrees: flat 110x110 mm︱output 1,5 / 1,8 kW︱Weight 435 kg︱dimensions 1700x1000x1840 mm︱dimensions of saw-band 2950 x 27 x 0,9 mm︱
          Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens
            36/72 m/min
            285 mm
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 230 mm
            capacity 90 degrees: flat 280x200 mm
            capacity 45 degrees: round 190 mm
            capacity 45 degrees: square 180 mm
            capacity 45 degrees: flat 180x180 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 110 mm
            capacity 60 degrees: flat 110x110 mm
            output 1,5 / 1,8 kW
            Weight 435 kg
            dimensions 1700x1000x1840 mm
            dimensions of saw-band 2950 x 27 x 0,9 mm
            Description :
            Semi-automatic function:
            - Vice closes and engine starts
            - Saw head lowers for the cut
            - Engine shuts off
            - Saw head lifts - vise opens
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEBA MEBAswing 320 DG


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010690 · Band Saw

          MEBA - MEBAswing 320 DG - - Neu -

          Technical details
          35/75 m/min︱sawband speed 15-150 m/min︱dimensions of saw-band 4200x34x1,1 mm︱capacity 90 degrees: round 325 mm︱capacity 90 degrees: flat 500x300 mm︱ 300 mm︱ 300x300 mm︱ 200 mm︱ 200x200 mm︱ 300 mm︱ 300x300 mm︱ 85 mm︱ 260 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 3,0 kW︱dimensions 1450x2200x1400 mm︱
          Equipment / Accessories: - Fast miter adjustment from 30° - 150° stepless, digital Miter indication to 0.1°. - Manual material tension. At each angular position of the saw frame is the Material tightened parallel in 90°. - MEBA - High performance package "HSS" version - Hydraulic lifting and lowering the saw frame and hydraulic clamping of the sawing material Stepless hydraulic cutting pressure and feed regulation Display lowering speed over scale. Display section via pressure gauge. Rapid traverse reduction of the saw frame via pushbutton to material edge - Frequency controlled AC drive 15-150 m / min - 3 kW - Hydraulic material full lift voltage - Machine stand with chip collecting tray - Sägebandantieb with limit switch - Precise saw band carbide roller guide, saw blade brush - Complete coolant device with electric submersible pump
            35/75 m/min
            sawband speed 15-150 m/min
            dimensions of saw-band 4200x34x1,1 mm
            capacity 90 degrees: round 325 mm
            capacity 90 degrees: flat 500x300 mm
            300 mm
            300x300 mm
            200 mm
            200x200 mm
            300 mm
            300x300 mm
            85 mm
            260 mm
            min. dia. 5 mm
            work height max. 750 mm
            total power requirement 3,0 kW
            dimensions 1450x2200x1400 mm
            Description :
            Equipment / Accessories:
            - Fast miter adjustment from 30° - 150° stepless, digital Miter indication to 0.1°.
            - Manual material tension. At each angular position of the saw frame is the
            Material tightened parallel in 90°.
            - MEBA - High performance package "HSS" version - Hydraulic lifting and lowering
            the saw frame and hydraulic clamping of the sawing material
            Stepless hydraulic cutting pressure and feed regulation
            Display lowering speed over scale. Display section via pressure gauge.
            Rapid traverse reduction of the saw frame via pushbutton to material edge
            - Frequency controlled AC drive 15-150 m / min - 3 kW
            - Hydraulic material full lift voltage
            - Machine stand with chip collecting tray
            - Sägebandantieb with limit switch
            - Precise saw band carbide roller guide, saw blade brush
            - Complete coolant device with electric submersible pump
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEP PH 262 CCS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010664 · Band Saw

          MEP - PH 262 CCS - - Neu -

          Technical details
          dimensions of saw-band 2450x27x0,9 mm︱ 46/92 m/min︱ 245 mm︱capacity 90 degrees: round 225 mm︱capacity 90 degrees: square 200 mm︱capacity 90 degrees: flat 240x160 mm︱capacity 45 degrees: round 160/145 mm︱capacity 45 degrees: square 140/125 mm︱capacity 45 degrees: flat 155x115/150x100 mm︱capacity 60 degrees: round 90 mm︱capacity 60 degrees: square 90 mm︱capacity 60 degrees: flat 90x90 mm︱output 0,7 / 0,81 kW︱Weight 265 kg︱dimensions 1600x750 mm︱
          Domestic equipments: Band saw for double miter cuts from 45 ° right to 60 ° left. At the System CCS, the individual cuts are carried out independently. - Electrical panel - Control handle IP 55 protected - Adjustable stops at 0 °, 60 ° left and 45 ° right with clamping lever. - Saw head joint with preloaded tapered roller bearing - quick release vice - Electric coolant pump - Adjustable length stop The PH 262 CCS has a turntable for double-sided mitring. The cut always takes place in the same groove.
            dimensions of saw-band 2450x27x0,9 mm
            46/92 m/min
            245 mm
            capacity 90 degrees: round 225 mm
            capacity 90 degrees: square 200 mm
            capacity 90 degrees: flat 240x160 mm
            capacity 45 degrees: round 160/145 mm
            capacity 45 degrees: square 140/125 mm
            capacity 45 degrees: flat 155x115/150x100 mm
            capacity 60 degrees: round 90 mm
            capacity 60 degrees: square 90 mm
            capacity 60 degrees: flat 90x90 mm
            output 0,7 / 0,81 kW
            Weight 265 kg
            dimensions 1600x750 mm
            Description :
            Domestic equipments:
            Band saw for double miter cuts from 45 ° right to 60 ° left. At the
            System CCS, the individual cuts are carried out independently.

            - Electrical panel
            - Control handle IP 55 protected
            - Adjustable stops at 0 °, 60 ° left and 45 ° right with clamping lever.
            - Saw head joint with preloaded tapered roller bearing
            - quick release vice
            - Electric coolant pump
            - Adjustable length stop

            The PH 262 CCS has a turntable for double-sided mitring. The cut
            always takes place in the same groove.
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEP PH 211-1 CCS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10046 · Band Saw

          MEP - PH 211-1 CCS - - Neu -

          Technical details
          dimensions of saw-band 2135x20x0,9 mm︱ 40/80 m/min︱ 200 mm︱capacity 90 degrees: round 180 mm︱capacity 90 degrees: square 180 mm︱capacity 90 degrees: flat 200x150 mm︱capacity 45 degrees: round 115 mm︱capacity 45 degrees: square 110 mm︱capacity 45 degrees: flat 125x110 mm︱capacity 60 degrees: round 70 mm︱capacity 60 degrees: square 70 mm︱capacity 60 degrees: flat 70x70 mm︱total power requirement 0,70/0,81 kW︱Weight 190 kg︱dimensions 1510x800x1650 mm︱
          Domestic equipments: - with semi-automatic lowering - In the CCS system, the individual cuts become independent, instead of manual cuts. - Electric control panel with fully identifiable cabling, Stand By, lockable main switch, speed switch, thermomagnetic protection, Undervoltage release, phase failure protection, low voltage 24 V and Emergency stop switch) - The new drive wheel is attached to the shaft with a clamping set and ensures a frictional connection of shaft and hub, as well as a possible axial adjustment. - New saw band guide heads with 6 precision carbide guides (WIDIA). - Control handle IP 55 protected - Adjustable stops at 0 ° and 60 ° left with clamping lever around the saw head in to lock each angular position. - Saw head joint with preloaded tapered roller bearing - quick release vice - Underframe with tub for the coolant - Electric coolant pump for cooling and lubrication of the saw blade - Späneräumb brush - Double return spring - Adjustable length stop for cuts of the same length - Bimetallic saw band for solid and profile material
            dimensions of saw-band 2135x20x0,9 mm
            40/80 m/min
            200 mm
            capacity 90 degrees: round 180 mm
            capacity 90 degrees: square 180 mm
            capacity 90 degrees: flat 200x150 mm
            capacity 45 degrees: round 115 mm
            capacity 45 degrees: square 110 mm
            capacity 45 degrees: flat 125x110 mm
            capacity 60 degrees: round 70 mm
            capacity 60 degrees: square 70 mm
            capacity 60 degrees: flat 70x70 mm
            total power requirement 0,70/0,81 kW
            Weight 190 kg
            dimensions 1510x800x1650 mm
            Description :
            Domestic equipments:
            - with semi-automatic lowering
            - In the CCS system, the individual cuts become independent, instead of
            manual cuts.
            - Electric control panel with fully identifiable cabling, Stand By,
            lockable main switch, speed switch, thermomagnetic protection,
            Undervoltage release, phase failure protection, low voltage 24 V and
            Emergency stop switch)
            - The new drive wheel is attached to the shaft with a clamping set and
            ensures a frictional connection of shaft and hub, as well as a
            possible axial adjustment.
            - New saw band guide heads with 6 precision carbide guides (WIDIA).
            - Control handle IP 55 protected
            - Adjustable stops at 0 ° and 60 ° left with clamping lever around the saw head in
            to lock each angular position.
            - Saw head joint with preloaded tapered roller bearing
            - quick release vice
            - Underframe with tub for the coolant
            - Electric coolant pump for cooling and lubrication of the saw blade
            - Späneräumb brush
            - Double return spring
            - Adjustable length stop for cuts of the same length
            - Bimetallic saw band for solid and profile material
          Datasheet
          Request / Contact
          б / у Ленточные пилы ZIMMER Z 150 / R


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010710 · Band Saw

          ZIMMER - Z 150/R - - Neu -

          Technical details
          25-138 m/min︱dimensions of saw-band 1440x13x0,65 mm︱capacity 90 degrees: round 150 mm︱capacity 90 degrees: square 125 mm︱capacity 90 degrees: flat 150x125 mm︱capacity 45 degrees: round 75 mm︱capacity 45 degrees: square 50 mm︱capacity 45 degrees: flat 70x50 mm︱weight of the machine ca. 35 kg︱
          Standard features: - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control
            25-138 m/min
            dimensions of saw-band 1440x13x0,65 mm
            capacity 90 degrees: round 150 mm
            capacity 90 degrees: square 125 mm
            capacity 90 degrees: flat 150x125 mm
            capacity 45 degrees: round 75 mm
            capacity 45 degrees: square 50 mm
            capacity 45 degrees: flat 70x50 mm
            weight of the machine ca. 35 kg
            Description :
            Standard features:
            - Single-phase 1800 watt motor
            - Safety switch
            - Electronic rotary speed controller 25-138 m / min. with torque control
          Datasheet
          Request / Contact
          б / у Ленточные пилы ZIMMER Z 150 / R + L


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010711 · Band Saw

          ZIMMER - Z 150/R+L - - Neu -

          Technical details
          25-138 m/min︱dimensions of saw-band 1440x13x0,65 mm︱capacity 90 degrees: round 150 mm︱capacity 90 degrees: square 125 mm︱capacity 90 degrees: flat 150x125 mm︱capacity 45 degrees: round 75 mm︱capacity 45 degrees: square 50 mm︱capacity 45 degrees: flat 70x50 mm︱weight of the machine ca. 35 kg︱
          Standard features: - right and left miter - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control
            25-138 m/min
            dimensions of saw-band 1440x13x0,65 mm
            capacity 90 degrees: round 150 mm
            capacity 90 degrees: square 125 mm
            capacity 90 degrees: flat 150x125 mm
            capacity 45 degrees: round 75 mm
            capacity 45 degrees: square 50 mm
            capacity 45 degrees: flat 70x50 mm
            weight of the machine ca. 35 kg
            Description :
            Standard features:
            - right and left miter
            - Single-phase 1800 watt motor
            - Safety switch
            - Electronic rotary speed controller 25-138 m / min. with torque control
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEP Shark 512 SXI EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010773 · Band Saw

          MEP - Shark 512 SXI EVO - - Neu -

          Technical details
          dimensions of saw-band 4640x34x1,1 mm︱ 15-100 m/min︱ 515 mm︱capacity 90 degrees: round 330 mm︱capacity 90 degrees: square 320 mm︱capacity 90 degrees: flat 510x320 mm︱ 320 mm︱ 320 mm︱ 350x320 mm︱ 230 mm︱ 230 mm︱ 230x310 mm︱ 320 mm︱ 320 mm︱ 380x320 mm︱ 250 mm︱ 250 mm︱ 250x320 mm︱total power requirement 4 kW︱Weight 1190 kg︱
            dimensions of saw-band 4640x34x1,1 mm
            15-100 m/min
            515 mm
            capacity 90 degrees: round 330 mm
            capacity 90 degrees: square 320 mm
            capacity 90 degrees: flat 510x320 mm
            320 mm
            320 mm
            350x320 mm
            230 mm
            230 mm
            230x310 mm
            320 mm
            320 mm
            380x320 mm
            250 mm
            250 mm
            250x320 mm
            total power requirement 4 kW
            Weight 1190 kg
          Datasheet
          Request / Contact
          б / у Ленточные пилы ZIMMER Z 185 / R


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010730 · Band Saw

          ZIMMER - Z 185/R - - NEU -

          Technical details
          dimensions of saw-band 2085x20x0,9 mm︱capacity 90 degrees: round 185 mm︱capacity 90 degrees: square 150x150 mm︱capacity 90 degrees: flat 220x150 mm︱ 110 mm︱ 100x100 mm︱ 110x90 mm︱capacity 60 degrees: round 70 mm︱capacity 60 degrees: square 70x70 mm︱capacity 60 degrees: flat 70x70 mm︱voltage 230 V︱sawband speed 30-75 m/min.︱ 230 mm︱total power requirement 2,0 kW︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 1280x550x1480 mm︱
          Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet
            dimensions of saw-band 2085x20x0,9 mm
            capacity 90 degrees: round 185 mm
            capacity 90 degrees: square 150x150 mm
            capacity 90 degrees: flat 220x150 mm
            110 mm
            100x100 mm
            110x90 mm
            capacity 60 degrees: round 70 mm
            capacity 60 degrees: square 70x70 mm
            capacity 60 degrees: flat 70x70 mm
            voltage 230 V
            sawband speed 30-75 m/min.
            230 mm
            total power requirement 2,0 kW
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 1280x550x1480 mm
            Description :
            Domestic equipments:
            - stepless, electronic speed control
            - Optional hydraulically controlled or manual belt arm lowering
            - Saw arm can be swiveled up to 60 ° right
            - quick release vice
            - Band guide with 8 ball bearings
            - Hydraulic saw blade clamping with clamping pressure display and strip break-off
            - Including coolant device
            - incl. machine cabinet
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEP Shark 281 CCS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10048 · Band Saw

          MEP - Shark 281 CCS - - Neu -

          Technical details
          dimensions of saw-band 2950x27x0,9 mm︱ 36/72 m/min︱ 285 mm︱capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 230 mm︱capacity 90 degrees: flat 280x200 mm︱capacity 45 degrees: round 190 mm︱capacity 45 degrees: square 180 mm︱capacity 45 degrees: flat 180x180 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 110 mm︱capacity 60 degrees: flat 110x110 mm︱total power requirement 1,5/1,8 kW︱weight 375 kg︱dimensions 1700x1000x1650 mm︱
          Domestic equipments: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed
            dimensions of saw-band 2950x27x0,9 mm
            36/72 m/min
            285 mm
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 230 mm
            capacity 90 degrees: flat 280x200 mm
            capacity 45 degrees: round 190 mm
            capacity 45 degrees: square 180 mm
            capacity 45 degrees: flat 180x180 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 110 mm
            capacity 60 degrees: flat 110x110 mm
            total power requirement 1,5/1,8 kW
            weight 375 kg
            dimensions 1700x1000x1650 mm
            Description :
            Domestic equipments:
            - with semi-automatic lowering
            - The CUT CONTROL SYSTEM allows semi-automatic lowering of the
            Saw bow by the weight of the saw head
            - The lowering speed is infinitely regulated. Single cuts can do so
            be carried out with uniform feed
          Datasheet
          Request / Contact
          б / у Ленточные пилы ZIMMER Z 241 / R


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010760 · Band Saw

          ZIMMER - Z 241/R - - Neu -

          Technical details
          capacity 90 degrees: round 220 mm︱capacity 90 degrees: square 210x210 mm︱capacity 90 degrees: flat 230x185 mm︱ 150 mm︱ 150x150 mm︱ 150x210 mm︱ 90 mm︱ 90x90 mm︱ 90x180 mm︱dimensions of saw-band 2450x27x0,9 mm︱cutting speed 36/72 m/min︱work height max. 915 mm︱total power requirement 1,2 kW︱weight of the machine ca. 225 kg︱dimensions of the machine ca. 1550x870x1740 mm︱
          Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position. Standard features: - Hydraulic cylinder - emulsion pump - Eccentric tensioner - Underframe - saw blade - 400V plug 16A
            capacity 90 degrees: round 220 mm
            capacity 90 degrees: square 210x210 mm
            capacity 90 degrees: flat 230x185 mm
            150 mm
            150x150 mm
            150x210 mm
            90 mm
            90x90 mm
            90x180 mm
            dimensions of saw-band 2450x27x0,9 mm
            cutting speed 36/72 m/min
            work height max. 915 mm
            total power requirement 1,2 kW
            weight of the machine ca. 225 kg
            dimensions of the machine ca. 1550x870x1740 mm
            Description :
            Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position.

            Standard features:
            - Hydraulic cylinder
            - emulsion pump
            - Eccentric tensioner
            - Underframe
            - saw blade
            - 400V plug 16A
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEBA MEBAswing 320 G-HSS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010546 · Band Saw

          MEBA - MEBAswing 320 G-HSS - - Neu -

          Technical details
          15-150 m/min︱capacity 90 degrees: round 325 mm︱capacity 90 degrees: flat 500 x 300 mm︱capacity 45 degrees: round 300 mm︱capacity 45 degrees: flat 300 x 300 mm︱ 200 mm︱ 200 x 200 mm︱ 60 mm︱dimensions of saw-band 4200 x 34 x 1,1 mm︱ 165 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 3 kW︱dimensions 1300 x 2050 x 1400 mm︱weight 910 kg︱
          Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high performance package version "HSS": Hydraulic lifting and lowering of the Sawing frame and hydraulic clamping of the sawing material. stepless hydraulic cutting and feed regulation. Display lowering speed about scale. Display of cutting pressure via pressure gauge. Rapid traverse reduction of the Sawing frame via pushbutton to material edge - Frequency-controlled AC drive 15-150 m / min, 3 kW - Hydraulic material full lift voltage - Hydraulic lifting and lowering of the saw frame - Hydraulic clamping of the material
            15-150 m/min
            capacity 90 degrees: round 325 mm
            capacity 90 degrees: flat 500 x 300 mm
            capacity 45 degrees: round 300 mm
            capacity 45 degrees: flat 300 x 300 mm
            200 mm
            200 x 200 mm
            60 mm
            dimensions of saw-band 4200 x 34 x 1,1 mm
            165 mm
            min. dia. 5 mm
            work height max. 750 mm
            total power requirement 3 kW
            dimensions 1300 x 2050 x 1400 mm
            weight 910 kg
            Description :
            Standard equipment:
            - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy
            according to scale. The miter turning point is the point of intersection between saw band and
            Material system, thereby no change in the length dimension
            - At each angular position of the saw frame, the material is parallel in 90°
            tightened
            - Complete coolant device with electric submersible pump
            - Machine stand with chip collecting tray
            - Precise saw band carbide roller guide, saw blade brush
            - 1 saw blade on machine 4-6 ZpZ
            - MEBA high performance package version "HSS": Hydraulic lifting and lowering of the
            Sawing frame and hydraulic clamping of the sawing material. stepless
            hydraulic cutting and feed regulation. Display lowering speed
            about scale. Display of cutting pressure via pressure gauge. Rapid traverse reduction of the
            Sawing frame via pushbutton to material edge
            - Frequency-controlled AC drive 15-150 m / min, 3 kW
            - Hydraulic material full lift voltage
            - Hydraulic lifting and lowering of the saw frame
            - Hydraulic clamping of the material
          Datasheet
          Request / Contact
          б / у Ленточные пилы ZIMMER Z 125 / R


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010761 · Band Saw

          ZIMMER - Z 125/R - - NEU -

          Technical details
          capacity 90 degrees: round 125 mm︱capacity 90 degrees: square 125x125 mm︱capacity 90 degrees: flat 130x125 mm︱ 80 mm︱ 80x80 mm︱ 80x80 mm︱capacity 60 degrees: round 80 mm︱capacity 60 degrees: square 50x50 mm︱capacity 60 degrees: flat 80x80 mm︱sawband speed 30-80 m/min.︱dimensions of saw-band 1440x13x0,65 mm︱ 190 mm︱output 230 V︱weight of the machine ca. 19 kg︱dimensions of the machine ca. 650x310x450 mm︱
          Domestic equipments: - Stepless speed regulation - Saw arm can be swiveled up to 60 ° right - Tape guides with 8 ball bearings - with stop
            capacity 90 degrees: round 125 mm
            capacity 90 degrees: square 125x125 mm
            capacity 90 degrees: flat 130x125 mm
            80 mm
            80x80 mm
            80x80 mm
            capacity 60 degrees: round 80 mm
            capacity 60 degrees: square 50x50 mm
            capacity 60 degrees: flat 80x80 mm
            sawband speed 30-80 m/min.
            dimensions of saw-band 1440x13x0,65 mm
            190 mm
            output 230 V
            weight of the machine ca. 19 kg
            dimensions of the machine ca. 650x310x450 mm
            Description :
            Domestic equipments:
            - Stepless speed regulation
            - Saw arm can be swiveled up to 60 ° right
            - Tape guides with 8 ball bearings
            - with stop
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEBA MEBAswing 230 DG


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010548 · Band Saw

          MEBA - MEBAswing 230 DG - - Neu -

          Technical details
          28/56 m/min︱dimensions of saw-band 2720 x 27 x 0,9 mm︱capacity 90 degrees: round 230 mm︱capacity 90 degrees: flat 300 x 150 mm︱capacity 45 degrees: round 170/180 mm︱capacity 45 degrees: flat 200 x 70/200 x 180 mm︱ 110 mm︱ 120x80 mm︱ 20 mm︱min. dia. 5 mm︱work height max. 735 mm︱total power requirement 1,0/1,5 kW︱dimensions 1420 x 840 x 1230 mm︱Weight 250 kg︱
          Standard equipment: - Fast miter adjustment by scale - miter turning point is the point of intersection between saw blade and material system, no changes in the length measure - Manual material tension - at each angular position of the saw frame is the Material stretched parallel in 90 ° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - Machine stand with chip collecting tray - saw blade drive with limit stop - Precise saw band carbide roller guide Additional standard equipment 230 G / 230 DG: - Material stop with scale 0-500 mm - Complete coolant system with electric submersible pump
            28/56 m/min
            dimensions of saw-band 2720 x 27 x 0,9 mm
            capacity 90 degrees: round 230 mm
            capacity 90 degrees: flat 300 x 150 mm
            capacity 45 degrees: round 170/180 mm
            capacity 45 degrees: flat 200 x 70/200 x 180 mm
            110 mm
            120x80 mm
            20 mm
            min. dia. 5 mm
            work height max. 735 mm
            total power requirement 1,0/1,5 kW
            dimensions 1420 x 840 x 1230 mm
            Weight 250 kg
            Description :
            Standard equipment:
            - Fast miter adjustment by scale
            - miter turning point is the point of intersection between saw blade and material system,
            no changes in the length measure
            - Manual material tension - at each angular position of the saw frame is the
            Material stretched parallel in 90 °
            - Cutting pressure reduction by weight of the heavy, torsionally stiff
            Sawing frame and fine adjustment depending on the material cross section via hydraulic
            damping cylinder
            - Machine stand with chip collecting tray
            - saw blade drive with limit stop
            - Precise saw band carbide roller guide

            Additional standard equipment 230 G / 230 DG:
            - Material stop with scale 0-500 mm
            - Complete coolant system with electric submersible pump
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEBA MEBAswing 230 G


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010603 · Band Saw

          MEBA - MEBAswing 230 G - - Neu -

          Technical details
          dimensions of saw-band 2720 x 27 x 0,9 mm︱sawband speed 28/56 m/min︱capacity 90 degrees: round 230 mm︱capacity 90 degrees: flat 300 x 150 mm︱capacity 45 degrees: round 180 mm︱capacity 60 degrees: flat 200 x 180 mm︱ 110 mm︱ 120 x 80 mm︱min. dia. Ø 5 mm︱ 35 mm︱work height max. 735 mm︱weight of the machine ca. 230 kg︱dimensions of the machine ca. 1420 x 840 x 1230 mm︱
          Standard equipment: - Fast miter adjustment from 90 ° - 30 ° stepless to 0.5 ° accuracy Scale. The miter turning point is the point of intersection between saw band and Material plant, thereby no change in the length dimension - End stops at 30 ° + 45 ° left - Material quick tension: At each angular position of the saw frame is the Material stretched parallel in 90 ° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - Complete coolant system with electric submersible pump - Machine stand with chip collecting tray - Material stop with scale up to 500 mm - saw blade drive with limit stop - Precise saw band carbide roller guide, saw blade brush - lacquer silver gray / blue gray (RAL 7001 / RAL 7031) - 1 saw blade on the machine 4/6 ZpZ - Operating instructions and spare parts list on CD-ROM
            dimensions of saw-band 2720 x 27 x 0,9 mm
            sawband speed 28/56 m/min
            capacity 90 degrees: round 230 mm
            capacity 90 degrees: flat 300 x 150 mm
            capacity 45 degrees: round 180 mm
            capacity 60 degrees: flat 200 x 180 mm
            110 mm
            120 x 80 mm
            min. dia. Ø 5 mm
            35 mm
            work height max. 735 mm
            weight of the machine ca. 230 kg
            dimensions of the machine ca. 1420 x 840 x 1230 mm
            Description :
            Standard equipment:
            - Fast miter adjustment from 90 ° - 30 ° stepless to 0.5 ° accuracy
            Scale. The miter turning point is the point of intersection between saw band and
            Material plant, thereby no change in the length dimension
            - End stops at 30 ° + 45 ° left
            - Material quick tension: At each angular position of the saw frame is the
            Material stretched parallel in 90 °
            - Cutting pressure reduction by weight of the heavy, torsionally stiff
            Sawing frame and fine adjustment depending on the material cross section via hydraulic
            damping cylinder
            - Complete coolant system with electric submersible pump
            - Machine stand with chip collecting tray
            - Material stop with scale up to 500 mm
            - saw blade drive with limit stop
            - Precise saw band carbide roller guide, saw blade brush
            - lacquer silver gray / blue gray (RAL 7001 / RAL 7031)
            - 1 saw blade on the machine 4/6 ZpZ
            - Operating instructions and spare parts list on CD-ROM
          Datasheet
          Request / Contact
          б / у Ленточные пилы MEP Shark 281 SXI EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010802 · Band Saw

          MEP - Shark 281 SXI EVO - - 2019 -

          Technical details
          36/72 m/min︱ 285 mm︱capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 230 mm︱capacity 90 degrees: flat 280x200 mm︱capacity 45 degrees: round 190 mm︱capacity 45 degrees: square 180 mm︱capacity 45 degrees: flat 180x180 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 110 mm︱capacity 60 degrees: flat 110x110 mm︱dimensions of saw-band 2950 x 27 x 0,9 mm︱output 1,5 / 1,8 kW︱Weight 435 kg︱dimensions 1700x1000x1840 mm︱
          Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens
            36/72 m/min
            285 mm
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 230 mm
            capacity 90 degrees: flat 280x200 mm
            capacity 45 degrees: round 190 mm
            capacity 45 degrees: square 180 mm
            capacity 45 degrees: flat 180x180 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 110 mm
            capacity 60 degrees: flat 110x110 mm
            dimensions of saw-band 2950 x 27 x 0,9 mm
            output 1,5 / 1,8 kW
            Weight 435 kg
            dimensions 1700x1000x1840 mm
            Description :
            Semi-automatic function:
            - Vice closes and engine starts
            - Saw head lowers for the cut
            - Engine shuts off
            - Saw head lifts - vise opens
          Datasheet
          Request / Contact


          Find the best deal on a band saw at LagerMaschinen
          Your new band saw is waiting for you at LagerMaschinen

          The term 'band saw' refers to a large range of products with a broad spectrum of functions. Depending on the blade in use band saws can be used for precise and detailed cutting as well as mass chopping and ripping. The multi-functional nature of the band saw makes it a great investment for businesses as one machine can meet a wide variety of needs. If you're in the market for a used band saw check out the great variety available at LagerMaschinen.

          Band saws offer versatility efficiency and accuracy

          Band saws have many advantages over other types of cutting methods. Since a band saw can be powered in a variety of ways including wind and steam power they can be utilized in green environmentally conscious manufacturing. Band saws are suited to cutting metal wood and other materials making them versatile and functional. Depending on the blade size a band saw can do both precision cutting and mass chopping. Find the best used band saws at LagerMaschinen!

          Make the most of your money and time with a trip to LagerMaschinen

          Investing in used machinery is a smart move for anyone looking to minimize cost and hassle. Used machines offer a high level of quality without cutting deeply into your budget. LagerMaschinen is the ideal forum for shopping for used equipment such as a band saw. The user-friendly interface makes the browsing and buying process a breeze. Shop by location specific need or price and find the perfect band saw or other machine for your needs!