,
Европейская сеть дилеров складской техники

Bitte einensuchbegriff eingeben - Пожалуйста, введите поисковый запрос
Категория:
    Производитель:
      Машины:
        Трейдер:

          Crop shear

          Machinelist: Crop shear


          Crop shear

          used Sheet metal working / shaeres / bending Crop shear FIMI


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05986 · Crop shear

          FIMI - - - -

          Technical details

          CONSTRUCTION CROP SHEAR (HYDRAULICALLY) crop length max. 500 mm execution in welded construction hydraulic cut from below
            Description :
            CONSTRUCTION CROP SHEAR (HYDRAULICALLY)

            crop length max. 500 mm
            execution in welded construction
            hydraulic cut from below



        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • used Sheet metal working / shaeres / bending Crop shear HSK HSK / S 530 x 4


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0218 · Crop shear

          HSK - HSK / S 530 x 4 - - 2014 -

          Technical details



        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • used Sheet metal working / shaeres / bending Crop shear NN


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05983 · Crop shear

          NN - - - 1995 -

          Technical details

          construction CUTTING SHEAR (HYDRAULIC SHEAR - double cut block type) machine mounted on base frame construction construction (double-cut-block-type) 2-column construction system cut-block I and cut-block II stacked mounted table with 2-HI rolls infeed driver unit daylight width 400 mm roll construction rubberized roll width 400 mm adjustment – upper roll manual (hand wheel) motor power 0,37 kW table – lifting / lowering pneumatical (cylinder) cut-block I (upper cut-block) adjustment (cutting procedure) upper knife cut-block II (lower cut-block) adjustment (cutting procedure) lower knife cutting procedure (cut-block I und II) hydraulically control unit mounted on stand control cabinet mounted on base frame construction hydraulic unit not available
            Description :
            construction CUTTING SHEAR (HYDRAULIC SHEAR - double cut block type)

            machine mounted on base frame construction
            construction (double-cut-block-type) 2-column construction
            system cut-block I and cut-block II stacked
            mounted table with 2-HI rolls infeed driver unit
            daylight width 400 mm
            roll construction rubberized
            roll width 400 mm
            adjustment – upper roll manual (hand wheel)
            motor power 0,37 kW
            table – lifting / lowering pneumatical (cylinder)

            cut-block I (upper cut-block)
            adjustment (cutting procedure) upper knife
            cut-block II (lower cut-block)
            adjustment (cutting procedure) lower knife
            cutting procedure (cut-block I und II) hydraulically
            control unit mounted on stand
            control cabinet mounted on base frame construction

            hydraulic unit not available


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • used Sheet metal working / shaeres / bending Crop shear NN


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-059851 · Crop shear

          NN - - - -

          Technical details

          construction CUTTING SHEAR (CROP SHEAR - HYDRAULICALLY) daylight width: 1.560 mm material thickness (stainless steel): 1,50 mm at 650 Nmm² knife length: 1.500 mm - knives bifid (length each 775 mm) cutting angle adjustment mechanically accessories: machine mounted on base frame infeed side - mounted conveyor roll / infeed table adjustment (cutting process) from the bottom (lower knife block) upper knife block fixed in machine frame hydraulic unit integrated in frame construction no. - set of knives (1 set = 4 pieces): 3 1 set (4 pieces) mounted in the machine 1 set (4 pieces) as spare part (knives in used condition) 1 set (4 pieces) as spare part (knives new / original packed)
            Description :
            construction CUTTING SHEAR (CROP SHEAR - HYDRAULICALLY)

            daylight width: 1.560 mm
            material thickness (stainless steel): 1,50 mm at 650 Nmm²
            knife length: 1.500 mm - knives bifid (length each 775 mm)
            cutting angle adjustment mechanically

            accessories:
            machine mounted on base frame
            infeed side - mounted conveyor roll / infeed table
            adjustment (cutting process) from the bottom (lower knife block)
            upper knife block fixed in machine frame
            hydraulic unit integrated in frame construction
            no. - set of knives (1 set = 4 pieces): 3
            1 set (4 pieces) mounted in the machine
            1 set (4 pieces) as spare part (knives in used condition)
            1 set (4 pieces) as spare part (knives new / original packed)



        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • used Sheet metal working / shaeres / bending Crop shear SCHLEICHER


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0598 · Crop shear

          SCHLEICHER - - - 1992 -

          Technical details

          construction CUTTING SHEAR (HYDRAULIC SHEAR - CROP SHEAR) stroke adjustment hydraulically by steering rack press roll (guide roll) stroke adjustment hydraulically by steering rack roll width 1.800 mm roll – Ø 350 mm hydraulic unit not available dimensions (L x W x H): cutting shear unit app. 3.350 x 1.380 x 2.800 mm 1 pallet (2 hydraulic cylinders) app. 1.500 x 800 x 400 mm weight: cutting shear unit 8.300 kg 1 pallet (2 hydraulic cylinders) 200 kg
            Description :
            construction CUTTING SHEAR (HYDRAULIC SHEAR - CROP SHEAR)

            stroke adjustment hydraulically by steering rack
            press roll (guide roll)
            stroke adjustment hydraulically by steering rack
            roll width 1.800 mm
            roll – Ø 350 mm

            hydraulic unit not available

            dimensions (L x W x H):
            cutting shear unit app. 3.350 x 1.380 x 2.800 mm
            1 pallet (2 hydraulic cylinders) app. 1.500 x 800 x 400 mm

            weight:
            cutting shear unit 8.300 kg
            1 pallet (2 hydraulic cylinders) 200 kg


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • used Sheet metal working / shaeres / bending Crop shear SUNDWIG


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-05982 · Crop shear

          SUNDWIG - - - 1968 -

          Technical details

          construction CUTTING SHEAR (HYDRAULIC SHEAR - CROP SHEAR) reference material (tensile strength) max. 40 - 70 kp/mm² at 0,35 – 3 mm reference material (tensile strength) max. 40 kp/mm² at 4 mm operating mode – upper cutter bar motor driven (power 7,5 kW) operating mode – lower cutter bar fixed crop shear movable on base frame hydraulically hydraulic unit not available dimension (L x W x H): crop shear app. 1.850 x 650 x 1.850 mm base frame app. 3.100 x 650 x 3.000 mm weight: crop shear 2.340 kg base frame 360 kg
            Description :
            construction CUTTING SHEAR (HYDRAULIC SHEAR - CROP SHEAR)

            reference material (tensile strength) max. 40 - 70 kp/mm² at 0,35 – 3 mm
            reference material (tensile strength) max. 40 kp/mm² at 4 mm
            operating mode – upper cutter bar motor driven (power 7,5 kW)
            operating mode – lower cutter bar fixed
            crop shear movable on base frame hydraulically

            hydraulic unit not available

            dimension (L x W x H):
            crop shear app. 1.850 x 650 x 1.850 mm
            base frame app. 3.100 x 650 x 3.000 mm

            weight:
            crop shear 2.340 kg
            base frame 360 kg


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

          •   
          •   
          • 1  

          TOP Manufacturer: