Cutting machines

cross-section width: -- mm︱cross-section heigth: -- mm︱feed: -- mm︱

---

cross-section width: 800 mm︱cross-section heigth: 15 mm︱feed: ab ca. 5 mm︱speed of feed: m/min︱cuts max.: Schnitte/m︱

---

condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards; - New on-board system machine; - New control cabinet with PLC system Siemens S7-1200; - CE marking; - Instructions for use and maintenance in English or German language

cross-section width: 700 mm︱cross-section heigth: 500 mm︱feed: -- mm︱

---

Condition: used, overhauled Specification: splitter for rubber bales - overhauled with CE - cross section width max.ca.: 700 mm - cross section height max. approx.: 500 mm - cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz - Infeed roller conveyor for product transport - Machine stands on a raised pedestal - Two-hand safety control for driving the blade movement - Safety guard according to current standards - New control cabinet - New on-board system machine - Operating and maintenance manual in English - CE marking - Paintwork: according to customer requirements - Refurbished with 1 year warranty - CE marking; Option: - Output roller conveyor new

cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱

---

cross-section width: 90 mm︱cross-section heigth: 35 mm︱feed: 1.600 mm︱

---

cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱

---

cross-section width: 100 mm︱cross-section heigth: 30 - 40 mm︱feed: 0,1 - 99.999,9 mm︱speed of feed: 1 - 120 m/min︱

---

Condition: used, good condition Specification: Circular Knife Cutting Machine - second-hand with wet and dry cut for cutting to length of rubber and plastic hoses as well as rubber profiles with steel inlay - cross section max.: 100 mm - Cross-section height max.: 30 mm - With special inlet also max.: 40 mm - Feed speed: 1 - 120 m/min - Feed drive: Stepper motor - circular knife feed: servo motor / linear axis - Circular knife drive: high-speed AC motor - Engine power: 3,5 KW - Usable speed range: 3,000-6,000 rpm for the use of saw blades, circular knives, cutting discs - Circular knife diameter max.: 270 mm - Length adjustment: 0.1 - 99,999.9 mm - in steps: 0.1 mm - SPS control: Siemens Simatik S7 - Operation: Siemens color touch panel - Material direction: right - left - Inlet height: 1,000 - 1,100 mm - Operating voltage: 3 x 400V, 50Hz, 32A - Compressed air: 6 bar - Weight approx.: 800 kg - Dimensions LxWxH: 1,700 x 960 x 2,020 mm Documentation available! pecial equipment/possible machine options: - Gap detection - die-cutting module - Cutting to mark - Error cutting (cutting of marked profile) - follow-up measurement - Profile blow-off device - Material standstill monitoring

cross-section width: -- mm︱cross-section heigth: -- mm︱feed: -- mm︱speed of feed: 0,4 - 20 m/min︱

---

cross-section width: 16 mm︱cross-section heigth: 16 mm︱feed: - mm︱speed of feed: 60 m/min︱cuts max.: - Schnitte/m︱

---

Condition: used Specification: Cutting machine for hoses - second-hand - three pneumatic cutting modules: pulling cut - Straight or mitre cut adjustable - two secondary, one horizontal cutting unit - 1 strand or 2 strand operation possible - Cutting force per module: 1,960 N - Bandwidth: 100 mm - Contact length: 200 mm - Belt speed: 60 m/min - Connected load: 0,4 KW - Hose outside diameter max.: 16 mm - Material passage max.: 100 x 30 mm - max. torque: 650 Ncm - Pressure: 6 bar - With length measuring section approx.: 4,000 mm - Dimensions L/W/H approx.: 6,050 x 734 x 1,640 mm - Weight approx.: 800 kg - Material direction from left to right - Mobile version Controller defect

cross-section width: 40 (45) mm︱cross-section heigth: 25 mm︱feed: 1 - 999.999,9 mm︱speed of feed: 1 - 60 m/min︱cuts max.: 100 Schnitte/m︱

---

Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 1750 mm - Operating instructions available!

cross-section width: 5 Schläuche 3-5 mm︱cross-section heigth: 3 - 20 mm︱feed: 1,5 - 50 mm︱

---

Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.: 5 bar - Operating voltage: 3x 400V, 50Hz, N, PE - Paint finish: RAL 6011 reseda green - Weight approx.: 160 kg

cross-section width: 50 (75) mm︱cross-section heigth: 30 mm︱feed: 2 - 999.999,9 mm︱speed of feed: 1 - 40 m/min︱cuts max.: 90 Schnitte/m︱

---

Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - max. diameter: 75 mm - 6 hoses or strands: 10 - 15 mm - 5 hoses or strands: 15 - 20 mm - 4 hoses or strands: 20 - 30 mm - 3 hoses or strands: 30 - 40 mm - 2 hoses or strands: 40 - 50 mm - 1 hose or string: 50 - 75 mm - Cross-section width max.: 50 mm - Cross-section height max.: 30 mm - Feed speed: 6 - 40 m/min, infinitely variable - Cutting capacity max.: 90 cuts/min depending on material and cutting length - Cutting length: 2 - 999,999.9 mm - Step change: 0.1 mm - Feed by servo drive - Cutting by servo drive - Intermittent feed - Drive power approx.: 4 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 1100 kg - Dimensions (L/W/H): 1,900 x 1000 x 1400 mm

cross-section width: 1.550 mm︱cross-section heigth: 100 mm︱feed: 10 - 1.500 mm︱

---

Condition: used, Specification: Cross cutting machine for panels Model POLAR 155 EMC-MONITOR - Working width: 1,550 mm - Insert height approx.: 165 mm depending on material - insertion depth: 1,550 mm - feed: 10 - 1.500 mm - Main drive power: 5,5 KW - Width without storage table: 2,790 mm with storage tables: 3,550 mm - depth: 2,950 mm - height: 1.730 mm - front table length: 750 mm - table height: 900 mm - Weight: 4.120 kg - Pressing pressure min.: 150 kp max.: 4.500 kp - knife thickness: 137,5 mm - Feed speed slow / fast: 2.7 / 15.8 cm/sec.

speed of feed: 40 m/min︱feed: 1 - 99.999,9 mm︱cuts max.: 200 Schnitte/m︱cross-section width: 120 mm︱cross-section heigth: 15 mm︱

---

Condition: used, factory NEW, only approx. 20 hours in operation Specification: Cutting Master 15/130 electro-pneumatic cutting machine - basic machine with cutting unit - cutting unit: punch cut - material W/H: approx. 120 x 15 mm - transport by two drive belts - with a maximum speed of 40 m/min - Contact pressure of the drive belts pneumatically adjustable - Length measurement electronically from 1 - 99,999.9 mm Digital display - Cut pneumatically with adjustable pressure up to 6 bar - Number of pieces selectable from 1 to 99.999 Display digital - Different modes for printer connection and expanding stations, control via external inputs/outputs or RS 232 Connections for material feed and depositing devices - Machine switch-off when the number of pieces is reached or end of cut material - Sensors and pneumatics plugged in - Supply connections: - mains connection 230 V/50 Hz - compressed air 6 bar - Plexiglas cover in the material outlet - Feeding bead 130 mm wide - Contact length approx. 115 mms Including the following options: - Material feed direction: right to left - Adjustable stop, adjustable via spindle with position indicator as limit for the upper belt - Take-off belt, belt length approx. 300 mm, separate drive, 24V DC, 0-45 m/min - Mounting frame made of AL-Ptofiles for mounting the cutting machine machine, take-off belt and protective cover. Other options at extra charge: - Sag control with start/stop operation - Material feed (caterpilla) EP 15/40 R/L

speed of feed: 40 m/min︱feed: 1 - 99.999,9 mm︱cuts max.: 200 Schnitte/m︱cross-section width: 130 mm︱cross-section heigth: 15 mm︱

---

cross-section width: 85 mm︱cross-section heigth: 25 - 40 mm︱feed: 1 - 999,999,9 mm︱speed of feed: 60 m/min︱cuts max.: 100 - 120 Schnitte/m︱

---

cross-section width: 100 mm︱cross-section heigth: 40 mm︱feed: 2 - 999.999,9 mm︱

---

Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to *800 N - Drive: *2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg

volt 380 V︱max. sheet size 600 mm︱ ︱

---