Европейская сеть дилеров складской техники

Категория:
    Производитель:
      Машины:
        Трейдер:

          Window production centre

          Machinelist: Window production centre


          Window production centre

          used Window production: wood Window production centre WEINIG Unicontrol 6 CNC


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-2592 · Window production centre

          WEINIG - Unicontrol 6 CNC - - neuwertig - WEINIG PC-NEXUS

          Technical details
          Tenoning spindle 1 ︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱Control WEINIG PC-NEXUS
          # 2592 Weinig Unicontrol 6 with NC spindles ---------------------------- Machine is currently being checked and processed. Technical data summary (please inquire about any additional accessories included) Pos. 1: cross-cut saw ---------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max .: 400 mm > Motor power: 3.0 kW > Radially pneumatically controlled adjustment path to 8 positions, e.g. for edge rounding from above > Laser guide light to detect the saw section Electronic length stop, mounted on the slitting table, included Positioning of the cross-cut saw integrated in the control. > Length 3500 mm Pos. 2: Tenoning and slotted spindle ---------------------------- > Number of tools: variable, stepless adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max .: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max .: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, stepless adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max .: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle pneumatically controlled axially, 2 positions Rung guide consisting of: Guide ruler in the stop (area synchronous spindle), Rung support bar from above in the area of ??the profile milling unit, vertical right and profiling spindle. Pos. 5: Profile milling unit, horizontal above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 100 mm, 8 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool flight circle max .: 210 mm > Motor power: 3.0 kW Other features ---------------------------- > online capable > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Circulation device for tear-free circulation > Double part package > Return device for one-man operation: slat conveyor > Screen controls > Inclined window installation > Electronic angle display for sloping windows > Industrial PC, PC control / NEXUS > Including Weinig type production program Option: Used window tools The technical characteristics of this machine should match your ideas do not match, please contact us. Our A team with many years of experience will be happy to assist you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)
            Tenoning spindle 1
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            Control WEINIG PC-NEXUS
            Description :
            # 2592 Weinig Unicontrol 6 with NC spindles
            ----------------------------
            Machine is currently being checked and processed.

            Technical data summary
            (please inquire about any additional accessories included)


            Pos. 1: cross-cut saw
            ----------------------------
            > Number of tools: 1 pc.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max .: 400 mm
            > Motor power: 3.0 kW
            > Radially pneumatically controlled adjustment path to 8 positions,
            e.g. for edge rounding from above
            > Laser guide light to detect the saw section

            Electronic length stop, mounted on the slitting table, included
            Positioning of the cross-cut saw integrated in the control.
            > Length 3500 mm

            Pos. 2: Tenoning and slotted spindle
            ----------------------------
            > Number of tools: variable, stepless adjustment NC axis
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max .: 320 mm
            > Motor power: 11 kW


            Pos. 3: 1st profiling spindle (synchronous spindle)
            ----------------------------
            > Position: vertical right
            > Number of tools: 1 pc.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max .: 232 mm
            > Motor power: 7.5 kW


            Pos. 4: 2nd profiling spindle
            ----------------------------
            > Position: vertical right
            > Number of tools: variable, stepless adjustment NC axis
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max .: 232 mm
            > Motor power: 11 kW

            2 feed rollers opposite the spindle pneumatically controlled axially, 2
            positions

            Rung guide consisting of:
            Guide ruler in the stop (area synchronous spindle),
            Rung support bar from above in the area of ??the profile milling unit, vertical
            right
            and profiling spindle.


            Pos. 5: Profile milling unit, horizontal above
            ----------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed ??9,000 rpm
            > Tool flight circle max. 130 mm
            > Axial adjustment range 30 mm, 8 positions
            > Radial adjustment range 125 mm, 8 positions


            Pos. 6: 3rd profiling spindle (fitting spindle)
            ----------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment range 100 mm, 8 positions
            > Spindle speed: 5,850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max .: 210 mm
            > Motor power: 3.0 kW

            Other features
            ----------------------------
            > online capable
            > Electric feed height adjustment including mechanical digital display
            and manual feed bar clamping
            > Circulation device for tear-free circulation
            > Double part package
            > Return device for one-man operation: slat conveyor
            > Screen controls
            > Inclined window installation
            > Electronic angle display for sloping windows
            > Industrial PC, PC control / NEXUS
            > Including Weinig type production program

            Option:
            Used window tools


            The technical characteristics of this machine should match your ideas
            do not match, please contact us. Our
            A team with many years of experience will be happy to assist you with any
            adjustments
            or when looking for a machine that meets your requirements!

            (technical data according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre HABERKORN Nutaggregat von unten


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5968 · Window production centre

          HABERKORN - Nutaggregat von unten - - Neu -

          Technical details
          Tenoning spindle , ︱Number of milling agregates 1 St.︱Spindle diameter 40 mm︱
          Grooving unit Angle 700 x 600 mm height adjustable about 850 - 1000 mm Feed with 4 wheels, 4 speed Motor about 2.2 kW, 3000 rpm. Shaft diameter 40 mm, with left-hand threads Wavelength 80 mm Nuter pneumatic up-down Stop for Nuter top turret with 6 adjustable stop screws Absaugdurchmesser 80 mm Tool diameter max. 300 mm control: -------------- pre-installed with 16 A Euro plug 400 V AC, 2.9 KW, 50 Hz Colour: RAL 7035 light gray (technical details according to manufacturer - without guarantee!)
            Tenoning spindle ,
            Number of milling agregates 1 St.
            Spindle diameter 40 mm
            Description :
            Grooving unit Angle

            700 x 600 mm
            height adjustable about 850 - 1000 mm
            Feed with 4 wheels, 4 speed
            Motor about 2.2 kW, 3000 rpm.
            Shaft diameter 40 mm, with left-hand threads
            Wavelength 80 mm
            Nuter pneumatic up-down
            Stop for Nuter top turret
            with 6 adjustable stop screws
            Absaugdurchmesser 80 mm
            Tool diameter max. 300 mm

            control:
            --------------
            pre-installed with 16 A Euro plug
            400 V AC, 2.9 KW, 50 Hz

            Colour: RAL 7035 light gray

            (technical details according to manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre GUBISCH Centromat CD-Super Online


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6698 · Window production centre

          GUBISCH - Centromat CD-Super Online - - gebraucht -

          Technical details
          Tenoning spindle 4 St.︱Number of milling agregates 6 St.︱Spindle diameter 50 mm︱
          # 945 Gubisch Centromat CD Super ...................................................................................................................................... Production capacity in 8 hours, approx. 150 pcs. Technical details summary (please ask for possibly more included equpment) ...................................................................................................................................... 1 pair Cut-off saw ...................................................................................................................................... > 2 cut-off saw electronic controlled: yes > number of tools: 1 pcs. > number of revolutions of spindle: 3000 rpm > tools diameter maximum: 350 mm > motor power: 3 kW 2 pairs tenoning spindle (1 pair middle/vertical; 1 pair behind/vertical) ...................................................................................................................................... > number of tools: 3 pcs. > spindle stroke: 3x100 mm > number of revolutions of spindle: 4200 rpm > spindle diameter: 50 mm > tool clamping length: 300 mm > tools diameter maximum: 320 mm > motor power: 11 kW 3 profiling spindles vertical right ...................................................................................................................................... > number of tools: 3 pcs. > spindle stroke vertical: 3x100 mm > number of revolutions of spindle: 6000 rpm > spindle diameter: 50 mm > tool clamping length: 300 mm > tools diameter maximum: 230 mm > motor power: 9,2 kW 3 profiling spindles vertical left ...................................................................................................................................... > number of tools: 3 pcs. > spindle stroke vertical: 3x100 mm > number of revolutions of spindle: 6000 rpm > spindle diameter: 50 mm > tool clamping length: 300 mm > tools diameter maximum: 230 mm > motor power: 9,2 kW More features ...................................................................................................................................... > possibility to work online: yes > double piece package: yes > monitor control: yes Option: > 1 used window tool kit IV 68 We also can offer you new window tools IV 78 If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you! Technical details according to manufacturer - without guarantee! 1 window production line Modell CENTROMAT CD SUPER – chained - consisting of: 1 double sided tenoning machine, with 2 multi stroke spindles per side Fabr. GUBISCH Typ CD-Z 1 transport system to the profiling machine Fabr. GUBISCH Typ RF4M 1 profiling machine with 3 left and 3 rigth multi stroke spndles Fabr. GUBISCH Typ CDF 1 crosswise transport system Fabr. GUBISCH Typ RF4M Option: 1 complete window tool kit IV 68 technical data according to manufacturer - without garantee! AUSFÜHRLICHE BESCHREIBUNG: 1 GUBISCH - Fensterfertigungsstraße Typ CENTROMAT-CD-SUPER Leistung 3 - 4 Teile pro Minute mit nachfolgenden Maschinenkomponenten: Pos. 1.: 1 Doppelseitiger Zapfenschneider im Taktverfahren Type CDZ - rechte und linke Seite verfahrbar - Werkstücklänge, max. 3.400 mm Außenmaß - Werkstücklänge, min. 320 mm Brüstungsmaß (LM) (abhängig vom tatsächlichen Werkzeugdurchmesser der Schlitzspindel !) - Werkstückdicke, max. 80 mm - Werkstückdicke, min. 56 mm - Vorschubgeschwindigkeit : im Sägebereich 18 m / Min. im Werkzeugbereich 9 m / Min. im Eilrücklauf 36 m / Min. - beidseitige, elektronische Breitenpositionierung durch Schnellverstellung über Kugelrollspindeln - pneumatische Werkstückspannung - automatische Konterholzeinrichtung mit 6 zusätzl. Konterhölzern im Zubehör - Doppelteilevorrichtung zum Spannen von 2 Werkstücken mit Vereinzelung vor der Fräsmaschine von gleich breiten Teilen mit : max. 2 x 80 mm bzw. 82 mm (Profilgleich), min. Breite 2 x 50 mm - Doppeltaktsteuerung zur Herstellung von Konterprofilen durch zweimaliges Durch- fahren mit unterschiedlichen Hubstellungen. - 4 Motorbremsen Aggregatenanordnung : 1 Paar Akkürzsägen, vorne / oben - horizontal programmgesteuert, über elektronische Positionierachsen - Motorleistung 3,0 kW mit Direktantrieb - Sägeflansch für 80 mm Sägeblattbohrung - Flugkreisdurchmesser 350 mm - Drehzahl 3.000-1 1 Paar Fräsaggregate, mitte / vertikal - Motorleistung 11,0 kW über Riemenantrieb - automatische Stern-Dreieck-Schaltung - Spindeldurchmesser 50 mm - Flugkreisdurchmesser 320 mm - Spannlänge 300 mm, 2-fach-Hub - Hubspindel für 3 Stellungen a 100 mm - Verstellung pneumatisch hoch/tief - vor/zurück - Drehzahl der Spindel ca. 4200 upm - für Werkzeug Null-Höhe 10 mm Hubstellung in oberster Position 10 mm unter Tischauflage Hubstellung in unterster Position 210 mm unter Tischauflage 1 Paar Fräsaggregate, hinten / vertikal - Motorleistung 11,0 kW über Riemenantrieb - automatische Stern-Dreieck-Schaltung - Spindeldurchmesser 50 mm - Flugkreisdurchmesser 320 mm - Spannlänge 300 mm, 2-fach-Hub - Hubspindel für 3 Stellungen a 100 mm - Verstellung pneumatisch hoch/tief - vor/zurück - Drehzahl der Spindel ca. 4200 upm - für Werkzeug Null-Höhe 10 mm Hubstellung in oberster Position 10 mm unter Tischauflage Hubstellung in unterster Position 210 mm unter Tischauflage Pos. 2.: Abschiebevorrichtung und Transportrollenbahn Ca. 7.000 mm lang, mit 2 Antrieben, stufenlos regelbar, zur Fräseinheit, nach links laufend mit pneumatisch gesteuerter Vereinzelung. Pos. 3.: Fräsautomat, Type CDF Original GUBISCH Fräsautomat, komplett und betriebsbereit, wie nachfolgend beschrieben : - Arbeitsbreite max. 170 mm, min. 50 mm - Arbeitshöhe max. 80 mm, min. 56 mm - Holzlänge min. 320 mm, jedoch profilabhängig ! - Vorschub auf zwei Säulen gelagerter schwerer Vorschub. Zum einfachen problemnlosen Werkzeugwechsel über Tischauflage verfahrbar ! - Vorschubantrieb 2,2 kW Geschwindigkeit stufenlos regelbar 5 - 19 m / Min. Vorschubrücklauf im Tippbetrieb mit Sicherheits- schlüsselschalter. - Vorschubhöhenverstellung 0,75 kW elektromotorisch - Vorschubwalzeneinheiten Walzenandruck = pneumatisch kurzer Walzenabstand - Vorschubwalzen 3, gegenüber den linken Spindeln pneumatisch horizontal verschiebbar mit Kollisionsschutz - Tische und Anschläge im Bereich der Fräswerkzeuge mit spez. Schichtholzlippen/Platten ausgelegt. - Tischabblasung für horizontale Tische, jeweils vor Einlauf eines neues Werkstückes. - Gleitmittelpumpe automatisch, mit Mengendrosselung und Zeittaktschaltung - Elektrische Ausrüstung aller Maschinen: nach VDE für 380 V, 50 Hz. Schutzart IP 54, NOT-AUS-Schalter - Steuerung Direktschaltung bis einschl. 5,5 kW. Ab 7,5 kW einschl. automat. Stern-Dreieck-Schaltung - Maschinenabdeckung Vorderseite aufklappbar mit Plexiglasfenster, ausgefüllt mit Lärmdämmaterial Aggregatenanordnung : 1. SPINDEL - Lage der Spindel vertikal, rechts - Funktion Profilherstellung - Motorleistung 9,2 kW - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Spannhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 70 mm, vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U - Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge 2. SPINDEL - Lage der Spindel vertikal, rechts - Funktion Profilherstellung - Motorleistung 9,2 kW, Riemenantrieb - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Nutzhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 70 mm, vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U - Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge 3. SPINDEL - Lage der Spindel vertikal, rechts - Funktion Profilherstellung - Motorleistung 9,2 kW - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Spannhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 70 mm, vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U-Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge 4. SPINDEL - Lage der Spindel vertikal links - Funktion Profilherstellung - Motorleistung 9,2 kW - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Spannhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 50 - 170 mm, vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U-Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge 5. SPINDEL - Lage der Spindel vertikal links - Funktion Profilherstellung - Motorleistung 9,2 kW - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Spannhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 50 - 170 mm, vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U-Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge 6. SPINDEL - Lage der Spindel vertikal links - Funktion Profilherstellung - Motorleistung 9,2 kW - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Spannhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 50 - 170 mm vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U-Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge Rechte Anschläge : Nr. 1, 2 und 3 Pneumatisch programmgesteuert 0 oder 1 mm Spanabnahme Linke Anschläge : Pneumatisch gesteuert für unterschiedliche Holzbreiten. · elektronische Breitenverstellung der linken Spindeln, programmeingebunden · 6 Motorbremsen Pos. 4 Längs-Querförderer als Abnahmestation, Puffer für 350 mm bis 3500 mm lange Werkstücke, Pufferstrecke ca. 1400 mm. Pos. 5 Elektronische Zentralsteuerung der Anlage durch das GUBISCH-Maschinenablaufprogramm - Bedienungsterminal mit Industrie-PC und Bildschirm - 120 Kombiprogramme frei vom Anwender einzugeben / programmierbar. 1 Programm enthält alle Werkzeugkombinationen für die Quer- und Längsbearbeitung - je 200 Einzelprogramme für Endprofil links, rechts Längsprofil links, rechts - Stücklistenspeicher zur Aufnahme der Holzdatei/Listen - Online Schnittstelle RS 232/20 mA technische Angaben laut Hersteller - ohne Gewähr! Mechanische, elektrische und elektronische Verkettung innerhalb der Anlage. * Alle Maschinenhauben mit Antidröhnfolie ausgelegt. * Unsere Maschinen sind nach deutschen Vorschriften und Normen ausgelegt ! * Maschinen komplett mit allen Bedienungswerkzeugen, jedoch ohne Bearbeitungswerkzeuge. * Umwehrungen und Schutzgitter sind bauseitig zu stellen, soweit es die Sicherheit betrifft technical data according to manufacturer - without guarantee!
            Tenoning spindle 4 St.
            Number of milling agregates 6 St.
            Spindle diameter 50 mm
            Description :
            # 945 Gubisch Centromat CD Super
            ......................................................................................................................................
            Production capacity in 8 hours, approx. 150 pcs.


            Technical details summary
            (please ask for possibly more included equpment)
            ......................................................................................................................................

            1 pair Cut-off saw
            ......................................................................................................................................
            > 2 cut-off saw electronic controlled: yes
            > number of tools: 1 pcs.
            > number of revolutions of spindle: 3000 rpm
            > tools diameter maximum: 350 mm
            > motor power: 3 kW

            2 pairs tenoning spindle (1 pair middle/vertical; 1 pair behind/vertical)
            ......................................................................................................................................
            > number of tools: 3 pcs.
            > spindle stroke: 3x100 mm
            > number of revolutions of spindle: 4200 rpm
            > spindle diameter: 50 mm
            > tool clamping length: 300 mm
            > tools diameter maximum: 320 mm
            > motor power: 11 kW

            3 profiling spindles vertical right
            ......................................................................................................................................

            > number of tools: 3 pcs.
            > spindle stroke vertical: 3x100 mm
            > number of revolutions of spindle: 6000 rpm
            > spindle diameter: 50 mm
            > tool clamping length: 300 mm
            > tools diameter maximum: 230 mm
            > motor power: 9,2 kW

            3 profiling spindles vertical left
            ......................................................................................................................................

            > number of tools: 3 pcs.
            > spindle stroke vertical: 3x100 mm
            > number of revolutions of spindle: 6000 rpm
            > spindle diameter: 50 mm
            > tool clamping length: 300 mm
            > tools diameter maximum: 230 mm
            > motor power: 9,2 kW

            More features
            ......................................................................................................................................

            > possibility to work online: yes
            > double piece package: yes
            > monitor control: yes

            Option:
            > 1 used window tool kit IV 68
            We also can offer you new window tools IV 78

            If the technical characteristics of this machines donnot fit with your requirements,
            please get in contact with us. Our longtime experienced team is looking forward to support
            you in technical adaptions or in finding a suitable machine for you!

            Technical details according to manufacturer - without guarantee!


            1 window production line Modell CENTROMAT CD SUPER
            – chained - consisting of:

            1 double sided tenoning machine, with 2 multi stroke spindles per side
            Fabr. GUBISCH Typ CD-Z

            1 transport system to the profiling machine Fabr. GUBISCH Typ RF4M

            1 profiling machine with 3 left and 3 rigth multi stroke spndles
            Fabr. GUBISCH Typ CDF

            1 crosswise transport system
            Fabr. GUBISCH Typ RF4M

            Option: 1 complete window tool kit IV 68

            technical data according to manufacturer - without garantee!

            AUSFÜHRLICHE BESCHREIBUNG:
            1 GUBISCH - Fensterfertigungsstraße Typ CENTROMAT-CD-SUPER
            Leistung 3 - 4 Teile pro Minute

            mit nachfolgenden Maschinenkomponenten:

            Pos. 1.: 1 Doppelseitiger Zapfenschneider im Taktverfahren Type CDZ

            - rechte und linke Seite verfahrbar
            - Werkstücklänge, max. 3.400 mm Außenmaß
            - Werkstücklänge, min. 320 mm Brüstungsmaß (LM)
            (abhängig vom tatsächlichen Werkzeugdurchmesser der Schlitzspindel !)

            - Werkstückdicke, max. 80 mm
            - Werkstückdicke, min. 56 mm
            - Vorschubgeschwindigkeit :
            im Sägebereich 18 m / Min.
            im Werkzeugbereich 9 m / Min.
            im Eilrücklauf 36 m / Min.
            - beidseitige, elektronische Breitenpositionierung durch Schnellverstellung
            über Kugelrollspindeln
            - pneumatische Werkstückspannung
            - automatische Konterholzeinrichtung mit 6 zusätzl. Konterhölzern im Zubehör

            - Doppelteilevorrichtung zum Spannen von 2 Werkstücken mit Vereinzelung vor
            der Fräsmaschine von gleich breiten Teilen mit :
            max. 2 x 80 mm bzw. 82 mm (Profilgleich),
            min. Breite 2 x 50 mm

            - Doppeltaktsteuerung zur Herstellung von Konterprofilen durch zweimaliges Durch-
            fahren mit unterschiedlichen Hubstellungen.

            - 4 Motorbremsen

            Aggregatenanordnung :

            1 Paar Akkürzsägen, vorne / oben
            - horizontal programmgesteuert, über elektronische Positionierachsen
            - Motorleistung 3,0 kW mit Direktantrieb
            - Sägeflansch für 80 mm Sägeblattbohrung
            - Flugkreisdurchmesser 350 mm
            - Drehzahl 3.000-1

            1 Paar Fräsaggregate, mitte / vertikal
            - Motorleistung 11,0 kW über Riemenantrieb
            - automatische Stern-Dreieck-Schaltung
            - Spindeldurchmesser 50 mm
            - Flugkreisdurchmesser 320 mm

            - Spannlänge 300 mm, 2-fach-Hub
            - Hubspindel für 3 Stellungen a 100 mm
            - Verstellung pneumatisch hoch/tief - vor/zurück
            - Drehzahl der Spindel ca. 4200 upm
            - für Werkzeug Null-Höhe 10 mm
            Hubstellung in oberster Position 10 mm unter Tischauflage
            Hubstellung in unterster Position 210 mm unter Tischauflage

            1 Paar Fräsaggregate, hinten / vertikal
            - Motorleistung 11,0 kW über Riemenantrieb
            - automatische Stern-Dreieck-Schaltung
            - Spindeldurchmesser 50 mm
            - Flugkreisdurchmesser 320 mm

            - Spannlänge 300 mm, 2-fach-Hub
            - Hubspindel für 3 Stellungen a 100 mm
            - Verstellung pneumatisch hoch/tief - vor/zurück
            - Drehzahl der Spindel ca. 4200 upm
            - für Werkzeug Null-Höhe 10 mm
            Hubstellung in oberster Position 10 mm unter Tischauflage
            Hubstellung in unterster Position 210 mm unter Tischauflage


            Pos. 2.: Abschiebevorrichtung und Transportrollenbahn
            Ca. 7.000 mm lang, mit 2 Antrieben, stufenlos regelbar, zur Fräseinheit,
            nach links laufend mit pneumatisch gesteuerter Vereinzelung.


            Pos. 3.: Fräsautomat, Type CDF

            Original GUBISCH Fräsautomat, komplett und betriebsbereit, wie nachfolgend beschrieben :

            - Arbeitsbreite max. 170 mm, min. 50 mm
            - Arbeitshöhe max. 80 mm, min. 56 mm

            - Holzlänge min. 320 mm, jedoch profilabhängig !

            - Vorschub auf zwei Säulen gelagerter schwerer Vorschub. Zum einfachen
            problemnlosen Werkzeugwechsel über Tischauflage verfahrbar !

            - Vorschubantrieb 2,2 kW

            Geschwindigkeit stufenlos regelbar 5 - 19 m / Min.
            Vorschubrücklauf im Tippbetrieb mit Sicherheits-
            schlüsselschalter.

            - Vorschubhöhenverstellung 0,75 kW elektromotorisch

            - Vorschubwalzeneinheiten Walzenandruck = pneumatisch
            kurzer Walzenabstand
            - Vorschubwalzen 3, gegenüber den linken Spindeln pneumatisch
            horizontal verschiebbar mit Kollisionsschutz

            - Tische und Anschläge im Bereich der Fräswerkzeuge mit spez.
            Schichtholzlippen/Platten ausgelegt.

            - Tischabblasung für horizontale Tische, jeweils vor Einlauf eines
            neues Werkstückes.

            - Gleitmittelpumpe automatisch, mit Mengendrosselung und Zeittaktschaltung

            - Elektrische Ausrüstung aller Maschinen: nach VDE für 380 V, 50 Hz.
            Schutzart IP 54, NOT-AUS-Schalter

            - Steuerung Direktschaltung bis einschl. 5,5 kW.
            Ab 7,5 kW einschl. automat. Stern-Dreieck-Schaltung

            - Maschinenabdeckung Vorderseite aufklappbar mit Plexiglasfenster,
            ausgefüllt mit Lärmdämmaterial

            Aggregatenanordnung :

            1. SPINDEL
            - Lage der Spindel vertikal, rechts
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Spannhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 70 mm, vertikal 200 mm
            für Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U - Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge

            2. SPINDEL
            - Lage der Spindel vertikal, rechts
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW, Riemenantrieb
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Nutzhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 70 mm, vertikal 200 mm
            für Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U - Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge

            3. SPINDEL
            - Lage der Spindel vertikal, rechts
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Spannhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 70 mm, vertikal 200 mm für
            Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U-Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge


            4. SPINDEL
            - Lage der Spindel vertikal links
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Spannhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 50 - 170 mm, vertikal 200 mm für
            Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U-Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge

            5. SPINDEL
            - Lage der Spindel vertikal links
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Spannhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 50 - 170 mm,
            vertikal 200 mm für
            Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U-Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge

            6. SPINDEL
            - Lage der Spindel vertikal links
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Spannhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 50 - 170 mm
            vertikal 200 mm für
            Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U-Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge

            Rechte Anschläge : Nr. 1, 2 und 3
            Pneumatisch programmgesteuert 0 oder 1 mm Spanabnahme

            Linke Anschläge :
            Pneumatisch gesteuert für unterschiedliche Holzbreiten.

            · elektronische Breitenverstellung der linken Spindeln, programmeingebunden

            · 6 Motorbremsen

            Pos. 4
            Längs-Querförderer als Abnahmestation, Puffer für 350 mm bis 3500 mm lange Werkstücke, Pufferstrecke ca. 1400 mm.

            Pos. 5
            Elektronische Zentralsteuerung der Anlage durch das GUBISCH-Maschinenablaufprogramm
            - Bedienungsterminal mit Industrie-PC und Bildschirm
            - 120 Kombiprogramme frei vom Anwender einzugeben / programmierbar. 1 Programm enthält alle Werkzeugkombinationen für die Quer- und Längsbearbeitung
            - je 200 Einzelprogramme für Endprofil links, rechts
            Längsprofil links, rechts
            - Stücklistenspeicher zur Aufnahme der Holzdatei/Listen
            - Online Schnittstelle RS 232/20 mA

            technische Angaben laut Hersteller - ohne Gewähr!

            Mechanische, elektrische und elektronische Verkettung innerhalb der Anlage.

            * Alle Maschinenhauben mit Antidröhnfolie ausgelegt.

            * Unsere Maschinen sind nach deutschen Vorschriften und Normen ausgelegt !

            * Maschinen komplett mit allen Bedienungswerkzeugen, jedoch ohne
            Bearbeitungswerkzeuge.

            * Umwehrungen und Schutzgitter sind bauseitig zu stellen, soweit es die Sicherheit betrifft

            technical data according to manufacturer - without guarantee!


          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 12 CNC


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6327 · Window production centre

          WEINIG - Unicontrol 12 CNC - - gebraucht -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 7 St.︱
          Machine is in operation and can be visited! Condition of the machine is new Weinig Unicontrol 12 CNC - Spindles radial and axial CNC controlled -------------------------------------------------- ------------ With the following processing units: Cutting edge saw -------------------------------------------------- ------------ With laser beam, engine power 3 KW, spindle diameter 40 mm, Tool flying circle 400 mm Axial adjustment via NC axis Adjustment radial pneumatic to 8 positions f. Edge rounding from above Unit from below for edge rounding -------------------------------------------------- ------------ Axial adjustment with crosscut saw Motor 1,5 kW Diameter 20 mm Clamping length 25 mm Tooling circle max. 130 mm Adjustment distance radial pneumatic on / off Spindle and slotted spindle -------------------------------------------------- ------------ Engine power 15 KW Spindle diameter 50 mm Spindle speed 2.800 rpm Tooling circle max. 380 Tool clamping length 640 mm Adjustment axial CNC axis Adjustment travel axial 580 mm Adjustment speed 100 mm / sec. Postprocessing bracket, profile depth 50 mm 1. Profile spindle (same and opposite) -------------------------------------------------- ------------ Engine power 11 KW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axial and radial adjustment via CNC - axis, infinitely variable Profile milling unit horizontal top -------------------------------------------------- ------------ Motor power 3,7 KW Spindle diameter 40 mm Clamping length 40 mm Tool diameter: max. 130 mm Spindle speed 9,000 rpm Adjustment pneumatic to 8 positions axial and radial 2. Profile spindle -------------------------------------------------- ------------ Engine power 11 KW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axial and radial adjustment via CNC - axis - infinitely variable Profile milling unit vertical right at the end of the machine -------------------------------------------------- ------------ Motor power 3,7 KW Spindle diameter 40 mm Adjustment distance max .: 160 mm Spindle speed 5.850 rpm Tooling circle max: 210 mm Adjustment pneumatic to 8 positions axial and radial Profile milling unit horizontally at the bottom in the additional stand -------------------------------------------------- ------------ Engine power 3 KW Spindle diameter 40 mm, Adjustment distance max: 125 mm Spindle speed 5.850 rpm Tool flying circle 200 mm Adjustment pneumatic to 8 positions axial and radial Other accessories -------------------------------------------------- ------------ Length stop CNC - controlled, mounted on the slot table For lengths up to 3500 mm, incl. Positioned cut-off saw integrated in control system. Studio window device, max. 75 ° swivel on both sides Double pack package with automatic separation and transfer Feed rollers are axially clocked with respect to the shaping spindle For narrow and short parts NC axis for feed - height adjustment Rung support strip pneumatically controlled from above for a fold depth Shuttle package: - Synchronization unit with automatic immersion on the 1st profile spindle - Support rail - High / low feed rollers up to the 2nd profile spindle to the Shortening of the path - Software expansion with 100 free encapsulation types Milling trolley for the milling of wings with frame widths of less than 500 mm Automatic pneumatic clamping Central lubrication automatically Air pressure accumulator 40 L PC control NEXUS Automatic reversing system Slat conveyor, including conveyor belt for returning the workpieces To the operator Suction nozzle diameter: Saw: 80 mm Beveling unit under saw: 80 mm Slotted spindle: 140 mm 1. Profile spindle: 140 mm Groove unit from above: 80 mm 2. Profile spindle: 140 mm Fitting spindle 120 mm Groove unit from below: 80 mm Option: ******* Tools Örtli IV 67/77/92 Wood and wood-aluminum (Technical data according to manufacturer - without guarantee).
            Tenoning spindle 1 St.
            Number of milling agregates 7 St.
            Description :
            Machine is in operation and can be visited!


            Condition of the machine is new

            Weinig Unicontrol 12 CNC - Spindles radial and axial CNC controlled
            -------------------------------------------------- ------------
            With the following processing units:

            Cutting edge saw
            -------------------------------------------------- ------------
            With laser beam, engine power 3 KW, spindle diameter 40 mm,
            Tool flying circle 400 mm
            Axial adjustment via NC axis
            Adjustment radial pneumatic to 8 positions f. Edge rounding from above

            Unit from below for edge rounding
            -------------------------------------------------- ------------
            Axial adjustment with crosscut saw
            Motor 1,5 kW
            Diameter 20 mm
            Clamping length 25 mm
            Tooling circle max. 130 mm
            Adjustment distance radial pneumatic on / off


            Spindle and slotted spindle
            -------------------------------------------------- ------------
            Engine power 15 KW
            Spindle diameter 50 mm
            Spindle speed 2.800 rpm
            Tooling circle max. 380
            Tool clamping length 640 mm
            Adjustment axial CNC axis
            Adjustment travel axial 580 mm
            Adjustment speed 100 mm / sec.
            Postprocessing bracket, profile depth 50 mm

            1. Profile spindle (same and opposite)
            -------------------------------------------------- ------------
            Engine power 11 KW
            Spindle diameter 50 mm
            Spindle speed 6,000 rpm
            Tool clamping length 400 mm with counter bearing
            Axial and radial adjustment via CNC - axis, infinitely variable

            Profile milling unit horizontal top
            -------------------------------------------------- ------------
            Motor power 3,7 KW
            Spindle diameter 40 mm
            Clamping length 40 mm
            Tool diameter: max. 130 mm
            Spindle speed 9,000 rpm
            Adjustment pneumatic to 8 positions axial and radial


            2. Profile spindle
            -------------------------------------------------- ------------
            Engine power 11 KW
            Spindle diameter 50 mm
            Spindle speed 6,000 rpm
            Tool clamping length 400 mm with counter bearing
            Axial and radial adjustment via CNC - axis - infinitely variable


            Profile milling unit vertical right at the end of the machine
            -------------------------------------------------- ------------
            Motor power 3,7 KW
            Spindle diameter 40 mm
            Adjustment distance max .: 160 mm
            Spindle speed 5.850 rpm
            Tooling circle max: 210 mm
            Adjustment pneumatic to 8 positions axial and radial


            Profile milling unit horizontally at the bottom in the additional stand
            -------------------------------------------------- ------------
            Engine power 3 KW
            Spindle diameter 40 mm,
            Adjustment distance max: 125 mm
            Spindle speed 5.850 rpm
            Tool flying circle 200 mm
            Adjustment pneumatic to 8 positions axial and radial


            Other accessories
            -------------------------------------------------- ------------

            Length stop CNC - controlled, mounted on the slot table
            For lengths up to 3500 mm, incl. Positioned cut-off saw integrated in control
            system.

            Studio window device, max. 75 ° swivel on both sides

            Double pack package with automatic separation and transfer

            Feed rollers are axially clocked with respect to the shaping spindle
            For narrow and short parts

            NC axis for feed - height adjustment

            Rung support strip pneumatically controlled from above for a fold depth

            Shuttle package:
            - Synchronization unit with automatic immersion on the 1st profile spindle
            - Support rail
            - High / low feed rollers up to the 2nd profile spindle to the
            Shortening of the path
            - Software expansion with 100 free encapsulation types

            Milling trolley for the milling of wings with frame widths of less than 500 mm
            Automatic pneumatic clamping

            Central lubrication automatically

            Air pressure accumulator 40 L

            PC control NEXUS

            Automatic reversing system
            Slat conveyor, including conveyor belt for returning the workpieces
            To the operator

            Suction nozzle diameter:
            Saw: 80 mm
            Beveling unit under saw: 80 mm
            Slotted spindle: 140 mm
            1. Profile spindle: 140 mm
            Groove unit from above: 80 mm
            2. Profile spindle: 140 mm
            Fitting spindle 120 mm
            Groove unit from below: 80 mm


            Option:
            *******
            Tools Örtli IV 67/77/92 Wood and wood-aluminum

            (Technical data according to manufacturer - without guarantee).
          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Fensteranlage CNC


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6704 · Window production centre

          WEINIG - Fensteranlage CNC - - 2008 -

          Technical details
          Tenoning spindle 3 St.︱Number of milling agregates 8 St.︱Spindle diameter 50 mm︱Control
          Weinig UC-Matic window production line ----------------------------------------- Weinig Powermat 500 + Weinig Unirex 2000 + Weinig Unicontrol 15 ! Line can still be viewed in use! Consisting of: ----------------------------------------- Pos 1: feed conveyor Pos. 2: Weinig Powermat 500 Working width 230 mm, working height 120 mm, 5 spindles + glazing bead saw: 1. below, 7.5 kW, diameter 40 mm, 8,000 rpm 2nd right, 7.5 kW, diameter 40 mm, 8,000 rpm 3rd left, 11.0 kW, diameter 40 mm, 8,000 rpm 4. above, 11.0 kW, PowerLock / HSK, 8,000 rpm 5. below, 7.5 kW, PowerLock / HSK, 8,000 rpm 6. Glass bead saw from above Pos. 3: longitudinal conveyor belt Pos. 4 and 5: Cross conveyor with transfer to Weinig Unicontrol 15 Pos. 6: Weinig Unitech 15, tenon slot unit: 1 stepless cross-cut saw with edge rounder from above 1 edge rounding unit from below 3 slotted spindles, each - 640 mm clamping length - Axial stepless adjustment with NC axis - diameter 50 mm - caster counter Pos. 7,8,9 transport system with turning device for 2nd run in Unitech 15 Pos. 10 and 11 cross conveyor and longitudinal transport in grinding machine Pos 12: Stähle-Hess single wood grinder from above and below Pos. 12 A: outfeed conveyor belt Pos 13: Conveyor system in the drilling and milling center Weinig Unirex 2000 Pos 13 A and Pos 14 Weinig Unirex 2000 Drilling and milling center with various units for the horizontal and vertical machining of the workpieces Pos. 15, 16, 17: Cross conveyors and conveyor belts to Weinig Univar 12 Pos 18: Longitudinal profiling machine Weinig Univar 12 4 profile spindles, vertical right each - 400 mm clamping length - Axial adjustment steplessly 350 mm NC axis - Radial adjustment steplessly 80 mm NC axis - diameter 50 mm 1 vertical profile milling unit on the right 3 grooving spindles working from above 1 grooved spindle working from below Pos 19 outfeed transport belt Pos 20 out feed transport system for putting off the work pieces Machine without processing tools. (techncial details according to manufacturer - without guarantee!)
            Tenoning spindle 3 St.
            Number of milling agregates 8 St.
            Spindle diameter 50 mm
            Description :
            Weinig UC-Matic window production line
            -----------------------------------------

            Weinig Powermat 500 + Weinig Unirex 2000 + Weinig Unicontrol 15

            ! Line can still be viewed in use!

            Consisting of:
            -----------------------------------------

            Pos 1: feed conveyor

            Pos. 2: Weinig Powermat 500

            Working width 230 mm, working height 120 mm,
            5 spindles + glazing bead saw:
            1. below, 7.5 kW, diameter 40 mm, 8,000 rpm
            2nd right, 7.5 kW, diameter 40 mm, 8,000 rpm
            3rd left, 11.0 kW, diameter 40 mm, 8,000 rpm
            4. above, 11.0 kW, PowerLock / HSK, 8,000 rpm
            5. below, 7.5 kW, PowerLock / HSK, 8,000 rpm
            6. Glass bead saw from above

            Pos. 3: longitudinal conveyor belt

            Pos. 4 and 5: Cross conveyor with transfer to Weinig Unicontrol 15

            Pos. 6: Weinig Unitech 15, tenon slot unit:
            1 stepless cross-cut saw with edge rounder from above
            1 edge rounding unit from below
            3 slotted spindles, each
            - 640 mm clamping length
            - Axial stepless adjustment with NC axis
            - diameter 50 mm
            - caster counter

            Pos. 7,8,9 transport system with turning device
            for 2nd run in Unitech 15

            Pos. 10 and 11 cross conveyor and longitudinal transport in grinding machine

            Pos 12: Stähle-Hess single wood grinder from above and below

            Pos. 12 A: outfeed conveyor belt

            Pos 13: Conveyor system in the drilling and milling center Weinig Unirex 2000

            Pos 13 A and Pos 14 Weinig Unirex 2000
            Drilling and milling center with various units for the
            horizontal and vertical machining of the workpieces

            Pos. 15, 16, 17: Cross conveyors and conveyor belts to Weinig Univar 12

            Pos 18: Longitudinal profiling machine Weinig Univar 12

            4 profile spindles, vertical right each
            - 400 mm clamping length
            - Axial adjustment steplessly 350 mm NC axis
            - Radial adjustment steplessly 80 mm NC axis
            - diameter 50 mm

            1 vertical profile milling unit on the right
            3 grooving spindles working from above
            1 grooved spindle working from below

            Pos 19 outfeed transport belt

            Pos 20 out feed transport system for putting off the work pieces

            Machine without processing tools.

            (techncial details according to manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6167 · Window production centre

          WEINIG - Unicontrol 6 - - -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
          Datasheet
          Request / Contact
          used Window production: wood Window production centre SCM Method K Super


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5718 · Window production centre

          SCM - Method K Super - - -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱
          SCM Method K Specifications max. Working length 2800 mm (using the attacks) min. Workpiece length 200 mm (bright tenon) min. Workpiece height 30 mm max. Workpiece height 140 mm Tenoning table speed 4.16 m / min Feed speed 3-15 m / min End cutting the first 4 kW motorized horizontal positioning via free programmable axis Speed 3000 r / min Saw blade diameter 400 mm, diameter 80 mm Dust extraction 120 mm Automatic motor brake Second belt driven pin-slot unit 7.5 kW Spindle diameter 50 mm Spindle clamping length 620 mm Spindle under table 575 mm Speed 3500 rev / min max. Tool diameter 320 mm upper bearing motorized vertical positioning via freely programmable axis automatic lock timber carrier automatic motor brake automatic star delta connection Dust extraction 2 x 160 mm 3 first profile spindle 5.5 kW right and left hand rotation (synchronous) Spindle diameter 50 mm Spindle clamping length 320 mm Spindle under table 265 mm Horizontalverstellweg 60 mm Spindle speed 6500 rev / min. Tool diameter min. / Max. 100/220 mm motorized vertical positioning via freely programmable axis Automatic motor brake Dust extraction 150 mm 4 second profile spindle 5.5 kW clockwise Spindle diameter 50 mm Spindle clamping length 320 mm Spindle under table 265 mm Horizontalverstellweg 60 mm Spindle speed 6500 rev / min. Tool diameter min. / Max. 100/220 mm motorized vertical positioning via freely programmable axis -Absaugstutzendurchmesser 150 mm -automatic engine brake 5 Getriebefräsaggregat 5.5 kW Spindle diameter 50 mm Spindle clamping length 160 mm Spindle stroke 100 mm Horizontal adjustment 60 mm Rotational speed 6500 rev / min. Tool diameter min. / Max. 100/200 mm Single stroke pneumatic control via programmable timed horizontal one control for milling insert for execution of not through grooves on CNC Dust extraction 150 mm Automatic motor brake 6 glazing beads-off saw 2.2 kW Sägewellendurchmesser 25 mm Saw blade diameter max. 220 mm Sägewellenaufspannlänge max. 22 mm Speed 5000 r / min. Extraction nozzle diameter 50 mm Automatic motor brake 7 motorized, adjustable roller feed closest roller spacing Motor power 1,1 kW CE-conformity Crosscut saw, tenoning part horizontally infinitely programmable Slot portion 620 mm spindle length, left-handed programmable vertical movement over ball screws motor PTO table movement automatically trailing Splintertree for all Slot tool positions Workholding for single / double wooden operation with automatic Pressure drop fuse precise swiveling PTO table +/- 0 - 60 ° extendable telescopic length stop with automatic Differenzmaßsteuerung, Working length 2800 mm programmable vertical movement on ball screw in position 2, 3 and 4 Horizontal positioning on manually programmable 4-position turret, operated from the front of the machine for position 3, 4 and 5 stepless roller feed, tiltable for easy tool change, with additional feed roller for Umfräsarbeiten and motorized height adjustment by scale Glazing bead cutting saw with pneumatic vertical positioning on manually adjustable 4-position turret Forced operation of the glazing bead with arrestor Use the Glashaltetrennsäge automatically controlled by cycle automatic synchronous immersion function of the first profile spindle for chip-free trimming around by sash Horizontal positioning on manually programmable 4-position turret of the To use machine front extendable support rail for large casement Getriebfräsaggregat with pneumatic horizontal positioning Use the Glasleistentrennsäge on automatic cycle of the machine program Vertical positioning to manually programmable 4-position turret CNC machine control programmable full electronics (PLC) type CONTROL 20 Motor protection switches for all motors Weight 3600 Kg optional Accessories 11 KW motor gain in Pos. 2, 3, 4 and 5 Differenzmaßprogrammierung over control automatic workpiece - Feedback Crank adjustment for angular windows electronic length stop with floppy drive Tenoning carriage extension Z - laser Ruler extension to 3900 mm pneumatic ruler option: Machine tools with IV 68/73 wood and wood-aluminum (. techn data according to manufacturer - without guarantee.!) Machine still be seen in use! Bj.98
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Description :
            SCM Method K

            Specifications
            max. Working length 2800 mm (using the attacks)
            min. Workpiece length 200 mm (bright tenon)
            min. Workpiece height 30 mm
            max. Workpiece height 140 mm
            Tenoning table speed 4.16 m / min
            Feed speed 3-15 m / min

            End cutting the first 4 kW
            motorized horizontal positioning via free programmable axis
            Speed 3000 r / min
            Saw blade diameter 400 mm, diameter 80 mm
            Dust extraction 120 mm
            Automatic motor brake

            Second belt driven pin-slot unit 7.5 kW
            Spindle diameter 50 mm
            Spindle clamping length 620 mm
            Spindle under table 575 mm
            Speed 3500 rev / min
            max. Tool diameter 320 mm
            upper bearing
            motorized vertical positioning via freely programmable axis
            automatic lock timber carrier
            automatic motor brake
            automatic star delta connection
            Dust extraction 2 x 160 mm

            3 first profile spindle 5.5 kW right and left hand rotation (synchronous)

            Spindle diameter 50 mm
            Spindle clamping length 320 mm
            Spindle under table 265 mm
            Horizontalverstellweg 60 mm
            Spindle speed 6500 rev / min.
            Tool diameter min. / Max. 100/220 mm
            motorized vertical positioning via freely programmable axis
            Automatic motor brake
            Dust extraction 150 mm

            4 second profile spindle 5.5 kW clockwise

            Spindle diameter 50 mm
            Spindle clamping length 320 mm
            Spindle under table 265 mm
            Horizontalverstellweg 60 mm
            Spindle speed 6500 rev / min.
            Tool diameter min. / Max. 100/220 mm
            motorized vertical positioning via freely programmable axis
            -Absaugstutzendurchmesser 150 mm
            -automatic engine brake

            5 Getriebefräsaggregat 5.5 kW
            Spindle diameter 50 mm
            Spindle clamping length 160 mm
            Spindle stroke 100 mm
            Horizontal adjustment 60 mm
            Rotational speed 6500 rev / min.
            Tool diameter min. / Max. 100/200 mm
            Single stroke pneumatic control via programmable
            timed horizontal one control for milling insert for execution of
            not through grooves on CNC
            Dust extraction 150 mm
            Automatic motor brake

            6 glazing beads-off saw 2.2 kW

            Sägewellendurchmesser 25 mm
            Saw blade diameter max. 220 mm
            Sägewellenaufspannlänge max. 22 mm
            Speed 5000 r / min.
            Extraction nozzle diameter 50 mm
            Automatic motor brake

            7 motorized, adjustable roller feed

            closest roller spacing
            Motor power 1,1 kW
            CE-conformity
            Crosscut saw, tenoning part horizontally
            infinitely programmable
            Slot portion 620 mm spindle length, left-handed
            programmable vertical movement over ball screws
            motor PTO table movement
            automatically trailing Splintertree for all
            Slot tool positions
            Workholding for single / double wooden operation with automatic
            Pressure drop fuse
            precise swiveling PTO table +/- 0 - 60 °
            extendable telescopic length stop with automatic Differenzmaßsteuerung,
            Working length 2800 mm
            programmable vertical movement on ball screw
            in position 2, 3 and 4
            Horizontal positioning on manually programmable
            4-position turret, operated from the front of the machine
            for position 3, 4 and 5
            stepless roller feed, tiltable for easy tool change, with
            additional feed roller for Umfräsarbeiten and motorized height adjustment
            by scale
            Glazing bead cutting saw with pneumatic vertical positioning on
            manually adjustable
            4-position turret
            Forced operation of the glazing bead with arrestor
            Use the Glashaltetrennsäge automatically
            controlled by cycle
            automatic synchronous immersion function of the first profile spindle for
            chip-free trimming around by sash
            Horizontal positioning on manually programmable 4-position turret of the
            To use machine front
            extendable support rail for large casement
            Getriebfräsaggregat with pneumatic horizontal positioning
            Use the Glasleistentrennsäge on automatic cycle of the
            machine program
            Vertical positioning to manually programmable 4-position turret
            CNC machine control programmable full
            electronics (PLC) type CONTROL 20
            Motor protection switches for all motors
            Weight 3600 Kg

            optional Accessories
            11 KW motor gain in Pos. 2, 3, 4 and 5
            Differenzmaßprogrammierung over control
            automatic workpiece - Feedback
            Crank adjustment for angular windows
            electronic length stop with floppy drive
            Tenoning carriage extension

            Z - laser

            Ruler extension to 3900 mm
            pneumatic ruler

            option:
            Machine tools with IV 68/73 wood and wood-aluminum

            (. techn data according to manufacturer - without guarantee.!)

            Machine still be seen in use! Bj.98
          Datasheet
          Request / Contact
          used Window production: wood Window production centre SCM Windor 40 R CNC


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6711 · Window production centre

          SCM - Windor 40 R CNC - - - CNC "Control 100 P.C.

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 5 St.︱Spindle diameter 50 mm︱Control CNC "Control 100 P.C.
          SCM WINDOR 40 R with 2 slot spindles + 11 kW milling unit with tool changer ------------------------------------------ Pos. 1: cross-cut saw ------------------------------------------ - Motor power 4 kW - speed 3,000 rpm - Spindle diameter 40 mm - saw blade bore 80 mm - max.tool diameter 400 mm Pos. 2: Tenoning / slotted spindle no.1 ------------------------------------------ - High-performance spindle with top bearing - 620 mm length, diameter 50 mm - Motor power 11 kW - speed 3,000 rpm - Max. Tool diameter 370 mm - Axis run under work table 575 mm - Jolly automatic anti-splinter device - Vertical positioning via freely programmable axis control Pos. 3: Power 2000: Electro spindle with HSK 63F tool holder ------------------------------------------ for all drilling and milling for windows and doors - min / max. Rotation speed 1000-12000 rpm by static inverter - max.motor power 15 HP (11 kW) from 11000 up to 18000 rpm - water cooling - quick vertical adjustment via brushless motors - Vector rotation axis for electrospindle rotation to 360 ° - RAPID 24 autom. Tool changer - max. 230 mm - 24 tool places - 10 kg. max.weight per tool - 100 kg. max.weight on the tool magazine Pos. 4: Tenoning / slotted spindle no.2 ------------------------------------------ - High-performance spindle with top bearing - 620 mm length, diameter 50 mm - Motor power 11 kW - speed 3,000 rpm - Max. Tool diameter 370 mm - Axis run under work table 575 mm - Jolly automatic anti-splinter device - Vertical positioning via freely programmable axis control Pos. 5: Profiling spindle no.1 ------------------------------------------ - 320 mm length, diameter 50 mm - Motor power 7.5 kW - speed 6,000 rpm - min./max. Tool diameter 130-240 mm - Axis run under work table 280 mm - Vertical positioning via freely programmable axis control - Horizontal positioning via freely programmable axis control - Right / left rotation - Synchronous immersion function Pos. 6: Profiling spindle no.2 ------------------------------------------ - 320 mm length, diameter 50 mm - Motor power 7.5 kW - speed 6,000 rpm - min./max. Tool diameter 130-240 mm - Axis run under work table 280 mm - Vertical positioning via freely programmable axis control - Horizontal positioning via freely programmable axis control Pos. 7: Profiling spindle no.3 ------------------------------------------ - 320 mm length, diameter 50 mm - Motor power 7.5 kW - speed 6,000 rpm - min./max. Tool diameter 130-240 mm - Axis run under work table 280 mm - Vertical positioning via freely programmable axis control - Horizontal positioning via freely programmable axis control Pos. 8 above: Working unit for separating the glazing beads ------------------------------------------ - spindle diameter 30 mm; Length 30 mm - max.tool width 22 mm - Motor power 3 kW - speed 6000 rpm - Saw blade diameter 220 mm - Glazing bead holding device and guide - Vertical positioning via freely programmable axis control - Horizontal positioning via freely programmable axis control Other features: Interpolating rotations for two tenon units ------------------------------------------ Device to autom. Manufacture of tenons with an inclination of +/- 60 ° - Motor power on both trunnion units 11 kW each - Max. Tool diameter on both tenon units 370 mm - Software and hardware changes Rebate trolley for narrow leaves Workpiece return Control "CONTROL 100 PC" ------------------------------------------ CONTROL 100 PC is a control unit structured on two levels. The first Level consists of the numerical machine control (PLC) that is responsible for the Functions to control the machine is responsible. The second level consists from a personal computer that communicates with the PLC and the human Represents machine interface. The personal computer also offers the Possibility to connect any external units for data processing. The monitoring program NEXT, specially developed by SCM, is installed on the PC for the complete management of the machines and programmable systems with controlled positioning axes was developed. With this system it is possible to keep the processing data always resident in the memory and through simply typing the appropriate name on the keyboard. Each The machining program takes care of the positioning of the relevant units, which are equipped with controlled axes. Saving, deleting or Editing of the work programs can be done conveniently via the keyboard as well as the correction of the tool position. Via a network card (on request) is the connection with external units (management systems or other PCs) to receive or transmit processing data (the software required for data exchange is not included in the Standard scope of delivery of the control included). The machine is standard equipped with a remote maintenance program (Telesolve), which can be accessed via a PC Integrated modem troubleshooting via an with the SCM customer service center connected ISDN telephone line enables. CONTROL UNIT FOR MULTIPLE AXES Hardware characteristics of the personal computer: - PC PENTIUM 400 MHz - 128 KB cache - 64 MB RAM - Floppy disk drive, capacity 1.44 Mbytes - CD-ROM 32x - Color screen with 15 "CRT SVGA-AGP - 4.3 GB hard drive - mouse - 2 serial interfaces 232, USB, PS2 - parallel interface TECHNICAL SPECIFICATIONS ------------------------------------------ Min. Workpiece length (clear tenon dimension): 200 mm Max. Workpiece length (in relation to the stops): 3,200 mm Min. Workpiece width: 40 mm Max. Workpiece width: 200 mm Min. Workpiece height: 30 mm Max. Workpiece height: 130 mm Option: used tools (technical information according to the manufacturer - without guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 5 St.
            Spindle diameter 50 mm
            Control CNC "Control 100 P.C.
            Description :
            SCM WINDOR 40 R with 2 slot spindles + 11 kW milling unit with tool changer
            ------------------------------------------

            Pos. 1: cross-cut saw
            ------------------------------------------
            - Motor power 4 kW
            - speed 3,000 rpm
            - Spindle diameter 40 mm
            - saw blade bore 80 mm
            - max.tool diameter 400 mm

            Pos. 2: Tenoning / slotted spindle no.1
            ------------------------------------------
            - High-performance spindle with top bearing
            - 620 mm length, diameter 50 mm
            - Motor power 11 kW
            - speed 3,000 rpm
            - Max. Tool diameter 370 mm
            - Axis run under work table 575 mm
            - Jolly automatic anti-splinter device
            - Vertical positioning via freely programmable axis control

            Pos. 3: Power 2000: Electro spindle with HSK 63F tool holder
            ------------------------------------------
            for all drilling and milling for windows and doors

            - min / max. Rotation speed 1000-12000 rpm by static inverter
            - max.motor power 15 HP (11 kW) from 11000 up to 18000 rpm
            - water cooling
            - quick vertical adjustment via brushless motors
            - Vector rotation axis for electrospindle rotation to 360 °
            - RAPID 24 autom. Tool changer
            - max. 230 mm
            - 24 tool places
            - 10 kg. max.weight per tool
            - 100 kg. max.weight on the tool magazine

            Pos. 4: Tenoning / slotted spindle no.2
            ------------------------------------------
            - High-performance spindle with top bearing
            - 620 mm length, diameter 50 mm
            - Motor power 11 kW
            - speed 3,000 rpm
            - Max. Tool diameter 370 mm
            - Axis run under work table 575 mm
            - Jolly automatic anti-splinter device
            - Vertical positioning via freely programmable axis control

            Pos. 5: Profiling spindle no.1
            ------------------------------------------
            - 320 mm length, diameter 50 mm
            - Motor power 7.5 kW
            - speed 6,000 rpm
            - min./max. Tool diameter 130-240 mm
            - Axis run under work table 280 mm
            - Vertical positioning via freely programmable axis control
            - Horizontal positioning via freely programmable axis control
            - Right / left rotation
            - Synchronous immersion function

            Pos. 6: Profiling spindle no.2
            ------------------------------------------
            - 320 mm length, diameter 50 mm
            - Motor power 7.5 kW
            - speed 6,000 rpm
            - min./max. Tool diameter 130-240 mm
            - Axis run under work table 280 mm
            - Vertical positioning via freely programmable axis control
            - Horizontal positioning via freely programmable axis control

            Pos. 7: Profiling spindle no.3
            ------------------------------------------
            - 320 mm length, diameter 50 mm
            - Motor power 7.5 kW
            - speed 6,000 rpm
            - min./max. Tool diameter 130-240 mm
            - Axis run under work table 280 mm
            - Vertical positioning via freely programmable axis control
            - Horizontal positioning via freely programmable axis control

            Pos. 8 above: Working unit for separating the glazing beads
            ------------------------------------------
            - spindle diameter 30 mm; Length 30 mm
            - max.tool width 22 mm
            - Motor power 3 kW
            - speed 6000 rpm
            - Saw blade diameter 220 mm
            - Glazing bead holding device and guide
            - Vertical positioning via freely programmable axis control
            - Horizontal positioning via freely programmable axis control

            Other features:

            Interpolating rotations for two tenon units
            ------------------------------------------
            Device to autom. Manufacture of tenons with an inclination of +/- 60 °
            - Motor power on both trunnion units 11 kW each
            - Max. Tool diameter on both tenon units 370 mm
            - Software and hardware changes

            Rebate trolley for narrow leaves

            Workpiece return

            Control "CONTROL 100 PC"
            ------------------------------------------
            CONTROL 100 PC is a control unit structured on two levels. The first
            Level consists of the numerical machine control (PLC) that is responsible for
            the
            Functions to control the machine is responsible. The second level consists
            from a personal computer that communicates with the PLC and the human
            Represents machine interface. The personal computer also offers the
            Possibility to connect any external units for data processing.
            The monitoring program NEXT, specially developed by SCM, is installed on the PC
            for the complete management of the machines and programmable systems with
            controlled positioning axes was developed. With this system it is
            possible to keep the processing data always resident in the memory and through
            simply typing the appropriate name on the keyboard. Each
            The machining program takes care of the positioning of the relevant units,
            which are equipped with controlled axes. Saving, deleting or
            Editing of the work programs can be done conveniently via the keyboard
            as well as the correction of the tool position. Via a network card
            (on request) is the connection with external units (management systems
            or other PCs) to receive or transmit processing data
            (the software required for data exchange is not included in the
            Standard scope of delivery of the control included). The machine is standard
            equipped with a remote maintenance program (Telesolve), which can be accessed
            via a PC
            Integrated modem troubleshooting via an with the SCM customer service center
            connected ISDN telephone line enables.


            CONTROL UNIT FOR MULTIPLE AXES

            Hardware characteristics of the personal computer:
            - PC PENTIUM 400 MHz
            - 128 KB cache
            - 64 MB RAM
            - Floppy disk drive, capacity 1.44 Mbytes
            - CD-ROM 32x
            - Color screen with 15 "CRT SVGA-AGP
            - 4.3 GB hard drive
            - mouse
            - 2 serial interfaces 232, USB, PS2
            - parallel interface

            TECHNICAL SPECIFICATIONS
            ------------------------------------------

            Min. Workpiece length (clear tenon dimension): 200 mm
            Max. Workpiece length (in relation to the stops): 3,200 mm
            Min. Workpiece width: 40 mm
            Max. Workpiece width: 200 mm
            Min. Workpiece height: 30 mm
            Max. Workpiece height: 130 mm

            Option: used tools

            (technical information according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          WEINIG - SCM - GUBISCH - HABERKORN -