Европейская сеть дилеров складской техники

Категория:
    Производитель:
      Машины:
        Трейдер:

          Knops Werkzeugmaschinen GmbH & Co. KG - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe WOHLENBERG V 1000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08501 · Center Lathe

          WOHLENBERG - V 1000 - - 1991 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 760 mm︱turning length 3000 mm︱spindle turning speed range 4,5 - 900 U/min︱spindle bore 104 mm︱total power requirement 30 kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. m︱
          - 3-axis D.R.O. - Feed in the upper slide - Multifix quick change tool holder size D with 2 holders - coolant device - steady-rest The lathe chuck (face plate) shown has been replaced by an older one.
            turning diameter over bed 1000 mm
            turning diameter over slide rest 760 mm
            turning length 3000 mm
            spindle turning speed range 4,5 - 900 U/min
            spindle bore 104 mm
            total power requirement 30 kW
            weight of the machine ca. 10,5 t
            Description :
            - 3-axis D.R.O.
            - Feed in the upper slide
            - Multifix quick change tool holder size D with 2 holders
            - coolant device
            - steady-rest

            The lathe chuck (face plate) shown has been replaced by an older one.
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe WOHLENBERG PT1-II 1070


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2140 · CNC Lathe

          WOHLENBERG - PT1-II 1070 - - 2001/2020 - R&D MTC 2/3

          Technical details
          turning diameter 1070 mm︱turning length 3000 mm︱control R&D MTC 2/3 ︱swing diameter over slide rest 710 mm︱centre distance 3000 mm︱main spindle bore 128 mm︱spindle turning speed range 1,4 - 450 U/min︱transmission ratio 2 ︱x-axis 800 mm︱bed width 710 mm︱feed - longitudinal/cross 0,75 - 6000 mm/min︱max. workpiece weight -without tailstock 2500 kg︱max. workpiece weight between centres 8000 kg︱workpiece weight in steadies max. 10000 kg︱tailstock quill diameter 200 mm︱tailstock quill stroke 350 mm︱main drive motor 55 kW︱dimensions of machine 7,3 x 2,7 x 2,4 m︱weight of the machine ca. 23 t︱
          * CNC-control R&D MTC 2/3 * Autom. 4-station turret SAUTER * Faceplate, diameter 1000 mm * Steady-rest In February/March 2020 the X-axis was completely overhauled (costs 27.392,13 Euro)
            turning diameter 1070 mm
            turning length 3000 mm
            control R&D MTC 2/3
            swing diameter over slide rest 710 mm
            centre distance 3000 mm
            main spindle bore 128 mm
            spindle turning speed range 1,4 - 450 U/min
            transmission ratio 2
            x-axis 800 mm
            bed width 710 mm
            feed - longitudinal/cross 0,75 - 6000 mm/min
            max. workpiece weight -without t. 2500 kg
            max. workpiece weight between ce. 8000 kg
            workpiece weight in steadies max. 10000 kg
            tailstock quill diameter 200 mm
            tailstock quill stroke 350 mm
            main drive motor 55 kW
            dimensions of machine 7,3 x 2,7 x 2,4 m
            weight of the machine ca. 23 t
            Description :
            * CNC-control R&D MTC 2/3
            * Autom. 4-station turret SAUTER
            * Faceplate, diameter 1000 mm
            * Steady-rest

            In February/March 2020 the X-axis was completely overhauled (costs 27.392,13
            Euro)
          Datasheet
          Request / Contact
          used  CNC Lathe HEYLIGENSTAEDT NDc-710/II/5x1500


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05927 · CNC Lathe

          HEYLIGENSTAEDT - NDc-710/II/5x1500 - - 1975/2015 retrofit - R+D MTC 4

          Technical details
          swing over bed 1400 mm︱centre distance 1500 mm︱control R+D MTC 4 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          2010 The machine was general reconditioning. 2015 The machine received a new CNC control from R&D MTC 4. CNC control R + D MTC 4 Max. swing diameter over bed 1400 mm Max. swing diameter over bed slide 1120 mm Max. distance between centers 1500 mm Max. workpiece weight between the centers 5000 kg Faceplate diameter 1300 mm Main motor power 40 kW Main spindle speeds 1.8 to 355 rpm Number of gear stages 4 Space requirement approx. 7000 x 6000 x 2500 mm Machine weight approx. 17.2 t Machine including the following accessories: 10 Sauter tool holders 1 piece boring bar holder for boring bars Ø 120 mm 2 centering cones for tailstock The lathe is in good condition and is up-to-date Integrated into production in two shifts. The annual maintenance costs are around 3,000.00 euros. As usual with used machines, sales are made without warranty. Dismantling, loading and removal from the location by the buyer. You are welcome to visit the machine here on site.
            swing over bed 1400 mm
            centre distance 1500 mm
            control R+D MTC 4
            Description :
            2010 The machine was general reconditioning.
            2015 The machine received a new CNC control from R&D MTC 4.

            CNC control R + D MTC 4
            Max. swing diameter over bed 1400 mm
            Max. swing diameter over bed slide 1120 mm
            Max. distance between centers 1500 mm
            Max. workpiece weight between the centers 5000 kg
            Faceplate diameter 1300 mm
            Main motor power 40 kW
            Main spindle speeds 1.8 to 355 rpm
            Number of gear stages 4
            Space requirement approx. 7000 x 6000 x 2500 mm
            Machine weight approx. 17.2 t

            Machine including the following accessories:
            10 Sauter tool holders
            1 piece boring bar holder for boring bars Ø 120 mm
            2 centering cones for tailstock

            The lathe is in good condition and is up-to-date
            Integrated into production in two shifts.
            The annual maintenance costs are around 3,000.00 euros.

            As usual with used machines, sales are made without warranty.
            Dismantling, loading and removal from the location by the buyer.

            You are welcome to visit the machine here on site.
          Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used  CNC Lathe - Inclined Bed Type GILDEMEISTER CTX 600


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2190 · CNC Lathe - Inclined Bed Type

          GILDEMEISTER - CTX 600 - - 1996 - EP 90 DIN-PLUS

          Technical details
          turning diameter 650 mm︱turning length 1000 mm︱control EP 90 DIN-PLUS ︱swing over bed 650 mm︱swing diameter over slide rest 480 mm︱cross movement 320 mm︱longitudinal travel 1097 mm︱spindle bore 107 mm︱spindle turning speed range 4 - 3050 U/min︱transmission ratio 2 ︱rapid travel - longitudinal/face 15/10 m/min︱tailstock quill diameter 120 mm︱tailstock quill stroke 120 mm︱tailstock taper MT 5 ︱main drive motor 27 kW︱milling drive 10,4 kW︱weight of the machine ca. 8,0 t︱dimensions of the machine ca. 5,1 x 3,4 x 1,9 m︱
          - CNC control Grundig (Heidenhain) EP 90, DIN-PLUS - 3-jaw power-chuck, 315 mm diameter - hydr. steady-rest, range approx. 35-240 mm - 12-station turret (incl. 6 driven stations) - C-axis - 2 x driven toolholders axial - 1 x driven toolholder radial - approx. 30 toolholders (external + internal)
            turning diameter 650 mm
            turning length 1000 mm
            control EP 90 DIN-PLUS
            swing over bed 650 mm
            swing diameter over slide rest 480 mm
            cross movement 320 mm
            longitudinal travel 1097 mm
            spindle bore 107 mm
            spindle turning speed range 4 - 3050 U/min
            transmission ratio 2
            rapid travel - longitudinal/face 15/10 m/min
            tailstock quill diameter 120 mm
            tailstock quill stroke 120 mm
            tailstock taper MT 5
            main drive motor 27 kW
            milling drive 10,4 kW
            weight of the machine ca. 8,0 t
            dimensions of the machine ca. 5,1 x 3,4 x 1,9 m
            Description :
            - CNC control Grundig (Heidenhain) EP 90, DIN-PLUS
            - 3-jaw power-chuck, 315 mm diameter
            - hydr. steady-rest, range approx. 35-240 mm
            - 12-station turret (incl. 6 driven stations)
            - C-axis
            - 2 x driven toolholders axial
            - 1 x driven toolholder radial
            - approx. 30 toolholders (external + internal)
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center NILES-SIMMONS N 50 MC / 6000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08714 · CNC Turning- and Milling Center

          NILES-SIMMONS - N 50 MC / 6000 - - 2009 - Siemens 840D Power Line

          Technical details
          turning diameter 1300 mm︱turning length 6000 mm︱control Siemens 840D Power Line ︱total power requirement kW︱weight of the machine ca. 82 t︱dimensions of the machine ca. 17,6 x 3,7 x 3,9 m︱
          5-axis CNC inclined bed turning and milling center The machine is PRACTICAL NEW! - Test run only! Main spindle hours: 1047 Main spindle C axis: 228 Advance items active: 968 Milling spindle active: 460 (New price in 2009 - Euro 1,700,000.00) Siemens 840D CNC Control. Swing diameter over the bed 1300 mm. Swing diameter over the saddle 1250 mm. Turning length 6000 mm. Spindle bore 225 mm. Chuck diameter 630 mm. Spindle drive motor rating 78/87 KW. Spindle speeds 10 - 1244 rpm in 2 gear steps. C-Axis 0.001 deg. Single tool carrier for Turning/Milling. 96 station tool magazine/tool changer. Tool taper HSK-A100. Milling spindle drive motor rating 38/48.3 KW. Milling spindle speeds to 3500 rpm. Y-Axis (off centre milling/drilling) -400/+395 mm. B-Axis tool swivelling axis range -105/+95 deg.. 3 x NC-steady slides with steady rests. NC-Tailstock. Tool monitoring. Coolant pump 80 bar. Process near measuring of the workpiece in the working area. Huge amount ( EUR 176,695.) of toolings unused, included
            turning diameter 1300 mm
            turning length 6000 mm
            control Siemens 840D Power Line
            weight of the machine ca. 82 t
            dimensions of the machine ca. 17,6 x 3,7 x 3,9 m
            Description :
            5-axis CNC inclined bed turning and milling center
            The machine is PRACTICAL NEW! - Test run only!

            Main spindle hours: 1047
            Main spindle C axis: 228
            Advance items active: 968
            Milling spindle active: 460

            (New price in 2009 - Euro 1,700,000.00)




            Siemens 840D CNC Control.
            Swing diameter over the bed 1300 mm.
            Swing diameter over the saddle 1250 mm.
            Turning length 6000 mm.
            Spindle bore 225 mm.
            Chuck diameter 630 mm.
            Spindle drive motor rating 78/87 KW.
            Spindle speeds 10 - 1244 rpm in 2 gear steps.
            C-Axis 0.001 deg.
            Single tool carrier for Turning/Milling.
            96 station tool magazine/tool changer.
            Tool taper HSK-A100.
            Milling spindle drive motor rating 38/48.3 KW.
            Milling spindle speeds to 3500 rpm.
            Y-Axis (off centre milling/drilling) -400/+395 mm.
            B-Axis tool swivelling axis range -105/+95 deg..
            3 x NC-steady slides with steady rests.
            NC-Tailstock.
            Tool monitoring.
            Coolant pump 80 bar.
            Process near measuring of the workpiece in the working area.
            Huge amount ( EUR 176,695.) of toolings unused, included
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center EMCO EMCOTURN 900


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08525 · CNC Turning- and Milling Center

          EMCO - EMCOTURN 900 - - 2006 - Siemens 840 D

          Technical details
          turning diameter 1000 mm︱turning length 2000 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Siemens 840 D Driven tools C-axis Tailstock Hydraulic jaw chuck Chip conveyor Coolant device Machine is sold without tools / holders
            turning diameter 1000 mm
            turning length 2000 mm
            control Siemens 840 D
            Description :
            CNC control Siemens 840 D
            Driven tools
            C-axis
            Tailstock
            Hydraulic jaw chuck
            Chip conveyor
            Coolant device

            Machine is sold without tools / holders
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center TRAUB TNK 36


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05810 · CNC Turning- and Milling Center

          TRAUB - TNK 36 - - 2002 - TRAUB TX8i

          Technical details
          turning diameter 36 mm︱turning length 100 mm︱control TRAUB TX8i ︱bar capacity 36 mm︱spindle turning speed range max. 6300 U/min︱main drive motor 10,7 kW︱Subspindle motor 10,7 kW︱total power requirement 33 kW︱weight of the machine ca. t︱
          * Main- and subspindle with C-axis 0,001 deg. * Bar loader FMB turbo 5-42 XT * Tool carrier I (X/Y/Z): - 12-station turret, life tools 6000 rpm, 5,5 kW - Travels: X-axis 50 mm, Y-axis +/- 40mm, Z-axis 100 mm * Tool carrier II (X/Z): - 5-station front working attachment, life tools 6000 rpm, 5,5 kW - Travels: X-axis 370 mm, Z-axis 250 mm * Tool carrier III (X/Y): - 5-station back working attachment, life tools 6000 rpm, 5,5 kW - Travels: X-axis 73 mm, Y-axis +/-50 mm Information about the chucks: Main spindle: Chuck clamping top pull-back Gr32 SK6970ZW Counter spindle: Chuck clamping top Axfix Gr32 f SK6970ZW Collets: SK6970ZW or SK6970ZW
            turning diameter 36 mm
            turning length 100 mm
            control TRAUB TX8i
            bar capacity 36 mm
            spindle turning speed range max. 6300 U/min
            main drive motor 10,7 kW
            Subspindle motor 10,7 kW
            total power requirement 33 kW
            Description :
            * Main- and subspindle with C-axis 0,001 deg.
            * Bar loader FMB turbo 5-42 XT
            * Tool carrier I (X/Y/Z):
            - 12-station turret, life tools 6000 rpm, 5,5 kW
            - Travels: X-axis 50 mm, Y-axis +/- 40mm, Z-axis 100 mm
            * Tool carrier II (X/Z):
            - 5-station front working attachment, life tools 6000 rpm, 5,5 kW
            - Travels: X-axis 370 mm, Z-axis 250 mm
            * Tool carrier III (X/Y):
            - 5-station back working attachment, life tools 6000 rpm, 5,5 kW
            - Travels: X-axis 73 mm, Y-axis +/-50 mm

            Information about the chucks:
            Main spindle: Chuck clamping top pull-back Gr32 SK6970ZW
            Counter spindle: Chuck clamping top Axfix Gr32 f SK6970ZW
            Collets: SK6970ZW or SK6970ZW

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK Integrex 200 SY + GL100C


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08710 · CNC Turning- and Milling Center

          MAZAK - Integrex 200 SY + GL100C - - 2001 - MAZATROL 640 MT

          Technical details
          turning diameter 540 mm︱turning length ca. 1065 mm︱control MAZATROL 640 MT ︱total power requirement kW︱weight of the machine ca. 8,4 t︱dimensions of the machine ca. m︱
          MAZATROL 640 MT control max. turning diameter 540 mm Z-axis movements 1.065 mm Main spindle, max. speed 5.000 rpm Main spindle full C-axis Sub spindle, max. speed 6.000 rpm Y-axis +/- 80 mm Milling spindle, max. speed 6.000 rpm Full B-axis, 225° ATC 40 tools KM-63 toolholders Tooleye 1 x 3-Backenfutter, Diameter 210 mm 1 x 3-Backenfutter, Diameter 170 mm Portallader Flex GL-100C High pressure coolant, 20 bar Swarf conveyor
            turning diameter 540 mm
            turning length ca. 1065 mm
            control MAZATROL 640 MT
            weight of the machine ca. 8,4 t
            Description :
            MAZATROL 640 MT control
            max. turning diameter 540 mm
            Z-axis movements 1.065 mm
            Main spindle, max. speed 5.000 rpm
            Main spindle full C-axis
            Sub spindle, max. speed 6.000 rpm
            Y-axis +/- 80 mm
            Milling spindle, max. speed 6.000 rpm
            Full B-axis, 225°
            ATC 40 tools
            KM-63 toolholders
            Tooleye
            1 x 3-Backenfutter, Diameter 210 mm
            1 x 3-Backenfutter, Diameter 170 mm
            Portallader Flex GL-100C
            High pressure coolant, 20 bar
            Swarf conveyor
          Datasheet
          Request / Contact

          Facing and Centering Lathe

          used  Facing and Centering Lathe WMW ZERBST DP 4000 ... DP 5000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05430 · Facing and Centering Lathe

          WMW ZERBST - DP 4000 ... DP 5000 - - retrofit 2014 -

          Technical details
          turning diameter over bed 5000 mm︱turning diameter over slide rest 4000 mm︱turning length 22000 mm︱total power requirement 36 kW︱weight of the machine ca. 53,5 t︱dimensions of the machine ca. m︱
          Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After the overhaul, the lathe was no longer operational. Machine is dismantled and stored near Hamburg.
            turning diameter over bed 5000 mm
            turning diameter over slide rest 4000 mm
            turning length 22000 mm
            total power requirement 36 kW
            weight of the machine ca. 53,5 t
            Description :
            Facing and Centering Lathe with plate field

            - Max. Turning diameter over the bed slide 4000 mm
            - Max. Turning diameter 5000 mm
            - Max. Turning length: 22000 mm
            - Face plate speed range 0.9 - 56 rpm
            - Faceplate diameter 4420 mm
            - Max. Workpiece weight between the centers: 20 t
            - Max. workpiece weight -without tailstock: 12,5 t

            - Two bed slides with 4500 mm turning length
            - With plate fields
            - A roller block
            - With tailstock

            Machine was overhauled in Italy in 2014 with stepless speed control.
            After the overhaul, the lathe was no longer operational.

            Machine is dismantled and stored near Hamburg.
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe CRAVEN 80,5


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H05287 · Heavy Duty Lathe

          CRAVEN - 80,5 - - ca.1960 -

          Technical details
          turning diameter over bed 4100 mm︱turning diameter over slide rest 3505 mm︱turning length 12000 mm︱centre height 2045 mm︱centre distance 12192 mm︱bed width 4270 mm︱max. workpiece weight between centres 70000 kg︱main drive 81 kW︱faceplate turning speed range 0,3- 48,6 (4 Stufen) U/min︱total power requirement kW︱weight of the machine ca. 205 t︱dimensions of the machine ca. m︱
          4 SLIDES BED LATHE CENTRES HEIGHT 2.045 MM. CENTRES DISTANCE 12.192 MM. MAX. DIAMETER OVER BED 4.100 MM. MAX. DIAMETER OVER SADDLE 3.505 MM. BED WIDTH 4.270 MM. MAX. WEIGHT BETWEEN CENTRES 70 TONS. MAX. WEIGHT BETWEEN CENTRES (with n. 1 steady) 80 TONS. SPINDLE MOTOR POWER 81 KW. SPINDLE SPEEDS - n. 4 ranges 0,3 ÷ 48,6 RPM. SPINDLE HOLE 180 MM. TOTAL WEIGHT 205 COMPLETE WITH: - 4 JAWS FACEPLATE 3.660 MM. - N. 2 CLOSED STEADIES, DIAMETER 305 - 1.016 MM. - N. 2 SPECIAL SUPPORTS FOR CRANK SHAFTS - UPPER SADDLE FOR THREADING - CRANK SHAFTS TURNING DEVICE
            turning diameter over bed 4100 mm
            turning diameter over slide rest 3505 mm
            turning length 12000 mm
            centre height 2045 mm
            centre distance 12192 mm
            bed width 4270 mm
            max. workpiece weight between ce. 70000 kg
            main drive 81 kW
            faceplate turning speed range 0,3- 48,6 (4 Stufen) U/min
            weight of the machine ca. 205 t
            Description :
            4 SLIDES BED LATHE

            CENTRES HEIGHT 2.045 MM.

            CENTRES DISTANCE 12.192 MM.

            MAX. DIAMETER OVER BED 4.100 MM.

            MAX. DIAMETER OVER SADDLE 3.505 MM.

            BED WIDTH 4.270 MM.

            MAX. WEIGHT BETWEEN CENTRES 70 TONS.

            MAX. WEIGHT BETWEEN CENTRES (with n. 1 steady) 80 TONS.

            SPINDLE MOTOR POWER 81 KW.

            SPINDLE SPEEDS - n. 4 ranges 0,3 ÷ 48,6 RPM.

            SPINDLE HOLE 180 MM.

            TOTAL WEIGHT 205


            COMPLETE WITH:
            - 4 JAWS FACEPLATE 3.660 MM.
            - N. 2 CLOSED STEADIES, DIAMETER 305 - 1.016 MM.
            - N. 2 SPECIAL SUPPORTS FOR CRANK SHAFTS
            - UPPER SADDLE FOR THREADING
            - CRANK SHAFTS TURNING DEVICE
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe FRORIEP 4000 x 13000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H07408 · Heavy Duty Lathe

          FRORIEP - 4000 x 13000 - - approx. 1970 -

          Technical details
          turning diameter over bed 4000 mm︱turning diameter over slide rest 2220 mm︱turning length 13000 mm︱faceplate diameter 2540 mm︱max. workpiece weight between centres 100 ton︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Heavy Duty Lathe with steady-rests in excellent condition. Nr. 4 guides Diameter face plate mm 2.540 Working diameter mm 4.000 x 6.500 Working diameter mm 2.220 x 13.000 Inspection under power possible.
            turning diameter over bed 4000 mm
            turning diameter over slide rest 2220 mm
            turning length 13000 mm
            faceplate diameter 2540 mm
            max. workpiece weight between ce. 100 ton
            Description :
            Heavy Duty Lathe with steady-rests in excellent condition.

            Nr. 4 guides
            Diameter face plate mm 2.540
            Working diameter mm 4.000 x 6.500
            Working diameter mm 2.220 x 13.000


            Inspection under power possible.
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe QIQIHAR HT125x110/12


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08290 · Heavy Duty Lathe

          QIQIHAR - HT125x110/12 - - 2009 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide rest 1000 mm︱turning length 11000 mm︱total power requirement kW︱weight of the machine ca. 49 t︱dimensions of the machine ca. m︱
          Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual
            turning diameter over bed 1250 mm
            turning diameter over slide rest 1000 mm
            turning length 11000 mm
            weight of the machine ca. 49 t
            Description :
            Center height 720 mm
            Center distance 11000 mm
            Turning diameter over bed 1250 mm
            Turning diameter over slide 1000 mm
            Workpiece weight max 12 to
            Speed 3-315 rpm - stepless
            Motor power 55 kW (DC)

            Equipment
            1 position indicator HEIDENHAIN | Type ND 780 for 1 axis
            1 four-jaw faceplate Ø 1000 mm
            1 fixed steady rest
            1 ring steady rest with four-jaw faceplate Ø 920 mm
            1 Autom. 4-pos. tool holder
            1 Chip conveyor
            1 Machine lamp
            1 Coolant device
            Operating key | operating manual
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe SAFOP LEONARD 70/2500 CNC


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08668 · Heavy Duty Lathe

          SAFOP LEONARD - 70/2500 CNC - - 2004 -

          Technical details
          turning diameter over bed 2500 mm︱turning diameter over slide rest - mm︱turning length 12500 mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC lathe equipped with: Siemens 840D control Ejector type drilling system C-axis headstock with 1500mm dia chuck Milling unit Angular head 2 steady rests hydrostatic type Tooling Documentation The machine is in excellent condition. It has been very little used since new as it is in a maintanence facility and not used in full production. It was used for turbine rotors in power industry.
            turning diameter over bed 2500 mm
            turning diameter over slide rest - mm
            turning length 12500 mm
            Description :
            CNC lathe equipped with:
            Siemens 840D control
            Ejector type drilling system
            C-axis headstock with 1500mm dia chuck
            Milling unit
            Angular head
            2 steady rests hydrostatic type
            Tooling
            Documentation

            The machine is in excellent condition.

            It has been very little used since new as it is in a maintanence facility and
            not used in full production. It was used for turbine rotors in power industry.

          Datasheet
          Request / Contact
          used  Heavy Duty Lathe SKODA SIU 126


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08586 · Heavy Duty Lathe

          SKODA - SIU 126 - - 1967/retrofit 2000 - Heidenhain Manual Plus

          Technical details
          turning diameter over bed 1260 mm︱turning diameter over slide rest 1000 mm︱turning length 7000 mm︱Control Heidenhain Manual Plus ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Completely overhauled 1999-2000 Control: Heidenhain Manual Plus CNC Swing diameter over the bed: 1260 mm Swing diameter over the cross slides: 1000 mm Turning length: max. 7000 mm Bed length: 8500 mm Centre height: 630 mm Work piece weight between centres: max. 20000 kg Work piece weight between centres with steadies: max. 30000 kg Feeds: X 0 - 1440 mm/min. Z 0 - 3600 mm/min. Spindle drive motor rating: 56 KW Spindle speeds: 0.56 - 280 rpm Chuck diameter: 1260 mm Chuck type: faceplate Diameter in steadies: 150 / 630 mm Tool bite size: 70 mm Equipped with: Taper turning; Thread cutting; Coolant unit; Boring bar holder; Chip conveyor
            turning diameter over bed 1260 mm
            turning diameter over slide rest 1000 mm
            turning length 7000 mm
            Control Heidenhain Manual Plus
            Description :
            Completely overhauled 1999-2000

            Control: Heidenhain Manual Plus CNC

            Swing diameter over the bed: 1260 mm
            Swing diameter over the cross slides: 1000 mm
            Turning length: max. 7000 mm
            Bed length: 8500 mm
            Centre height: 630 mm
            Work piece weight between centres: max. 20000 kg
            Work piece weight between centres with steadies: max. 30000 kg

            Feeds: X 0 - 1440 mm/min.
            Z 0 - 3600 mm/min.

            Spindle drive motor rating: 56 KW
            Spindle speeds: 0.56 - 280 rpm
            Chuck diameter: 1260 mm
            Chuck type: faceplate

            Diameter in steadies: 150 / 630 mm
            Tool bite size: 70 mm

            Equipped with:
            Taper turning;
            Thread cutting;
            Coolant unit;
            Boring bar holder;
            Chip conveyor
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled PBR T 35 SNC x 2000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05972 · Lathe - cycle-controlled

          PBR - T 35 SNC x 2000 - - 2007 - FAGOR

          Technical details
          turning diameter 720 mm︱turning length 2000 mm︱control FAGOR ︱turning diameter over slide 425 mm︱spindle bore 100 mm︱dimensions 6,0 x 2,1 x 2,1 m︱total power requirement kW︱weight of the machine ca. t︱
          •Control von Fagor •Power 28 Kw •Turning diameter over bed 720 mm •Turning diameter over saddle 425 mm •Turning length 2.000 mm •Max speed 2.000 rpm. •Power chuck Ø400 •Steady-rest Ø20-200 mm •Max. workpiece weight between centers + steady-rest 4.000 KG •Max. workpiece weight between centers 3.000 KG •Max. workpiece weight in chuck 1.200 KG
            turning diameter 720 mm
            turning length 2000 mm
            control FAGOR
            turning diameter over slide 425 mm
            spindle bore 100 mm
            dimensions 6,0 x 2,1 x 2,1 m
            Description :
            •Control von Fagor
            •Power 28 Kw
            •Turning diameter over bed 720 mm
            •Turning diameter over saddle 425 mm
            •Turning length 2.000 mm
            •Max speed 2.000 rpm.
            •Power chuck Ø400
            •Steady-rest Ø20-200 mm
            •Max. workpiece weight between centers + steady-rest 4.000 KG
            •Max. workpiece weight between centers 3.000 KG
            •Max. workpiece weight in chuck 1.200 KG
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled PBR T 450 SNC x 3500


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05973 · Lathe - cycle-controlled

          PBR - T 450 SNC x 3500 - - 2007 - FAGOR

          Technical details
          turning diameter 920 mm︱turning length 3500 mm︱control FAGOR ︱turning diameter over slide 550 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          •control FAGOR •Power 50 Kw •Turning diameter over bed 920 mm •Turning diameter over saddle 550 mm •Turning length 3.500 mm •Max speed 1.175 rpm. •Power chuck Ø630 mm •Steady-rest hydraulic Ø35-245 mm •Max. workpiece weight between centers + steady-rest 5.000 KG •Max. workpiece weight between centers 4.000 KG •Max. workpiece weight in chuck 1.200 KG
            turning diameter 920 mm
            turning length 3500 mm
            control FAGOR
            turning diameter over slide 550 mm
            Description :
            •control FAGOR
            •Power 50 Kw
            •Turning diameter over bed 920 mm
            •Turning diameter over saddle 550 mm
            •Turning length 3.500 mm
            •Max speed 1.175 rpm.
            •Power chuck Ø630 mm
            •Steady-rest hydraulic Ø35-245 mm
            •Max. workpiece weight between centers + steady-rest 5.000 KG
            •Max. workpiece weight between centers 4.000 KG
            •Max. workpiece weight in chuck 1.200 KG
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled VDF BOEHRINGER DUS 1000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08688 · Lathe - cycle-controlled

          VDF BOEHRINGER - DUS 1000 - - 1997 - Siemens 810 D

          Technical details
          turning diameter 1000 mm︱turning length 3000 mm︱control Siemens 810 D ︱total power requirement 60 kVA︱weight of the machine ca. 10,1 t︱dimensions of the machine ca. 5800 x 2050 x 2250 mm︱
          Swing diameter over bed 1000 mm Swing diameter over support 710 mm Distance between centers 3300 mm Center height 510 mm Bed width 560 mm CNC control Siemens Sinumerik 810 D Main spindle taper KK 11 DIN 55027 Spindle bore 128 mm Spindle speed 6.3 - 1600 1 / min. Spindle motor power 46 kW Feeds 0.01 - 50 mm / rev Rapid traverse 20 / 12.5 m / min Rice stick Quill holder MK 6 Quill diameter 125 m Quill stroke 280 mm Furnishing: Quick change tool holder MULTIFIX with various inserts Chip conveyor 4-jaw face plate diameter 900 mm Coolant system Steady rest, fixed Dimensions: Machine approx. 5.80 x 2.05 x 2.25 m Chip conveyor 5.60 x 0.95 x 1.50 m Control cabinet 1.80 x 0.50 x 1.60 m
            turning diameter 1000 mm
            turning length 3000 mm
            control Siemens 810 D
            total power requirement 60 kVA
            weight of the machine ca. 10,1 t
            dimensions of the machine ca. 5800 x 2050 x 2250 mm
            Description :
            Swing diameter over bed 1000 mm
            Swing diameter over support 710 mm
            Distance between centers 3300 mm
            Center height 510 mm
            Bed width 560 mm
            CNC control Siemens Sinumerik 810 D
            Main spindle taper KK 11 DIN 55027
            Spindle bore 128 mm
            Spindle speed 6.3 - 1600 1 / min.
            Spindle motor power 46 kW
            Feeds 0.01 - 50 mm / rev
            Rapid traverse 20 / 12.5 m / min
            Rice stick
            Quill holder MK 6
            Quill diameter 125 m
            Quill stroke 280 mm

            Furnishing:
            Quick change tool holder MULTIFIX with various inserts
            Chip conveyor
            4-jaw face plate diameter 900 mm
            Coolant system
            Steady rest, fixed

            Dimensions:
            Machine approx. 5.80 x 2.05 x 2.25 m
            Chip conveyor 5.60 x 0.95 x 1.50 m
            Control cabinet 1.80 x 0.50 x 1.60 m
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine GILDEMEISTER CTV 400 Linear


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2189 · Vertical Turning Machine

          GILDEMEISTER - CTV 400 Linear - - 2005 - Siemens 840 D powerline

          Technical details
          turning diameter 505 mm︱swing diameter 505 mm︱turning height 340 mm︱Control Siemens 840 D powerline ︱spindle turning speed - stepless 20 - 4000 U/min︱x-axis 1640 mm︱z-axis 340 mm︱rapid power traverse in X-and Z direction 90 / 40 m/min︱main drive motor 36 kW︱max. torque on the spindle 560 Nm︱turning speed range - milling max. 4000 U/min︱power capacity - milling spindle 11,3 kW︱total power requirement 50 kVA︱weight of the machine ca. 14 t︱dimensions of the machine ca. 5,1 x 3,3 x 3,35 m︱
          Equipped with: - CNC control Siemens 840 D powerline - C-axis - 12-station turret (VDI 50) with 12 driven stations - 3-jaw power chuck, diameter 315 mm - Workpiece loading device EWAB PS 820 with 5 off tables (diameter approx. 470 mm), workpiece weight max. 100 kg, band speed 8 m/min. - Workpiece measuring probe Renishaw - Swarf conveyor - Coolant equipment with paperband-filter unit - Coolant through spindle, 8/20 bar - approx. 30 x standard-toolholders (external + internal) - 2 x driven toolholders axial The turret has been overhauled in 2021.
            turning diameter 505 mm
            swing diameter 505 mm
            turning height 340 mm
            Control Siemens 840 D powerline
            spindle turning speed - stepless 20 - 4000 U/min
            x-axis 1640 mm
            z-axis 340 mm
            rapid power traverse in X-and Z . 90 / 40 m/min
            main drive motor 36 kW
            max. torque on the spindle 560 Nm
            turning speed range - milling max. 4000 U/min
            power capacity - milling spindle 11,3 kW
            total power requirement 50 kVA
            weight of the machine ca. 14 t
            dimensions of the machine ca. 5,1 x 3,3 x 3,35 m
            Description :
            Equipped with:
            - CNC control Siemens 840 D powerline
            - C-axis
            - 12-station turret (VDI 50) with 12 driven stations
            - 3-jaw power chuck, diameter 315 mm
            - Workpiece loading device EWAB PS 820 with 5 off tables (diameter approx. 470
            mm), workpiece weight max. 100 kg, band speed 8 m/min.
            - Workpiece measuring probe Renishaw
            - Swarf conveyor
            - Coolant equipment with paperband-filter unit
            - Coolant through spindle, 8/20 bar
            - approx. 30 x standard-toolholders (external + internal)
            - 2 x driven toolholders axial

            The turret has been overhauled in 2021.
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column STANKO 1L532F3


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05905 · Vertical Turret Lathe - Double Column

          STANKO - 1L532F3 - - 2005 -

          Technical details
          faceplate diameter 2800 mm︱swing diameter 3200 mm︱turning height 1600 mm︱workpiece weight max. 16 t︱faceplate turning speed range 0 - 80 U/min︱transmission ratio 2 ︱max. torque on the faceplate 28000 Nm︱cross rail adjustment - vertical 1240 mm︱cross rail - adjustment 360 mm/min︱ram head - cross travel 1720 mm︱ram head - vertical travel 1200 mm︱feed range 0,1 - 3000 mm/min︱rapid traverse 5 m/min︱main drive 51 kW︱Control ︱total power requirement kW︱weight of the machine ca. 43,0 t︱dimensions of the machine ca. 5,5 x 6,5 x 5,1 m︱
          * CNC control FAGOR 8055TC with 14" color screen * 2 vertical supports for holding double or triple steel holders * Diameter of the ball screws 80 mm * Simultaneous processing of the workpiece with both supports is possible * Rear guide of the horizontal slide made of hardened steel with Roller shoes * Gears made of chrome steel, hardened and ground * Electromagnetic clutch for stepless switching of the 2 speeds * Electro-mechanical clamping of the cross rail * Face plate supported by double bearing in adjustable radial cylindrical roller bearings * Central lubrication of the faceplate, the guideways and the gearbox * Steel telescopic covers * Machining at constant cutting speed
            faceplate diameter 2800 mm
            swing diameter 3200 mm
            turning height 1600 mm
            workpiece weight max. 16 t
            faceplate turning speed range 0 - 80 U/min
            transmission ratio 2
            max. torque on the faceplate 28000 Nm
            cross rail adjustment - vertical 1240 mm
            cross rail - adjustment 360 mm/min
            ram head - cross travel 1720 mm
            ram head - vertical travel 1200 mm
            feed range 0,1 - 3000 mm/min
            rapid traverse 5 m/min
            main drive 51 kW
            weight of the machine ca. 43,0 t
            dimensions of the machine ca. 5,5 x 6,5 x 5,1 m
            Description :
            * CNC control FAGOR 8055TC with 14" color screen
            * 2 vertical supports for holding double or triple steel holders
            * Diameter of the ball screws 80 mm
            * Simultaneous processing of the workpiece with both supports is possible
            * Rear guide of the horizontal slide made of hardened steel with
            Roller shoes
            * Gears made of chrome steel, hardened and ground
            * Electromagnetic clutch for stepless switching of the 2 speeds
            * Electro-mechanical clamping of the cross rail
            * Face plate supported by double bearing in adjustable radial cylindrical
            roller bearings
            * Central lubrication of the faceplate, the guideways and the gearbox
            * Steel telescopic covers
            * Machining at constant cutting speed
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column TOSHIBA-SHIBAURA TD 60 / 85


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08584 · Vertical Turret Lathe - Double Column

          TOSHIBA-SHIBAURA - TD 60 / 85 - - 1981/retrofit 2013 - Siemens 840 D

          Technical details
          faceplate diameter 6000 mm︱swing diameter 8500 mm︱turning height 4600 mm︱Control Siemens 840 D ︱table load 165 t︱total power requirement kW︱weight of the machine ca. 250-300 t︱dimensions of the machine ca. m︱
          CNC VTL with C-axis & milling unit Rebuild in 2013 with complete new servo motors and drives, control Siemens 840 D Specification : Turning diameter 8500 mm Turning height 4600 mm Table diameter 6000 mm Max. table loading capacity 165 tons Milling Ram size -450 X 500 mm Turning Ram size - 320 X 320 mm Milling Ram travel - 2000 mm Turning Ram travel - 2300 mm Tool taper ISO 50 With c-axis Milling function Main motor for c axis is 110 kw. New DC motor And for milling it is 5 kw servo motor with a big zero backlash gear box. Accessories and tooling with the machine.
            faceplate diameter 6000 mm
            swing diameter 8500 mm
            turning height 4600 mm
            Control Siemens 840 D
            table load 165 t
            weight of the machine ca. 250-300 t
            Description :
            CNC VTL with C-axis & milling unit

            Rebuild in 2013 with complete new servo motors and drives, control Siemens 840 D

            Specification :
            Turning diameter 8500 mm
            Turning height 4600 mm
            Table diameter 6000 mm
            Max. table loading capacity 165 tons
            Milling Ram size -450 X 500 mm
            Turning Ram size - 320 X 320 mm
            Milling Ram travel - 2000 mm
            Turning Ram travel - 2300 mm
            Tool taper ISO 50
            With c-axis
            Milling function
            Main motor for c axis is 110 kw. New DC motor
            And for milling it is 5 kw servo motor with a big zero backlash gear box.

            Accessories and tooling with the machine.

          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column Quqihar Heavy SMVTM 1600


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05553 · Vertical Turret Lathe - Single Column

          Quqihar Heavy - SMVTM 1600 - - 2011 - Siemens 840 D

          Technical details
          faceplate diameter 8000 mm︱swing diameter 16000 mm︱turning height 3000 mm︱Control Siemens 840 D ︱ram head - vertical travel 2500 mm︱workpiece weight 250 t︱faceplate speeds: 16 U/min︱ram head - vertical travel 2500 mm︱milling spindle turning speed range: 1000 U/min︱tool taper HSK 100 ︱main drive motor 132 kW︱total power requirement kW︱weight of the machine ca. 420 t︱dimensions of the machine ca. m︱
          - CNC-control SIEMENS 840 D - Boring and milling device - C-axis - Universal angular milling head
            faceplate diameter 8000 mm
            swing diameter 16000 mm
            turning height 3000 mm
            Control Siemens 840 D
            ram head - vertical travel 2500 mm
            workpiece weight 250 t
            faceplate speeds: 16 U/min
            ram head - vertical travel 2500 mm
            milling spindle turning speed ra. 1000 U/min
            tool taper HSK 100
            main drive motor 132 kW
            weight of the machine ca. 420 t
            Description :
            - CNC-control SIEMENS 840 D
            - Boring and milling device
            - C-axis
            - Universal angular milling head
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column DÖRRIES CTE 160


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05626 · Vertical Turret Lathe - Single Column

          DÖRRIES - CTE 160 - - 1977/2007 - Heidenhain

          Technical details
          faceplate diameter 1600 mm︱swing diameter 1800 mm︱turning height 1500 mm︱Control Heidenhain ︱max. ram stroke 1200 mm︱faceplate turning speed range 0 - 200 U/min︱main drive motor 85 kW︱workpiece weight max. 8000 kg︱total power requirement kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 8,4 x 4,5 x 5,3 m︱
          In 2007 geometrically overhauled and modernized (retrofit) * CNC-control HEIDENHAIN ManualPlus 4110 for following axes/spindles: - Right ram (axes X1 and Z1), faceplate (S) * D.R.O. make HEIDENHAIN ND 780 for following axes: - Left ram (axes X2 and Z2), crossrail * Two rams: - ram (right hand side) with 16-station ATC - ram (left hand side) with 4-station turret * Swarf conveyor
            faceplate diameter 1600 mm
            swing diameter 1800 mm
            turning height 1500 mm
            Control Heidenhain
            max. ram stroke 1200 mm
            faceplate turning speed range 0 - 200 U/min
            main drive motor 85 kW
            workpiece weight max. 8000 kg
            weight of the machine ca. 25 t
            dimensions of the machine ca. 8,4 x 4,5 x 5,3 m
            Description :
            In 2007 geometrically overhauled and modernized (retrofit)

            * CNC-control HEIDENHAIN ManualPlus 4110 for following axes/spindles:
            - Right ram (axes X1 and Z1), faceplate (S)
            * D.R.O. make HEIDENHAIN ND 780 for following axes:
            - Left ram (axes X2 and Z2), crossrail
            * Two rams:
            - ram (right hand side) with 16-station ATC
            - ram (left hand side) with 4-station turret
            * Swarf conveyor
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column DÖRRIES SD 140


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05555 · Vertical Turret Lathe - Single Column

          DÖRRIES - SD 140 - - 1976/2010 -

          Technical details
          faceplate diameter 1400 mm︱swing diameter 1780 mm︱turning height 1050 mm︱ram head - vertical travel 750 mm︱Control ︱total power requirement 55 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 3500 x 3500 x 3500 (4000) mm︱
          Retrofit 2010 Control HEIDENHAIN 4110
            faceplate diameter 1400 mm
            swing diameter 1780 mm
            turning height 1050 mm
            ram head - vertical travel 750 mm
            total power requirement 55 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 3500 x 3500 x 3500 (4000) mm
            Description :
            Retrofit 2010

            Control HEIDENHAIN 4110

          Datasheet
          Request / Contact

          Flange Drilling Machine

          used  Flange Drilling Machine ELHA


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05605 · Flange Drilling Machine

          ELHA - - - 2006 - SIEMENS 840 D

          Technical details
          bore capacity in steel (diameter) - mm︱max. pitch circle 1000 - 3000 mm︱number of spindles 1 ︱Control SIEMENS 840 D ︱table diameter 2800 mm︱table turning speeds 6 U/min︱workpiece weight max. 5000 kg︱travel -x axis 1000 mm︱travel -z axis 900 mm︱feed range 0 - 1200 mm/min︱rapid traverse 20 m/min︱workpiece diameter 1200 - 3200 mm︱workpiece height 50 - 300 mm︱distance spindle /table 200 / 1100 mm︱tool taper HSK-A 100 ︱spindle turning speed range 5 - 3800 U/min︱power capacity 30 kW︱total power requirement 60 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 9,0 x 8,0 x 4,5 m︱
          Used 1-spindle rotary table machining centre * CNC-control SIEMENS Sinumerik 840 D * Controlled axes: X, Z, C * 6-jaw power chuck
            bore capacity in steel (diameter. - mm
            max. pitch circle 1000 - 3000 mm
            number of spindles 1
            Control SIEMENS 840 D
            table diameter 2800 mm
            table turning speeds 6 U/min
            workpiece weight max. 5000 kg
            travel -x axis 1000 mm
            travel -z axis 900 mm
            feed range 0 - 1200 mm/min
            rapid traverse 20 m/min
            workpiece diameter 1200 - 3200 mm
            workpiece height 50 - 300 mm
            distance spindle /table 200 / 1100 mm
            tool taper HSK-A 100
            spindle turning speed range 5 - 3800 U/min
            power capacity 30 kW
            total power requirement 60 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 9,0 x 8,0 x 4,5 m
            Description :
            Used 1-spindle rotary table machining centre

            * CNC-control SIEMENS Sinumerik 840 D
            * Controlled axes: X, Z, C
            * 6-jaw power chuck
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Профиль трейдера: Knops Werkzeugmaschinen GmbH & Co. KG

          Связаться с торговцем



            Кнопс Веркцеугмашинен ГмбХ & Ко. КГ
           Конрад-Цузе-Штрассе 5
            40789 - Монхайм
            Германия
            02173 - 39494-0">02173 - 39494-0
            02173 - 39494-29
            maschinen@knops.de
            www.knops.de

          Профиль пользователя Trader




          Knops Werkzeugmaschinen GmbH  &  Co. KG   40789 - Monheim Konrad-Zuse-Straße 5 Deutschland
          Knops Werkzeugmaschinen GmbH & Co. KG

          Konrad-Zuse-Straße 5



          Contact Trader


            Knops Werkzeugmaschinen GmbH & Co. KG
           Konrad-Zuse-Straße 5
            40789 - Monheim
            Deutschland
            02173 - 39494-0
            02173 - 39494-29
            maschinen@knops.de
            www.knops.de
            Contact person:

           




          Machine category


          Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Brennschneidemaschine · Brennschneidmaschine · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Drehbarer Aufspanntisch · Drehmaschine - zyklengesteuert · Ersatzteile · Fahrständerfräsmaschine · Fixatoren · Flachschleifmaschine - Doppelständer · Flachschleifmaschine - Horizontal · Flanschenbohrmaschine · Fräseinrichtung · Führungsbahnenschleifmaschine · Gabelstapler - Diesel · Innenschleifmaschine · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Keilnutenziehmaschine · Keilwellenschleifmaschine · Konsolfräsmaschine · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Messmaschine · Plan- und Spitzendrehbank · Planscheibe · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Portal - Langhobelmaschine · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtaktmaschine · Rundtisch · Schweißdrehtisch - rund · Schwerdrehmaschine · Senkerodiermaschine · Stanz-Scher-Anlage · Stanzautomat-Doppelständer · Säge- und Bohranlage · Tafelschere - hydraulisch · Tieflochbohrmaschine · Tischbohrwerk · Vertikaldrehmaschine · Walzenschleifmaschine · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradprüfmaschine · Zahnradschleifmaschine · Zubehör ·